Ejemplo n.º 1
0
static CURLcode CONNECT(struct connectdata *conn,
                        int sockindex,
                        const char *hostname,
                        int remote_port)
{
  int subversion = 0;
  struct Curl_easy *data = conn->data;
  struct SingleRequest *k = &data->req;
  CURLcode result;
  curl_socket_t tunnelsocket = conn->sock[sockindex];
  struct http_connect_state *s = conn->connect_state;

#define SELECT_OK      0
#define SELECT_ERROR   1

  if(Curl_connect_complete(conn))
    return CURLE_OK; /* CONNECT is already completed */

  conn->bits.proxy_connect_closed = FALSE;

  do {
    timediff_t check;
    if(TUNNEL_INIT == s->tunnel_state) {
      /* BEGIN CONNECT PHASE */
      char *host_port;
      Curl_send_buffer *req_buffer;

      infof(data, "Establish HTTP proxy tunnel to %s:%d\n",
            hostname, remote_port);

        /* This only happens if we've looped here due to authentication
           reasons, and we don't really use the newly cloned URL here
           then. Just free() it. */
      free(data->req.newurl);
      data->req.newurl = NULL;

      /* initialize a dynamic send-buffer */
      req_buffer = Curl_add_buffer_init();

      if(!req_buffer)
        return CURLE_OUT_OF_MEMORY;

      host_port = aprintf("%s:%d", hostname, remote_port);
      if(!host_port) {
        Curl_add_buffer_free(req_buffer);
        return CURLE_OUT_OF_MEMORY;
      }

      /* Setup the proxy-authorization header, if any */
      result = Curl_http_output_auth(conn, "CONNECT", host_port, TRUE);

      free(host_port);

      if(!result) {
        char *host = NULL;
        const char *proxyconn = "";
        const char *useragent = "";
        const char *http = (conn->http_proxy.proxytype == CURLPROXY_HTTP_1_0) ?
          "1.0" : "1.1";
        bool ipv6_ip = conn->bits.ipv6_ip;
        char *hostheader;

        /* the hostname may be different */
        if(hostname != conn->host.name)
          ipv6_ip = (strchr(hostname, ':') != NULL);
        hostheader = /* host:port with IPv6 support */
          aprintf("%s%s%s:%d", ipv6_ip?"[":"", hostname, ipv6_ip?"]":"",
                  remote_port);
        if(!hostheader) {
          Curl_add_buffer_free(req_buffer);
          return CURLE_OUT_OF_MEMORY;
        }

        if(!Curl_checkProxyheaders(conn, "Host")) {
          host = aprintf("Host: %s\r\n", hostheader);
          if(!host) {
            free(hostheader);
            Curl_add_buffer_free(req_buffer);
            return CURLE_OUT_OF_MEMORY;
          }
        }
        if(!Curl_checkProxyheaders(conn, "Proxy-Connection"))
          proxyconn = "Proxy-Connection: Keep-Alive\r\n";

        if(!Curl_checkProxyheaders(conn, "User-Agent") &&
           data->set.str[STRING_USERAGENT])
          useragent = conn->allocptr.uagent;

        result =
          Curl_add_bufferf(req_buffer,
                           "CONNECT %s HTTP/%s\r\n"
                           "%s"  /* Host: */
                           "%s"  /* Proxy-Authorization */
                           "%s"  /* User-Agent */
                           "%s", /* Proxy-Connection */
                           hostheader,
                           http,
                           host?host:"",
                           conn->allocptr.proxyuserpwd?
                           conn->allocptr.proxyuserpwd:"",
                           useragent,
                           proxyconn);

        if(host)
          free(host);
        free(hostheader);

        if(!result)
          result = Curl_add_custom_headers(conn, TRUE, req_buffer);

        if(!result)
          /* CRLF terminate the request */
          result = Curl_add_bufferf(req_buffer, "\r\n");

        if(!result) {
          /* Send the connect request to the proxy */
          /* BLOCKING */
          result =
            Curl_add_buffer_send(req_buffer, conn,
                                 &data->info.request_size, 0, sockindex);
        }
        req_buffer = NULL;
        if(result)
          failf(data, "Failed sending CONNECT to proxy");
      }

      Curl_add_buffer_free(req_buffer);
      if(result)
        return result;

      s->tunnel_state = TUNNEL_CONNECT;
      s->perline = 0;
    } /* END CONNECT PHASE */

    check = Curl_timeleft(data, NULL, TRUE);
    if(check <= 0) {
      failf(data, "Proxy CONNECT aborted due to timeout");
      return CURLE_OPERATION_TIMEDOUT;
    }

    if(!Curl_conn_data_pending(conn, sockindex))
      /* return so we'll be called again polling-style */
      return CURLE_OK;

    /* at this point, the tunnel_connecting phase is over. */

    { /* READING RESPONSE PHASE */
      int error = SELECT_OK;

      while(s->keepon && !error) {
        ssize_t gotbytes;

        /* make sure we have space to read more data */
        if(s->ptr >= &s->connect_buffer[CONNECT_BUFFER_SIZE]) {
          failf(data, "CONNECT response too large!");
          return CURLE_RECV_ERROR;
        }

        /* Read one byte at a time to avoid a race condition. Wait at most one
           second before looping to ensure continuous pgrsUpdates. */
        result = Curl_read(conn, tunnelsocket, s->ptr, 1, &gotbytes);
        if(result == CURLE_AGAIN)
          /* socket buffer drained, return */
          return CURLE_OK;

        if(Curl_pgrsUpdate(conn))
          return CURLE_ABORTED_BY_CALLBACK;

        if(result) {
          s->keepon = FALSE;
          break;
        }
        else if(gotbytes <= 0) {
          if(data->set.proxyauth && data->state.authproxy.avail) {
            /* proxy auth was requested and there was proxy auth available,
               then deem this as "mere" proxy disconnect */
            conn->bits.proxy_connect_closed = TRUE;
            infof(data, "Proxy CONNECT connection closed\n");
          }
          else {
            error = SELECT_ERROR;
            failf(data, "Proxy CONNECT aborted");
          }
          s->keepon = FALSE;
          break;
        }


        if(s->keepon > TRUE) {
          /* This means we are currently ignoring a response-body */

          s->ptr = s->connect_buffer;
          if(s->cl) {
            /* A Content-Length based body: simply count down the counter
               and make sure to break out of the loop when we're done! */
            s->cl--;
            if(s->cl <= 0) {
              s->keepon = FALSE;
              s->tunnel_state = TUNNEL_COMPLETE;
              break;
            }
          }
          else {
            /* chunked-encoded body, so we need to do the chunked dance
               properly to know when the end of the body is reached */
            CHUNKcode r;
            ssize_t tookcareof = 0;

            /* now parse the chunked piece of data so that we can
               properly tell when the stream ends */
            r = Curl_httpchunk_read(conn, s->ptr, 1, &tookcareof);
            if(r == CHUNKE_STOP) {
              /* we're done reading chunks! */
              infof(data, "chunk reading DONE\n");
              s->keepon = FALSE;
              /* we did the full CONNECT treatment, go COMPLETE */
              s->tunnel_state = TUNNEL_COMPLETE;
            }
          }
          continue;
        }

        s->perline++; /* amount of bytes in this line so far */

        /* if this is not the end of a header line then continue */
        if(*s->ptr != 0x0a) {
          s->ptr++;
          continue;
        }

        /* convert from the network encoding */
        result = Curl_convert_from_network(data, s->line_start,
                                           (size_t)s->perline);
        /* Curl_convert_from_network calls failf if unsuccessful */
        if(result)
          return result;

        /* output debug if that is requested */
        if(data->set.verbose)
          Curl_debug(data, CURLINFO_HEADER_IN,
                     s->line_start, (size_t)s->perline);

        if(!data->set.suppress_connect_headers) {
          /* send the header to the callback */
          int writetype = CLIENTWRITE_HEADER;
          if(data->set.include_header)
            writetype |= CLIENTWRITE_BODY;

          result = Curl_client_write(conn, writetype,
                                     s->line_start, s->perline);
          if(result)
            return result;
        }

        data->info.header_size += (long)s->perline;
        data->req.headerbytecount += (long)s->perline;

        /* Newlines are CRLF, so the CR is ignored as the line isn't
           really terminated until the LF comes. Treat a following CR
           as end-of-headers as well.*/

        if(('\r' == s->line_start[0]) ||
           ('\n' == s->line_start[0])) {
          /* end of response-headers from the proxy */
          s->ptr = s->connect_buffer;
          if((407 == k->httpcode) && !data->state.authproblem) {
            /* If we get a 407 response code with content length
               when we have no auth problem, we must ignore the
               whole response-body */
            s->keepon = 2;

            if(s->cl) {
              infof(data, "Ignore %" CURL_FORMAT_CURL_OFF_T
                    " bytes of response-body\n", s->cl);
            }
            else if(s->chunked_encoding) {
              CHUNKcode r;

              infof(data, "Ignore chunked response-body\n");

              /* We set ignorebody true here since the chunked
                 decoder function will acknowledge that. Pay
                 attention so that this is cleared again when this
                 function returns! */
              k->ignorebody = TRUE;

              if(s->line_start[1] == '\n') {
                /* this can only be a LF if the letter at index 0
                   was a CR */
                s->line_start++;
              }

              /* now parse the chunked piece of data so that we can
                 properly tell when the stream ends */
              r = Curl_httpchunk_read(conn, s->line_start + 1, 1, &gotbytes);
              if(r == CHUNKE_STOP) {
                /* we're done reading chunks! */
                infof(data, "chunk reading DONE\n");
                s->keepon = FALSE;
                /* we did the full CONNECT treatment, go to COMPLETE */
                s->tunnel_state = TUNNEL_COMPLETE;
              }
            }
            else {
              /* without content-length or chunked encoding, we
                 can't keep the connection alive since the close is
                 the end signal so we bail out at once instead */
              s->keepon = FALSE;
            }
          }
          else
            s->keepon = FALSE;
          if(!s->cl)
            /* we did the full CONNECT treatment, go to COMPLETE */
            s->tunnel_state = TUNNEL_COMPLETE;
          continue;
        }

        s->line_start[s->perline] = 0; /* zero terminate the buffer */
        if((checkprefix("WWW-Authenticate:", s->line_start) &&
            (401 == k->httpcode)) ||
           (checkprefix("Proxy-authenticate:", s->line_start) &&
            (407 == k->httpcode))) {

          bool proxy = (k->httpcode == 407) ? TRUE : FALSE;
          char *auth = Curl_copy_header_value(s->line_start);
          if(!auth)
            return CURLE_OUT_OF_MEMORY;

          result = Curl_http_input_auth(conn, proxy, auth);

          free(auth);

          if(result)
            return result;
        }
        else if(checkprefix("Content-Length:", s->line_start)) {
          if(k->httpcode/100 == 2) {
            /* A client MUST ignore any Content-Length or Transfer-Encoding
               header fields received in a successful response to CONNECT.
               "Successful" described as: 2xx (Successful). RFC 7231 4.3.6 */
            infof(data, "Ignoring Content-Length in CONNECT %03d response\n",
                  k->httpcode);
          }
          else {
            (void)curlx_strtoofft(s->line_start +
                                  strlen("Content-Length:"), NULL, 10, &s->cl);
          }
        }
        else if(Curl_compareheader(s->line_start, "Connection:", "close"))
          s->close_connection = TRUE;
        else if(checkprefix("Transfer-Encoding:", s->line_start)) {
          if(k->httpcode/100 == 2) {
            /* A client MUST ignore any Content-Length or Transfer-Encoding
               header fields received in a successful response to CONNECT.
               "Successful" described as: 2xx (Successful). RFC 7231 4.3.6 */
            infof(data, "Ignoring Transfer-Encoding in "
                  "CONNECT %03d response\n", k->httpcode);
          }
          else if(Curl_compareheader(s->line_start,
                                     "Transfer-Encoding:", "chunked")) {
            infof(data, "CONNECT responded chunked\n");
            s->chunked_encoding = TRUE;
            /* init our chunky engine */
            Curl_httpchunk_init(conn);
          }
        }
        else if(Curl_compareheader(s->line_start,
                                   "Proxy-Connection:", "close"))
          s->close_connection = TRUE;
        else if(2 == sscanf(s->line_start, "HTTP/1.%d %d",
                            &subversion,
                            &k->httpcode)) {
          /* store the HTTP code from the proxy */
          data->info.httpproxycode = k->httpcode;
        }

        s->perline = 0; /* line starts over here */
        s->ptr = s->connect_buffer;
        s->line_start = s->ptr;
      } /* while there's buffer left and loop is requested */

      if(Curl_pgrsUpdate(conn))
        return CURLE_ABORTED_BY_CALLBACK;

      if(error)
        return CURLE_RECV_ERROR;

      if(data->info.httpproxycode/100 != 2) {
        /* Deal with the possibly already received authenticate
           headers. 'newurl' is set to a new URL if we must loop. */
        result = Curl_http_auth_act(conn);
        if(result)
          return result;

        if(conn->bits.close)
          /* the connection has been marked for closure, most likely in the
             Curl_http_auth_act() function and thus we can kill it at once
             below */
          s->close_connection = TRUE;
      }

      if(s->close_connection && data->req.newurl) {
        /* Connection closed by server. Don't use it anymore */
        Curl_closesocket(conn, conn->sock[sockindex]);
        conn->sock[sockindex] = CURL_SOCKET_BAD;
        break;
      }
    } /* END READING RESPONSE PHASE */

    /* If we are supposed to continue and request a new URL, which basically
     * means the HTTP authentication is still going on so if the tunnel
     * is complete we start over in INIT state */
    if(data->req.newurl && (TUNNEL_COMPLETE == s->tunnel_state)) {
      connect_init(conn, TRUE); /* reinit */
    }

  } while(data->req.newurl);

  if(data->info.httpproxycode/100 != 2) {
    if(s->close_connection && data->req.newurl) {
      conn->bits.proxy_connect_closed = TRUE;
      infof(data, "Connect me again please\n");
      connect_done(conn);
    }
    else {
      free(data->req.newurl);
      data->req.newurl = NULL;
      /* failure, close this connection to avoid re-use */
      streamclose(conn, "proxy CONNECT failure");
      Curl_closesocket(conn, conn->sock[sockindex]);
      conn->sock[sockindex] = CURL_SOCKET_BAD;
    }

    /* to back to init state */
    s->tunnel_state = TUNNEL_INIT;

    if(conn->bits.proxy_connect_closed)
      /* this is not an error, just part of the connection negotiation */
      return CURLE_OK;
    failf(data, "Received HTTP code %d from proxy after CONNECT",
          data->req.httpcode);
    return CURLE_RECV_ERROR;
  }

  s->tunnel_state = TUNNEL_COMPLETE;

  /* If a proxy-authorization header was used for the proxy, then we should
     make sure that it isn't accidentally used for the document request
     after we've connected. So let's free and clear it here. */
  Curl_safefree(conn->allocptr.proxyuserpwd);
  conn->allocptr.proxyuserpwd = NULL;

  data->state.authproxy.done = TRUE;

  infof(data, "Proxy replied %d to CONNECT request\n",
        data->info.httpproxycode);
  data->req.ignorebody = FALSE; /* put it (back) to non-ignore state */
  conn->bits.rewindaftersend = FALSE; /* make sure this isn't set for the
                                         document request  */
  return CURLE_OK;
}
Ejemplo n.º 2
0
CURLcode Curl_proxyCONNECT(struct connectdata *conn,
                           int sockindex,
                           const char *hostname,
                           unsigned short remote_port)
{
  int subversion=0;
  struct SessionHandle *data=conn->data;
  struct SingleRequest *k = &data->req;
  CURLcode result;
  long timeout =
    data->set.timeout?data->set.timeout:PROXY_TIMEOUT; /* in milliseconds */
  curl_socket_t tunnelsocket = conn->sock[sockindex];
  curl_off_t cl=0;
  bool closeConnection = FALSE;
  bool chunked_encoding = FALSE;
  long check;

#define SELECT_OK      0
#define SELECT_ERROR   1
#define SELECT_TIMEOUT 2
  int error = SELECT_OK;

  if(conn->tunnel_state[sockindex] == TUNNEL_COMPLETE)
    return CURLE_OK; /* CONNECT is already completed */

  conn->bits.proxy_connect_closed = FALSE;

  do {
    if(TUNNEL_INIT == conn->tunnel_state[sockindex]) {
      /* BEGIN CONNECT PHASE */
      char *host_port;
      Curl_send_buffer *req_buffer;

      infof(data, "Establish HTTP proxy tunnel to %s:%hu\n",
            hostname, remote_port);

      if(data->req.newurl) {
        /* This only happens if we've looped here due to authentication
           reasons, and we don't really use the newly cloned URL here
           then. Just free() it. */
        free(data->req.newurl);
        data->req.newurl = NULL;
      }

      /* initialize a dynamic send-buffer */
      req_buffer = Curl_add_buffer_init();

      if(!req_buffer)
        return CURLE_OUT_OF_MEMORY;

      host_port = aprintf("%s:%hu", hostname, remote_port);
      if(!host_port) {
        free(req_buffer);
        return CURLE_OUT_OF_MEMORY;
      }

      /* Setup the proxy-authorization header, if any */
      result = Curl_http_output_auth(conn, "CONNECT", host_port, TRUE);

      free(host_port);

      if(CURLE_OK == result) {
        char *host=(char *)"";
        const char *proxyconn="";
        const char *useragent="";
        const char *http = (conn->proxytype == CURLPROXY_HTTP_1_0) ?
          "1.0" : "1.1";
        char *hostheader= /* host:port with IPv6 support */
          aprintf("%s%s%s:%hu", conn->bits.ipv6_ip?"[":"",
                  hostname, conn->bits.ipv6_ip?"]":"",
                  remote_port);
        if(!hostheader) {
          free(req_buffer);
          return CURLE_OUT_OF_MEMORY;
        }

        if(!Curl_checkheaders(data, "Host:")) {
          host = aprintf("Host: %s\r\n", hostheader);
          if(!host) {
            free(hostheader);
            free(req_buffer);
            return CURLE_OUT_OF_MEMORY;
          }
        }
        if(!Curl_checkheaders(data, "Proxy-Connection:"))
          proxyconn = "Proxy-Connection: Keep-Alive\r\n";

        if(!Curl_checkheaders(data, "User-Agent:") &&
           data->set.str[STRING_USERAGENT])
          useragent = conn->allocptr.uagent;

        result =
          Curl_add_bufferf(req_buffer,
                           "CONNECT %s HTTP/%s\r\n"
                           "%s"  /* Host: */
                           "%s"  /* Proxy-Authorization */
                           "%s"  /* User-Agent */
                           "%s", /* Proxy-Connection */
                           hostheader,
                           http,
                           host,
                           conn->allocptr.proxyuserpwd?
                           conn->allocptr.proxyuserpwd:"",
                           useragent,
                           proxyconn);

        if(host && *host)
          free(host);
        free(hostheader);

        if(CURLE_OK == result)
          result = Curl_add_custom_headers(conn, req_buffer);

        if(CURLE_OK == result)
          /* CRLF terminate the request */
          result = Curl_add_bufferf(req_buffer, "\r\n");

        if(CURLE_OK == result) {
          /* Send the connect request to the proxy */
          /* BLOCKING */
          result =
            Curl_add_buffer_send(req_buffer, conn,
                                 &data->info.request_size, 0, sockindex);
        }
        req_buffer = NULL;
        if(result)
          failf(data, "Failed sending CONNECT to proxy");
      }

      Curl_safefree(req_buffer);
      if(result)
        return result;

      conn->tunnel_state[sockindex] = TUNNEL_CONNECT;

      /* now we've issued the CONNECT and we're waiting to hear back, return
         and get called again polling-style */
      return CURLE_OK;

    } /* END CONNECT PHASE */

    { /* BEGIN NEGOTIATION PHASE */
      size_t nread;   /* total size read */
      int perline; /* count bytes per line */
      int keepon=TRUE;
      ssize_t gotbytes;
      char *ptr;
      char *line_start;

      ptr=data->state.buffer;
      line_start = ptr;

      nread=0;
      perline=0;
      keepon=TRUE;

      while((nread<BUFSIZE) && (keepon && !error)) {

        /* if timeout is requested, find out how much remaining time we have */
        check = timeout - /* timeout time */
          Curl_tvdiff(Curl_tvnow(), conn->now); /* spent time */
        if(check <= 0) {
          failf(data, "Proxy CONNECT aborted due to timeout");
          error = SELECT_TIMEOUT; /* already too little time */
          break;
        }

        /* loop every second at least, less if the timeout is near */
        switch (Curl_socket_ready(tunnelsocket, CURL_SOCKET_BAD,
                                  check<1000L?check:1000)) {
        case -1: /* select() error, stop reading */
          error = SELECT_ERROR;
          failf(data, "Proxy CONNECT aborted due to select/poll error");
          break;
        case 0: /* timeout */
          break;
        default:
          DEBUGASSERT(ptr+BUFSIZE-nread <= data->state.buffer+BUFSIZE+1);
          result = Curl_read(conn, tunnelsocket, ptr, BUFSIZE-nread,
                             &gotbytes);
          if(result==CURLE_AGAIN)
            continue; /* go loop yourself */
          else if(result)
            keepon = FALSE;
          else if(gotbytes <= 0) {
            keepon = FALSE;
            if(data->set.proxyauth && data->state.authproxy.avail) {
              /* proxy auth was requested and there was proxy auth available,
                 then deem this as "mere" proxy disconnect */
              conn->bits.proxy_connect_closed = TRUE;
            }
            else {
              error = SELECT_ERROR;
              failf(data, "Proxy CONNECT aborted");
            }
          }
          else {
            /*
             * We got a whole chunk of data, which can be anything from one
             * byte to a set of lines and possibly just a piece of the last
             * line.
             */
            int i;

            nread += gotbytes;

            if(keepon > TRUE) {
              /* This means we are currently ignoring a response-body */

              nread = 0; /* make next read start over in the read buffer */
              ptr=data->state.buffer;
              if(cl) {
                /* A Content-Length based body: simply count down the counter
                   and make sure to break out of the loop when we're done! */
                cl -= gotbytes;
                if(cl<=0) {
                  keepon = FALSE;
                  break;
                }
              }
              else {
                /* chunked-encoded body, so we need to do the chunked dance
                   properly to know when the end of the body is reached */
                CHUNKcode r;
                ssize_t tookcareof=0;

                /* now parse the chunked piece of data so that we can
                   properly tell when the stream ends */
                r = Curl_httpchunk_read(conn, ptr, gotbytes, &tookcareof);
                if(r == CHUNKE_STOP) {
                  /* we're done reading chunks! */
                  infof(data, "chunk reading DONE\n");
                  keepon = FALSE;
                  /* we did the full CONNECT treatment, go COMPLETE */
                  conn->tunnel_state[sockindex] = TUNNEL_COMPLETE;
                }
                else
                  infof(data, "Read %zd bytes of chunk, continue\n",
                        tookcareof);
              }
            }
            else
              for(i = 0; i < gotbytes; ptr++, i++) {
                perline++; /* amount of bytes in this line so far */
                if(*ptr == 0x0a) {
                  char letter;
                  int writetype;

                  /* convert from the network encoding */
                  result = Curl_convert_from_network(data, line_start,
                                                     perline);
                  /* Curl_convert_from_network calls failf if unsuccessful */
                  if(result)
                    return result;

                  /* output debug if that is requested */
                  if(data->set.verbose)
                    Curl_debug(data, CURLINFO_HEADER_IN,
                               line_start, (size_t)perline, conn);

                  /* send the header to the callback */
                  writetype = CLIENTWRITE_HEADER;
                  if(data->set.include_header)
                    writetype |= CLIENTWRITE_BODY;

                  result = Curl_client_write(conn, writetype, line_start,
                                             perline);

                  data->info.header_size += (long)perline;
                  data->req.headerbytecount += (long)perline;

                  if(result)
                    return result;

                  /* Newlines are CRLF, so the CR is ignored as the line isn't
                     really terminated until the LF comes. Treat a following CR
                     as end-of-headers as well.*/

                  if(('\r' == line_start[0]) ||
                     ('\n' == line_start[0])) {
                    /* end of response-headers from the proxy */
                    nread = 0; /* make next read start over in the read
                                  buffer */
                    ptr=data->state.buffer;
                    if((407 == k->httpcode) && !data->state.authproblem) {
                      /* If we get a 407 response code with content length
                         when we have no auth problem, we must ignore the
                         whole response-body */
                      keepon = 2;

                      if(cl) {

                        infof(data, "Ignore %" FORMAT_OFF_T
                              " bytes of response-body\n", cl);
                        /* remove the remaining chunk of what we already
                           read */
                        cl -= (gotbytes - i);

                        if(cl<=0)
                          /* if the whole thing was already read, we are done!
                           */
                          keepon=FALSE;
                      }
                      else if(chunked_encoding) {
                        CHUNKcode r;
                        /* We set ignorebody true here since the chunked
                           decoder function will acknowledge that. Pay
                           attention so that this is cleared again when this
                           function returns! */
                        k->ignorebody = TRUE;
                        infof(data, "%zd bytes of chunk left\n", gotbytes-i);

                        if(line_start[1] == '\n') {
                          /* this can only be a LF if the letter at index 0
                             was a CR */
                          line_start++;
                          i++;
                        }

                        /* now parse the chunked piece of data so that we can
                           properly tell when the stream ends */
                        r = Curl_httpchunk_read(conn, line_start+1,
                                                  gotbytes -i, &gotbytes);
                        if(r == CHUNKE_STOP) {
                          /* we're done reading chunks! */
                          infof(data, "chunk reading DONE\n");
                          keepon = FALSE;
                          /* we did the full CONNECT treatment, go to
                             COMPLETE */
                          conn->tunnel_state[sockindex] = TUNNEL_COMPLETE;
                        }
                        else
                          infof(data, "Read %zd bytes of chunk, continue\n",
                                gotbytes);
                      }
                      else {
                        /* without content-length or chunked encoding, we
                           can't keep the connection alive since the close is
                           the end signal so we bail out at once instead */
                        keepon=FALSE;
                      }
                    }
                    else {
                      keepon = FALSE;
                      if(200 == data->info.httpproxycode) {
                        if(gotbytes - (i+1))
                          failf(data, "Proxy CONNECT followed by %zd bytes "
                                "of opaque data. Data ignored (known bug #39)",
                                gotbytes - (i+1));
                      }
                    }
                    /* we did the full CONNECT treatment, go to COMPLETE */
                    conn->tunnel_state[sockindex] = TUNNEL_COMPLETE;
                    break; /* breaks out of for-loop, not switch() */
                  }

                  /* keep a backup of the position we are about to blank */
                  letter = line_start[perline];
                  line_start[perline]=0; /* zero terminate the buffer */
                  if((checkprefix("WWW-Authenticate:", line_start) &&
                      (401 == k->httpcode)) ||
                     (checkprefix("Proxy-authenticate:", line_start) &&
                      (407 == k->httpcode))) {
                    result = Curl_http_input_auth(conn, k->httpcode,
                                                  line_start);
                    if(result)
                      return result;
                  }
                  else if(checkprefix("Content-Length:", line_start)) {
                    cl = curlx_strtoofft(line_start +
                                         strlen("Content-Length:"), NULL, 10);
                  }
                  else if(Curl_compareheader(line_start,
                                             "Connection:", "close"))
                    closeConnection = TRUE;
                  else if(Curl_compareheader(line_start,
                                             "Transfer-Encoding:",
                                             "chunked")) {
                    infof(data, "CONNECT responded chunked\n");
                    chunked_encoding = TRUE;
                    /* init our chunky engine */
                    Curl_httpchunk_init(conn);
                  }
                  else if(Curl_compareheader(line_start,
                                             "Proxy-Connection:", "close"))
                    closeConnection = TRUE;
                  else if(2 == sscanf(line_start, "HTTP/1.%d %d",
                                      &subversion,
                                      &k->httpcode)) {
                    /* store the HTTP code from the proxy */
                    data->info.httpproxycode = k->httpcode;
                  }
                  /* put back the letter we blanked out before */
                  line_start[perline]= letter;

                  perline=0; /* line starts over here */
                  line_start = ptr+1; /* this skips the zero byte we wrote */
                }
              }
          }
          break;
        } /* switch */
        if(Curl_pgrsUpdate(conn))
          return CURLE_ABORTED_BY_CALLBACK;
      } /* while there's buffer left and loop is requested */

      if(error)
        return CURLE_RECV_ERROR;

      if(data->info.httpproxycode != 200) {
        /* Deal with the possibly already received authenticate
           headers. 'newurl' is set to a new URL if we must loop. */
        result = Curl_http_auth_act(conn);
        if(result)
          return result;

        if(conn->bits.close)
          /* the connection has been marked for closure, most likely in the
             Curl_http_auth_act() function and thus we can kill it at once
             below
          */
          closeConnection = TRUE;
      }

      if(closeConnection && data->req.newurl) {
        /* Connection closed by server. Don't use it anymore */
        Curl_closesocket(conn, conn->sock[sockindex]);
        conn->sock[sockindex] = CURL_SOCKET_BAD;
        break;
      }
    } /* END NEGOTIATION PHASE */

    /* If we are supposed to continue and request a new URL, which basically
     * means the HTTP authentication is still going on so if the tunnel
     * is complete we start over in INIT state */
    if(data->req.newurl &&
       (TUNNEL_COMPLETE == conn->tunnel_state[sockindex])) {
      conn->tunnel_state[sockindex] = TUNNEL_INIT;
      infof(data, "TUNNEL_STATE switched to: %d\n",
            conn->tunnel_state[sockindex]);
    }

  } while(data->req.newurl);

  if(200 != data->req.httpcode) {
    failf(data, "Received HTTP code %d from proxy after CONNECT",
          data->req.httpcode);

    if(closeConnection && data->req.newurl)
      conn->bits.proxy_connect_closed = TRUE;

    if(data->req.newurl) {
      /* this won't be used anymore for the CONNECT so free it now */
      free(data->req.newurl);
      data->req.newurl = NULL;
    }

    /* to back to init state */
    conn->tunnel_state[sockindex] = TUNNEL_INIT;

    return CURLE_RECV_ERROR;
  }

  conn->tunnel_state[sockindex] = TUNNEL_COMPLETE;

  /* If a proxy-authorization header was used for the proxy, then we should
     make sure that it isn't accidentally used for the document request
     after we've connected. So let's free and clear it here. */
  Curl_safefree(conn->allocptr.proxyuserpwd);
  conn->allocptr.proxyuserpwd = NULL;

  data->state.authproxy.done = TRUE;

  infof (data, "Proxy replied OK to CONNECT request\n");
  data->req.ignorebody = FALSE; /* put it (back) to non-ignore state */
  conn->bits.rewindaftersend = FALSE; /* make sure this isn't set for the
                                         document request  */
  return CURLE_OK;
}
Ejemplo n.º 3
0
static CURLcode rtsp_do(struct connectdata *conn, bool *done)
{
  struct Curl_easy *data = conn->data;
  CURLcode result = CURLE_OK;
  Curl_RtspReq rtspreq = data->set.rtspreq;
  struct RTSP *rtsp = data->req.protop;
  struct HTTP *http;
  Curl_send_buffer *req_buffer;
  curl_off_t postsize = 0; /* for ANNOUNCE and SET_PARAMETER */
  curl_off_t putsize = 0; /* for ANNOUNCE and SET_PARAMETER */

  const char *p_request = NULL;
  const char *p_session_id = NULL;
  const char *p_accept = NULL;
  const char *p_accept_encoding = NULL;
  const char *p_range = NULL;
  const char *p_referrer = NULL;
  const char *p_stream_uri = NULL;
  const char *p_transport = NULL;
  const char *p_uagent = NULL;
  const char *p_proxyuserpwd = NULL;
  const char *p_userpwd = NULL;

  *done = TRUE;

  http = &(rtsp->http_wrapper);
  /* Assert that no one has changed the RTSP struct in an evil way */
  DEBUGASSERT((void *)http == (void *)rtsp);

  rtsp->CSeq_sent = data->state.rtsp_next_client_CSeq;
  rtsp->CSeq_recv = 0;

  /* Setup the 'p_request' pointer to the proper p_request string
   * Since all RTSP requests are included here, there is no need to
   * support custom requests like HTTP.
   **/
  data->set.opt_no_body = TRUE; /* most requests don't contain a body */
  switch(rtspreq) {
  default:
    failf(data, "Got invalid RTSP request");
    return CURLE_BAD_FUNCTION_ARGUMENT;
  case RTSPREQ_OPTIONS:
    p_request = "OPTIONS";
    break;
  case RTSPREQ_DESCRIBE:
    p_request = "DESCRIBE";
    data->set.opt_no_body = FALSE;
    break;
  case RTSPREQ_ANNOUNCE:
    p_request = "ANNOUNCE";
    break;
  case RTSPREQ_SETUP:
    p_request = "SETUP";
    break;
  case RTSPREQ_PLAY:
    p_request = "PLAY";
    break;
  case RTSPREQ_PAUSE:
    p_request = "PAUSE";
    break;
  case RTSPREQ_TEARDOWN:
    p_request = "TEARDOWN";
    break;
  case RTSPREQ_GET_PARAMETER:
    /* GET_PARAMETER's no_body status is determined later */
    p_request = "GET_PARAMETER";
    data->set.opt_no_body = FALSE;
    break;
  case RTSPREQ_SET_PARAMETER:
    p_request = "SET_PARAMETER";
    break;
  case RTSPREQ_RECORD:
    p_request = "RECORD";
    break;
  case RTSPREQ_RECEIVE:
    p_request = "";
    /* Treat interleaved RTP as body*/
    data->set.opt_no_body = FALSE;
    break;
  case RTSPREQ_LAST:
    failf(data, "Got invalid RTSP request: RTSPREQ_LAST");
    return CURLE_BAD_FUNCTION_ARGUMENT;
  }

  if(rtspreq == RTSPREQ_RECEIVE) {
    Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE,
                        &http->readbytecount, -1, NULL);

    return result;
  }

  p_session_id = data->set.str[STRING_RTSP_SESSION_ID];
  if(!p_session_id &&
     (rtspreq & ~(RTSPREQ_OPTIONS | RTSPREQ_DESCRIBE | RTSPREQ_SETUP))) {
    failf(data, "Refusing to issue an RTSP request [%s] without a session ID.",
          p_request);
    return CURLE_BAD_FUNCTION_ARGUMENT;
  }

  /* TODO: proxy? */

  /* Stream URI. Default to server '*' if not specified */
  if(data->set.str[STRING_RTSP_STREAM_URI]) {
    p_stream_uri = data->set.str[STRING_RTSP_STREAM_URI];
  }
  else {
    p_stream_uri = "*";
  }

  /* Transport Header for SETUP requests */
  p_transport = Curl_checkheaders(conn, "Transport:");
  if(rtspreq == RTSPREQ_SETUP && !p_transport) {
    /* New Transport: setting? */
    if(data->set.str[STRING_RTSP_TRANSPORT]) {
      Curl_safefree(conn->allocptr.rtsp_transport);

      conn->allocptr.rtsp_transport =
        aprintf("Transport: %s\r\n",
                data->set.str[STRING_RTSP_TRANSPORT]);
      if(!conn->allocptr.rtsp_transport)
        return CURLE_OUT_OF_MEMORY;
    }
    else {
      failf(data,
            "Refusing to issue an RTSP SETUP without a Transport: header.");
      return CURLE_BAD_FUNCTION_ARGUMENT;
    }

    p_transport = conn->allocptr.rtsp_transport;
  }

  /* Accept Headers for DESCRIBE requests */
  if(rtspreq == RTSPREQ_DESCRIBE) {
    /* Accept Header */
    p_accept = Curl_checkheaders(conn, "Accept:")?
      NULL:"Accept: application/sdp\r\n";

    /* Accept-Encoding header */
    if(!Curl_checkheaders(conn, "Accept-Encoding:") &&
       data->set.str[STRING_ENCODING]) {
      Curl_safefree(conn->allocptr.accept_encoding);
      conn->allocptr.accept_encoding =
        aprintf("Accept-Encoding: %s\r\n", data->set.str[STRING_ENCODING]);

      if(!conn->allocptr.accept_encoding)
        return CURLE_OUT_OF_MEMORY;

      p_accept_encoding = conn->allocptr.accept_encoding;
    }
  }

  /* The User-Agent string might have been allocated in url.c already, because
     it might have been used in the proxy connect, but if we have got a header
     with the user-agent string specified, we erase the previously made string
     here. */
  if(Curl_checkheaders(conn, "User-Agent:") && conn->allocptr.uagent) {
    Curl_safefree(conn->allocptr.uagent);
    conn->allocptr.uagent = NULL;
  }
  else if(!Curl_checkheaders(conn, "User-Agent:") &&
          data->set.str[STRING_USERAGENT]) {
    p_uagent = conn->allocptr.uagent;
  }

  /* setup the authentication headers */
  result = Curl_http_output_auth(conn, p_request, p_stream_uri, FALSE);
  if(result)
    return result;

  p_proxyuserpwd = conn->allocptr.proxyuserpwd;
  p_userpwd = conn->allocptr.userpwd;

  /* Referrer */
  Curl_safefree(conn->allocptr.ref);
  if(data->change.referer && !Curl_checkheaders(conn, "Referer:"))
    conn->allocptr.ref = aprintf("Referer: %s\r\n", data->change.referer);
  else
    conn->allocptr.ref = NULL;

  p_referrer = conn->allocptr.ref;

  /*
   * Range Header
   * Only applies to PLAY, PAUSE, RECORD
   *
   * Go ahead and use the Range stuff supplied for HTTP
   */
  if(data->state.use_range &&
     (rtspreq  & (RTSPREQ_PLAY | RTSPREQ_PAUSE | RTSPREQ_RECORD))) {

    /* Check to see if there is a range set in the custom headers */
    if(!Curl_checkheaders(conn, "Range:") && data->state.range) {
      Curl_safefree(conn->allocptr.rangeline);
      conn->allocptr.rangeline = aprintf("Range: %s\r\n", data->state.range);
      p_range = conn->allocptr.rangeline;
    }
  }

  /*
   * Sanity check the custom headers
   */
  if(Curl_checkheaders(conn, "CSeq:")) {
    failf(data, "CSeq cannot be set as a custom header.");
    return CURLE_RTSP_CSEQ_ERROR;
  }
  if(Curl_checkheaders(conn, "Session:")) {
    failf(data, "Session ID cannot be set as a custom header.");
    return CURLE_BAD_FUNCTION_ARGUMENT;
  }

  /* Initialize a dynamic send buffer */
  req_buffer = Curl_add_buffer_init();

  if(!req_buffer)
    return CURLE_OUT_OF_MEMORY;

  result =
    Curl_add_bufferf(req_buffer,
                     "%s %s RTSP/1.0\r\n" /* Request Stream-URI RTSP/1.0 */
                     "CSeq: %ld\r\n", /* CSeq */
                     p_request, p_stream_uri, rtsp->CSeq_sent);
  if(result)
    return result;

  /*
   * Rather than do a normal alloc line, keep the session_id unformatted
   * to make comparison easier
   */
  if(p_session_id) {
    result = Curl_add_bufferf(req_buffer, "Session: %s\r\n", p_session_id);
    if(result)
      return result;
  }

  /*
   * Shared HTTP-like options
   */
  result = Curl_add_bufferf(req_buffer,
                            "%s" /* transport */
                            "%s" /* accept */
                            "%s" /* accept-encoding */
                            "%s" /* range */
                            "%s" /* referrer */
                            "%s" /* user-agent */
                            "%s" /* proxyuserpwd */
                            "%s" /* userpwd */
                            ,
                            p_transport ? p_transport : "",
                            p_accept ? p_accept : "",
                            p_accept_encoding ? p_accept_encoding : "",
                            p_range ? p_range : "",
                            p_referrer ? p_referrer : "",
                            p_uagent ? p_uagent : "",
                            p_proxyuserpwd ? p_proxyuserpwd : "",
                            p_userpwd ? p_userpwd : "");

  /*
   * Free userpwd now --- cannot reuse this for Negotiate and possibly NTLM
   * with basic and digest, it will be freed anyway by the next request
   */
  Curl_safefree(conn->allocptr.userpwd);
  conn->allocptr.userpwd = NULL;

  if(result)
    return result;

  if((rtspreq == RTSPREQ_SETUP) || (rtspreq == RTSPREQ_DESCRIBE)) {
    result = Curl_add_timecondition(data, req_buffer);
    if(result)
      return result;
  }

  result = Curl_add_custom_headers(conn, FALSE, req_buffer);
  if(result)
    return result;

  if(rtspreq == RTSPREQ_ANNOUNCE ||
     rtspreq == RTSPREQ_SET_PARAMETER ||
     rtspreq == RTSPREQ_GET_PARAMETER) {

    if(data->set.upload) {
      putsize = data->state.infilesize;
      data->set.httpreq = HTTPREQ_PUT;

    }
    else {
      postsize = (data->state.infilesize != -1)?
        data->state.infilesize:
        (data->set.postfields? (curl_off_t)strlen(data->set.postfields):0);
      data->set.httpreq = HTTPREQ_POST;
    }

    if(putsize > 0 || postsize > 0) {
      /* As stated in the http comments, it is probably not wise to
       * actually set a custom Content-Length in the headers */
      if(!Curl_checkheaders(conn, "Content-Length:")) {
        result = Curl_add_bufferf(req_buffer,
            "Content-Length: %" CURL_FORMAT_CURL_OFF_T"\r\n",
            (data->set.upload ? putsize : postsize));
        if(result)
          return result;
      }

      if(rtspreq == RTSPREQ_SET_PARAMETER ||
         rtspreq == RTSPREQ_GET_PARAMETER) {
        if(!Curl_checkheaders(conn, "Content-Type:")) {
          result = Curl_add_bufferf(req_buffer,
              "Content-Type: text/parameters\r\n");
          if(result)
            return result;
        }
      }

      if(rtspreq == RTSPREQ_ANNOUNCE) {
        if(!Curl_checkheaders(conn, "Content-Type:")) {
          result = Curl_add_bufferf(req_buffer,
              "Content-Type: application/sdp\r\n");
          if(result)
            return result;
        }
      }

      data->state.expect100header = FALSE; /* RTSP posts are simple/small */
    }
    else if(rtspreq == RTSPREQ_GET_PARAMETER) {
      /* Check for an empty GET_PARAMETER (heartbeat) request */
      data->set.httpreq = HTTPREQ_HEAD;
      data->set.opt_no_body = TRUE;
    }
  }

  /* RTSP never allows chunked transfer */
  data->req.forbidchunk = TRUE;
  /* Finish the request buffer */
  result = Curl_add_buffer(req_buffer, "\r\n", 2);
  if(result)
    return result;

  if(postsize > 0) {
    result = Curl_add_buffer(req_buffer, data->set.postfields,
                             (size_t)postsize);
    if(result)
      return result;
  }

  /* issue the request */
  result = Curl_add_buffer_send(req_buffer, conn,
                                &data->info.request_size, 0, FIRSTSOCKET);
  if(result) {
    failf(data, "Failed sending RTSP request");
    return result;
  }

  Curl_setup_transfer(conn, FIRSTSOCKET, -1, TRUE, &http->readbytecount,
                      putsize?FIRSTSOCKET:-1,
                      putsize?&http->writebytecount:NULL);

  /* Increment the CSeq on success */
  data->state.rtsp_next_client_CSeq++;

  if(http->writebytecount) {
    /* if a request-body has been sent off, we make sure this progress is
       noted properly */
    Curl_pgrsSetUploadCounter(data, http->writebytecount);
    if(Curl_pgrsUpdate(conn))
      result = CURLE_ABORTED_BY_CALLBACK;
  }

  return result;
}