/**
Sets the current local time and date information.
@param Time A pointer to the current time.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
**/
EFI_STATUS
EFIAPI
LibSetTime (
IN EFI_TIME *Time
)
{
EFI_STATUS Status = EFI_SUCCESS;
UINT32 EpochSeconds;
// Check the input parameters are within the range specified by UEFI
if (!IsTimeValid (Time)) {
return EFI_INVALID_PARAMETER;
}
// Convert time to raw seconds
EpochSeconds = EfiTimeToEpoch (Time);
// Issue delayed write to time register
RtcDelayedWrite (RTC_TIME_REG, EpochSeconds);
return Status;
}
/**
Sets the system wakeup alarm clock time.
@param Enabled Enable or disable the wakeup alarm.
@param Time If Enable is TRUE, the time to set the wakeup alarm for.
@retval EFI_SUCCESS If Enable is TRUE, then the wakeup alarm was enabled. If
Enable is FALSE, then the wakeup alarm was disabled.
@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR The wakeup time could not be set due to a hardware error.
@retval EFI_UNSUPPORTED A wakeup timer is not supported on this platform.
**/
EFI_STATUS
EFIAPI
LibSetWakeupTime (
IN BOOLEAN Enabled,
OUT EFI_TIME *Time
)
{
UINT32 WakeupSeconds;
// Convert time to raw seconds
WakeupSeconds = EfiTimeToEpoch (Time);
// Issue delayed write to alarm register
RtcDelayedWrite (RTC_ALARM_2_REG, WakeupSeconds);
if (Enabled) {
MmioWrite32 (mArmadaRtcBase + RTC_IRQ_2_CONFIG_REG, RTC_IRQ_ALARM_EN);
} else {
MmioWrite32 (mArmadaRtcBase + RTC_IRQ_2_CONFIG_REG, 0);
}
return EFI_SUCCESS;
}
/**
Sets the current local time and date information.
@param Time A pointer to the current time.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
**/
EFI_STATUS
EFIAPI
LibSetTime (
IN EFI_TIME *Time
)
{
EFI_STATUS Status;
UINTN EpochSeconds;
UINTN Temp;
// Check the input parameters are within the range specified by UEFI
if ((Time->Year < 1900) ||
(Time->Year > 9999) ||
(Time->Month < 1 ) ||
(Time->Month > 12 ) ||
(!DayValid (Time) ) ||
(Time->Hour > 23 ) ||
(Time->Minute > 59 ) ||
(Time->Second > 59 ) ||
(Time->Nanosecond > 999999999) ||
(!((Time->TimeZone == EFI_UNSPECIFIED_TIMEZONE) || ((Time->TimeZone >= -1440) && (Time->TimeZone <= 1440)))) ||
(Time->Daylight & (~(EFI_TIME_ADJUST_DAYLIGHT | EFI_TIME_IN_DAYLIGHT)))
) {
Status = EFI_INVALID_PARAMETER;
goto EXIT;
}
// Because the PL031 is a 32-bit counter counting seconds,
// the maximum time span is just over 136 years.
// Time is stored in Unix Epoch format, so it starts in 1970,
// Therefore it can not exceed the year 2106.
if ((Time->Year < 1970) || (Time->Year >= 2106)) {
Status = EFI_UNSUPPORTED;
goto EXIT;
}
EpochSeconds = EfiTimeToEpoch (Time);
// Adjust for the correct time zone, i.e. convert to UTC time zone
if (Time->TimeZone != EFI_UNSPECIFIED_TIMEZONE) {
EpochSeconds -= Time->TimeZone * SEC_PER_MIN;
}
// TODO: Automatic Daylight activation
// Adjust for the correct period
if ((Time->Daylight & EFI_TIME_IN_DAYLIGHT) == EFI_TIME_IN_DAYLIGHT) {
// Convert to un-adjusted time, i.e. fall back one hour
EpochSeconds -= SEC_PER_HOUR;
}
ArmArchTimerReadReg(CntPct,&Temp);
// UINT32 force convertion for PC-LINT
mEpochDiff = EpochSeconds - Temp / (UINT32) PcdGet32(PcdArmArchTimerFreqInHz);
// The accesses to Variable Services can be very slow, because we may be writing to Flash.
// Do this after having set the RTC.
// Save the current time zone information into non-volatile storage
Status = mRT->SetVariable (
(CHAR16 *)mTimeZoneVariableName,
&gEfiCallerIdGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
sizeof (Time->TimeZone),
(VOID *)&(Time->TimeZone)
);
if (EFI_ERROR (Status)) {
DEBUG ((
EFI_D_ERROR,
"LibSetTime: Failed to save %s variable to non-volatile storage, Status = %r\n",
mTimeZoneVariableName,
Status
));
goto EXIT;
}
// Save the current daylight information into non-volatile storage
Status = mRT->SetVariable (
(CHAR16 *)mDaylightVariableName,
&gEfiCallerIdGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
sizeof(Time->Daylight),
(VOID *)&(Time->Daylight)
);
if (EFI_ERROR (Status)) {
DEBUG ((
EFI_D_ERROR,
"LibSetTime: Failed to save %s variable to non-volatile storage, Status = %r\n",
mDaylightVariableName,
Status
));
goto EXIT;
}
EXIT:
return Status;
}
/**
Sets the current local time and date information.
@param Time A pointer to the current time.
@retval EFI_SUCCESS The operation completed successfully.
@retval EFI_INVALID_PARAMETER A time field is out of range.
@retval EFI_DEVICE_ERROR The time could not be set due due to hardware error.
**/
EFI_STATUS
EFIAPI
LibSetTime (
IN EFI_TIME *Time
)
{
EFI_STATUS Status;
UINTN EpochSeconds;
// Check the input parameters are within the range specified by UEFI
if ((Time->Year < 1900) ||
(Time->Year > 9999) ||
(Time->Month < 1 ) ||
(Time->Month > 12 ) ||
(!DayValid (Time) ) ||
(Time->Hour > 23 ) ||
(Time->Minute > 59 ) ||
(Time->Second > 59 ) ||
(Time->Nanosecond > 999999999) ||
(!((Time->TimeZone == EFI_UNSPECIFIED_TIMEZONE) || ((Time->TimeZone >= -1440) && (Time->TimeZone <= 1440)))) ||
(Time->Daylight & (~(EFI_TIME_ADJUST_DAYLIGHT | EFI_TIME_IN_DAYLIGHT)))
) {
Status = EFI_INVALID_PARAMETER;
goto EXIT;
}
// Because the PL031 is a 32-bit counter counting seconds,
// the maximum time span is just over 136 years.
// Time is stored in Unix Epoch format, so it starts in 1970,
// Therefore it can not exceed the year 2106.
if ((Time->Year < 1970) || (Time->Year >= 2106)) {
Status = EFI_UNSUPPORTED;
goto EXIT;
}
// Initialize the hardware if not already done
if (!mPL031Initialized) {
Status = InitializePL031 ();
if (EFI_ERROR (Status)) {
goto EXIT;
}
}
EpochSeconds = EfiTimeToEpoch (Time);
// Adjust for the correct time zone, i.e. convert to UTC time zone
if (Time->TimeZone != EFI_UNSPECIFIED_TIMEZONE) {
EpochSeconds -= Time->TimeZone * SEC_PER_MIN;
}
// TODO: Automatic Daylight activation
// Adjust for the correct period
if ((Time->Daylight & EFI_TIME_IN_DAYLIGHT) == EFI_TIME_IN_DAYLIGHT) {
// Convert to un-adjusted time, i.e. fall back one hour
EpochSeconds -= SEC_PER_HOUR;
}
// On some platforms we may have access to a battery backed up hardware clock.
//
// If such RTC exists then it must be updated first, before the PL031,
// to minimise any time drift. This is important because the battery backed-up
// RTC maintains the master time for the platform across reboots.
//
// If such RTC does not exist then the following function returns UNSUPPORTED.
Status = ArmPlatformSysConfigSet (SYS_CFG_RTC, EpochSeconds);
if ((EFI_ERROR (Status)) && (Status != EFI_UNSUPPORTED)){
// Any status message except SUCCESS and UNSUPPORTED indicates a hardware failure.
goto EXIT;
}
// Set the PL031
MmioWrite32 (mPL031RtcBase + PL031_RTC_LR_LOAD_REGISTER, EpochSeconds);
// The accesses to Variable Services can be very slow, because we may be writing to Flash.
// Do this after having set the RTC.
// Save the current time zone information into non-volatile storage
Status = mRT->SetVariable (
(CHAR16 *)mTimeZoneVariableName,
&gEfiCallerIdGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
sizeof (Time->TimeZone),
(VOID *)&(Time->TimeZone)
);
if (EFI_ERROR (Status)) {
DEBUG ((
EFI_D_ERROR,
"LibSetTime: Failed to save %s variable to non-volatile storage, Status = %r\n",
mTimeZoneVariableName,
Status
));
goto EXIT;
}
// Save the current daylight information into non-volatile storage
Status = mRT->SetVariable (
(CHAR16 *)mDaylightVariableName,
&gEfiCallerIdGuid,
EFI_VARIABLE_NON_VOLATILE | EFI_VARIABLE_BOOTSERVICE_ACCESS | EFI_VARIABLE_RUNTIME_ACCESS,
sizeof(Time->Daylight),
(VOID *)&(Time->Daylight)
);
if (EFI_ERROR (Status)) {
DEBUG ((
EFI_D_ERROR,
"LibSetTime: Failed to save %s variable to non-volatile storage, Status = %r\n",
mDaylightVariableName,
Status
));
goto EXIT;
}
EXIT:
return Status;
}
