void setup_ethernet(void) {
int error;
_enet_handle ehandle; /* for Ethernet driver */
_rtcs_if_handle ihandle;
_enet_address address;
error = RTCS_create();
if (error) {
err_sys("failed to create RTCS");
}
ENET_get_mac_address(BSP_DEFAULT_ENET_DEVICE, ENET_IPADDR, address);
/* Set up the Ethernet driver */
error = ENET_initialize(BSP_DEFAULT_ENET_DEVICE, address, 0, &ehandle);
if (error)
err_sys("failed to initialize Ethernet driver");
error = RTCS_if_add(ehandle, RTCS_IF_ENET, &ihandle);
if (error)
err_sys("failed to add interface for Ethernet");
error = RTCS_if_bind(ihandle, ENET_IPADDR, ENET_IPMASK);
if (error)
err_sys("failed to bind interface for Ethernet");
#ifdef GATE_IPADDR
RTCS_gate_add(GATE_IPADDR, INADDR_ANY, INADDR_ANY);
#endif
printf("Ethernet device %d bound to %X\n", BSP_DEFAULT_ENET_DEVICE,
ENET_IPADDR);
}
void Main_task(uint_32 temp)
{
uint_32 error;
MQX_FILE_PTR flash_hdl;
_enet_address enet_address;
/* Sets the address of the MQX exit handler, which MQX calls when it exits */
_mqx_set_exit_handler(_bootloader_exit);
error = RTCS_create();
if (error != RTCS_OK)
{
printf("\nRTCS failed to initialize, error = %X", error);
_task_block();
}
/* Enable IP forwarding */
_IP_forward = TRUE;
#ifdef ENET_DEVICE
ENET_get_mac_address (ENET_DEVICE, ENET_IPADDR, enet_address);
#endif
printf("\nMQX version %s",_mqx_version);
printf("\nBoot loader application (build: %s)", __DATE__);
printf("\n");
/* Open the flash device */
flash_hdl = fopen(FLASH_NAME_INIT, NULL);
if (flash_hdl == NULL) {
printf("\nUnable to open flash device");
_task_block();
}
/* Initialize Image Table if not exist image */
if (BOOTLOADER_OK == _bootloader_init_table(flash_hdl))
{
Auto_boot_startup(flash_hdl);
}
fclose(flash_hdl);
printf("\n");
/* Run the shell */
Shell(Shell_commands, NULL);
for(;;)
{
printf("Shell exited, restarting...\n");
Shell(Shell_commands, NULL);
}
}
void SEC_InitializeNetworking(uint_32 pcbs, uint_32 msgs, uint_32 sockets, boolean dhcp)
{
int_32 error;
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
/* runtime RTCS configuration */
_RTCSPCB_init = pcbs;
_RTCS_msgpool_init = msgs;
_RTCS_socket_part_init = sockets;
error = RTCS_create();
if (error == RTCS_OK) {
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_IPGATEWAY;
ENET_get_mac_address(BSP_DEFAULT_ENET_DEVICE, ENET_IPADDR, enet_address);
ipcfg_init_device(BSP_DEFAULT_ENET_DEVICE, enet_address);
ipcfg_add_dns_ip(BSP_DEFAULT_ENET_DEVICE,LWDNS_server_ipaddr);
// check link status
printf("\nWaiting for ethernet cable plug in ... ");
while(!ipcfg_get_link_active(BSP_DEFAULT_ENET_DEVICE)) {};
printf("Cable connected\n");
/* If DHCP Enabled, get IP address from DHCP server */
if (dhcp) {
printf("\nDHCP bind ... ");
error = ipcfg_bind_dhcp_wait(BSP_DEFAULT_ENET_DEVICE, 1, &ip_data);
if (error != IPCFG_ERROR_OK) {
printf("Error %08x!\n", error);
}
else {
printf("Successful!\n");
}
} else {
/* Else bind with static IP */
printf ("\nStatic IP bind ... ");
error = ipcfg_bind_staticip(BSP_DEFAULT_ENET_DEVICE, &ip_data);
if (error != IPCFG_ERROR_OK) {
printf("Error %08x!\n",error);
}
else {
printf("Successful!\n");
}
}
if (error == IPCFG_ERROR_OK) {
ipcfg_get_ip(BSP_DEFAULT_ENET_DEVICE, &ip_data);
printf("\nIP Address : %d.%d.%d.%d\n",IPBYTES(ip_data.ip));
printf("\nSubnet Address : %d.%d.%d.%d\n",IPBYTES(ip_data.mask));
printf("\nGateway Address : %d.%d.%d.%d\n",IPBYTES(ip_data.gateway));
printf("\nDNS Address : %d.%d.%d.%d\n",IPBYTES(ipcfg_get_dns_ip(BSP_DEFAULT_ENET_DEVICE,0)));
}
} else {
printf("\nRTCS_Create failed !\n");
_task_block();
}
}
boolean init_network()
{
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
uint_32 error;
_RTCS_socket_part_init = RTCS_NUMBER_OF_SOCKETS;
_RTCS_socket_part_grow = 2;
_RTCS_socket_part_max = 20;
error = RTCS_create();
if (error != RTCS_OK)
{
printf("init_network: RTCS failed to initialize, error = %X", error);
_task_block();
}
_IP_forward = TRUE;
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
// we dont need the gateway adress for the netgear-switch
//ip_data.gateway = ENET_GATEWAY;
// calculate the mac-adress
ENET_get_mac_address (ENET_DEVICE, ENET_IPADDR, enet_address);
// initialize the device
error = ipcfg_init_device (ENET_DEVICE, enet_address);
if (error != RTCS_OK)
{
printf("\nFailed to initialize ethernet device, error = %X", error);
_task_block();
}
#if RTCSCFG_ENABLE_LWDNS
LWDNS_server_ipaddr = ENET_GATEWAY;
ipcfg_add_dns_ip(ENET_DEVICE,LWDNS_server_ipaddr);
#endif /* RTCSCFG_ENABLE_LWDNS */
printf("Setting static IP address ... ");
error = ipcfg_bind_staticip (ENET_DEVICE, &ip_data);
if (error != IPCFG_ERROR_OK)
{
printf("\nRTCS failed to bind interface with IPv4, error = %X", error);
_task_block();
}
else
printf("OK\n");
ipcfg_get_ip(ENET_DEVICE, &ip_data);
printf("IP Address : %d.%d.%d.%d\n",IPBYTES(ip_data.ip));
printf("Subnet Address : %d.%d.%d.%d\n",IPBYTES(ip_data.mask));
printf("Gateway Address : %d.%d.%d.%d\n",IPBYTES(ip_data.gateway));
printf("DNS Address : %d.%d.%d.%d\n",IPBYTES(ipcfg_get_dns_ip(ENET_DEVICE,0)));
printf("MAC Address : %02x:%02x:%02x:%02x:%02x:%02x\n",
enet_address[0], enet_address[1], enet_address[2],
enet_address[3], enet_address[4], enet_address[5]);
return TRUE;
}
void HVAC_initialize_networking(void)
{
int_32 error;
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
#if DEMOCFG_USE_POOLS && defined(DEMOCFG_RTCS_POOL_ADDR) && defined(DEMOCFG_RTCS_POOL_SIZE)
/* use external RAM for RTCS buffers */
_RTCS_mem_pool = _mem_create_pool((pointer)DEMOCFG_RTCS_POOL_ADDR, DEMOCFG_RTCS_POOL_SIZE);
#endif
#if RTCS_MINIMUM_FOOTPRINT
/* runtime RTCS configuration for devices with small RAM, for others the default BSP setting is used */
_RTCSPCB_init = 4;
_RTCSPCB_grow = 2;
_RTCSPCB_max = 20;
_RTCS_msgpool_init = 4;
_RTCS_msgpool_grow = 2;
_RTCS_msgpool_max = 20;
_RTCS_socket_part_init = 4;
_RTCS_socket_part_grow = 2;
_RTCS_socket_part_max = 20;
#endif
error = RTCS_create();
LWDNS_server_ipaddr = ENET_IPGATEWAY;
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_IPGATEWAY;
ENET_get_mac_address (DEMOCFG_DEFAULT_DEVICE, ENET_IPADDR, enet_address);
error = ipcfg_init_device (DEMOCFG_DEFAULT_DEVICE, enet_address);
#if DEMOCFG_USE_WIFI
iwcfg_set_essid (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_SSID);
if ((strcmp(DEMOCFG_SECURITY,"wpa") == 0)||strcmp(DEMOCFG_SECURITY,"wpa2") == 0)
{
iwcfg_set_passphrase (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_PASSPHRASE);
}
if (strcmp(DEMOCFG_SECURITY,"wep") == 0)
{
iwcfg_set_wep_key (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_WEP_KEY,strlen(DEMOCFG_WEP_KEY),DEMOCFG_WEP_KEY_INDEX);
}
iwcfg_set_sec_type (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_SECURITY);
iwcfg_set_mode (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_NW_MODE);
#endif
error = ipcfg_bind_staticip (DEMOCFG_DEFAULT_DEVICE, &ip_data);
#if DEMOCFG_ENABLE_FTP_SERVER
FTPd_init("FTP_server", 7, 3000 );
#endif
#if DEMOCFG_ENABLE_TELNET_SERVER
TELNETSRV_init("Telnet_server", 7, 2000, (RTCS_TASK_PTR) &Telnetd_shell_template );
#endif
#if DEMOCFG_ENABLE_KLOG && MQX_KERNEL_LOGGING
RTCSLOG_enable(RTCSLOG_TYPE_FNENTRY);
RTCSLOG_enable(RTCSLOG_TYPE_PCB);
#endif
}
/*TASK*-----------------------------------------------------------------
*
* Function Name : main_task
* Returned Value : void
* Comments :
*
*END------------------------------------------------------------------*/
void main_task(uint_32 temp) {
int_32 error;
HTTPD_STRUCT *server[BSP_ENET_DEVICE_COUNT];
extern const HTTPD_CGI_LINK_STRUCT cgi_lnk_tbl[];
extern const TFS_DIR_ENTRY tfs_data[];
HTTPD_PARAMS_STRUCT *params[BSP_ENET_DEVICE_COUNT];
_enet_address address[BSP_ENET_DEVICE_COUNT];
uint_32 phy_addr[BSP_ENET_DEVICE_COUNT];
uint_32 ip_addr[BSP_ENET_DEVICE_COUNT];
uint_32 i = 0;
char* indexes[BSP_ENET_DEVICE_COUNT];
uint_8 n_devices = BSP_ENET_DEVICE_COUNT;
#if DEMOCFG_USE_WIFI
ENET_ESSID ssid;
uint_32 mode;// = DEMOCFG_NW_MODE;
uint_32 sectype;// = DEMOCFG_SECURITY;
ENET_MEDIACTL_PARAM param;
#endif
#if RTCSCFG_ENABLE_IP6
IPCFG6_GET_ADDR_DATA data[RTCSCFG_IP6_IF_ADDRESSES_MAX];
char prn_addr6[sizeof "ffff:ffff:ffff:ffff:ffff:ffff:255.255.255.255"];
uint_32 n = 0;
uint_32 j = 0;
#endif
_int_install_unexpected_isr();
/*---------------- Initialize devices and variables ----------------------*/
_RTCSPCB_init = 4;
_RTCSPCB_grow = 2;
_RTCSPCB_max = 8;
_RTCSTASK_stacksize = 4500;
/*--------------------------- Init end -----------------------------------*/
PORT_PCR_REG(PORTC_BASE_PTR, 3) = PORT_PCR_MUX(5);
// SIM_SOPT2 |= 3<<5; // 1k LPO
error = RTCS_create();
if (error != RTCS_OK)
{
printf("RTCS failed to initialize, error = 0x%X\n", error);
_task_block();
}
_IP_forward = TRUE;
for (i = 0; (i < n_devices) && (n_devices != 0); i++)
{
IPCFG_IP_ADDRESS_DATA ip_data;
phy_addr[i] = i;
ip_addr[i] = IPADDR(A,B,C+i,D);
ENET_get_mac_address (phy_addr[i], ip_addr[i], address[i]);
/* Init ENET device */
error = ipcfg_init_device (phy_addr[i], address[i]);
if (error != RTCS_OK)
{
printf("IPCFG: Device n.%d init failed. Error = 0x%X\n", i, error);
_task_set_error(MQX_OK);
n_devices--;
i--;
continue;
}
#if RTCSCFG_ENABLE_IP4
ip_data.ip = ip_addr[i];
ip_data.mask = ENET_IPMASK;
ip_data.gateway = 0;
/* Bind IPv4 address */
//error = ipcfg_bind_staticip (phy_addr[i], &ip_data);
error = ipcfg_bind_autoip (phy_addr[i], &ip_data);
if (error != RTCS_OK)
{
printf("\nIPCFG: Failed to bind IP address. Error = 0x%X", error);
_task_block();
}
#endif /* RTCSCFG_ENABLE_IP4 */
indexes[i] = (char*) _mem_alloc(sizeof("\\index_x.html"));
}
error = _io_tfs_install("tfs:", tfs_data);
#if DEBUG__MESSAGES
printf("Preparing http servers...\n");
#endif
for (i = 0; i < n_devices; i++)
{
params[i] = httpd_default_params(NULL);
params[i]->af = HTTP_INET_AF; //IPv4+IPv6, set connection family from config.h
#if RTCSCFG_ENABLE_IP6
params[i]->if_scope_id = HTTP_SCOPE_ID; // set interface number here. 0 is any .
#endif
if (params[i])
{
sprintf(indexes[i], "\\index.html", i);
params[i]->root_dir = (HTTPD_ROOT_DIR_STRUCT*)root_dir;
params[i]->index_page = indexes[i];
printf("Starting http server No.%d on IP", i);
/*
** If there is only one interface listen on any IP address
** so address can change in runtime (DHCP etc.)
*/
#if RTCSCFG_ENABLE_IP4
if ((i == 0) && (n_devices == 1))
{
params[i]->address = INADDR_ANY;
}
else
{
params[i]->address = ip_addr[i];
}
/* Print active ip addresses */
printf(" %d.%d.%d.%d", IPBYTES(ip_addr[i]));
#endif
#if RTCSCFG_ENABLE_IP6
while(!ipcfg6_get_addr_info_n(i, n, &data[n]))
{
n++;
}
while(j < n)
{
if(inet_ntop(AF_INET6, &data[j++].ip_addr, prn_addr6, sizeof(prn_addr6)))
{
/* Print active ip addresses */
#if RTCSCFG_ENABLE_IP4
printf("%s %s", (HTTP_INET_AF & AF_INET) ? " and" : "", prn_addr6);
#else
printf(" %s", prn_addr6);
#endif
}
}
#endif
#if PSP_MQX_CPU_IS_MCF5223X
params[i]->max_ses = 1;
#else
params[i]->max_ses = _RTCS_socket_part_max - 1;
#endif
server[i] = httpd_init(params[i]);
}
HTTPD_SET_PARAM_CGI_TBL(server[i], (HTTPD_CGI_LINK_STRUCT*)cgi_lnk_tbl);
#if HTTPD_SEPARATE_TASK || !HTTPDCFG_POLL_MODE
printf("...");
error = httpd_server_run(server[i]);
if (error)
{
printf("[FAIL]\n");
}
else
{
printf("[OK]\n");
}
#endif
}
/* user stuff come here */
#if HTTPD_SEPARATE_TASK || !HTTPDCFG_POLL_MODE
_task_create(0, SHELL_TASK, 0);
_task_block();
#else
printf("Servers polling started.\n")
while (1)
{
for (i = 0; i < n_devices; i++)
{
httpd_server_poll(server[i], 1);
}
/* user stuff come here - only non blocking calls */
}
#endif
}
void SEC_InitializeNetworking(uint_32 pcbs, uint_32 msgs, uint_32 sockets, boolean dhcp)
{
int_32 error;
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
#if PSP_MQX_CPU_IS_MCF51CN
_enet_handle ehandle;
_rtcs_if_handle ihandle;
#endif
/* runtime RTCS configuration */
_RTCSPCB_init = pcbs;
_RTCS_msgpool_init = msgs;
_RTCS_socket_part_init = sockets;
error = RTCS_create();
if (error == RTCS_OK) {
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_IPGATEWAY;
#if RTCSCFG_ENABLE_LWDNS
LWDNS_server_ipaddr = ENET_IPDNS;
#endif
ENET_get_mac_address(BSP_DEFAULT_ENET_DEVICE, ENET_IPADDR, enet_address);
#if PSP_MQX_CPU_IS_MCF51CN
ENET_initialize_ex(&ENET_param, BSP_DEFAULT_ENET_DEVICE, &ehandle);
if (RTCS_if_add(ehandle, RTCS_IF_ENET, &ihandle) == 0) {
if (ipcfg_init_interface(-1, ihandle) != 0) {
RTCS_if_remove(ihandle);
ENET_shutdown(ehandle);
_task_block();
}
}
else {
ENET_shutdown(ehandle);
}
#else
ipcfg_init_device(BSP_DEFAULT_ENET_DEVICE, enet_address);
#endif
ipcfg_add_dns_ip(BSP_DEFAULT_ENET_DEVICE,LWDNS_server_ipaddr);
// check link status
printf("\nWaiting for ethernet cable plug in ... ");
while(!ipcfg_get_link_active(BSP_DEFAULT_ENET_DEVICE)) {};
printf("Cable connected\n");
/* If DHCP Enabled, get IP address from DHCP server */
if (dhcp) {
printf("\nDHCP bind ... ");
error = ipcfg_bind_dhcp_wait(BSP_DEFAULT_ENET_DEVICE, 1, &ip_data);
if (error != IPCFG_ERROR_OK) {
printf("Error %08x!\n", error);
}
else {
printf("Successful!\n");
}
} else {
/* Else bind with static IP */
printf ("\nStatic IP bind ... ");
error = ipcfg_bind_staticip(BSP_DEFAULT_ENET_DEVICE, &ip_data);
if (error != IPCFG_ERROR_OK) {
printf("Error %08x!\n",error);
}
else {
printf("Successful!\n");
}
}
if (error == IPCFG_ERROR_OK) {
ipcfg_get_ip(BSP_DEFAULT_ENET_DEVICE, &ip_data);
printf("\nIP Address : %d.%d.%d.%d\n",IPBYTES(ip_data.ip));
printf("\nSubnet Address : %d.%d.%d.%d\n",IPBYTES(ip_data.mask));
printf("\nGateway Address : %d.%d.%d.%d\n",IPBYTES(ip_data.gateway));
printf("\nDNS Address : %d.%d.%d.%d\n",IPBYTES(ipcfg_get_dns_ip(BSP_DEFAULT_ENET_DEVICE,0)));
}
} else {
printf("\nRTCS_Create failed !\n");
_task_block();
}
SEC_GetTime();
}
void Main_task(uint32_t temp)
{
#include <ipcfg.h>
IPCFG_IP_ADDRESS_DATA ip_data;
_rtcs_if_handle ihandle;
uint32_t error;
_ip_address new_target;
_enet_address enet_address;
/* runtime RTCS configuration */
_RTCSPCB_init = 4;
_RTCSPCB_grow = 2;
_RTCSPCB_max = 6;
_RTCS_socket_part_init = 4;
_RTCS_socket_part_grow = 2;
_RTCS_socket_part_max = 6;
error = RTCS_create();
if (error) {
printf("\nFailed to initialize RTCS, error = %X", error);
_task_block();
} /* Endif */
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_IPGATEWAY;
ENET_get_mac_address (BSP_DEFAULT_ENET_DEVICE, ENET_IPADDR, enet_address);
error = ipcfg_init_device (BSP_DEFAULT_ENET_DEVICE, enet_address);
error = ipcfg_bind_staticip (BSP_DEFAULT_ENET_DEVICE, &ip_data);
ihandle = ipcfg_get_ihandle( BSP_DEFAULT_ENET_DEVICE );
/*
** Install some MIBs for the SNMP agent
** MIB1213_init must be called before SNMP_init functions
** It should not be removed.
** If application wishes to use MQX RTOS, MIBMQX_init must be called
** before SNMP_init functions.
*/
MIB1213_init();
/* init MQX MIB */
#if 0
/* It conflicts with the sample MIB and should only be reinstated when
* "your_company" is changed to a more appropriate identifier.
* You can find it in the snmp_demo.def file. */
MIBMQX_init();
#endif
/* demo MIB table init */
MIBdemo_init();
/*
** Initialize the agent.
** There are two functions for initializing SNMP agent.
** If application wants to send ColdStart/WarmStart traps at
** the initialization time, it must call:
** SNMP_init_with_traps(agent task name, agent task priority,
** agent task stack size, list of trap receivers);
**
** Calling this function will initialize SNMP agent and send
** ColdStart/WarmStart (depending on system up time) traps to the
** station(s).
**
** If application does not want to send ColdStart/WarmStart traps at
** the initialization time, it must call:
** SNMP_init(agent task name, agent task priority,
** agent task stack size);
**
** Note1: If application wishes to use SNMP_init() to initialize the
** SNMP agent, there is no IP address for trap to be sent.
** Application must add trap receivers to the list by calling
** RTCS_trap_target_add(_ip_address). To remove receiver from
** trap receivers list call RTCS_trap_target_remove(_ip_address).
**
** This function initializes SNMP agent without sending any traps.
**
** This example will use SNMP_init_with_traps.
*/
//error = SNMP_init("SNMP", 7, 3000);
error = SNMP_init_with_traps("SNMP", 7, 2500, my_trap_list);
if (error) {
printf("\nFailed to initialize SNMP agent, error = %X", error);
_task_block();
} /* Endif */
printf("Demo started, wait... \n\r");
/*
** RTCS/SNMP agent now supports private and public communities.
** User can add community to the community list, that is defined
** in snmpcfg.h by adding community string to the SNMPCFG_COMMUNITY_LIST
** and changing the SNMPCFG_NUM_COMMUNITY respectively.
**
** Note1: Communities cannot be added dynamically.
** Note2: RTCS/SNMP agent will respond to get, set and getnext messages
** to communities defined in SNMPCFG_COMMUNITY_LIST.
**
** Application can select communities for send and receive traps by calling
** SNMP_trap_select_community(community name); Where community name should
** match one of the strings in the SNMPCFG_COMMUNITY_LIST. By default
** current community is set to first string in SNMPCFG_COMMUNITY_LIST[].
** This function returns TRUE if the community was changed successfully,
** FALSE on failure.
**
** Note3: SNMP_trap_select_community(char *community_name); should be
** called after SNMP_init (or with trap) has been called.
**
** Note4: mylinkdown trap is enterprise specific, therefore application
** need to implement this trap. SNMP_trap_myLinkDown is just an example
** for use as reference.
*/
/* Send some traps to private and public communities */
/* trap will be sent to four IPs in my_trap_list */
if(SNMP_trap_select_community("private"))
{
SNMP_trap_linkDown(ihandle);
SNMP_trap_linkUp(ihandle);
SNMP_trap_myLinkDown(ihandle);
SNMP_trap_coldStart();
SNMP_trap_warmStart();
}
new_target = ENET_TRAP_ADDR5;
/* Add a new IP address to the trap list */
error = RTCS_trap_target_add(new_target);
if (error) {
printf("\nFailed to add target trap, error = %X", error);
} /* Endif */
/* trap will be sent to five IPs */
if(SNMP_trap_select_community("public"))
{
SNMP_trap_linkDown(ihandle);
SNMP_trap_linkUp(ihandle);
SNMP_trap_myLinkDown(ihandle);
SNMP_trap_coldStart();
SNMP_trap_warmStart();
}
/* Remove the new IP address from trap list */
error = RTCS_trap_target_remove(new_target);
if (error) {
printf("\nFailed to remove target trap, error = %X", error);
} /* Endif */
#ifdef SNMPCFG_SEND_V2_TRAPS
if (SNMP_trap_select_community("public"))
{
SNMPv2_trap_linkDown(ihandle);
SNMPv2_trap_linkUp(ihandle);
SNMPv2_trap_coldStart();
SNMPv2_trap_warmStart();
}
#endif
/* Call the counter demo function */
Snmp_task(0);
_task_block();
}
void HVAC_initialize_networking(void)
{
int32_t error;
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
#if DEMOCFG_USE_POOLS && defined(DEMOCFG_RTCS_POOL_ADDR) && defined(DEMOCFG_RTCS_POOL_SIZE)
/* use external RAM for RTCS buffers */
_RTCS_mem_pool = _mem_create_pool((void *)DEMOCFG_RTCS_POOL_ADDR, DEMOCFG_RTCS_POOL_SIZE);
#endif
/* runtime RTCS configuration for devices with small RAM, for others the default BSP setting is used */
_RTCSPCB_init = 4;
_RTCSPCB_grow = 2;
_RTCSPCB_max = 20;
_RTCS_msgpool_init = 4;
_RTCS_msgpool_grow = 2;
_RTCS_msgpool_max = 20;
_RTCS_socket_part_init = 4;
_RTCS_socket_part_grow = 2;
_RTCS_socket_part_max = 20;
error = RTCS_create();
LWDNS_server_ipaddr = ENET_IPGATEWAY;
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_IPGATEWAY;
ENET_get_mac_address (DEMOCFG_DEFAULT_DEVICE, ENET_IPADDR, enet_address);
error = ipcfg_init_device (DEMOCFG_DEFAULT_DEVICE, enet_address);
#if DEMOCFG_USE_WIFI
iwcfg_set_essid (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_SSID);
if ((strcmp(DEMOCFG_SECURITY,"wpa") == 0)||strcmp(DEMOCFG_SECURITY,"wpa2") == 0)
{
iwcfg_set_passphrase (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_PASSPHRASE);
}
if (strcmp(DEMOCFG_SECURITY,"wep") == 0)
{
iwcfg_set_wep_key (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_WEP_KEY,strlen(DEMOCFG_WEP_KEY),DEMOCFG_WEP_KEY_INDEX);
}
iwcfg_set_sec_type (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_SECURITY);
iwcfg_set_mode (DEMOCFG_DEFAULT_DEVICE,DEMOCFG_NW_MODE);
#endif
error = ipcfg_bind_staticip (DEMOCFG_DEFAULT_DEVICE, &ip_data);
#if DEMOCFG_ENABLE_FTP_SERVER
{
/* FTP server parameters are global variables. */
ftpsrv_params.root_dir = FTPSRV_ROOTDIR;
#if RTCSCFG_ENABLE_IP4
ftpsrv_params.af |= AF_INET;
#endif
#if RTCSCFG_ENABLE_IP6
ftpsrv_params.af |= AF_INET6;
#endif
ftpsrv_params.auth_table = (FTPSRV_AUTH_STRUCT*) ftpsrv_users;
if (FTPSRV_init(&ftpsrv_params) != 0)
{
printf("FTP Server Started. Root directory is set to \"%s\", login: \"%s\", password: \"%s\".\n",
ftpsrv_params.root_dir,
ftpsrv_users[0].uid,
ftpsrv_users[0].pass);
}
}
#endif
#if DEMOCFG_ENABLE_TELNET_SERVER
TELNETSRV_init("Telnet_server", 7, 2000, (RTCS_TASK_PTR) &Telnetd_shell_template );
#endif
#if DEMOCFG_ENABLE_KLOG && MQX_KERNEL_LOGGING
RTCSLOG_enable(RTCSLOG_TYPE_FNENTRY);
RTCSLOG_enable(RTCSLOG_TYPE_PCB);
#endif
}
void rtcs_init()
{
IPCFG_IP_ADDRESS_DATA ip_data;
_enet_address enet_address;
uint_32 error = RTCS_create();
if (error != RTCS_OK)
{
printf("\nRTCS failed to initialize, error = %X", error);
_task_block();
}
_IP_forward = TRUE;
#ifdef BSP_ENET_DEVICE_COUNT
#if (BSP_ENET_DEVICE_COUNT > 0)
/*Following section is relevant only in case there as some enet driver available in BSP (FEC, MACNET, WIFI or other enet driver)*/
ip_data.ip = ENET_IPADDR;
ip_data.mask = ENET_IPMASK;
ip_data.gateway = ENET_GATEWAY;
/* calcualte unique mac address from IP ADDRES */
ENET_get_mac_address (ENET_DEVICE, ENET_IPADDR, enet_address);
error = ipcfg_init_device (ENET_DEVICE, enet_address);
if (error != RTCS_OK)
{
printf("\nFailed to initialize ethernet device, error = %X", error);
_task_block();
}
#if RTCSCFG_ENABLE_LWDNS
LWDNS_server_ipaddr = ENET_GATEWAY;
ipcfg_add_dns_ip(ENET_DEVICE,LWDNS_server_ipaddr);
#endif /* RTCSCFG_ENABLE_LWDNS */
printf("\nWaiting for ethernet cable plug in ... ");
while(!ipcfg_get_link_active(ENET_DEVICE)) {};
printf("Cable connected\n");
#if RTCS_DHCP
printf("Contacting DHCP server ... ");
error = ipcfg_bind_dhcp_wait(ENET_DEVICE, FALSE, &ip_data);
#else
printf("Setting static IP address ... ");
error = ipcfg_bind_staticip (ENET_DEVICE, &ip_data);
#endif /* RTCS_DHCP */
if (error != IPCFG_ERROR_OK)
{
printf("\nRTCS failed to bind interface with IPv4, error = %X", error);
_task_block();
}
else
{
printf("OK\n");
}
ipcfg_get_ip(ENET_DEVICE, &ip_data);
printf("\nIP Address : %d.%d.%d.%d\n",IPBYTES(ip_data.ip));
printf("\nSubnet Address : %d.%d.%d.%d\n",IPBYTES(ip_data.mask));
printf("\nGateway Address : %d.%d.%d.%d\n",IPBYTES(ip_data.gateway));
printf("\nDNS Address : %d.%d.%d.%d\n",IPBYTES(ipcfg_get_dns_ip(ENET_DEVICE,0)));
#endif /* BSP_ENET_DEVICE_COUNT > 0 */
#endif /* BSP_ENET_DEVICE_COUNT */
#if RTCS_PPP
PPP_start();
#endif /* RTCS_PPP */
/* TODO: start server(s) in separate tasks */
}