void init() {
const uart_config_t uart_config = {
.baud_rate = 115200,
.data_bits = UART_DATA_8_BITS,
.parity = UART_PARITY_DISABLE,
.stop_bits = UART_STOP_BITS_1,
.flow_ctrl = UART_HW_FLOWCTRL_DISABLE
};
uart_param_config(UART_NUM_1, &uart_config);
uart_set_pin(UART_NUM_1, TXD_PIN, RXD_PIN, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
// We won't use a buffer for sending data.
uart_driver_install(UART_NUM_1, RX_BUF_SIZE * 2, 0, 0, NULL, 0);
}
int sendData(const char* logName, const char* data)
{
const int len = strlen(data);
const int txBytes = uart_write_bytes(UART_NUM_1, data, len);
ESP_LOGI(logName, "Wrote %d bytes", txBytes);
return txBytes;
}
static void tx_task()
{
static const char *TX_TASK_TAG = "TX_TASK";
esp_log_level_set(TX_TASK_TAG, ESP_LOG_INFO);
while (1) {
sendData(TX_TASK_TAG, "Hello world");
vTaskDelay(2000 / portTICK_PERIOD_MS);
}
}
static void rx_task()
{
static const char *RX_TASK_TAG = "RX_TASK";
esp_log_level_set(RX_TASK_TAG, ESP_LOG_INFO);
uint8_t* data = (uint8_t*) malloc(RX_BUF_SIZE+1);
while (1) {
const int rxBytes = uart_read_bytes(UART_NUM_1, data, RX_BUF_SIZE, 1000 / portTICK_RATE_MS);
if (rxBytes > 0) {
data[rxBytes] = 0;
ESP_LOGI(RX_TASK_TAG, "Read %d bytes: '%s'", rxBytes, data);
ESP_LOG_BUFFER_HEXDUMP(RX_TASK_TAG, data, rxBytes, ESP_LOG_INFO);
}
}
free(data);
}
void app_main()
{
init();
xTaskCreate(rx_task, "uart_rx_task", 1024*2, NULL, configMAX_PRIORITIES, NULL);
xTaskCreate(tx_task, "uart_tx_task", 1024*2, NULL, configMAX_PRIORITIES-1, NULL);
}
/*
* HAL callback function as prescribed by the U8G2 library. This callback is invoked
* to handle I2C communications.
*/
uint8_t u8g2_esp32_i2c_byte_cb(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr) {
ESP_LOGD(TAG, "i2c_cb: Received a msg: %d, arg_int: %d, arg_ptr: %p", msg, arg_int, arg_ptr);
switch(msg) {
case U8X8_MSG_BYTE_SET_DC: {
if (u8g2_esp32_hal.dc != U8G2_ESP32_HAL_UNDEFINED) {
gpio_set_level(u8g2_esp32_hal.dc, arg_int);
}
break;
}
case U8X8_MSG_BYTE_INIT: {
if (u8g2_esp32_hal.sda == U8G2_ESP32_HAL_UNDEFINED ||
u8g2_esp32_hal.scl == U8G2_ESP32_HAL_UNDEFINED) {
break;
}
i2c_config_t conf;
conf.mode = I2C_MODE_MASTER;
ESP_LOGI(TAG, "sda_io_num %d", u8g2_esp32_hal.sda);
conf.sda_io_num = u8g2_esp32_hal.sda;
conf.sda_pullup_en = GPIO_PULLUP_ENABLE;
ESP_LOGI(TAG, "scl_io_num %d", u8g2_esp32_hal.scl);
conf.scl_io_num = u8g2_esp32_hal.scl;
conf.scl_pullup_en = GPIO_PULLUP_ENABLE;
ESP_LOGI(TAG, "clk_speed %d", I2C_MASTER_FREQ_HZ);
conf.master.clk_speed = I2C_MASTER_FREQ_HZ;
ESP_LOGI(TAG, "i2c_param_config %d", conf.mode);
ESP_ERROR_CHECK(i2c_param_config(I2C_MASTER_NUM, &conf));
ESP_LOGI(TAG, "i2c_driver_install %d", I2C_MASTER_NUM);
ESP_ERROR_CHECK(i2c_driver_install(I2C_MASTER_NUM, conf.mode, I2C_MASTER_RX_BUF_DISABLE, I2C_MASTER_TX_BUF_DISABLE, 0));
break;
}
case U8X8_MSG_BYTE_SEND: {
uint8_t* data_ptr = (uint8_t*)arg_ptr;
ESP_LOG_BUFFER_HEXDUMP(TAG, data_ptr, arg_int, ESP_LOG_VERBOSE);
while( arg_int > 0 ) {
ESP_ERROR_CHECK(i2c_master_write_byte(handle_i2c, *data_ptr, ACK_CHECK_EN));
data_ptr++;
arg_int--;
}
break;
}
case U8X8_MSG_BYTE_START_TRANSFER: {
uint8_t i2c_address = u8x8_GetI2CAddress(u8x8);
handle_i2c = i2c_cmd_link_create();
ESP_LOGD(TAG, "Start I2C transfer to %02X.", i2c_address>>1);
ESP_ERROR_CHECK(i2c_master_start(handle_i2c));
ESP_ERROR_CHECK(i2c_master_write_byte(handle_i2c, i2c_address | I2C_MASTER_WRITE, ACK_CHECK_EN));
break;
}
case U8X8_MSG_BYTE_END_TRANSFER: {
ESP_LOGD(TAG, "End I2C transfer.");
ESP_ERROR_CHECK(i2c_master_stop(handle_i2c));
ESP_ERROR_CHECK(i2c_master_cmd_begin(I2C_MASTER_NUM, handle_i2c, I2C_TIMEOUT_MS / portTICK_RATE_MS));
i2c_cmd_link_delete(handle_i2c);
break;
}
}
return 0;
} // u8g2_esp32_i2c_byte_cb
