//入口
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
//各种相应函数
DXUTSetCallbackDeviceCreated( OnCreateDevice );
DXUTSetCallbackDeviceReset( OnResetDevice );
DXUTSetCallbackDeviceLost( OnLostDevice );
DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCursorSettings( true, true );
InitApp();
// 创建 窗口
DXUTInit( true, true, true );
DXUTCreateWindow( L"Water Drop" );
DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 700, 700, IsDeviceAcceptable, ModifyDeviceSettings );
//由于最大化会造成形变，这里我们禁用最大化
HWND hWnd=GetActiveWindow();
LONG style=GetWindowLong(hWnd,GWL_STYLE);
style &=~(WS_MAXIMIZEBOX);
SetWindowLong(hWnd,GWL_STYLE,style);
DXUTMainLoop();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE /*hInstance*/, HINSTANCE /*hPrevInstance*/, LPWSTR /*lpCmdLine*/, INT /*nCmdShow*/)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
InitApp();
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTCreateWindow(L"CascadedShadowDepthMap");
CWaitDlg CompilingShadersDlg;
if (DXUT_EnsureD3D11APIs())
CompilingShadersDlg.ShowDialog(L"Compiling Shaders and loading models.");
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 800, 600);
CompilingShadersDlg.DestroyDialog();
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"D3D10 Shader Model 4.0 Workshop: Exercise03" );
DXUTCreateDevice( true, 800, 600 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true ); // Use this line instead to try to create a hardware device
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"AdaptiveTessellationCS40" );
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_0, true, 1024, 768 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance,
LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Disable gamma correction on this sample
DXUTSetIsInGammaCorrectMode( false );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackMouse( MouseProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true );
DXUTSetCursorSettings( true, true );// Show the cursor and clip when in full screen
DXUTCreateWindow( L"Contact Hardening Shadows - Direct3D 11" );
DXUTCreateDevice( D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// _crtBreakAlloc = 862;
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true );
DXUTCreateWindow( L"SimpleSample" );
DXUTCreateDevice( true, g_nWinSizeX, g_nWinSizeY);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions
DXUTSetCallbackDeviceCreated( OnCreateDevice );
DXUTSetCallbackDeviceReset( OnResetDevice );
DXUTSetCallbackDeviceLost( OnLostDevice );
DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
// Initialize world matrices
// D3DXMatrixScaling( &g_mCellWorld, 1.0f, GROUND_Y / 3.0f, 1.0f );
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"d3dapp" );
DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 640, 480, IsDeviceAcceptable, ModifyDeviceSettings );
MyAppInit();
// Start the render loop
DXUTMainLoop();
// TODO: Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"BasicHLSL11" );
DXUTCreateDevice (D3D_FEATURE_LEVEL_11_0, true, 800, 600 );
//DXUTCreateDevice(true, 640, 480);
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
INT WINAPI wWinMain(HINSTANCE, HINSTANCE, LPWSTR, int)
{
DXUTSetCallbackD3D9DeviceAcceptable(IsDeviceAcceptable);
DXUTSetCallbackD3D9DeviceCreated(OnCreateDevice);
DXUTSetCallbackD3D9FrameRender(OnFrameRender);
DXUTSetCallbackD3D9DeviceReset(OnResetDevice);
DXUTSetCallbackD3D9DeviceLost(OnLostDevice);
DXUTSetCallbackD3D9DeviceDestroyed(OnDestroyDevice);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(KeyboardProc);
DXUTSetCallbackMouse(MouseProc, true);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCursorSettings(true, true);
InitApp();
DXUTInit();
DXUTSetHotkeyHandling();
DXUTCreateWindow(L"NsRenju by Ivan Goremykin");
DXUTCreateDevice(true, 1024, 768);
DXUTMainLoop();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCursorSettings( true, true );
InitApp();
DXUTInit( true, true ); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling( true, true, true );
DXUTCreateWindow( L"CompiledEffect" );
DXUTCreateDevice( true, 640, 480 );
DXUTMainLoop();
return DXUTGetExitCode();
}
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int ) {
d3d_engine = new D3DEngine();
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10ResizedSwapChain );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10ReleasingSwapChain );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTInit(true, true, NULL); // DXUTを初期化(詳しくはMSDN)
DXUTSetCursorSettings(true, true); // カーソルを表示し、全画面の時には、領域からはみ出ないようにします
DXUTCreateWindow(kWindowTitle);
DXUTCreateDevice(true, kWindowWidth, kWindowHeight);
DXUTMainLoop(); // DXUTのレンダリングループを開始
return DXUTGetExitCode();
}
Game::Game(
) : m_content(".\\..\\Content\\Out", ".\\..\\Content\\Content.pack"),
m_camera(new Camera()),
m_sceneRoot(new scene::SceneNode()),
m_meshQueue(new scene::MeshQueue()),
m_scriptEngine(new script::ScriptEngine()),
m_renderer(new scene::Renderer(*m_scriptEngine, *m_meshQueue))
{
DXUTSetCallbackKeyboard(&m_camera->OnKeyboard);
DXUTSetCallbackMouse(&m_camera->OnMouse, true);
D3DXMatrixIdentity(&m_identity);
}
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
HRESULT hr = S_OK;
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCursorSettings( false, true );
DXUTInit( true, true );
DXUTSetHotkeyHandling( false, false, false );
InitApp();
hr = PrepareAudio();
if( FAILED( hr ) )
{
OutputDebugString( L"PrepareAudio() failed. Disabling audio support\n" );
}
DXUTCreateWindow( L"Buser Stima" );
DXUTCreateDevice( false, 0, 0 );
DXUTMainLoop();
CleanupAudio();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions. These functions allow DXUT to notify
// the application about device changes, user input, and windows messages. The
// callbacks are optional so you need only set callbacks for events you're interested
// in. However, if you don't handle the device reset/lost callbacks then the sample
// framework won't be able to reset your device since the application must first
// release all device resources before resetting. Likewise, if you don't handle the
// device created/destroyed callbacks then DXUT won't be able to
// recreate your device resources.
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
// Show the cursor and clip it when in full screen
DXUTSetCursorSettings( true, true );
if (InitApp())
{
// Initialize DXUT and create the desired Win32 window and Direct3D
// device for the application. Calling each of these functions is optional, but they
// allow you to set several options which control the behavior of the framework.
DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTCreateWindow( L"UWGame" );
g_Sound.Initialize( DXUTGetHWND(), DSSCL_PRIORITY );
DXUTCreateDevice( true, 800, 600 );
// Pass control to DXUT for handling the message pump and
// dispatching render calls. DXUT will call your FrameMove
// and FrameRender callback when there is idle time between handling window messages.
DXUTMainLoop();
CleanupApp();
}
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );
// Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
// Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
// Perform any application-level initialization here
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"Awe Engine" );
// Only require 10-level hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 640, 480 );
DXUTMainLoop(); // Enter into the DXUT ren der loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackDeviceRemoved( OnDeviceRemoved );
// Set the D3D9 DXUT callbacks. Remove these sets if the app doesn't need to support D3D9
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
// Perform any application-level initialization here
// Setup Video
VideoSetup setup(1024,720);
setup.isWindowed = true;
// Rename Game Title
g_strGameTitle = L"MyGame";
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
//HICON hIcon = (HICON)LoadImage(NULL, L"..\..\resources\WindowIcon.ico", IMAGE_ICON, 32, 32, LR_LOADFROMFILE);
DXUTCreateWindow(g_strGameTitle);
DXUTCreateDevice(setup.isWindowed, setup.height, setup.witdh);
DXUTMainLoop(); // Enter into the DXUT render loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow)
{
HRESULT hr;
V_RETURN(DXUTSetMediaSearchPath(MEDIA_PATH));
// Enable run-time memory check for debug builds.
#if defined(DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
// Set general DXUT callbacks
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackMouse(OnMouse);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackDeviceRemoved(OnDeviceRemoved);
// Set the D3D11 DXUT callbacks
DXUTSetCallbackD3D11DeviceAcceptable (IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated (OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized (OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender (OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed (OnD3D11DestroyDevice);
// Perform any application-level initialization here
InitAOParams(g_AOParams);
InitGUI();
UINT Width = 1920;
UINT Height = 1200;
DXUTInit(true, true, NULL); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTSetIsInGammaCorrectMode(false); // Do not use a SRGB back buffer for this sample
DXUTCreateWindow(L"Deinterleaved Texturing");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, Width, Height);
//DXUTToggleFullScreen();
DXUTMainLoop(); // Enter into the DXUT render loop
// Perform any application-level cleanup here
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF | _CRTDBG_CHECK_ALWAYS_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D11)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse, true );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true );
WCHAR strWindowTitle[128] = L"TiledResources11";
#ifdef _DEBUG
wcscat_s( strWindowTitle, L" [DEBUG]" );
#endif
DXUTCreateWindow( strWindowTitle );
// set the update & render thread to the first hardware thread
SetThreadAffinityMask( GetCurrentThread(), 0x1 );
// Only require 10-level hardware, change to D3D_FEATURE_LEVEL_11_0 to require 11-class hardware
// Switch to D3D_FEATURE_LEVEL_9_x for 10level9 hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_0, true, 1280, 720 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Entry point to the program. Initializes everything and goes into a message processing
// loop. Idle time is used to render the scene.
//--------------------------------------------------------------------------------------
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
//-------------------------------------------------------------------------
//Initialize test command window
//-------------------------------------------------------------------------
RedirectIOToConsole(L"output window");
// DXUT will create and use the best device (either D3D9 or D3D10)
// that is available on the system depending on which D3D callbacks are set below
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackD3D10DeviceAcceptable( IsD3D10DeviceAcceptable );
DXUTSetCallbackD3D10DeviceCreated( OnD3D10CreateDevice );
DXUTSetCallbackD3D10SwapChainResized( OnD3D10SwapChainResized );
DXUTSetCallbackD3D10FrameRender( OnD3D10FrameRender );
DXUTSetCallbackD3D10SwapChainReleasing( OnD3D10SwapChainReleasing );
DXUTSetCallbackD3D10DeviceDestroyed( OnD3D10DestroyDevice );
HRESULT hr;
V_RETURN(DXUTSetMediaSearchPath(L"..\\Source\\SoftShadows"));
InitApp();
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"SoftShadows" );
DXUTCreateDevice( true, 1024, 768 );
DXUTMainLoop(); // Enter into the DXUT render loop
return DXUTGetExitCode();
}
HRESULT R3D3D::Init( bool isWindows, int width, int height )
{
DXUTSetCallbackD3D9DeviceAcceptable( IsDeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnCreateDevice );
DXUTSetCallbackD3D9FrameRender( OnFrameRender );
DXUTSetCallbackD3D9DeviceReset( OnResetDevice );
DXUTSetCallbackD3D9DeviceLost( OnLostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTInit( true, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"EmptyProject" );
DXUTCreateDevice( isWindows, width, height );
// Start the render loop
DXUTMainLoop();
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI WinMain( HINSTANCE, HINSTANCE, LPSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
// Set the callback functions
DXUTSetCallbackDeviceCreated( OnCreateDevice );
DXUTSetCallbackDeviceReset( OnResetDevice );
DXUTSetCallbackDeviceLost( OnLostDevice );
DXUTSetCallbackDeviceDestroyed( OnDestroyDevice );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( KeyboardProc );
DXUTSetCallbackMouse( MouseProc );
DXUTSetCallbackFrameRender( OnFrameRender );
DXUTSetCallbackFrameMove( OnFrameMove );
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, false, true ); // Parse the command line, handle the default hotkeys, and show msgboxes
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"Globalization" );
DXUTCreateDevice( D3DADAPTER_DEFAULT, true, 1024, 768, IsDeviceAcceptable, ModifyDeviceSettings );
InitApp();
// Start the render loop
DXUTMainLoop();
CleanupApp();
#if defined(DEBUG) || defined(_DEBUG)
// Functions to pinpoint memory leaks
// _CrtDumpMemoryLeaks ();
_CrtCheckMemory();
#endif
return DXUTGetExitCode();
}
//--------------------------------------------------------------------------------------
// Initialize everything and go into a render loop
//--------------------------------------------------------------------------------------
INT WINAPI wWinMain( HINSTANCE, HINSTANCE, LPWSTR, int )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
//_CrtSetDbgFlag( _CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF );
#endif
srand((unsigned)time(NULL));
// Set the callback functions
DXUTSetCallbackD3D9DeviceAcceptable( IsD3D9DeviceAcceptable );
DXUTSetCallbackD3D9DeviceCreated( OnD3D9CreateDevice );
DXUTSetCallbackD3D9DeviceReset( OnD3D9ResetDevice );
DXUTSetCallbackD3D9FrameRender( OnD3D9FrameRender );
DXUTSetCallbackD3D9DeviceLost( OnD3D9LostDevice );
DXUTSetCallbackD3D9DeviceDestroyed( OnD3D9DestroyDevice );
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackFrameMove( OnFrameMove );
DXUTSetCallbackKeyboard( OnKeyboard );
// TODO: Perform any application-level initialization here
// Initialize DXUT and create the desired Win32 window and Direct3D device for the application
DXUTInit( true, true ); // Parse the command line and show msgboxes
DXUTSetHotkeyHandling( false
, false, true ); // handle the default hotkeys
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
DXUTCreateWindow( L"dokdo_pasta" );
DXUTCreateDevice( false, 800, 600 );
// Start the render loop
DXUTMainLoop();
StageManager::GetSingleton().Release();
// TODO: Perform any application-level cleanup here
return DXUTGetExitCode();
}
void CDirect3DView::OnInitialUpdate()
{
__super::OnInitialUpdate();
if (DXUTGetD3D11Device() != NULL)
{
return;
}
DXUTSetIsInGammaCorrectMode(false);
// Set general DXUT callbacks
DXUTSetCallbackFrameMove( OnDXUTFrameMove, this );
DXUTSetCallbackKeyboard( OnDXUTKeyboard, this );
DXUTSetCallbackMouse( OnDXUTMouse, true, this );
DXUTSetCallbackMsgProc( DXUTMsgProc, this );
DXUTSetCallbackDeviceChanging( DXUTModifyDeviceSettings, this );
DXUTSetCallbackDeviceRemoved( OnDXUTDeviceRemoved, this );
// Set the D3D11 DXUT callbacks. Remove these sets if the app doesn't need to support D3D11
DXUTSetCallbackD3D11DeviceAcceptable( DXUTIsD3D11DeviceAcceptable, this );
DXUTSetCallbackD3D11DeviceCreated( OnDXUTD3D11CreateDevice, this );
DXUTSetCallbackD3D11SwapChainResized( OnDXUTD3D11ResizedSwapChain, this );
DXUTSetCallbackD3D11FrameRender( OnDXUTD3D11FrameRender, this );
DXUTSetCallbackD3D11SwapChainReleasing( OnDXUTD3D11ReleasingSwapChain, this );
DXUTSetCallbackD3D11DeviceDestroyed( OnDXUTD3D11DestroyDevice, this );
DXUTInit( true, true, NULL ); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings( true, true ); // Show the cursor and clip it when in full screen
// Create DXUT stuff
DXUTSetWindow( this->GetSafeHwnd(), this->GetSafeHwnd(), this->GetSafeHwnd(), false );
CRect rect;
GetClientRect(&rect);
// Only require 10-level hardware
DXUTCreateDevice( D3D_FEATURE_LEVEL_10_1, true, rect.right, rect.bottom );
}
INT WINAPI wWinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance,LPWSTR lpCmdLine,int nShowCmd)
{
DXUTSetCallbackD3D10DeviceAcceptable(IsD3D10DeviceAcceptable);
DXUTSetCallbackD3D10DeviceCreated(OnD3D10CreateDevice);
DXUTSetCallbackD3D10DeviceDestroyed(OnD3D10DestroyDevice);
DXUTSetCallbackD3D10FrameRender(OnD3D10FrameRender);
DXUTSetCallbackD3D10SwapChainReleasing(OnD3D10SwapChainReleasing);
DXUTSetCallbackD3D10SwapChainResized(OnD3D10SwapChainResized);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(KeyboardProc);
initApp();
V(DXUTInit(true,true));
V(DXUTCreateWindow(L"CGRambler2.0 华南师范大学 李海全 [email protected]"));
V(DXUTCreateDevice(true,Width,Height));
DXUTSetCursorSettings(true,true);
V(DXUTMainLoop());
return DXUTGetExitCode();
}
int WINAPI wWinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, INT nCmdShow)
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
#pragma region Callback Calls
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
#pragma endregion
DXUTSetIsInGammaCorrectMode(true);
DXUTInit(true, true, 0);
InitUI();
#pragma region Adjust Display and Handling Settings
DXUTSetCursorSettings(true, true);
DXUTSetHotkeyHandling(true, true, false);
DXUTCreateWindow(L"Deferred Shading");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, 1280, 720);
#pragma endregion
DXUTMainLoop();
return DXUTGetExitCode();
}
void DXUTHelper::Render()
{
// Set general DXUT callbacks
DXUTSetCallbackFrameMove(OnFrameMove);
DXUTSetCallbackKeyboard(OnKeyboard);
DXUTSetCallbackMouse(OnMouse);
DXUTSetCallbackMsgProc(MsgProc);
DXUTSetCallbackDeviceChanging(ModifyDeviceSettings);
DXUTSetCallbackDeviceRemoved(OnDeviceRemoved);
DXUTSetCallbackD3D11DeviceAcceptable(IsD3D11DeviceAcceptable);
DXUTSetCallbackD3D11DeviceCreated(OnD3D11CreateDevice);
DXUTSetCallbackD3D11SwapChainResized(OnD3D11ResizedSwapChain);
DXUTSetCallbackD3D11FrameRender(OnD3D11FrameRender);
DXUTSetCallbackD3D11SwapChainReleasing(OnD3D11ReleasingSwapChain);
DXUTSetCallbackD3D11DeviceDestroyed(OnD3D11DestroyDevice);
DXUTInit(true, true, nullptr); // Parse the command line, show msgboxes on error, no extra command line params
DXUTSetCursorSettings(true, true); // Show the cursor and clip it when in full screen
DXUTCreateWindow(L"Tutorial08");
DXUTCreateDevice(D3D_FEATURE_LEVEL_11_0, true, m_ScreenWidth, m_ScreenHeight);
DXUTMainLoop();
}
int WINAPI wWinMain( HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR lpCmdLine, int nCmdShow )
{
// Enable run-time memory check for debug builds.
#if defined(DEBUG) | defined(_DEBUG)
_CrtSetDbgFlag(_CRTDBG_ALLOC_MEM_DF | _CRTDBG_LEAK_CHECK_DF);
#endif
Initialize();
// Set DXUT callbacks
DXUTSetCallbackDeviceChanging( ModifyDeviceSettings );
DXUTSetCallbackMsgProc( MsgProc );
DXUTSetCallbackKeyboard( OnKeyboard );
DXUTSetCallbackMouse( OnMouse, true );
DXUTSetCallbackD3D11DeviceAcceptable( IsD3D11DeviceAcceptable );
DXUTSetCallbackD3D11DeviceCreated( OnD3D11CreateDevice );
DXUTSetCallbackD3D11SwapChainResized( OnD3D11ResizedSwapChain );
DXUTSetCallbackD3D11FrameRender( OnD3D11FrameRender );
DXUTSetCallbackD3D11SwapChainReleasing( OnD3D11ReleasingSwapChain );
DXUTSetCallbackD3D11DeviceDestroyed( OnD3D11DestroyDevice );
InitApp();
if (gMultithreaded)
{
InitWin32Threads();
}
DXUTInit( true, true, NULL );
DXUTSetCursorSettings( true, true );
DXUTCreateWindow( L"ISPC HDR Texture Compressor" );
// Try to create a device with DX11 feature set
DXUTCreateDevice (D3D_FEATURE_LEVEL_11_0, true, 1280, 1024 );
BOOL DX11Available = false;
// If we don't have an adequate driver, then we revert to DX10 feature set...
DXUTDeviceSettings settings = DXUTGetDeviceSettings();
if(settings.d3d11.DriverType == D3D_DRIVER_TYPE_UNKNOWN || settings.d3d11.DriverType == D3D_DRIVER_TYPE_NULL) {
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_1, true, 1280, 1024);
// !HACK! Force enumeration here in order to relocate hardware with new feature level
DXUTGetD3D11Enumeration(true);
DXUTCreateDevice(D3D_FEATURE_LEVEL_10_1, true, 1280, 1024);
const TCHAR *noDx11msg = _T("Your hardware does not seem to support DX11. BC7 Compression is disabled.");
MessageBox(NULL, noDx11msg, _T("Error"), MB_OK);
}
else
{
DX11Available = true;
}
FillProfiles(DX11Available);
DXUTMainLoop();
// Destroy all of the threads...
DestroyThreads();
return DXUTGetExitCode();
}
