END_TEST
START_TEST (test_Event_addEventAssignment4)
{
Event_t *e = Event_create(2, 2);
EventAssignment_t *ea
= EventAssignment_create(2, 2);
EventAssignment_setVariable(ea, "c");
EventAssignment_setMath(ea, SBML_parseFormula("a-n"));
EventAssignment_t *ea1
= EventAssignment_create(2, 2);
EventAssignment_setVariable(ea1, "c");
EventAssignment_setMath(ea1, SBML_parseFormula("a-n"));
int i = Event_addEventAssignment(e, ea);
fail_unless( i == LIBSBML_OPERATION_SUCCESS);
fail_unless( Event_getNumEventAssignments(e) == 1);
i = Event_addEventAssignment(e, ea1);
fail_unless( i == LIBSBML_DUPLICATE_OBJECT_ID);
fail_unless( Event_getNumEventAssignments(e) == 1);
EventAssignment_free(ea);
EventAssignment_free(ea1);
Event_free(e);
}
/**
* usage: this method sets up the events needed by the queues
* @method setup_Events
* @author: patrik.szabo
* @param arg0 - not used param for the task
* @return 0, if everything succeeded
*/
int setup_Events() {
Error_Block eb;
/* Default instance configuration params */
uartReadyEvent = Event_create(NULL, &eb);
if (uartReadyEvent == NULL) {
System_abort("UartReadyEvent create failed");
}
externalModuleReadyEvent = Event_create(NULL, &eb);
if (uartReadyEvent == NULL) {
System_abort("ExternalModuleReadyEvent create failed");
}
return (0);
}
int main(void)
{
/* Call board init functions */
uint32_t ui32SysClock;
ui32SysClock = SysCtlClockFreqSet((SYSCTL_XTAL_25MHZ |
SYSCTL_OSC_MAIN |
SYSCTL_USE_PLL |
SYSCTL_CFG_VCO_480), 120E6);
Board_initGeneral(ui32SysClock);
Board_initEMAC();
Board_initGPIO();
// Board_initI2C();
// Board_initSDSPI();
// Board_initSPI();
// Board_initUART();
// Board_initUSB(Board_USBDEVICE);
// Board_initUSBMSCHFatFs();
// Board_initWatchdog();
// Board_initWiFi();
setup_ledcube();
Mailbox_Params mbox_Params;
Error_Block eb;
Error_init(&eb);
_sem = Semaphore_create(0, NULL, &eb);
if (_sem == NULL) {
System_abort("Couldn't create semaphore");
}
ledEvent = Event_create(NULL,&eb);
Mailbox_Params_init(&mbox_Params);
mbox_Params.readerEvent=ledEvent;
mbox_Params.readerEventId=Event_Id_01;
mbox_led = Mailbox_create(sizeof(struct ledMatrix),1, &mbox_Params, &eb);
if(mbox_led == NULL){
// Do something with errorblock, in the real world
System_abort("woho!");
}
create_led_task((UArg) mbox_led);
//netOpenHook((UArg) mbox_led);
netOpenHook(mbox_led);
System_printf("Starting the example\nSystem provider is set to SysMin. "
"Halt the target to view any SysMin contents in ROV.\n");
/* SysMin will only print to the console when you call flush or exit */
System_flush();
/* Start BIOS */
BIOS_start();
return (0);
}
void
L3EventTest_setup (void)
{
E = Event_create(3, 1);
if (E == NULL)
{
fail("Event_create(3, 1) returned a NULL pointer.");
}
}
void
EventTest1_setup (void)
{
E = Event_create(2, 4);
if (E == NULL)
{
fail("Event_create() returned a NULL pointer.");
}
}
bool_t osCreateEvent(OsEvent *event)
{
//Create an event object
event->handle = Event_create(NULL, NULL);
//Check whether the returned handle is valid
if(event->handle != NULL)
return TRUE;
else
return FALSE;
}
END_TEST
START_TEST (test_Event_setUseValuesFromTriggerTime2)
{
Event_t *e = Event_create(2, 2);
int i = Event_setUseValuesFromTriggerTime(e, 0);
fail_unless( i == LIBSBML_UNEXPECTED_ATTRIBUTE);
Event_free(e);
}
END_TEST
START_TEST (test_Event_addEventAssignment3)
{
Event_t *e = Event_create(2, 2);
int i = Event_addEventAssignment(e, NULL);
fail_unless( i == LIBSBML_OPERATION_FAILED);
fail_unless( Event_getNumEventAssignments(e) == 0);
Event_free(e);
}
END_TEST
START_TEST (test_Event_setTimeUnits4)
{
Event_t *e = Event_create(2, 1);
int i = Event_setTimeUnits(e, NULL);
fail_unless( i == LIBSBML_OPERATION_SUCCESS);
fail_unless( !Event_isSetTimeUnits(e) );
Event_free(e);
}
void Event::begin()
{
Error_Block eb;
Error_init(&eb);
Event_Params params;
Event_Params_init(¶ms);
EventHandle = Event_create(¶ms, &eb);
if (EventHandle == NULL)
{
System_abort("Event create failed");
}
}
END_TEST
START_TEST (test_L3_Event_hasRequiredAttributes )
{
Event_t *e = Event_create (3, 1);
fail_unless ( !Event_hasRequiredAttributes(e));
Event_setUseValuesFromTriggerTime(e, 1);
fail_unless ( Event_hasRequiredAttributes(e));
Event_free(e);
}
END_TEST
START_TEST (test_Event_createEventAssignment)
{
Event_t *e = Event_create(2, 2);
EventAssignment_t *ea = Event_createEventAssignment(e);
fail_unless( Event_getNumEventAssignments(e) == 1);
fail_unless( SBase_getLevel((SBase_t *) (ea)) == 2 );
fail_unless( SBase_getVersion((SBase_t *) (ea)) == 2 );
Event_free(e);
}
END_TEST
START_TEST (test_L3_Event_hasRequiredElements )
{
Event_t *e = Event_create (3, 1);
fail_unless ( !Event_hasRequiredElements(e));
Trigger_t *t = Trigger_create(3, 1);
Event_setTrigger(e, t);
fail_unless ( Event_hasRequiredElements(e));
Event_free(e);
}
/*
* ======== main ========
*/
Int main()
{
Clock_Params clkParams;
Task_Params tskParams;
Mailbox_Params mbxParams;
Semaphore_Params semParams;
/* Create a one-shot Clock Instance with timeout = 5 system time units */
Clock_Params_init(&clkParams);
clkParams.startFlag = TRUE;
clk1 = Clock_create(clk0Fxn, 5, &clkParams, NULL);
/* Create an one-shot Clock Instance with timeout = 10 system time units */
Clock_Params_init(&clkParams);
clkParams.startFlag = TRUE;
clk2 = Clock_create(clk1Fxn, 10, &clkParams, NULL);
/* create an Event Instance */
evt = Event_create(NULL, NULL);
/* create a Semaphore Instance */
Semaphore_Params_init(&semParams);
semParams.mode = Semaphore_Mode_BINARY;
semParams.event = evt;
semParams.eventId = Event_Id_01;
sem = Semaphore_create(0, &semParams, NULL);
/* create a Mailbox Instance */
Mailbox_Params_init(&mbxParams);
mbxParams.readerEvent = evt;
mbxParams.readerEventId = Event_Id_02;
mbx = Mailbox_create(sizeof(MsgObj), 2, &mbxParams, NULL);
/* create a writer task */
Task_Params_init(&tskParams);
tskParams.priority = 1;
tskParams.arg0 = (UArg) mbx;
Task_create(writer, &tskParams, NULL);
/* create a reader task */
Task_create(reader, &tskParams, NULL);
BIOS_start(); /* does not return */
return(0);
}
END_TEST
START_TEST (test_Event_setUseValuesFromTriggerTime1)
{
Event_t *e = Event_create(2, 4);
int i = Event_setUseValuesFromTriggerTime(e, 0);
fail_unless( i == LIBSBML_OPERATION_SUCCESS);
fail_unless( Event_getUseValuesFromTriggerTime(e) == 0 );
i = Event_setUseValuesFromTriggerTime(e, 1);
fail_unless( i == LIBSBML_OPERATION_SUCCESS);
fail_unless( Event_getUseValuesFromTriggerTime(e) == 1 );
Event_free(e);
}
static Event_t *
rsbml_build_doc_event(SEXP r_event)
{
Event_t * event;
event = Event_create();
rsbml_build_doc_s_base((SBase_t *)event, r_event);
SET_ATTR(Event, event, Id, id, STRING);
SET_ATTR(Event, event, Name, name, STRING);
SET_ATTR(Event, event, Trigger, trigger, EXPRESSION);
SET_ATTR(Event, event, Delay, delay, EXPRESSION);
SET_ATTR(Event, event, TimeUnits, timeUnits, STRING);
ADD_LIST(Event, event, EventAssignment, eventAssignments, event_assignment);
return event;
}
END_TEST
START_TEST (test_Event_addEventAssignment2)
{
Event_t *e = Event_create(2, 2);
EventAssignment_t *ea
= EventAssignment_create(2, 3);
EventAssignment_setVariable(ea, "f");
EventAssignment_setMath(ea, SBML_parseFormula("a-n"));
int i = Event_addEventAssignment(e, ea);
fail_unless( i == LIBSBML_VERSION_MISMATCH);
fail_unless( Event_getNumEventAssignments(e) == 0);
EventAssignment_free(ea);
Event_free(e);
}
END_TEST
START_TEST (test_Event_setTimeUnits3)
{
const char *units = "1second";
Event_t *e = Event_create(2, 1);
int i = Event_setTimeUnits(e, units);
fail_unless( i == LIBSBML_INVALID_ATTRIBUTE_VALUE);
fail_unless( !Event_isSetTimeUnits(e) );
i = Event_unsetTimeUnits(e);
fail_unless( i == LIBSBML_OPERATION_SUCCESS );
fail_unless( !Event_isSetTimeUnits(e) );
Event_free(e);
}
END_TEST
START_TEST (test_Event_setTimeUnits2)
{
const char *units = "second";
Event_t *e = Event_create(2, 1);
int i = Event_setTimeUnits(e, units);
fail_unless( i == LIBSBML_OPERATION_SUCCESS);
fail_unless( !strcmp(Event_getTimeUnits(e), units) );
fail_unless( Event_isSetTimeUnits(e) );
i = Event_unsetTimeUnits(e);
fail_unless( i == LIBSBML_OPERATION_SUCCESS );
fail_unless( !Event_isSetTimeUnits(e) );
Event_free(e);
}
END_TEST
START_TEST (test_L3_Event_hasRequiredElements )
{
Event_t *e = Event_create (3, 1);
fail_unless ( !Event_hasRequiredElements(e));
Trigger_t *t = Trigger_create(3, 1);
ASTNode_t* math = SBML_parseFormula("true");
Trigger_setMath(t, math);
ASTNode_free(math);
Trigger_setInitialValue(t, 1);
Trigger_setPersistent(t, 1);
Event_setTrigger(e, t);
fail_unless ( Event_hasRequiredElements(e));
Event_free(e);
Trigger_free(t);
}
Int main(Int argc, char* argv[])
{
RcmServer_Params rcmServerParams;
System_printf("%s starting..\n", MultiProc_getName(MultiProc_self()));
/*
* Enable use of runtime Diags_setMask per module:
*
* Codes: E = ENTRY, X = EXIT, L = LIFECYCLE, F = INFO, S = STATUS
*/
Diags_setMask("ti.ipc.rpmsg.MessageQCopy=EXLFS");
/* Setup the table of services, so clients can create and connect to
* new service instances:
*/
ServiceMgr_init();
/* initialize RcmServer create params */
RcmServer_Params_init(&rcmServerParams);
/* The first function, at index 0, is a special create function, which
* gets passed a Service_Handle argument.
* We set this at run time as our C compiler is not allowing named union
* field initialization:
*/
OMXServer_fxnTab.elem[0].addr.createFxn = RPC_SKEL_GetHandle;
rcmServerParams.priority = Thread_Priority_ABOVE_NORMAL;
rcmServerParams.fxns.length = OMXServer_fxnTab.length;
rcmServerParams.fxns.elem = OMXServer_fxnTab.elem;
/* Register an OMX service to create and call new OMX components: */
ServiceMgr_register("OMX", &rcmServerParams);
/* Some background ping testing tasks, used by rpmsg samples: */
//start_ping_tasks();
#if 0 /* DSP or CORE0 or IPU */
/* Run a background task to test rpmsg_resmgr service */
start_resmgr_task();
#endif
#if 0 /* DSP or CORE0 or IPU */
/* Run a background task to test hwspinlock */
start_hwSpinlock_task();
#endif
/* Create 1 task with priority 15 */
Error_init(&eb0);
Task_Params_init(&taskParams0);
//taskParams0.stackSize = 512;
taskParams0.priority = 15;
taskParams0.affinity = 1;
taskParams0.arg0 = (xdc_UArg)(&(t1)) ;
taskParams0.arg1 = 0 ;
/* Create 1 task with priority 15 */
Error_init(&eb1);
Task_Params_init(&taskParams1);
//taskParams1.stackSize = 512;
taskParams1.priority = 15;
taskParams1.affinity = 0;
taskParams1.arg0 = (xdc_UArg)(&(t2)) ;
taskParams1.arg1 = 1 ;
/* create an Event object. All events are binary */
Error_Block eb;
Error_init(&eb);
edgeDetectEvent = Event_create(NULL, &eb);
if (edgeDetectEvent == NULL) {
System_abort("Event create failed");
}
local_barrier_sense = local_barrier_counter = 2 ;
sem0 = Semaphore_create(1, NULL, NULL) ;
/* Start the ServiceMgr services */
ServiceMgr_start(0);
BIOS_start();
return (0);
}
/** ============================================================================
* @n@b Setup_Rx
*
* @b Description
* @n This API sets up all relevant data structures and configuration required
* for receiving data from PASS/Ethernet. It sets up a Rx free descriptor queue
* with some empty pre-allocated buffers to receive data, and an Rx queue
* to which the Rxed data is streamed for the example application. This API
* also sets up the QM high priority accumulation interrupts required to
* receive data from the Rx queue.
*
* @param[in]
* @n None
*
* @return Int32
* -1 - Error
* 0 - Success
* =============================================================================
*/
Int32 Setup_Rx (Ethernet *pThis)
{
Int32 result;
UInt8 isAllocated, accChannelNum;
UInt16 numAccEntries, intThreshold, i;
Qmss_Queue rxFreeQInfo, rxQInfo;
Ptr pCppiDesc;
Qmss_AccCmdCfg accCfg;
Cppi_RxFlowCfg rxFlowCfg;
Ptr pDataBuffer;
Error_Block eb;
Uint32 mySWInfo[] = {0x11112222, 0x33334444};
/* Open a Receive (Rx) queue.
*
* This queue will be used to hold all the packets received by PASS/CPSW
*
* Open the next available High Priority Accumulation queue for Rx.
*/
if ((gRxQHnd = Qmss_queueOpen (Qmss_QueueType_HIGH_PRIORITY_QUEUE, QMSS_PARAM_NOT_SPECIFIED, &isAllocated)) < 0)
{
uart_write ("Error opening a High Priority Accumulation Rx queue \n");
return -1;
}
rxQInfo = Qmss_getQueueNumber (gRxQHnd);
uart_write ("Opened RX queue Number %d \n",rxQInfo.qNum);
/* Setup high priority accumulation interrupts on the Rx queue.
*
* Let's configure the accumulator with the following settings:
* (1) Interrupt pacing disabled.
* (2) Interrupt on every received packet
*/
intThreshold = RX_INT_THRESHOLD;
numAccEntries = (intThreshold + 1) * 2;
accChannelNum = PA_ACC_CHANNEL_NUM;
/* Initialize the accumulator list memory */
memset ((Void *) gHiPriAccumList, 0, numAccEntries * 4);
/* Ensure that the accumulator channel we are programming is not
* in use currently.
*/
result = Qmss_disableAccumulator (Qmss_PdspId_PDSP1, accChannelNum);
if (result != QMSS_ACC_SOK && result != QMSS_ACC_CHANNEL_NOT_ACTIVE)
{
uart_write ("Error Disabling high priority accumulator for channel : %d error code: %d\n",
accChannelNum, result);
return -1;
}
/* Setup the accumulator settings */
accCfg.channel = accChannelNum;
accCfg.command = Qmss_AccCmd_ENABLE_CHANNEL;
accCfg.queueEnMask = 0;
accCfg.listAddress = Convert_CoreLocal2GlobalAddr((Uint32) gHiPriAccumList);
// accCfg.listAddress = gHiPriAccumList;
accCfg.queMgrIndex = gRxQHnd;
accCfg.maxPageEntries = (intThreshold + 1); /* Add an extra entry for holding the entry count */
accCfg.timerLoadCount = 0;
accCfg.interruptPacingMode = Qmss_AccPacingMode_LAST_INTERRUPT;
accCfg.listEntrySize = Qmss_AccEntrySize_REG_D;
accCfg.listCountMode = Qmss_AccCountMode_ENTRY_COUNT;
accCfg.multiQueueMode = Qmss_AccQueueMode_SINGLE_QUEUE;
/* Program the accumulator */
if ((result = Qmss_programAccumulator (Qmss_PdspId_PDSP1, &accCfg)) != QMSS_ACC_SOK)
{
uart_write ("Error Programming high priority accumulator for channel : %d queue : %d error code : %d\n",
accCfg.channel, accCfg.queMgrIndex, result);
return -1;
}
Error_init(&eb);
pThis->RxEventHandle = Event_create(NULL,&eb);
if (pThis->RxEventHandle == NULL)
{
uart_write("Event create failed");
return -1;
}
memset(pThis->pRxDataPtr,0,sizeof(pThis->pRxDataPtr));
pThis->RxDataHead = 0;
pThis->RxDataTail = 0;
Intr_Init(&pThis->oEthIntr, INTR_ITEM_ETH_RX,(Intr_Handler)Cpsw_RxISR, (void*)pThis);
/* Open a Rx Free Descriptor Queue (Rx FDQ).
*
* This queue will hold all the Rx free decriptors. These descriptors will be
* used by the PASS CPDMA to hold data received via CPSW.
*/
if ((gRxFreeQHnd = Qmss_queueOpen (Qmss_QueueType_STARVATION_COUNTER_QUEUE, QMSS_PARAM_NOT_SPECIFIED, &isAllocated)) < 0)
{
uart_write ("Error opening Rx Free descriptor queue \n");
return -1;
}
rxFreeQInfo = Qmss_getQueueNumber (gRxFreeQHnd);
uart_write("Opened RX Free queue Number %d\n",gRxFreeQHnd);
/* Attach some free descriptors to the Rx free queue we just opened. */
for (i = 0; i < NUM_RX_DESC; i++)
{
/* Get a free descriptor from the global free queue we setup
* during initialization.
*/
if ((pCppiDesc = Qmss_queuePop (gGlobalFreeQHnd)) == NULL)
{
break;
}
/* The descriptor address returned from the hardware has the
* descriptor size appended to the address in the last 4 bits.
*
* To get the true descriptor size, always mask off the last
* 4 bits of the address.
*/
pCppiDesc = (Ptr) ((UInt32) pCppiDesc & 0xFFFFFFF0);
if ((pDataBuffer = (Ptr) Memory_alloc((IHeap_Handle)heap2, ETHER_MAX_SIZE, 0, NULL)) == NULL)
{
uart_write ("Error allocating memory for Rx data buffer \n");
break;
}
/* Populate the Rx free descriptor with the buffer we just allocated. */
Cppi_setData (Cppi_DescType_HOST, pCppiDesc, (UInt8 *)Convert_CoreLocal2GlobalAddr((UInt32)pDataBuffer), ETHER_MAX_SIZE);
/* Save original buffer information */
Cppi_setOriginalBufInfo (Cppi_DescType_HOST, pCppiDesc, (UInt8 *)Convert_CoreLocal2GlobalAddr((UInt32)pDataBuffer), ETHER_MAX_SIZE);
/* Setup the Completion queue:
*
* Setup the return policy for this desc to return to the free q we just
* setup instead of the global free queue.
*/
Cppi_setReturnQueue (Cppi_DescType_HOST, pCppiDesc, rxFreeQInfo);
Cppi_setSoftwareInfo (Cppi_DescType_HOST, pCppiDesc, (UInt8 *) mySWInfo);
Cppi_setPacketLen (Cppi_DescType_HOST, pCppiDesc, ETHER_MAX_SIZE);
/* Push descriptor to Tx free queue */
Qmss_queuePushDescSize (gRxFreeQHnd, pCppiDesc, SIZE_CPSW_HOST_DESC);
}
if (i != NUM_RX_DESC)
{
uart_write ("Error allocating Rx free descriptors \n");
return -1;
}
//count=Qmss_getQueueEntryCount(gRxFreeQHnd);
//platform_write("Total %d entries in queue %d\n",count,gRxFreeQHnd);
/* Setup a Rx Flow.
*
* A Rx flow encapsulates all relevant data properties that CPDMA would
* have to know in order to succefully receive data.
*/
/* Initialize the flow configuration */
memset (&rxFlowCfg, 0, sizeof(Cppi_RxFlowCfg));
/* Let CPPI pick the next available flow */
rxFlowCfg.flowIdNum = CPPI_PARAM_NOT_SPECIFIED;
rxFlowCfg.rx_dest_qmgr = rxQInfo.qMgr;
rxFlowCfg.rx_dest_qnum = rxQInfo.qNum;
rxFlowCfg.rx_desc_type = Cppi_DescType_HOST;
rxFlowCfg.rx_ps_location = Cppi_PSLoc_PS_IN_DESC;
rxFlowCfg.rx_psinfo_present = 1; /* Enable PS info */
rxFlowCfg.rx_error_handling = 0; /* Drop the packet, do not retry on starvation by default */
rxFlowCfg.rx_einfo_present = 1; /* EPIB info present */
rxFlowCfg.rx_dest_tag_lo_sel = 0; /* Disable tagging */
rxFlowCfg.rx_dest_tag_hi_sel = 0;
rxFlowCfg.rx_src_tag_lo_sel = 0;
rxFlowCfg.rx_src_tag_hi_sel = 0;
rxFlowCfg.rx_size_thresh0_en = 0; /* By default, we disable Rx Thresholds */
rxFlowCfg.rx_size_thresh1_en = 0; /* By default, we disable Rx Thresholds */
rxFlowCfg.rx_size_thresh2_en = 0; /* By default, we disable Rx Thresholds */
rxFlowCfg.rx_size_thresh0 = 0x0;
rxFlowCfg.rx_size_thresh1 = 0x0;
rxFlowCfg.rx_size_thresh2 = 0x0;
rxFlowCfg.rx_fdq0_sz0_qmgr = rxFreeQInfo.qMgr; /* Setup the Receive free queue for the flow */
rxFlowCfg.rx_fdq0_sz0_qnum = rxFreeQInfo.qNum;
rxFlowCfg.rx_fdq0_sz1_qnum = 0x0;
rxFlowCfg.rx_fdq0_sz1_qmgr = 0x0;
rxFlowCfg.rx_fdq0_sz2_qnum = 0x0;
rxFlowCfg.rx_fdq0_sz2_qmgr = 0x0;
rxFlowCfg.rx_fdq0_sz3_qnum = 0x0;
rxFlowCfg.rx_fdq0_sz3_qmgr = 0x0;
rxFlowCfg.rx_fdq1_qnum = rxFreeQInfo.qNum; /* Use the Rx Queue to pick descriptors */
rxFlowCfg.rx_fdq1_qmgr = rxFreeQInfo.qMgr;
rxFlowCfg.rx_fdq2_qnum = rxFreeQInfo.qNum; /* Use the Rx Queue to pick descriptors */
rxFlowCfg.rx_fdq2_qmgr = rxFreeQInfo.qMgr;
rxFlowCfg.rx_fdq3_qnum = rxFreeQInfo.qNum; /* Use the Rx Queue to pick descriptors */
rxFlowCfg.rx_fdq3_qmgr = rxFreeQInfo.qMgr;
/* Configure the Rx flow */
if ((gRxFlowHnd = Cppi_configureRxFlow (gCpdmaHnd, &rxFlowCfg, &isAllocated)) == NULL)
{
uart_write ("Error configuring Rx flow \n");
return -1;
}
else
{
//platform_write("Rx flow configured. handle %p Id %d \n",gRxFlowHnd,Cppi_getFlowId (gRxFlowHnd));
}
/* All done with Rx configuration. Return success. */
return 0;
}