extern uint32_t EFC_PerformCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument, uint32_t dwUseIAP )
{
if ( dwUseIAP != 0 )
{
/* Pointer on IAP function in ROM */
static uint32_t (*IAP_PerformCommand)( uint32_t, uint32_t ) ;
IAP_PerformCommand = (uint32_t (*)( uint32_t, uint32_t )) *((uint32_t*)CHIP_FLASH_IAP_ADDRESS ) ;
IAP_PerformCommand( 0, EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ) ;
return (efc->EEFC_FSR & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)) ;
}
else
{
uint32_t dwStatus ;
efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ;
do
{
dwStatus = efc->EEFC_FSR ;
}
while ( (dwStatus & EEFC_FSR_FRDY) != EEFC_FSR_FRDY ) ;
return ( dwStatus & (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE) ) ;
}
}
/**
* \brief Starts the executing the given command on the EEFC and returns as soon as the command is started.
*
* \note It does NOT set the FMCN field automatically.
* \param efc Pointer to a Efc instance
* \param command Command to execute.
* \param argument Command argument (should be 0 if not used).
*/
extern void EFC_StartCommand( Efc* efc, uint32_t dwCommand, uint32_t dwArgument )
{
/* Check command & argument */
switch ( dwCommand )
{
case EFC_FCMD_WP:
case EFC_FCMD_WPL:
case EFC_FCMD_EWP:
case EFC_FCMD_EWPL:
case EFC_FCMD_SLB:
case EFC_FCMD_CLB:
assert( dwArgument < IFLASH_NB_OF_PAGES ) ;
break ;
case EFC_FCMD_SFB:
case EFC_FCMD_CFB:
assert( dwArgument < 2 ) ;
break;
case EFC_FCMD_GETD:
case EFC_FCMD_EA:
case EFC_FCMD_GLB:
case EFC_FCMD_GFB:
case EFC_FCMD_STUI:
assert( dwArgument == 0 ) ;
break;
default: assert( 0 ) ;
}
/* Start command Embedded flash */
assert( (efc->EEFC_FSR & EEFC_FMR_FRDY) == EEFC_FMR_FRDY ) ;
efc->EEFC_FCR = EEFC_FCR_FKEY(0x5A) | EEFC_FCR_FARG(dwArgument) | EEFC_FCR_FCMD(dwCommand) ;
}
void banzai() {
// Disable all interrupts
__disable_irq();
// Set bootflag to run SAM-BA bootloader at restart
const int EEFC_FCMD_CGPB = 0x0C;
const int EEFC_KEY = 0x5A;
while (EFC0->EEFC_FSR & EEFC_FSR_FRDY == 0);
EFC0->EEFC_FCR =
EEFC_FCR_FCMD(EEFC_FCMD_CGPB) |
EEFC_FCR_FARG(1) |
EEFC_FCR_FKEY(EEFC_KEY);
while (EFC0->EEFC_FSR & EEFC_FSR_FRDY == 0);
// From here flash memory is no more available.
// Memory swap needs some time to stabilize
for (uint32_t i=0; i<1000000; i++)
// force compiler to not optimize this
__asm__ __volatile__("");
// BANZAIIIIIII!!!
const int RSTC_KEY = 0xA5;
RSTC->RSTC_CR =
RSTC_CR_KEY(RSTC_KEY) |
RSTC_CR_PROCRST |
RSTC_CR_PERRST;
while (true);
}
void banzai() {
// Disable all interrupts
__disable_irq();
// Set bootflag to run SAM-BA bootloader at restart
const int EEFC_FCMD_CGPB = 0x0C;
const int EEFC_KEY = 0x5A;
while ((EFC0->EEFC_FSR & EEFC_FSR_FRDY) == 0);
EFC0->EEFC_FCR =
EEFC_FCR_FCMD(EEFC_FCMD_CGPB) |
EEFC_FCR_FARG(1) |
EEFC_FCR_FKEY(EEFC_KEY);
while ((EFC0->EEFC_FSR & EEFC_FSR_FRDY) == 0);
// From here flash memory is no more available.
// BANZAIIIIIII!!!
const int RSTC_KEY = 0xA5;
RSTC->RSTC_CR =
RSTC_CR_KEY(RSTC_KEY) |
RSTC_CR_PROCRST |
RSTC_CR_PERRST;
while (true);
}
/**
* \brief Perform the given command and wait until its completion (or an error).
*
* \note Unique ID commands are not supported, use efc_read_unique_id.
*
* \param p_efc Pointer to an EFC instance.
* \param ul_command Command to perform.
* \param ul_argument Optional command argument.
*
* \note This function will automatically choose to use IAP function.
*
* \return 0 if successful, otherwise returns an error code.
*/
uint32_t efc_perform_command(Efc *p_efc, uint32_t ul_command,
uint32_t ul_argument)
{
// Unique ID commands are not supported.
if (ul_command == EFC_FCMD_STUI || ul_command == EFC_FCMD_SPUI) {
return EFC_RC_NOT_SUPPORT;
}
#if (SAM3XA_SERIES || SAM3U4)
// Use IAP function with 2 parameters in ROM.
static uint32_t(*iap_perform_command) (uint32_t, uint32_t);
uint32_t ul_efc_nb = (p_efc == EFC0) ? 0 : 1;
iap_perform_command =
(uint32_t(*)(uint32_t, uint32_t))
*((uint32_t *) CHIP_FLASH_IAP_ADDRESS);
iap_perform_command(ul_efc_nb,
EEFC_FCR_FKEY(FWP_KEY) | EEFC_FCR_FARG(ul_argument) |
EEFC_FCR_FCMD(ul_command));
return (p_efc->EEFC_FSR & EEFC_ERROR_FLAGS);
#elif (SAM3N_SERIES || SAM3S_SERIES || SAM4S_SERIES || SAM3U_SERIES)
// Use IAP function with 2 parameter in ROM.
static uint32_t(*iap_perform_command) (uint32_t, uint32_t);
iap_perform_command =
(uint32_t(*)(uint32_t, uint32_t))
*((uint32_t *) CHIP_FLASH_IAP_ADDRESS);
#if SAM4S_SERIES
uint32_t ul_efc_nb = (p_efc == EFC0) ? 0 : 1;
iap_perform_command(ul_efc_nb,
EEFC_FCR_FKEY_PASSWD | EEFC_FCR_FARG(ul_argument) |
EEFC_FCR_FCMD(ul_command));
#else
iap_perform_command(0,
EEFC_FCR_FKEY(FWP_KEY) | EEFC_FCR_FARG(ul_argument) |
EEFC_FCR_FCMD(ul_command));
#endif
return (p_efc->EEFC_FSR & EEFC_ERROR_FLAGS);
#else
// Use RAM Function.
return efc_perform_fcr(p_efc,
EEFC_FCR_FKEY(FWP_KEY) | EEFC_FCR_FARG(ul_argument) |
EEFC_FCR_FCMD(ul_command));
#endif
}
uint32_t efc_perform_read_sequence(Efc *p_efc,
uint32_t ul_cmd_st, uint32_t ul_cmd_sp,
uint32_t *p_ul_buf, uint32_t ul_size)
{
volatile uint32_t ul_status;
uint32_t ul_cnt;
#if (SAM3U4 || SAM3XA_SERIES /*|| SAM4SD16 || SAM4SD32*/)
uint32_t *p_ul_data =
(uint32_t *) ((p_efc == EFC0) ?
READ_BUFF_ADDR0 : READ_BUFF_ADDR1);
#elif (SAM3S_SERIES || SAM4S_SERIES || SAM3N_SERIES || SAM3U_SERIES)
uint32_t *p_ul_data = (uint32_t *) READ_BUFF_ADDR;
#else
return EFC_RC_NOT_SUPPORT;
#endif
if (p_ul_buf == NULL) {
return EFC_RC_INVALID;
}
p_efc->EEFC_FMR |= (0x1u << 16);
/* Send the Start Read command */
#if SAM4S_SERIES
p_efc->EEFC_FCR = EEFC_FCR_FKEY_PASSWD | EEFC_FCR_FARG(0)
| EEFC_FCR_FCMD(ul_cmd_st);
#else
p_efc->EEFC_FCR = EEFC_FCR_FKEY(FWP_KEY) | EEFC_FCR_FARG(0)
| EEFC_FCR_FCMD(ul_cmd_st);
#endif
/* Wait for the FRDY bit in the Flash Programming Status Register
* (EEFC_FSR) falls.
*/
do {
ul_status = p_efc->EEFC_FSR;
} while ((ul_status & EEFC_FSR_FRDY) == EEFC_FSR_FRDY);
/* The data is located in the first address of the Flash
* memory mapping.
*/
for (ul_cnt = 0; ul_cnt < ul_size; ul_cnt++) {
p_ul_buf[ul_cnt] = p_ul_data[ul_cnt];
}
/* To stop the read mode */
p_efc->EEFC_FCR =
#if SAM4S_SERIES
EEFC_FCR_FKEY_PASSWD | EEFC_FCR_FARG(0) |
EEFC_FCR_FCMD(ul_cmd_sp);
#else
EEFC_FCR_FKEY(FWP_KEY) | EEFC_FCR_FARG(0) |
EEFC_FCR_FCMD(ul_cmd_sp);
#endif
/* Wait for the FRDY bit in the Flash Programming Status Register (EEFC_FSR)
* rises.
*/
do {
ul_status = p_efc->EEFC_FSR;
} while ((ul_status & EEFC_FSR_FRDY) != EEFC_FSR_FRDY);
p_efc->EEFC_FMR &= ~(0x1u << 16);
return EFC_RC_OK;
}