void Osd::HwInit() {
ZX_DEBUG_ASSERT(initialized_);
// Setup VPP horizontal width
WRITE32_REG(VPU, VPP_POSTBLEND_H_SIZE, display_width_);
// init vpu fifo control register
uint32_t regVal = READ32_REG(VPU, VPP_OFIFO_SIZE);
regVal = 0xfff << 20;
regVal |= (0xfff + 1);
WRITE32_REG(VPU, VPP_OFIFO_SIZE, regVal);
// init osd fifo control and set DDR request priority to be urgent
regVal = 1;
regVal |= 4 << 5; // hold_fifo_lines
regVal |= 1 << 10; // burst_len_sel 3 = 64. This bit is split between 10 and 31
regVal |= 2 << 22;
regVal |= 2 << 24;
regVal |= 1 << 31;
regVal |= 32 << 12; // fifo_depth_val: 32*8 = 256
WRITE32_REG(VPU, VPU_VIU_OSD1_FIFO_CTRL_STAT, regVal);
WRITE32_REG(VPU, VPU_VIU_OSD2_FIFO_CTRL_STAT, regVal);
SET_MASK32(VPU, VPP_MISC, VPP_POSTBLEND_EN);
CLEAR_MASK32(VPU, VPP_MISC, VPP_PREBLEND_EN);
// just disable osd to avoid booting hang up
regVal = 0x1 << 0;
regVal |= kOsdGlobalAlphaDef << 12;
regVal |= (1 << 21);
WRITE32_REG(VPU, VPU_VIU_OSD1_CTRL_STAT , regVal);
WRITE32_REG(VPU, VPU_VIU_OSD2_CTRL_STAT , regVal);
DefaultSetup();
EnableScaling(true);
// Apply scale coefficients
SET_BIT32(VPU, VPU_VPP_OSD_SCALE_COEF_IDX, 0x0000, 0, 9);
for (int i = 0; i < 33; i++) {
WRITE32_REG(VPU, VPU_VPP_OSD_SCALE_COEF, osd_filter_coefs_bicubic[i]);
}
SET_BIT32(VPU, VPU_VPP_OSD_SCALE_COEF_IDX, 0x0100, 0, 9);
for (int i = 0; i < 33; i++) {
WRITE32_REG(VPU, VPU_VPP_OSD_SCALE_COEF, osd_filter_coefs_bicubic[i]);
}
// update blending
WRITE32_REG(VPU, VPU_VPP_OSD1_BLD_H_SCOPE, display_width_ - 1);
WRITE32_REG(VPU, VPU_VPP_OSD1_BLD_V_SCOPE, display_height_ - 1);
WRITE32_REG(VPU, VPU_VPP_OUT_H_V_SIZE, display_width_ << 16 | display_height_);
}
int main(int argc,char *argv[]){
//WfmFlops = 0;
#if TARGET == QCDOC
DefaultSetup();
printf("Sizes = %d %d %d %d %d %d\n",SizeX(),SizeY(),SizeZ(),SizeT(),SizeS(),SizeW());
printf("Coors = %d %d %d %d %d %d\n",CoorX(),CoorY(),CoorZ(),CoorT(),CoorS(),CoorW());
#endif
FILE *fp;
double dtime;
//----------------------------------------------------------------
// Initializes all Global Job Parameters
//----------------------------------------------------------------
DoArg do_arg;
int nx,ny,nz,nt;
if (argc < 5){
ERR.General("f_clover_test","main()","usage: %s nx ny nz nt\n",argv[0]);
}
sscanf(argv[1],"%d",&nx);
sscanf(argv[2],"%d",&ny);
sscanf(argv[3],"%d",&nz);
sscanf(argv[4],"%d",&nt);
printf("total sites = %d %d %d %d\n",nx,ny,nz,nt);
do_arg.x_node_sites = nx/SizeX();
do_arg.y_node_sites = ny/SizeY();
do_arg.z_node_sites = nz/SizeZ();
do_arg.t_node_sites = nt/SizeT();
do_arg.s_node_sites = 0;
do_arg.x_nodes = SizeX();
do_arg.y_nodes = SizeY();
do_arg.z_nodes = SizeZ();
do_arg.t_nodes = SizeT();
do_arg.s_nodes = 1;
do_arg.x_bc = BND_CND_PRD;
do_arg.y_bc = BND_CND_PRD;
do_arg.z_bc = BND_CND_PRD;
do_arg.t_bc = BND_CND_APRD;
do_arg.start_conf_kind = START_CONF_DISORD;
do_arg.start_seed_kind = START_SEED_FIXED;
do_arg.beta = 5.5;
do_arg.dwf_height = 0.9;
do_arg.clover_coeff = 2.0171;
// do_arg.verbose_level = -1205;
do_arg.asqtad_KS = (1.0/8.0)+(6.0/16.0)+(1.0/8.0);
do_arg.asqtad_naik = -1.0/24.0;
do_arg.asqtad_3staple = (-1.0/8.0)*0.5;
do_arg.asqtad_5staple = ( 1.0/8.0)*0.25*0.5;
do_arg.asqtad_7staple = (-1.0/8.0)*0.125*(1.0/6.0);
do_arg.asqtad_lepage = -1.0/16;
VRB.Level(0);
VRB.ActivateLevel(VERBOSE_FUNC_LEVEL);
VRB.ActivateLevel(VERBOSE_FLOW_LEVEL);
VRB.ActivateLevel(VERBOSE_SMALLOC_LEVEL);
VRB.ActivateLevel(VERBOSE_RNGSEED_LEVEL);
CgArg cg_arg;
cg_arg.mass = 0.1;
cg_arg.stop_rsd = 1e-12;
cg_arg.max_num_iter = 500;
GJP.Initialize(do_arg);
// VRB.Level(GJP.VerboseLevel());
#if TARGET == QCDOC
char filename [200];
sprintf(filename,"%s%d%d%d%d%d%d_%d%d%d%d%d%d.out",f_wilson_test_filename,SizeX(),SizeY(),SizeZ(),SizeT(),SizeS(),SizeW(),CoorX(),CoorY(),CoorZ(),CoorT(),CoorS(),CoorW());
fp = Fopen(filename,"w");
#else
fp = Fopen("f_clover_test.out","w");
#endif
GwilsonFclover lat;
Vector *result =
(Vector*)smalloc(GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
Vector *X_out =
(Vector*)smalloc(GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
Vector *X_out2 =
(Vector*)smalloc(GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
if(!result) ERR.Pointer("","","result");
if(!X_out) ERR.Pointer("","","X_out");
if(!X_out2) ERR.Pointer("","","X_out2");
int s[4];
Vector *X_in =
(Vector*)smalloc(GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
bzero(X_in,GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
Vector *X_in2 =
(Vector*)smalloc(GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
bzero(X_in,GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
if(!X_in) ERR.Pointer("","","X_in");
#if 1
lat.RandGaussVector(X_in,1.0);
lat.RandGaussVector(X_in2,1.0);
#else
Matrix *gf = lat.GaugeField();
IFloat *gf_p = (IFloat *)lat.GaugeField();
for(s[3]=0; s[3]<GJP.NodeSites(3); s[3]++)
for(s[2]=0; s[2]<GJP.NodeSites(2); s[2]++)
for(s[1]=0; s[1]<GJP.NodeSites(1); s[1]++)
for(s[0]=0; s[0]<GJP.NodeSites(0); s[0]++) {
int n = lat.FsiteOffset(s);
IFloat *temp_p = (IFloat *)(gf+4*n+3);
IFloat crd = 1.0*s[0]+0.1*s[1]+0.01*s[2]+0.001*s[3];
#if TARGET==QCDOC
if(CoorX()==0 && CoorY()==0 && CoorZ()==0 && CoorT()==0 &&n==0) crd=1.0; else crd = 0.0;
#else
if(n==0) crd = 1.0; else crd = 0.0;
#endif
for(int v=0; v<6; v+=2){
if (v==0)
*((IFloat*)&X_in[n]+v) = crd;
else
*((IFloat*)&X_in[n]+v) = 0;
*((IFloat*)&X_in[n]+v+1) = 0.0;
}
}
#endif
Vector *out;
{
DiracOpClover dirac(lat,X_out,X_in,&cg_arg,CNV_FRM_NO);
for(int k = 0; k< 1; k++){
double maxdiff=0.;
printf("k=%d ",k);
if (k ==0)
out = result;
else
out = X_out;
bzero((char *)out, GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
lat.Fconvert(out,WILSON,CANONICAL);
lat.Fconvert(X_in,WILSON,CANONICAL);
int offset = GJP.VolNodeSites()*lat.FsiteSize()/ (2*6);
#if 1
#if 1
#if TARGET==QCDOC
int vol = nx*ny*nz*nt/(SizeX()*SizeY()*SizeZ()*SizeT());
#else
int vol = nx*ny*nz*nt;
#endif
// dtime = -dclock();
int iter = dirac.MatInv(out,X_in);
// dtime +=dclock();
// print_flops(WfmFlops,dtime);
printf("iter=%d\n",iter);
#else
dirac.Dslash(out,X_in+offset,CHKB_EVEN,DAG_NO);
dirac.Dslash(out+offset,X_in,CHKB_ODD,DAG_NO);
#endif
#endif
if (k == 0){
bzero((char *)X_out2, GJP.VolNodeSites()*lat.FsiteSize()*sizeof(IFloat));
#if 0
dirac.Dslash(X_out2,out+offset,CHKB_EVEN,DAG_NO);
dirac.Dslash(X_out2+offset,out,CHKB_ODD,DAG_NO);
#endif
lat.Fconvert(X_out2,CANONICAL,WILSON);
}
lat.Fconvert(out,CANONICAL,WILSON);
lat.Fconvert(X_in,CANONICAL,WILSON);
X_out2->FTimesV1PlusV2(-0.5/(cg_arg.mass+4.0),X_out2,out,GJP.VolNodeSites()*lat.FsiteSize());
Float dummy;
Float dt = 2;
for(s[3]=0; s[3]<GJP.NodeSites(3); s[3]++)
for(s[2]=0; s[2]<GJP.NodeSites(2); s[2]++)
for(s[1]=0; s[1]<GJP.NodeSites(1); s[1]++)
for(s[0]=0; s[0]<GJP.NodeSites(0); s[0]++) {
int n = lat.FsiteOffset(s)*lat.SpinComponents();
for(int i=0; i<(lat.FsiteSize()/2); i++){
#if TARGET == QCDOC
if ( k==0 )
Fprintf(fp," %d %d %d %d %d ", CoorX()*GJP.NodeSites(0)+s[0], CoorY()*GJP.NodeSites(1)+s[1], CoorZ()*GJP.NodeSites(2)+s[2], CoorT()*GJP.NodeSites(3)+s[3], i);
#else
if ( k==0 )
Fprintf(fp," %d %d %d %d %d ", s[0], s[1], s[2], s[3], i);
#endif
if ( k==0 )
Fprintf(fp," (%0.7e %0.7e) (%0.7e %0.7e)",
*((IFloat*)&result[n]+i*2), *((IFloat*)&result[n]+i*2+1),
*((IFloat*)&X_in[n]+i*2), *((IFloat*)&X_in[n]+i*2+1));
#if 0
Fprintf(fp," (%0.2e %0.2e)\n",
#if 0
*((IFloat*)&X_out2[n]+i*2)-*((IFloat*)&X_in[n]+i*2),
*((IFloat*)&X_out2[n]+i*2+1)-*((IFloat*)&X_in[n]+i* 2+1));
#else
*((IFloat*)&X_out2[n]+i*2),
*((IFloat*)&X_out2[n]+i*2+1));
#endif
#else
Fprintf(fp,"\n");
#endif
double diff = *((IFloat*)&X_out2[n]+i*2)-*((IFloat*)&X_in[n]+i*2);
if (fabs(diff)>maxdiff) maxdiff = fabs(diff);
diff = *((IFloat*)&X_out2[n]+i*2+1)-*((IFloat*)&X_in[n]+i* 2+1);
if (fabs(diff)>maxdiff) maxdiff = fabs(diff);
}
}
printf("Max diff between X_in and M*X_out = %0.2e\n", maxdiff);
}
}
Fclose(fp);
sfree(X_in);
sfree(result);
sfree(X_out);
sfree(X_out2);
return 0;
}
