/**
* \brief OIL job exit function.
*
* This function is called to notify the RIP that a job has completed and
* that the resources claimed by the job can now be freed. It requires that
* the system be in one of \c OIL_Sys_JobCancel, \c OIL_Sys_JobActive or
* \c OIL_Sys_Inactive states when the function is entered.\n
* This function:
* \arg requests that the RIP end the current job;
* \arg discards remaining pages in the job;
* \arg cleans up any partial pages;
* \arg deletes the job;
* \arg configures the RIP according to the settings in the next job, if any, and
* \arg places the system into the next requested state, if it is not already inactive.
*
* This function does not cause the RIP to exit.
*
* \param[in] eNextState The system state that is required by the end of the call.
* \return Returns TRUE if the post-job cleanup is successful and the OIL is
* placed in the requested state, FALSE otherwise.
*/
int JobExit(OIL_eTySystemState eNextState)
{
char szJobName[OIL_MAX_JOBNAME_LENGTH];
int GPSPlotCloseretval;
int GPSSinCloseretval ;
int GPSSoutCloseretval;
int GPSSoutFlushretval;
int GPSSoutWriteretval;
long len,i;
int fin = GPS_INTERP_FIN_NORMAL, uel_found=1;
HQASSERT(OIL_Sys_JobCancel == g_SystemState.eCurrentState ||
OIL_Sys_JobActive == g_SystemState.eCurrentState ||
OIL_Sys_Inactive == g_SystemState.eCurrentState,
"job_exit entered in invalid state");
GG_SHOW(GG_SHOW_OIL, "JobExit:\n");
/* release resources */
while (g_ulGGtiming_pagecount != 0)
{
/* wait - until all the pages have been output */
OIL_RelinquishTimeSlice();
}
/* free(g_pstCurrentJob); */
{
if (!SwLeJobEnd())
{
/* Report this error */
GG_SHOW(GG_SHOW_OIL, "job_exit: Failed to finish job \n");
}
}
if(OIL_Sys_Inactive != g_SystemState.eCurrentState)
{
g_SystemState.eCurrentState = eNextState;
}
/* At this point RIPping must have completed and oil should have received data for all pages from the RIP*/
g_pstCurrentJob->eJobStatus = OIL_Job_RipDone;
/* keep the jobname safe for use in timing log before deleting job */
strcpy(szJobName, g_pstCurrentJob->szJobName);
/* Wait for all pages to be removed */
while(g_pstCurrentJob->pPage!=NULL)
{
OIL_RelinquishTimeSlice();
}
/* check for incomplete pages which can be a result of job cancel */
if (g_pstCurrentPage)
{
DeleteOILPage(g_pstCurrentPage);
g_pstCurrentPage = 0;
}
if(event_Cancel_flag == TRUE)
{
gpsInterpNotifyState(&gps_client, GPS_INTERP_STATE_FLUSHING);
gpsFrameCancel(&gps_client,gps_frameid);
gpsPlotCancel(&gps_client, PlotSet_plotid);
fin = GPS_INTERP_FIN_CANCEL;
}
#ifndef PMS_OIL_MERGE_DISABLE_JS
/***********Call to gpsflush and gpswrite for buffer1***************************/
if(*buffer1!=NULL)
{
if(host_outBuff)
{
GPSSoutFlushretval=GPS_SoutFlush(host_outBuff);
if(GPSSoutFlushretval==0)
{
printf("GPS_SoutFlush : Success\n");
}
else
{
printf("GPS_SoutFlush : Failed\n");
}
}
len=0;
for(i=0;buffer1[i]!='\0';i++)
len++;
printf(" 1 size of hostbuff = %d\n",sizeof(host_outBuff));
GPSSoutWriteretval=GPS_SoutWrite(host_outBuff,buffer1,len,GPS_HOST_NONBLOCK);
if(GPSSoutWriteretval >= 0)
{
printf("GPS_SoutWrite : Success\n");
}
else
{
printf("GPS_SoutWrite : Failed\n");
}
}
/***********Call to gpsflush and gpswrite for buff2***************************/
if(*buffer2!=NULL)
{
if(host_outBuff)
{
GPSSoutFlushretval=GPS_SoutFlush(host_outBuff);
if(GPSSoutFlushretval==0)
{
printf("GPS_SoutFlush : Success\n");
}
else
{
printf("GPS_SoutFlush : Failed\n");
}
}
printf(" 2 size of hostbuff = %d\n",sizeof(host_outBuff));
len=0;
for(i=0;buffer2[i]!='\0';i++)
len++;
GPSSoutWriteretval=GPS_SoutWrite(host_outBuff,buffer2,len,GPS_HOST_NONBLOCK);
if(GPSSoutWriteretval >= 0)
{
printf("GPS_SoutWrite : Success\n");
}
else
{
printf("GPS_SoutWrite : Failed\n");
}
}
/***********Call to gpsflush and gpswrite for buff3***************************/
if(*buffer3!=NULL)
{
if(host_outBuff)
{
GPSSoutFlushretval=GPS_SoutFlush(host_outBuff);
if(GPSSoutFlushretval==0)
{
printf("GPS_SoutFlush : Success\n");
}
else
{
printf("GPS_SoutFlush : Failed\n");
}
}
printf(" 3 size of hostbuff = %d\n",sizeof(host_outBuff));
len=0;
for(i=0;buffer3[i]!='\0';i++)
len++;
GPSSoutWriteretval=GPS_SoutWrite(host_outBuff,buffer3,len,GPS_HOST_NONBLOCK);
if(GPSSoutWriteretval >= 0)
{
printf("GPS_SoutWrite : Success\n");
}
else
{
printf("GPS_SoutWrite : Failed\n");
}
}
/***********Call to gpsflush and gpswrite for buff4***************************/
if(*buffer4!=NULL)
{
if(host_outBuff)
{
GPSSoutFlushretval=GPS_SoutFlush(host_outBuff);
if(GPSSoutFlushretval==0)
{
printf("GPS_SoutFlush : Success\n");
}
else
{
printf("GPS_SoutFlush : Failed\n");
}
}
printf(" 4 size of hostbuff = %d\n",sizeof(host_outBuff));
len=0;
for(i=0;buffer4[i]!='\0';i++)
len++;
GPSSoutWriteretval=GPS_SoutWrite(host_outBuff,buffer4,len,GPS_HOST_NONBLOCK);
if(GPSSoutWriteretval >= 0)
{
printf("GPS_SoutWrite : Success\n");
}
else
{
printf("GPS_SoutWrite : Failed\n");
}
}
/***********Call to gpsflush and gpswrite for buff5***************************/
if(*buffer5!=NULL)
{
if(host_outBuff)
{
GPSSoutFlushretval=GPS_SoutFlush(host_outBuff);
if(GPSSoutFlushretval==0)
{
printf("GPS_SoutFlush : Success\n");
}
else
{
printf("GPS_SoutFlush : Failed\n");
}
}
printf(" 5 size of hostbuff = %d\n",sizeof(host_outBuff));
len=0;
for(i=0;buffer5[i]!='\0';i++)
len++;
GPSSoutWriteretval=GPS_SoutWrite(host_outBuff,buffer5,len,GPS_HOST_NONBLOCK);
if(GPSSoutWriteretval >= 0)
{
printf("GPS_SoutWrite : Success\n");
}
else
{
printf("GPS_SoutWrite : Failed\n");
}
}
/***********Call to GpsPlotclose***************************/
/* AppendJob = True. Don't close the Output channel, next job uses same.
AppendJob = False. Close the Output channel, job ends here.
*/
if(AppendJob == 0)
{
GPSPlotCloseretval = GPS_PlotClose(gps_client, PlotSet_plotid);
if(GPSPlotCloseretval>=0)
{
printf("GPS_PlotClose : Success\n");
}
else
{
printf("GPS_PlotClose : Failed\n");
}
PlotSet_plotid = -1;
/***********Call to GpsSinclose***************************/
if (host_inBuff || host_outBuff)
{
GPSSinCloseretval=GPS_SinClose(host_inBuff);
if(GPSSinCloseretval==0)
{
printf("GPS_SinClose : Success\n");
host_inBuff = NULL;
}
else
{
printf("GPS_SinClose : Failed\n");
}
/***********Call to GpsSoutclose***************************/
GPSSoutCloseretval=GPS_SoutClose(host_outBuff);
if(GPSSoutCloseretval==0)
{
printf("GPS_SoutClose : Success\n");
host_outBuff = NULL;
}
else
{
printf("GPS_SoutClose : Failed\n");
}
/***********Call to GpsInterpfinishProcdata***************************/
GPS_InterpFinishProcData(gps_client, 1, fin, uel_found);
}
else
{
gpsInterpFinishTestprint(gps_client, jobid);
}
/*************Call to gpsInterpNotifyState()*************************************/
GPS_InterpNotifyState(gps_client, GPS_INTERP_STATE_FLUSHING); // Review - it should be GPS_INTERP_STATE_IDLE ?
}
#endif
/* Delete the job */
DeleteOILJob(g_pstCurrentJob->uJobId);
g_pstCurrentJob = NULL;
/* Reconfigure the features */
g_ConfigurableFeatures.g_ePaperSelectMode = g_NextJobConfiguration.g_ePaperSelectMode;
g_ConfigurableFeatures.g_uGGShow = g_NextJobConfiguration.g_uGGShow;
/* print out the timing data */
if(g_bLogTiming)
{
GGglobal_timing_dumplog((unsigned char*)szJobName);
}
/* reset data for next job */
GGglobal_timing(SW_TRACE_OIL_RESET, 0);
current_pdlid=0;
g_tJob.eTestPage = OIL_TESTPAGE_NONE;
/* return TRUE if now in requested state */
return (g_SystemState.eCurrentState == eNextState);
}
/**
* \brief Submit a fully rendered page to the PMS.
*
* This function is called once the OIL page is completely rendered. Before submitting
* the page to the PMS, various conditions are checked. The page will not be submitted
* if it is outside the range of pages to be printed for the job, or if it a blank page
* and blank page suppression has been activated. A page which is does not pass these
* tests is deleted.
*
* If fewer planes have been created for the page than expected for the colorant family, blank
* planes will be generated as required, or the job forced to monochrome in the case of a
* CMYK job with blank color planes, if this functionality has been activated.
*
* Finally, if the page is to be submitted to the PMS, the completed OIL page structure
* is used to create a PMS page, which is passed to PMS_CheckinPage(). If the page is
* not to be submitted to the PMS, then the page is deleted immediately as the PMS
* will not call the OIL function to indicate that the page has been output.
*/
void SubmitPageToPMS(void)
{
OIL_TyPage **ptLastPage;
#ifdef PMS_OIL_MERGE_DISABLE
PMS_TyPage *ptPMSPage;
#endif
int bSubmitPage = TRUE;
#ifndef PMS_OIL_MERGE_DISABLE_JS
gps_pageinfo_t pageinfo;
int GPSFramePrintretval;
int FP_force=GPS_PRINT_NORMAL;
int FP_frameid=1;
#endif
#ifdef DIRECTPRINTPCLOUT
PMS_TySystem ptPMSSysInfo;
#endif
g_pstCurrentJob->uPagesParsed++;
#ifdef DIRECTPRINTPCLOUT
PMS_GetSystemInfo(&ptPMSSysInfo , PMS_CurrentSettings);
if((ptPMSSysInfo.eOutputType == PMS_DIRECT_PRINT) || (ptPMSSysInfo.eOutputType == PMS_DIRECT_PRINTXL))
{
GGglobal_timing(SW_TRACE_OIL_CHECKIN, 0);
GGglobal_timing(SW_TRACE_OIL_PAGEDONE, 0);
return;
}
#endif
OIL_ProbeLog(SW_TRACE_OIL_SUBMITPAGETOPMS, SW_TRACETYPE_ENTER, (intptr_t)g_pstCurrentJob->uPagesParsed);
#ifdef USE_PJL
bSubmitPage = OIL_PjlShouldOutputPage(g_pstCurrentJob->uPagesParsed, g_pstCurrentJob);
#endif
#ifndef PMS_OIL_MERGE_DISABLE_JS
// memset(&pageinfo, 0, sizeof(pageinfo));
#endif
if (bSubmitPage)
{
if ((!g_pstCurrentPage) || (g_pstCurrentPage->nBlankPage == TRUE))
{
if (g_pstCurrentJob->bSuppressBlank == TRUE)
{
/* if blank pages are to be suppressed, then do not create the blank page. */
bSubmitPage = FALSE;
}
else
{
/* we have no CurrentPage - because this is a blank page */
GG_SHOW(GG_SHOW_OIL, "Blank page detected: create a blank page. \n ");
g_pstCurrentPage = CreateOILBlankPage(g_pstCurrentPage, NULL);
if(!g_pstCurrentPage)
{
/* There was some problem creating the blank page. Already would have been asserted */
return;
}
}
}
}
if (bSubmitPage)
{
g_pstCurrentPage->pstJob = g_pstCurrentJob;
/* attach the page at the tail of the page list of current job */
ptLastPage = &g_pstCurrentJob->pPage;
while(*ptLastPage != NULL)
{
ptLastPage = (OIL_TyPage **)&(*ptLastPage)->pNext;
}
*ptLastPage = g_pstCurrentPage;
g_pstCurrentJob->uPagesToPrint++;
g_pstCurrentJob->uPagesInOIL++;
#ifdef PMS_OIL_MERGE_DISABLE
/* create PMS page from the oil page */
ptPMSPage = CreatePMSPage(g_pstCurrentPage);
g_pstCurrentPage->ptPMSpage = ptPMSPage ;
#endif
GGglobal_timing(SW_TRACE_OIL_CHECKIN, g_pstCurrentJob->uPagesToPrint);
/* There is no data attached to the page structure when using the push band delivery
methods. Instead the checksum is computed in the SubmitBandToPMS function above. */
if(g_bPageChecksum &&
(g_ConfigurableFeatures.eBandDeliveryType != OIL_PUSH_BAND) &&
(g_ConfigurableFeatures.eBandDeliveryType != OIL_PUSH_BAND_DIRECT_SINGLE) &&
(g_ConfigurableFeatures.eBandDeliveryType != OIL_PUSH_BAND_DIRECT_FRAME)
)
{
uint8 *px;
uint32 uBand;
uint32 uColorant;
uint32 uPageChecksum = 0;
uint32 uBandSizeChecksum = 0;
/* Record start of checksum calculation */
OIL_ProbeLog(SW_TRACE_OIL_PAGECHECKSUM, SW_TRACETYPE_ENTER, (intptr_t)uPageChecksum);
for(uColorant = 0; uColorant < OIL_MAX_PLANES_COUNT; uColorant++)
{
#ifdef PMS_OIL_MERGE_DISABLE
if(ptPMSPage->atPlane[uColorant].ePlaneColorant != PMS_INVALID_COLOURANT)
{
for(uBand = 0; uBand < ptPMSPage->atPlane[uColorant].uBandTotal; uBand++)
{
for(px = (uint8 *)ptPMSPage->atPlane[uColorant].atBand[uBand].pBandRaster;
px < (uint8 *)(ptPMSPage->atPlane[uColorant].atBand[uBand].pBandRaster + ptPMSPage->atPlane[uColorant].atBand[uBand].cbBandSize);
px++)
{
uPageChecksum+=*px;
}
uBandSizeChecksum+=ptPMSPage->atPlane[uColorant].atBand[uBand].cbBandSize;
}
}
#else
if(g_pstCurrentPage->atPlane[uColorant].ePlaneColorant != OIL_InvalidColor)
{
for(uBand = 0; uBand < g_pstCurrentPage->atPlane[uColorant].uBandTotal; uBand++)
{
for(px = (uint8 *)g_pstCurrentPage->atPlane[uColorant].atBand[uBand].pBandRaster;
px < (uint8 *)(g_pstCurrentPage->atPlane[uColorant].atBand[uBand].pBandRaster + g_pstCurrentPage->atPlane[uColorant].atBand[uBand].cbBandSize);
px++)
{
uPageChecksum+=*px;
}
uBandSizeChecksum+=g_pstCurrentPage->atPlane[uColorant].atBand[uBand].cbBandSize;
}
}
#endif
}
GG_SHOW(GG_SHOW_CHECKSUM, "Raster checksum: %d, 0x%08X\n", g_pstCurrentJob->uPagesToPrint, uPageChecksum);
GG_SHOW(GG_SHOW_CHECKSUM, "Band size checksum: %d, 0x%08X\n", g_pstCurrentJob->uPagesToPrint, uBandSizeChecksum);
/* Record end of checksum calculation */
OIL_ProbeLog(SW_TRACE_OIL_PAGECHECKSUM, SW_TRACETYPE_EXIT, (intptr_t)uPageChecksum);
/* Record checksum value */
OIL_ProbeLog(SW_TRACE_OIL_PAGECHECKSUM, SW_TRACETYPE_MARK, (intptr_t)uPageChecksum);
}
/* checkin the page */
#ifdef PMS_OIL_MERGE_DISABLE
PMS_CheckinPage(ptPMSPage);
#else
#ifdef PMS_OIL_MERGE_DISABLE_JS
PMS_CheckinPage(g_pstCurrentPage);
#else
/*PMS_CheckinPage(ptPMSPage);*/
/***************************Call to gpsFramePrint***********************************/
GPSFramePrintretval = GPS_FramePrint(gps_client, FP_frameid, &pageinfo, FP_force);
if(!GPSFramePrintretval)
{
printf("GPS_FramePrint : Success\n");
}
else
{
printf("GPS_FramePrint : Failed\n");
}
#endif
#endif
/* ready to start the page */
GGglobal_timing(SW_TRACE_OIL_PAGESTART, 0);
}
else if (g_pstCurrentPage)
{
DeleteOILPage(g_pstCurrentPage);
g_pstCurrentPage = NULL;
}
OIL_ProbeLog(SW_TRACE_OIL_SUBMITPAGETOPMS, SW_TRACETYPE_EXIT, (intptr_t)g_pstCurrentJob->uPagesParsed);
}