DEVICE_INPUT_DEFAULTS_END
//-------------------------------------------------
// device_add_mconfig - add device-specific
// machine configuration
//-------------------------------------------------
void ss50_mpc_device::device_add_mconfig(machine_config &config)
{
PIA6821(config, m_pia, 0); // actually MC6820
m_pia->writepa_handler().set("outgate", FUNC(input_merger_device::in_w<0>)).bit(0);
m_pia->cb2_handler().set(FUNC(ss50_mpc_device::reader_control_w));
m_pia->readpb_handler().set_ioport("STOP").mask(0x01).lshift(6);
m_pia->readpb_handler().append(FUNC(ss50_mpc_device::count_r)).lshift(7);
m_pia->writepb_handler().set(FUNC(ss50_mpc_device::count_select_w)).bit(2);
m_pia->writepb_handler().append(m_counter, FUNC(ripple_counter_device::reset_w)).bit(0);
//m_pia->irqa_handler().set(FUNC(ss50_mpc_device::pia_irq_w));
//m_pia->irqb_handler().set(FUNC(ss50_mpc_device::pia_irq_w));
rs232_port_device &rs232(RS232_PORT(config, "rs232", default_rs232_devices, "terminal"));
rs232.rxd_handler().set(FUNC(ss50_mpc_device::serial_input_w));
rs232.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
INPUT_MERGER_ALL_HIGH(config, "outgate").output_handler().set("rs232", FUNC(rs232_port_device::write_txd));
INPUT_MERGER_ANY_HIGH(config, m_loopback).output_handler().set("outgate", FUNC(input_merger_device::in_w<1>));
RIPPLE_COUNTER(config, m_counter); // CD4024AE (IC3)
m_counter->set_stages(7); // only Q5 (÷32) and Q4 (÷16) are actually used
}
DEVICE_INPUT_DEFAULTS_END
void cardinal_state::cardinal(machine_config &config)
{
i8031_device &maincpu(I8031(config, "maincpu", 7.3728_MHz_XTAL));
maincpu.set_addrmap(AS_PROGRAM, &cardinal_state::prog_map);
maincpu.set_addrmap(AS_IO, &cardinal_state::ext_map);
maincpu.port_in_cb<1>().set(FUNC(cardinal_state::p1_r));
maincpu.port_out_cb<1>().set(FUNC(cardinal_state::p1_w));
maincpu.port_in_cb<3>().set_ioport("P3");
EEPROM_93C06_16BIT(config, m_eeprom);
CRT9028_000(config, m_vtlc, 10.92_MHz_XTAL);
m_vtlc->set_screen("screen");
m_vtlc->set_addrmap(0, &cardinal_state::ram_map);
m_vtlc->vsync_callback().set_inputline("maincpu", MCS51_INT0_LINE).invert();
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
SPEAKER(config, "mono").front_center();
SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.05);
RS232_PORT(config, m_rs232, default_rs232_devices, nullptr);
rs232_port_device &kb(RS232_PORT(config, "kb", default_rs232_devices, "keyboard"));
kb.set_option_device_input_defaults("keyboard", DEVICE_INPUT_DEFAULTS_NAME(keyboard));
kb.rxd_handler().set_inputline("maincpu", MCS51_INT1_LINE).invert();
}
void konamigq_state::konamigq(machine_config &config)
{
/* basic machine hardware */
CXD8530BQ(config, m_maincpu, XTAL(67'737'600));
m_maincpu->set_addrmap(AS_PROGRAM, &konamigq_state::konamigq_map);
m_maincpu->subdevice<psxdma_device>("dma")->install_read_handler(5, psxdma_device::read_delegate(&konamigq_state::scsi_dma_read, this));
m_maincpu->subdevice<psxdma_device>("dma")->install_write_handler(5, psxdma_device::write_delegate(&konamigq_state::scsi_dma_write, this));
m_maincpu->subdevice<ram_device>("ram")->set_default_size("4M");
M68000(config, m_soundcpu, XTAL(32'000'000)/4); /* 8MHz - measured */
m_soundcpu->set_addrmap(AS_PROGRAM, &konamigq_state::konamigq_sound_map);
TMS57002(config, m_dasp, XTAL(48'000'000)/2); /* 24MHz - measured */
m_dasp->set_addrmap(AS_DATA, &konamigq_state::konamigq_dasp_map);
m_dasp->set_periodic_int(FUNC(konamigq_state::tms_sync), attotime::from_hz(48000));
MB89371(config, "mb89371", 0);
EEPROM_93C46_16BIT(config, "eeprom").default_data(konamigq_def_eeprom, 128);
scsi_port_device &scsi(SCSI_PORT(config, "scsi", 0));
scsi.set_slot_device(1, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_0));
AM53CF96(config, m_am53cf96, 0);
m_am53cf96->set_scsi_port("scsi");
m_am53cf96->irq_handler().set("maincpu:irq", FUNC(psxirq_device::intin10));
/* video hardware */
CXD8538Q(config, "gpu", XTAL(53'693'175), 0x200000, subdevice<psxcpu_device>("maincpu")).set_screen("screen");
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
/* sound hardware */
SPEAKER(config, "lspeaker").front_left();
SPEAKER(config, "rspeaker").front_right();
K056800(config, m_k056800, XTAL(18'432'000));
m_k056800->int_callback().set_inputline(m_soundcpu, M68K_IRQ_1);
k054539_device &k054539_1(K054539(config, "k054539_1", XTAL(18'432'000)));
k054539_1.set_addrmap(0, &konamigq_state::konamigq_k054539_map);
k054539_1.timer_handler().set(FUNC(konamigq_state::k054539_irq_gen));
k054539_1.add_route(0, "lspeaker", 1.0);
k054539_1.add_route(1, "rspeaker", 1.0);
k054539_device &k054539_2(K054539(config, "k054539_2", XTAL(18'432'000)));
k054539_2.set_addrmap(0, &konamigq_state::konamigq_k054539_map);
k054539_2.add_route(0, "lspeaker", 1.0);
k054539_2.add_route(1, "rspeaker", 1.0);
}
DEVICE_INPUT_DEFAULTS_END
void microkit_state::microkit(machine_config &config)
{
// basic machine hardware
CDP1802(config, m_maincpu, 1750000);
m_maincpu->set_addrmap(AS_PROGRAM, µkit_state::microkit_mem);
m_maincpu->set_addrmap(AS_IO, µkit_state::microkit_io);
m_maincpu->wait_cb().set_constant(1);
m_maincpu->clear_cb().set(FUNC(microkit_state::clear_r));
/* video hardware */
RS232_PORT(config, m_rs232, default_rs232_devices, "keyboard");
m_rs232->rxd_handler().set_inputline(m_maincpu, COSMAC_INPUT_LINE_EF4);
m_rs232->set_option_device_input_defaults("keyboard", DEVICE_INPUT_DEFAULTS_NAME(serial_keyb));
GENERIC_TERMINAL(config, m_terminal, 0);
}
DEVICE_INPUT_DEFAULTS_END
//-------------------------------------------------
// device_add_mconfig - add device-specific
// machine configuration
//-------------------------------------------------
void ss50_mps_device::device_add_mconfig(machine_config &config)
{
ACIA6850(config, m_acia, 0);
m_acia->txd_handler().set("rs232", FUNC(rs232_port_device::write_txd));
//m_acia->rts_handler().set(FUNC(ss50_mps_device::reader_control_w));
m_acia->irq_handler().set(FUNC(ss50_mps_device::acia_irq_w));
rs232_port_device &rs232(RS232_PORT(config, "rs232", default_rs232_devices, "terminal"));
rs232.rxd_handler().set(m_acia, FUNC(acia6850_device::write_rxd));
rs232.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
}
void pulsar_state::pulsar(machine_config &config)
{
/* basic machine hardware */
Z80(config, m_maincpu, 4_MHz_XTAL);
m_maincpu->set_addrmap(AS_PROGRAM, &pulsar_state::mem_map);
m_maincpu->set_addrmap(AS_IO, &pulsar_state::io_map);
m_maincpu->set_daisy_config(daisy_chain_intf);
/* Devices */
i8255_device &ppi(I8255(config, "ppi"));
ppi.out_pa_callback().set(FUNC(pulsar_state::ppi_pa_w));
ppi.out_pb_callback().set(FUNC(pulsar_state::ppi_pb_w));
ppi.in_pc_callback().set(FUNC(pulsar_state::ppi_pc_r));
ppi.out_pc_callback().set(FUNC(pulsar_state::ppi_pc_w));
MSM5832(config, "rtc", 32.768_kHz_XTAL);
z80dart_device& dart(Z80DART(config, "dart", 4_MHz_XTAL));
dart.out_txda_callback().set("rs232", FUNC(rs232_port_device::write_txd));
dart.out_dtra_callback().set("rs232", FUNC(rs232_port_device::write_dtr));
dart.out_rtsa_callback().set("rs232", FUNC(rs232_port_device::write_rts));
dart.out_int_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
rs232_port_device &rs232(RS232_PORT(config, "rs232", default_rs232_devices, "terminal"));
rs232.rxd_handler().set("dart", FUNC(z80dart_device::rxa_w));
rs232.cts_handler().set("dart", FUNC(z80dart_device::ctsa_w));
rs232.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
com8116_device &brg(COM8116(config, "brg", 5.0688_MHz_XTAL));
// Schematic has the labels for FT and FR the wrong way around, but the pin numbers are correct.
brg.fr_handler().set("dart", FUNC(z80dart_device::txca_w));
brg.fr_handler().append("dart", FUNC(z80dart_device::rxca_w));
brg.ft_handler().set("dart", FUNC(z80dart_device::txcb_w));
brg.ft_handler().append("dart", FUNC(z80dart_device::rxcb_w));
FD1797(config, m_fdc, 4_MHz_XTAL / 2);
FLOPPY_CONNECTOR(config, "fdc:0", pulsar_floppies, "flop", floppy_image_device::default_floppy_formats).enable_sound(true);
FLOPPY_CONNECTOR(config, "fdc:1", pulsar_floppies, "flop", floppy_image_device::default_floppy_formats).enable_sound(true);
}
MCFG_I8275_DRQ_CALLBACK(WRITELINE(*this, tim100_state, drq_w))
MCFG_I8275_IRQ_CALLBACK(WRITELINE(*this, tim100_state, irq_w))
MCFG_VIDEO_SET_SCREEN("screen")
MCFG_PALETTE_ADD("palette", 3)
i8251_device &uart_u17(I8251(config, "uart_u17", 0));
uart_u17.txd_handler().set("rs232", FUNC(rs232_port_device::write_txd));
uart_u17.dtr_handler().set("rs232", FUNC(rs232_port_device::write_dtr));
uart_u17.rts_handler().set("rs232", FUNC(rs232_port_device::write_rts));
rs232_port_device &rs232(RS232_PORT(config, "rs232", default_rs232_devices, "keyboard"));
rs232.rxd_handler().set("uart_u17", FUNC(i8251_device::write_rxd));
rs232.dsr_handler().set("uart_u17", FUNC(i8251_device::write_dsr));
rs232.cts_handler().set("uart_u17", FUNC(i8251_device::write_cts));
rs232.set_option_device_input_defaults("keyboard", DEVICE_INPUT_DEFAULTS_NAME(tim100));
i8251_device &uart_u18(I8251(config, "uart_u18", 0));
uart_u18.txd_handler().set("rs232a", FUNC(rs232_port_device::write_txd));
uart_u18.dtr_handler().set("rs232a", FUNC(rs232_port_device::write_dtr));
uart_u18.rts_handler().set("rs232a", FUNC(rs232_port_device::write_rts));
rs232_port_device &rs232a(RS232_PORT(config, "rs232a", default_rs232_devices, "terminal")); //"keyboard"));
rs232a.rxd_handler().set("uart_u18", FUNC(i8251_device::write_rxd));
rs232a.dsr_handler().set("uart_u18", FUNC(i8251_device::write_dsr));
rs232a.cts_handler().set("uart_u18", FUNC(i8251_device::write_cts));
rs232a.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(tim100));
clock_device &uart_clock(CLOCK(config, "uart_clock", 153'600));
uart_clock.signal_handler().set("uart_u17", FUNC(i8251_device::write_txc));
uart_clock.signal_handler().append("uart_u17", FUNC(i8251_device::write_rxc));
void bebox_state::bebox_peripherals(machine_config &config)
{
config.m_minimum_quantum = attotime::from_hz(60);
PIT8254(config, m_pit8254, 0);
m_pit8254->set_clk<0>(4772720/4); /* heartbeat IRQ */
m_pit8254->set_clk<1>(4772720/4); /* dram refresh */
m_pit8254->set_clk<2>(4772720/4); /* pio port c pin 4, and speaker polling */
m_pit8254->out_handler<0>().set(FUNC(bebox_state::bebox_timer0_w));
m_pit8254->out_handler<2>().set("kbdc", FUNC(kbdc8042_device::write_out2));
AM9517A(config, m_dma8237[0], XTAL(14'318'181)/3);
m_dma8237[0]->out_hreq_callback().set(FUNC(bebox_state::bebox_dma_hrq_changed));
m_dma8237[0]->out_eop_callback().set(FUNC(bebox_state::bebox_dma8237_out_eop));
m_dma8237[0]->in_memr_callback().set(FUNC(bebox_state::bebox_dma_read_byte));
m_dma8237[0]->out_memw_callback().set(FUNC(bebox_state::bebox_dma_write_byte));
m_dma8237[0]->in_ior_callback<2>().set(FUNC(bebox_state::bebox_dma8237_fdc_dack_r));
m_dma8237[0]->out_iow_callback<2>().set(FUNC(bebox_state::bebox_dma8237_fdc_dack_w));
m_dma8237[0]->out_dack_callback<0>().set(FUNC(bebox_state::pc_dack0_w));
m_dma8237[0]->out_dack_callback<1>().set(FUNC(bebox_state::pc_dack1_w));
m_dma8237[0]->out_dack_callback<2>().set(FUNC(bebox_state::pc_dack2_w));
m_dma8237[0]->out_dack_callback<3>().set(FUNC(bebox_state::pc_dack3_w));
AM9517A(config, m_dma8237[1], XTAL(14'318'181)/3);
PIC8259(config, m_pic8259[0], 0);
m_pic8259[0]->out_int_callback().set(FUNC(bebox_state::bebox_pic8259_master_set_int_line));
m_pic8259[0]->in_sp_callback().set_constant(1);
m_pic8259[0]->read_slave_ack_callback().set(FUNC(bebox_state::get_slave_ack));
PIC8259(config, m_pic8259[1], 0);
m_pic8259[1]->out_int_callback().set(FUNC(bebox_state::bebox_pic8259_slave_set_int_line));
m_pic8259[1]->in_sp_callback().set_constant(0);
NS16550(config, "ns16550_0", 0); /* TODO: Verify model */
NS16550(config, "ns16550_1", 0); /* TODO: Verify model */
NS16550(config, "ns16550_2", 0); /* TODO: Verify model */
NS16550(config, "ns16550_3", 0); /* TODO: Verify model */
/* video hardware */
screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
screen.set_raw(XTAL(25'174'800), 900, 0, 640, 526, 0, 480);
screen.set_screen_update("vga", FUNC(cirrus_gd5428_device::screen_update));
cirrus_gd5428_device &vga(CIRRUS_GD5428(config, "vga", 0));
vga.set_screen("screen");
speaker_device &speaker(SPEAKER(config, "mono"));
speaker.front_center();
ym3812_device &ym3812(YM3812(config, "ym3812", 3579545));
ym3812.add_route(ALL_OUTPUTS, speaker, 1.0);
FUJITSU_29F016A(config, "flash");
scsi_port_device &scsibus(SCSI_PORT(config, "scsi"));
scsibus.set_slot_device(1, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_0));
scsibus.set_slot_device(2, "cdrom", SCSICD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_3));
lsi53c810_device &scsictrl(LSI53C810(config, "lsi53c810"));
scsictrl.set_irq_callback(FUNC(bebox_state::scsi_irq_callback));
scsictrl.set_dma_callback(FUNC(bebox_state::scsi_dma_callback));
scsictrl.set_fetch_callback(FUNC(bebox_state::scsi_fetch));
scsictrl.set_scsi_port("scsi");
ide_controller_device &idectrl(IDE_CONTROLLER(config, "ide"));
idectrl.set_default_ata_devices("hdd", nullptr);
idectrl.irq_handler().set(FUNC(bebox_state::bebox_ide_interrupt));
/* pci */
PCI_BUS(config, m_pcibus, 0);
m_pcibus->set_busnum(0);
pci_connector_device &pcislot0 = add_pci_slot(config, "pcibus:0", 0, "mpc105");
pcislot0.set_option_machine_config("mpc105", mpc105_config);
add_pci_slot(config, "pcibus:1", 1, "cirrus");
/*MCFG_PCI_BUS_DEVICE(12, nullptr, scsi53c810_pci_read, scsi53c810_pci_write)*/
SMC37C78(config, m_smc37c78, 24'000'000);
m_smc37c78->intrq_wr_callback().set(FUNC(bebox_state::fdc_interrupt));
m_smc37c78->drq_wr_callback().set(m_dma8237[0], FUNC(am9517a_device::dreq2_w));
floppy_connector &fdc(FLOPPY_CONNECTOR(config, "smc37c78:0"));
fdc.option_add("35hd", FLOPPY_35_HD);
fdc.set_default_option("35hd");
fdc.set_formats(bebox_state::floppy_formats);
MC146818(config, "rtc", 32.768_kHz_XTAL);
kbdc8042_device &kbdc(KBDC8042(config, "kbdc"));
kbdc.set_keyboard_type(kbdc8042_device::KBDC8042_STANDARD);
kbdc.system_reset_callback().set_inputline(m_ppc[0], INPUT_LINE_RESET);
kbdc.input_buffer_full_callback().set(FUNC(bebox_state::bebox_keyboard_interrupt));
/* internal ram */
RAM(config, m_ram);
m_ram->set_default_size("32M");
m_ram->set_extra_options("8M,16M");
}
void econet_e01_device::device_add_mconfig(machine_config &config)
{
// basic machine hardware
M65C02(config, m_maincpu, XTAL(8'000'000)/4); // Rockwell R65C102P3
m_maincpu->set_addrmap(AS_PROGRAM, &econet_e01_device::e01_mem);
MC146818(config, m_rtc, 32.768_kHz_XTAL);
m_rtc->irq().set(FUNC(econet_e01_device::rtc_irq_w));
// devices
via6522_device &via(VIA6522(config, R6522_TAG, 8_MHz_XTAL / 4));
via.writepa_handler().set("cent_data_out", FUNC(output_latch_device::bus_w));
via.irq_handler().set(FUNC(econet_e01_device::via_irq_w));
MC6854(config, m_adlc, 0);
m_adlc->out_irq_cb().set(FUNC(econet_e01_device::adlc_irq_w));
m_adlc->out_txd_cb().set(FUNC(econet_e01_device::econet_data_w));
WD2793(config, m_fdc, 8_MHz_XTAL / 4);
m_fdc->intrq_wr_callback().set(FUNC(econet_e01_device::fdc_irq_w));
m_fdc->drq_wr_callback().set(FUNC(econet_e01_device::fdc_drq_w));
for (int i = 0; i < 2; i++)
{
FLOPPY_CONNECTOR(config, m_floppy[i]);
m_floppy[i]->option_add("35dd", FLOPPY_35_DD);
m_floppy[i]->set_default_option("35dd");
m_floppy[i]->set_formats(floppy_formats_afs);
}
software_list_device &softlist(SOFTWARE_LIST(config, "flop_ls_e01"));
softlist.set_type("e01_flop", SOFTWARE_LIST_ORIGINAL_SYSTEM);
CENTRONICS(config, m_centronics, centronics_devices, "printer");
m_centronics->ack_handler().set(R6522_TAG, FUNC(via6522_device::write_ca1));
output_latch_device ¢_data_out(OUTPUT_LATCH(config, "cent_data_out"));
m_centronics->set_output_latch(cent_data_out);
SCSI_PORT(config, m_scsibus);
m_scsibus->set_data_input_buffer(m_scsi_data_in);
m_scsibus->msg_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit0));
m_scsibus->bsy_handler().set(FUNC(econet_e01_device::scsi_bsy_w)); // bit1
// bit 2 0
// bit 3 0
// bit 4 NIRQ
m_scsibus->req_handler().set(FUNC(econet_e01_device::scsi_req_w)); // bit5
m_scsibus->io_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit6));
m_scsibus->cd_handler().set(m_scsi_ctrl_in, FUNC(input_buffer_device::write_bit7));
m_scsibus->set_slot_device(1, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_0));
OUTPUT_LATCH(config, m_scsi_data_out);
m_scsibus->set_output_latch(*m_scsi_data_out);
INPUT_BUFFER(config, m_scsi_data_in);
INPUT_BUFFER(config, m_scsi_ctrl_in);
// internal ram
RAM(config, m_ram);
m_ram->set_default_size("64K");
}
void bitgraph_state::bg_motherboard(machine_config &config)
{
SCREEN(config, m_screen, SCREEN_TYPE_RASTER);
m_screen->set_refresh_hz(40);
m_screen->set_vblank_time(ATTOSECONDS_IN_USEC(2500)); /* not accurate */
m_screen->set_size(1024, 768);
m_screen->set_visarea_full();
m_screen->set_screen_update(FUNC(bitgraph_state::screen_update));
m_screen->set_palette("palette");
PALETTE(config, "palette", palette_device::MONOCHROME);
ACIA6850(config, m_acia0, 0);
m_acia0->txd_handler().set(RS232_H_TAG, FUNC(rs232_port_device::write_txd));
m_acia0->rts_handler().set(RS232_H_TAG, FUNC(rs232_port_device::write_rts));
m_acia0->irq_handler().set_inputline(m_maincpu, M68K_IRQ_1);
rs232_port_device &rs232h(RS232_PORT(config, RS232_H_TAG, default_rs232_devices, "null_modem"));
rs232h.rxd_handler().set(m_acia0, FUNC(acia6850_device::write_rxd));
rs232h.dcd_handler().set(m_acia0, FUNC(acia6850_device::write_dcd));
rs232h.cts_handler().set(m_acia0, FUNC(acia6850_device::write_cts));
ACIA6850(config, m_acia1, 0);
m_acia1->txd_handler().set(RS232_K_TAG, FUNC(rs232_port_device::write_txd));
m_acia1->rts_handler().set(RS232_K_TAG, FUNC(rs232_port_device::write_rts));
m_acia1->irq_handler().set_inputline(m_maincpu, M68K_IRQ_1);
rs232_port_device &rs232k(RS232_PORT(config, RS232_K_TAG, default_rs232_devices, "keyboard"));
rs232k.rxd_handler().set(m_acia1, FUNC(acia6850_device::write_rxd));
rs232k.dcd_handler().set(m_acia1, FUNC(acia6850_device::write_dcd));
rs232k.cts_handler().set(m_acia1, FUNC(acia6850_device::write_cts));
rs232k.set_option_device_input_defaults("keyboard", DEVICE_INPUT_DEFAULTS_NAME(kbd_rs232_defaults));
ACIA6850(config, m_acia2, 0);
m_acia2->txd_handler().set(RS232_D_TAG, FUNC(rs232_port_device::write_txd));
m_acia2->rts_handler().set(RS232_D_TAG, FUNC(rs232_port_device::write_rts));
m_acia2->irq_handler().set_inputline(m_maincpu, M68K_IRQ_1);
rs232_port_device &rs232d(RS232_PORT(config, RS232_D_TAG, default_rs232_devices, nullptr));
rs232d.rxd_handler().set(m_acia2, FUNC(acia6850_device::write_rxd));
rs232d.dcd_handler().set(m_acia2, FUNC(acia6850_device::write_dcd));
rs232d.cts_handler().set(m_acia2, FUNC(acia6850_device::write_cts));
// XXX actual part may be something else
COM8116(config, m_dbrga, 5.0688_MHz_XTAL);
m_dbrga->fr_handler().set(FUNC(bitgraph_state::com8116_a_fr_w));
m_dbrga->ft_handler().set(FUNC(bitgraph_state::com8116_a_ft_w));
COM8116(config, m_dbrgb, 5.0688_MHz_XTAL);
m_dbrgb->fr_handler().set(FUNC(bitgraph_state::com8116_b_fr_w));
m_dbrgb->ft_handler().set(FUNC(bitgraph_state::com8116_b_ft_w));
PIA6821(config, m_pia, 0);
m_pia->readca1_handler().set(FUNC(bitgraph_state::pia_ca1_r));
m_pia->cb2_handler().set(FUNC(bitgraph_state::pia_cb2_w));
m_pia->readpa_handler().set(FUNC(bitgraph_state::pia_pa_r));
m_pia->writepa_handler().set(FUNC(bitgraph_state::pia_pa_w));
m_pia->readpb_handler().set(FUNC(bitgraph_state::pia_pb_r));
m_pia->writepb_handler().set(FUNC(bitgraph_state::pia_pb_w));
ER2055(config, m_earom, 0);
SPEAKER(config, "mono").front_center();
AY8912(config, m_psg, XTAL(1'294'400));
m_psg->port_a_write_callback().set(FUNC(bitgraph_state::earom_write));
m_psg->add_route(ALL_OUTPUTS, "mono", 1.00);
}
i8253_1.out_handler<1>().set(FUNC(sage2_state::br1_w));
i8253_1.set_clk<2>(XTAL(16'000'000)/2/13);
i8253_1.out_handler<2>().set(FUNC(sage2_state::br2_w));
I8251(config, m_usart0, 0);
m_usart0->txd_handler().set(RS232_A_TAG, FUNC(rs232_port_device::write_txd));
m_usart0->dtr_handler().set(RS232_A_TAG, FUNC(rs232_port_device::write_dtr));
m_usart0->rts_handler().set(RS232_A_TAG, FUNC(rs232_port_device::write_rts));
m_usart0->rxrdy_handler().set_inputline(M68000_TAG, M68K_IRQ_5);
m_usart0->txrdy_handler().set(m_pic, FUNC(pic8259_device::ir2_w));
rs232_port_device &rs232a(RS232_PORT(config, RS232_A_TAG, default_rs232_devices, "terminal"));
rs232a.rxd_handler().set(m_usart0, FUNC(i8251_device::write_rxd));
rs232a.dsr_handler().set(m_usart0, FUNC(i8251_device::write_dsr));
rs232a.cts_handler().set(m_usart0, FUNC(i8251_device::write_cts));
rs232a.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
I8251(config, m_usart1, 0);
m_usart1->txd_handler().set(RS232_B_TAG, FUNC(rs232_port_device::write_txd));
m_usart1->dtr_handler().set(RS232_B_TAG, FUNC(rs232_port_device::write_dtr));
m_usart1->rts_handler().set(RS232_B_TAG, FUNC(rs232_port_device::write_rts));
m_usart1->rxrdy_handler().set(m_pic, FUNC(pic8259_device::ir1_w));
m_usart1->txrdy_handler().set(m_pic, FUNC(pic8259_device::ir3_w));
rs232_port_device &rs232b(RS232_PORT(config, RS232_B_TAG, default_rs232_devices, nullptr));
rs232b.rxd_handler().set(m_usart1, FUNC(i8251_device::write_rxd));
rs232b.dsr_handler().set(m_usart1, FUNC(i8251_device::write_dsr));
UPD765A(config, m_fdc, 8'000'000, false, false);
m_fdc->intrq_wr_callback().set(FUNC(sage2_state::fdc_irq));
DEVICE_INPUT_DEFAULTS_END
void isbc8010_state::isbc8010(machine_config &config)
{
/* basic machine hardware */
I8080A(config, m_maincpu, XTAL(18'432'000)/9);
m_maincpu->set_addrmap(AS_PROGRAM, &isbc8010_state::isbc8010_mem);
m_maincpu->set_addrmap(AS_IO, &isbc8010_state::isbc8010_io);
I8251(config, m_usart, 0);
m_usart->txd_handler().set(RS232_TAG, FUNC(rs232_port_device::write_txd));
m_usart->dtr_handler().set(RS232_TAG, FUNC(rs232_port_device::write_dtr));
m_usart->rts_handler().set(RS232_TAG, FUNC(rs232_port_device::write_rts));
I8255A(config, m_ppi_0);
I8255A(config, m_ppi_1);
RS232_PORT(config, m_rs232, default_rs232_devices, "terminal");
m_rs232->rxd_handler().set(m_usart, FUNC(i8251_device::write_rxd));
m_rs232->dsr_handler().set(m_usart, FUNC(i8251_device::write_dsr));
m_rs232->cts_handler().set(m_usart, FUNC(i8251_device::write_cts));
m_rs232->set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
clock_device &usart_clock(CLOCK(config, "usart_clock", XTAL(18'432'000)/60));
usart_clock.signal_handler().set(FUNC(isbc8010_state::usart_clock_tick));
/* video hardware */
// 96364 crt controller
// screen_device &screen(SCREEN(config, "screen", SCREEN_TYPE_RASTER));
// screen.set_refresh_hz(60);
/* Video is blanked for 70 out of 262 scanlines per refresh cycle.
Each scanline is composed of 65 character times, 40 of which
are visible, and each character time is 7 dot times; a dot time
is 2 cycles of the fundamental 14.31818 MHz oscillator. The
total blanking time is about 4450 microseconds. */
// screen.set_vblank_time(ATTOSECONDS_IN_USEC((int) (70 * 65 * 7 * 2 / 14.31818)));
/* It would be nice if we could implement some sort of display
overscan here. */
// screen.set_size(40 * 7, 24 * 8);
// screen.set_visarea(0, 40 * 7 - 1, 0, 24 * 8 - 1);
// screen.set_screen_update(FUNC(sdk80_state::screen_update));
// screen.set_palette("palette");
// GFXDECODE(config, "gfxdecode", "palette", gfx_sdk80);
// PALETTE(config, "palette", palette_device::MONOCHROME);
// Video board UART
// ay31015_device &hd6402(AY31015(config, "hd6402", 0));
// MCFG_AY31015_TX_CLOCK(( XTAL(16'000'000) / 16 ) / 256)
// MCFG_AY31015_RX_CLOCK(( XTAL(16'000'000) / 16 ) / 256)
// hd6402.read_si_callback().set(FUNC(sdk80_state::nascom1_hd6402_si));
// hd6402.write_so_callback().set(FUNC(sdk80_state::nascom1_hd6402_so));
// clock_device &uart_clock(CLOCK(config, "uart_clock", (XTAL(16'000'000) / 16) / 256));
// uart_clock.signal_handler().set("hd6402", FUNC(ay31015_device::write_tcp));
// uart_clock.signal_handler().append("hd6402", FUNC(ay31015_device::write_rcp));
/* Devices */
// i8279_device &kbdc(I8279(config, "i8279", 3100000)); // based on divider
// kbdc.out_irq_callback().set_inputline("maincpu", I8085_RST55_LINE); // irq
// kbdc.out_sl_callback().set(FUNC(sdk80_state::scanlines_w)); // scan SL lines
// kbdc.out_disp_callback().set(FUNC(sdk80_state::digit_w)); // display A&B
// kbdc.in_rl_callback().set(FUNC(sdk80_state::kbd_r)); // kbd RL lines
// kbdc.in_shift_callback().set_constant(1); // Shift key
// kbdc.in_ctrl_callback().set_constant(1);
}
void exp85_state::exp85(machine_config &config)
{
/* basic machine hardware */
I8085A(config, m_maincpu, 6.144_MHz_XTAL);
m_maincpu->set_addrmap(AS_PROGRAM, &exp85_state::exp85_mem);
m_maincpu->set_addrmap(AS_IO, &exp85_state::exp85_io);
m_maincpu->in_sid_func().set(FUNC(exp85_state::sid_r));
m_maincpu->out_sod_func().set(FUNC(exp85_state::sod_w));
/* sound hardware */
SPEAKER(config, "mono").front_center();
SPEAKER_SOUND(config, m_speaker).add_route(ALL_OUTPUTS, "mono", 0.25);
/* devices */
I8155(config, I8155_TAG, 6.144_MHz_XTAL/2);
i8355_device &i8355(I8355(config, I8355_TAG, 6.144_MHz_XTAL/2));
i8355.in_pa().set(FUNC(exp85_state::i8355_a_r));
i8355.out_pa().set(FUNC(exp85_state::i8355_a_w));
CASSETTE(config, m_cassette);
m_cassette->set_default_state((cassette_state)(CASSETTE_STOPPED | CASSETTE_MOTOR_ENABLED | CASSETTE_SPEAKER_MUTED));
RS232_PORT(config, "rs232", default_rs232_devices, "terminal").set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
/* internal ram */
RAM(config, RAM_TAG).set_default_size("256").set_extra_options("4K");
}
void genpc_state::pcega(machine_config &config)
{
pccga(config);
subdevice<isa8_slot_device>("isa1")->set_default_option("ega");
subdevice<ibm5160_mb_device>("mb")->set_input_default(DEVICE_INPUT_DEFAULTS_NAME(vga));
}
rs232_port_device &rs232h(RS232_PORT(config, RS232_H_TAG, default_rs232_devices, "null_modem"));
rs232h.rxd_handler().set(m_acia0, FUNC(acia6850_device::write_rxd));
rs232h.dcd_handler().set(m_acia0, FUNC(acia6850_device::write_dcd));
rs232h.cts_handler().set(m_acia0, FUNC(acia6850_device::write_cts));
ACIA6850(config, m_acia1, 0);
m_acia1->txd_handler().set(RS232_K_TAG, FUNC(rs232_port_device::write_txd));
m_acia1->rts_handler().set(RS232_K_TAG, FUNC(rs232_port_device::write_rts));
m_acia1->irq_handler().set_inputline(m_maincpu, M68K_IRQ_1);
rs232_port_device &rs232k(RS232_PORT(config, RS232_K_TAG, default_rs232_devices, "keyboard"));
rs232k.rxd_handler().set(m_acia1, FUNC(acia6850_device::write_rxd));
rs232k.dcd_handler().set(m_acia1, FUNC(acia6850_device::write_dcd));
rs232k.cts_handler().set(m_acia1, FUNC(acia6850_device::write_cts));
rs232k.set_option_device_input_defaults("keyboard", DEVICE_INPUT_DEFAULTS_NAME(kbd_rs232_defaults));
ACIA6850(config, m_acia2, 0);
m_acia2->txd_handler().set(RS232_D_TAG, FUNC(rs232_port_device::write_txd));
m_acia2->rts_handler().set(RS232_D_TAG, FUNC(rs232_port_device::write_rts));
m_acia2->irq_handler().set_inputline(m_maincpu, M68K_IRQ_1);
rs232_port_device &rs232d(RS232_PORT(config, RS232_D_TAG, default_rs232_devices, nullptr));
rs232d.rxd_handler().set(m_acia2, FUNC(acia6850_device::write_rxd));
rs232d.dcd_handler().set(m_acia2, FUNC(acia6850_device::write_dcd));
rs232d.cts_handler().set(m_acia2, FUNC(acia6850_device::write_cts));
// XXX actual part may be something else
COM8116(config, m_dbrga, 5.0688_MHz_XTAL);
m_dbrga->fr_handler().set(FUNC(bitgraph_state::com8116_a_fr_w));
m_dbrga->ft_handler().set(FUNC(bitgraph_state::com8116_a_ft_w));
//-------------------------------------------------
ROM_START( x68k_cz6bs1 )
ROM_REGION( 0x10000, "scsiexrom", 0 )
ROM_LOAD16_WORD_SWAP( "scsiexrom.bin", 0x0000, 0x2000, CRC(7be488de) SHA1(49616c09a8986ffe6a12ad600febe512f7ba8ae4) )
ROM_END
const tiny_rom_entry *x68k_scsiext_device::device_rom_region() const
{
return ROM_NAME( x68k_cz6bs1 );
}
// device machine config
MACHINE_CONFIG_START(x68k_scsiext_device::device_add_mconfig)
SCSI_PORT(config, m_scsibus);
m_scsibus->set_slot_device(1, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_0));
m_scsibus->set_slot_device(2, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_1));
m_scsibus->set_slot_device(3, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_2));
m_scsibus->set_slot_device(4, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_3));
m_scsibus->set_slot_device(5, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_4));
m_scsibus->set_slot_device(6, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_5));
m_scsibus->set_slot_device(7, "harddisk", SCSIHD, DEVICE_INPUT_DEFAULTS_NAME(SCSI_ID_6));
MB89352A(config, m_spc);
m_spc->set_scsi_port("scsi");
m_spc->irq_cb().set(FUNC(x68k_scsiext_device::irq_w));
m_spc->drq_cb().set(FUNC(x68k_scsiext_device::drq_w));
MACHINE_CONFIG_END
x68k_scsiext_device::x68k_scsiext_device(const machine_config &mconfig, const char *tag, device_t *owner, uint32_t clock)
: device_t(mconfig, X68K_SCSIEXT, tag, owner, clock)
void bullet_state::bullet(machine_config &config)
{
// basic machine hardware
Z80(config, m_maincpu, 16_MHz_XTAL / 4);
m_maincpu->set_addrmap(AS_PROGRAM, &bullet_state::bullet_mem);
m_maincpu->set_addrmap(AS_IO, &bullet_state::bullet_io);
m_maincpu->set_daisy_config(daisy_chain);
// devices
Z80CTC(config, m_ctc, 16_MHz_XTAL / 4);
m_ctc->intr_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
m_ctc->zc_callback<0>().set(FUNC(bullet_state::dart_rxtxca_w));
m_ctc->zc_callback<1>().set(m_dart, FUNC(z80dart_device::rxtxcb_w));
m_ctc->zc_callback<2>().set(m_ctc, FUNC(z80ctc_device::trg3));
TIMER(config, "ctc").configure_periodic(FUNC(bullet_state::ctc_tick), attotime::from_hz(4.9152_MHz_XTAL / 4));
Z80DART(config, m_dart, 16_MHz_XTAL / 4);
m_dart->out_txda_callback().set(RS232_A_TAG, FUNC(rs232_port_device::write_txd));
m_dart->out_dtra_callback().set(RS232_A_TAG, FUNC(rs232_port_device::write_dtr));
m_dart->out_rtsa_callback().set(RS232_A_TAG, FUNC(rs232_port_device::write_rts));
m_dart->out_wrdya_callback().set(FUNC(bullet_state::dartardy_w));
m_dart->out_txdb_callback().set(RS232_B_TAG, FUNC(rs232_port_device::write_txd));
m_dart->out_dtrb_callback().set(RS232_B_TAG, FUNC(rs232_port_device::write_dtr));
m_dart->out_rtsb_callback().set(RS232_B_TAG, FUNC(rs232_port_device::write_rts));
m_dart->out_wrdyb_callback().set(FUNC(bullet_state::dartbrdy_w));
m_dart->out_int_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
Z80DMA(config, m_dmac, 16_MHz_XTAL / 4);
m_dmac->out_busreq_callback().set_inputline(m_maincpu, INPUT_LINE_HALT);
m_dmac->out_int_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
m_dmac->in_mreq_callback().set(FUNC(bullet_state::dma_mreq_r));
m_dmac->out_mreq_callback().set(FUNC(bullet_state::dma_mreq_w));
m_dmac->in_iorq_callback().set(FUNC(bullet_state::io_read_byte));
m_dmac->out_iorq_callback().set(FUNC(bullet_state::io_write_byte));
z80pio_device& pio(Z80PIO(config, Z80PIO_TAG, 16_MHz_XTAL / 4));
pio.out_int_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
pio.out_pa_callback().set("cent_data_out", FUNC(output_latch_device::bus_w));
pio.in_pb_callback().set(FUNC(bullet_state::pio_pb_r));
MB8877(config, m_fdc, 16_MHz_XTAL / 16);
m_fdc->intrq_wr_callback().set(m_dart, FUNC(z80dart_device::dcda_w));
m_fdc->drq_wr_callback().set(FUNC(bullet_state::fdc_drq_w));
FLOPPY_CONNECTOR(config, MB8877_TAG":0", bullet_525_floppies, "525qd", floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":1", bullet_525_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":2", bullet_525_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":3", bullet_525_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":4", bullet_8_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":5", bullet_8_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":6", bullet_8_floppies, nullptr, floppy_image_device::default_floppy_formats);
FLOPPY_CONNECTOR(config, MB8877_TAG":7", bullet_8_floppies, nullptr, floppy_image_device::default_floppy_formats);
CENTRONICS(config, m_centronics, centronics_devices, "printer");
m_centronics->busy_handler().set(FUNC(bullet_state::write_centronics_busy));
m_centronics->perror_handler().set(FUNC(bullet_state::write_centronics_perror));
m_centronics->select_handler().set(FUNC(bullet_state::write_centronics_select));
m_centronics->fault_handler().set(FUNC(bullet_state::write_centronics_fault));
output_latch_device ¢_data_out(OUTPUT_LATCH(config, "cent_data_out"));
m_centronics->set_output_latch(cent_data_out);
rs232_port_device &rs232a(RS232_PORT(config, RS232_A_TAG, default_rs232_devices, "terminal"));
rs232a.rxd_handler().set(m_dart, FUNC(z80dart_device::rxa_w));
rs232a.set_option_device_input_defaults("terminal", DEVICE_INPUT_DEFAULTS_NAME(terminal));
rs232_port_device &rs232b(RS232_PORT(config, RS232_B_TAG, default_rs232_devices, nullptr));
rs232b.rxd_handler().set(m_dart, FUNC(z80dart_device::rxb_w));
// software lists
SOFTWARE_LIST(config, "flop_list").set_original("wmbullet");
// internal ram
RAM(config, RAM_TAG).set_default_size("128K");
}
