static void console_write(UINT8 data)
{
if (data & 0x08)
DAC_data_w(0, -120);
else
DAC_data_w(0, +120);
}
static WRITE8_HANDLER(cartridge_Orch90_io_w)
{
if( offset == 58 )
DAC_data_w(0, data);
if( offset == 59 )
DAC_data_w(0, data);
}
static void update_dac(void) {
/* printf("Clock: %x D: %x G:%x \n",activecpu_get_icount(),Dvalue, Gvalue); */
if (Gvalue == 0 && Dvalue == 0)
DAC_data_w(0, 0xff);
else if (Gvalue == 1 && Dvalue == 1)
DAC_data_w(0, 0x80);
else
DAC_data_w(0, 0x00);
}
static void sbrkout_tones_4V(int foo)
{
static int vlines=0;
if ((*sbrkout_sound) & vlines)
DAC_data_w(0,255);
else
DAC_data_w(0,0);
vlines = (vlines+1) % 16;
}
static void sbrkout_tones_4V(int foo)
{
static int vlines=0;
if ((*sbrkout_sound) & vlines)
DAC_data_w(0,255);
else
DAC_data_w(0,0);
vlines = (vlines+1) % 16;
timer_set (TIME_IN_MSEC(TIME_4V), 0, sbrkout_tones_4V);
}
static void medlanes_hardware_w(int offset, int data)
{
static int DAC_data = 0;
switch (offset)
{
case 0: /* speaker ? */
#if VERBOSE
if (errorlog)
fprintf(errorlog, "medlanes_hardware_w DAC $%02X\n", data);
#endif
DAC_data = data & 0xf0;
DAC_data_w(0, DAC_data);
break;
case 1: /* ???? it writes 0x05 here... */
#if VERBOSE
if (errorlog)
fprintf(errorlog, "medlanes_hardware_w hw1 $%02X\n", data);
#endif
break;
case 2: /* ???? it writes 0x3c / 0xcc here ... */
#if VERBOSE
if (errorlog)
fprintf(errorlog, "medlanes_hardware_w hw2 $%02X\n", data);
#endif
break;
case 3: /* ???? it writes 0x62 here... */
#if VERBOSE
if (errorlog)
fprintf(errorlog, "medlanes_hardware_w hw3 $%02X\n", data);
#endif
break;
}
}
static WRITE8_HANDLER( audio_dac_w)
{
UINT8 *rom = memory_region(REGION_CPU1);
int dac_address = ( data & 0xf0 ) << 8;
int sel = ( ( (~data) >> 1 ) & 2 ) | ( data & 1 );
if ( cur_dac_address != dac_address )
{
cur_dac_address_index = 0;
cur_dac_address = dac_address;
}
else
{
cur_dac_address_index++;
}
if ( sel & 1 )
dac_address += 0x10000;
if ( sel & 2 )
dac_address += 0x10000;
dac_address += 0x10000;
DAC_data_w( 0, rom[dac_address+cur_dac_address_index] );
timer_set( TIME_IN_HZ( 16000 ), 0, dac_irq );
}
static void vc20_wav_timer (int data)
{
/* NPW 28-Feb-2005 - this code sucks */
#if 0
if (wav.sample->resolution == 8)
{
tape.data = wav.sample->data[wav.pos] > 0x0;
wav.pos++;
if (wav.pos >= wav.sample->length)
{
wav.pos = 0;
tape.play = 0;
}
}
else
{
tape.data = ((short *) (wav.sample->data))[wav.pos] > 0x0;
wav.pos++;
if (wav.pos * 2 >= wav.sample->length)
{
wav.pos = 0;
tape.play = 0;
}
}
if (tape.noise)
DAC_data_w (0, tape.data ? TONE_ON_VALUE : 0);
if (tape.read_callback)
tape.read_callback (0, tape.data);
/* vc20_wav_state(); // removing timer in timer puls itself hangs */
#endif
}
static WRITE_HANDLER( kabukiz_sample_w )
{
// to avoid the write when the sound chip is initialized
if(data != 0xff)
{
DAC_data_w( 0, data );
}
}
ADDRESS_MAP_END
/* 2 DACs per CPU - 4 bits per sample */
static WRITE8_HANDLER( bssoccer_DAC_1_w )
{
DAC_data_w( 0 + (offset & 1), (data & 0xf) * 0x11 );
}
static WRITE8_HANDLER( ctc_timer_2_w )
{
if (data) /* rising edge */
{
output[1] ^= 0x7f;
channel_active[1] = 1;
DAC_data_w(1, output[0]);
}
}
static void vc20_prg_timer (int data)
{
if (!tape.data)
{ /* send the same low phase */
if (tape.noise)
DAC_data_w (0, 0);
tape.data = 1;
timer_reset (prg.timer, prg.lasttime);
}
else
{
if (tape.noise)
DAC_data_w (0, TONE_ON_VALUE);
tape.data = 0;
if (prg.statebit)
{
vc20_tape_bit (0);
}
else if (prg.statebyte)
{ /* send the rest of the byte */
vc20_tape_byte ();
}
else if (prg.stateheader)
{
vc20_tape_prgheader ();
}
else
{
vc20_tape_program ();
if (!prg.stateblock)
{
tape.play = 0;
}
}
}
if (tape.read_callback)
tape.read_callback (0, tape.data);
vc20_prg_state ();
}
static WRITE8_HANDLER(circusc_sound_w)
{
int c;
switch (offset & 7)
{
/* CS2 */
case 0:
sn_latch = data;
break;
/* CS3 */
case 1:
SN76496_0_w(0, sn_latch);
break;
/* CS4 */
case 2:
SN76496_1_w(0, sn_latch);
break;
/* CS5 */
case 3:
DAC_data_w(0, data);
break;
/* CS6 */
case 4:
c = (offset & 0x20) ? 470000 : 0;
filter_rc_set_RC(0, 1000, 2200, 1000, c);
c = 0;
if (offset & 0x10) c += 470000;
if (offset & 0x08) c += 47000;
filter_rc_set_RC(1, 1000, 2200, 1000, c);
c = (offset & 0x40) ? 470000 : 0;
filter_rc_set_RC(2, 1000, 10000, 1000, c);
}
}
static WRITE_HANDLER( grobda_DAC_w )
{
DAC_data_w(0, (data << 4) | data);
}
static void vc20_prg_write (int data)
{
#if 0
/* this was used to decode cbms tape format, but could */
/* be converted to a real program writer */
/* c16: be sure the cpu clock is about 1.8 MHz (when screen is off) */
static int count = 0;
static int old = 0;
static double time = 0;
static int bytecount = 0, byte;
if (old != data)
{
double neu = timer_get_time ();
int diff = (neu - time) * 1000000;
count++;
logerror("%f %d %s %d\n", (PCM_LONG + PCM_MIDDLE) / 2,
bytecount, old ? "high" : "low",
diff);
if (old)
{
if (count > 0 /*27000 */ )
{
switch (bytecount)
{
case 0:
if (diff > (PCM_LONG + PCM_MIDDLE) * 1e6 / 2)
{
bytecount++;
byte = 0;
}
break;
case 1:
case 3:
case 5:
case 7:
case 9:
case 11:
case 13:
case 15:
case 17:
bytecount++;
break;
case 2:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 1;
bytecount++;
break;
case 4:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 2;
bytecount++;
break;
case 6:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 4;
bytecount++;
break;
case 8:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 8;
bytecount++;
break;
case 10:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 0x10;
bytecount++;
break;
case 12:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 0x20;
bytecount++;
break;
case 14:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 0x40;
bytecount++;
break;
case 16:
if (diff > (PCM_MIDDLE + PCM_SHORT) * 1e6 / 2)
byte |= 0x80;
logerror("byte %.2x\n", byte);
bytecount = 0;
break;
}
}
}
old = data;
time = timer_get_time ();
}
#endif
if (tape.noise)
DAC_data_w (0, data ? TONE_ON_VALUE : 0);
}
void spacefb_sh_putp1(int offset, int data)
{
DAC_data_w(0,data);
}
void circusc_dac_w(int offset,int data)
{
DAC_data_w(0,data);
}
static void vc20_prg_state (void)
{
switch (prg.state)
{
case 0:
break; /* not inited */
case 1: /* off */
if (tape.on)
{
prg.state = 2;
break;
}
break;
case 2: /* on */
if (!tape.on)
{
prg.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
break;
}
if (tape.motor && tape.play)
{
prg.state = 3;
timer_reset(prg.timer, 0.0);
break;
}
if (tape.motor && tape.record)
{
prg.state = 4;
break;
}
break;
case 3: /* reading */
if (!tape.on)
{
prg.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
timer_reset(prg.timer, TIME_NEVER);
break;
}
if (!tape.motor || !tape.play)
{
prg.state = 2;
timer_reset(prg.timer, TIME_NEVER);
DAC_data_w (0, 0);
break;
}
break;
case 4: /* saving */
if (!tape.on)
{
prg.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
break;
}
if (!tape.motor || !tape.record)
{
prg.state = 2;
DAC_data_w (0, 0);
break;
}
break;
}
}
static void vc20_wav_write (int data)
{
if (tape.noise)
DAC_data_w (0, data);
}
static void vc20_wav_state (void)
{
/* NPW 28-Feb-2005 - this code sucks */
#if 0
switch (wav.state)
{
case 0:
break; /* not inited */
case 1: /* off */
if (tape.on)
{
wav.state = 2;
break;
}
break;
case 2: /* on */
if (!tape.on)
{
wav.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
break;
}
if (tape.motor && tape.play)
{
wav.state = 3;
timer_adjust(wav.timer, 0, 0, 1.0 / wav.sample->smpfreq);
break;
}
if (tape.motor && tape.record)
{
wav.state = 4;
break;
}
break;
case 3: /* reading */
if (!tape.on)
{
wav.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
timer_reset(wav.timer, TIME_NEVER);
break;
}
if (!tape.motor || !tape.play)
{
wav.state = 2;
timer_reset(wav.timer, TIME_NEVER);
DAC_data_w (0, 0);
break;
}
break;
case 4: /* saving */
if (!tape.on)
{
wav.state = 1;
tape.play = 0;
tape.record = 0;
DAC_data_w (0, 0);
break;
}
if (!tape.motor || !tape.record)
{
wav.state = 2;
DAC_data_w (0, 0);
break;
}
break;
}
#endif
}
static WRITE_HANDLER( bssoccer_DAC_1_w )
{
DAC_data_w( 0 + (offset & 1), (data & 0xf) * 0x11 );
}
static WRITE8_HANDLER( bssoccer_DAC_2_w )
{
DAC_data_w( 2 + (offset & 1), (data & 0xf) * 0x11 );
}
static WRITE_HANDLER(c_port_w)
{
DAC_data_w(0, data);
//logerror("%04x: C Port Write=%02x\n",activecpu_get_previouspc(),data);
}
static WRITE_HANDLER( mario_sh_sound_w )
{
DAC_data_w(0,data);
}
static void grobda_DAC_w(int offset, int data)
{
DAC_data_w(0, (data << 4) | data);
}
