Ejemplo n.º 1
0
void
smgr_redo(XLogRecPtr lsn, XLogRecord *record)
{
	uint8		info = record->xl_info & ~XLR_INFO_MASK;

	if (info == XLOG_SMGR_CREATE)
	{
		xl_smgr_create *xlrec = (xl_smgr_create *) XLogRecGetData(record);
		SMgrRelation reln;

		reln = smgropen(xlrec->rnode);
		smgrcreate(reln, false, true);
	}
	else if (info == XLOG_SMGR_TRUNCATE)
	{
		xl_smgr_truncate *xlrec = (xl_smgr_truncate *) XLogRecGetData(record);
		SMgrRelation reln;
		BlockNumber newblks;

		reln = smgropen(xlrec->rnode);

		/* Can't use smgrtruncate because it would try to xlog */

		/*
		 * First, force bufmgr to drop any buffers it has for the to-be-
		 * truncated blocks.  We must do this, else subsequent XLogReadBuffer
		 * operations will not re-extend the file properly.
		 */
		DropRelFileNodeBuffers(xlrec->rnode, false, xlrec->blkno);

		/*
		 * Tell the free space map to forget anything it may have stored for
		 * the about-to-be-deleted blocks.	We want to be sure it won't return
		 * bogus block numbers later on.
		 */
		FreeSpaceMapTruncateRel(&reln->smgr_rnode, xlrec->blkno);

		/* Do the truncation */
		newblks = (*(smgrsw[reln->smgr_which].smgr_truncate)) (reln,
															   xlrec->blkno,
															   false);
		if (newblks == InvalidBlockNumber)
			ereport(WARNING,
					(errcode_for_file_access(),
			  errmsg("could not truncate relation %u/%u/%u to %u blocks: %m",
					 reln->smgr_rnode.spcNode,
					 reln->smgr_rnode.dbNode,
					 reln->smgr_rnode.relNode,
					 xlrec->blkno)));

		/* Also tell xlogutils.c about it */
		XLogTruncateRelation(xlrec->rnode, xlrec->blkno);
	}
	else
		elog(PANIC, "smgr_redo: unknown op code %u", info);
}
Ejemplo n.º 2
0
/*
 *	smgrtruncate() -- Truncate supplied relation to the specified number
 *					  of blocks
 *
 *		Returns the number of blocks on success, aborts the current
 *		transaction on failure.
 */
BlockNumber
smgrtruncate(SMgrRelation reln, BlockNumber nblocks, bool isTemp)
{
	BlockNumber newblks;

	/*
	 * Get rid of any buffers for the about-to-be-deleted blocks. bufmgr will
	 * just drop them without bothering to write the contents.
	 */
	DropRelFileNodeBuffers(reln->smgr_rnode, isTemp, nblocks);

	/*
	 * Tell the free space map to forget anything it may have stored for the
	 * about-to-be-deleted blocks.	We want to be sure it won't return bogus
	 * block numbers later on.
	 */
	FreeSpaceMapTruncateRel(&reln->smgr_rnode, nblocks);

	/* Do the truncation */
	newblks = (*(smgrsw[reln->smgr_which].smgr_truncate)) (reln, nblocks,
														   isTemp);
	if (newblks == InvalidBlockNumber)
		ereport(ERROR,
				(errcode_for_file_access(),
			  errmsg("could not truncate relation %u/%u/%u to %u blocks: %m",
					 reln->smgr_rnode.spcNode,
					 reln->smgr_rnode.dbNode,
					 reln->smgr_rnode.relNode,
					 nblocks)));

	if (!isTemp)
	{
		/*
		 * Make a non-transactional XLOG entry showing the file truncation.
		 * It's non-transactional because we should replay it whether the
		 * transaction commits or not; the underlying file change is certainly
		 * not reversible.
		 */
		XLogRecPtr	lsn;
		XLogRecData rdata;
		xl_smgr_truncate xlrec;

		xlrec.blkno = newblks;
		xlrec.rnode = reln->smgr_rnode;

		rdata.data = (char *) &xlrec;
		rdata.len = sizeof(xlrec);
		rdata.buffer = InvalidBuffer;
		rdata.next = NULL;

		lsn = XLogInsert(RM_SMGR_ID, XLOG_SMGR_TRUNCATE | XLOG_NO_TRAN,
						 &rdata);
	}

	return newblks;
}
Ejemplo n.º 3
0
void
smgr_redo(XLogRecPtr lsn, XLogRecord *record)
{
	uint8		info = record->xl_info & ~XLR_INFO_MASK;

	/* Backup blocks are not used in smgr records */
	Assert(!(record->xl_info & XLR_BKP_BLOCK_MASK));

	if (info == XLOG_SMGR_CREATE)
	{
		xl_smgr_create *xlrec = (xl_smgr_create *) XLogRecGetData(record);
		SMgrRelation reln;

		reln = smgropen(xlrec->rnode);
		smgrcreate(reln, MAIN_FORKNUM, true);
	}
	else if (info == XLOG_SMGR_TRUNCATE)
	{
		xl_smgr_truncate *xlrec = (xl_smgr_truncate *) XLogRecGetData(record);
		SMgrRelation reln;
		Relation	rel;

		reln = smgropen(xlrec->rnode);

		/*
		 * Forcibly create relation if it doesn't exist (which suggests that
		 * it was dropped somewhere later in the WAL sequence).  As in
		 * XLogOpenRelation, we prefer to recreate the rel and replay the log
		 * as best we can until the drop is seen.
		 */
		smgrcreate(reln, MAIN_FORKNUM, true);

		smgrtruncate(reln, MAIN_FORKNUM, xlrec->blkno, false);

		/* Also tell xlogutils.c about it */
		XLogTruncateRelation(xlrec->rnode, MAIN_FORKNUM, xlrec->blkno);

		/* Truncate FSM and VM too */
		rel = CreateFakeRelcacheEntry(xlrec->rnode);

		if (smgrexists(reln, FSM_FORKNUM))
			FreeSpaceMapTruncateRel(rel, xlrec->blkno);
		if (smgrexists(reln, VISIBILITYMAP_FORKNUM))
			visibilitymap_truncate(rel, xlrec->blkno);

		FreeFakeRelcacheEntry(rel);
	}
	else
		elog(PANIC, "smgr_redo: unknown op code %u", info);
}
Ejemplo n.º 4
0
/*
 * RelationTruncate
 *		Physically truncate a relation to the specified number of blocks.
 *
 * This includes getting rid of any buffers for the blocks that are to be
 * dropped.
 */
void
RelationTruncate(Relation rel, BlockNumber nblocks)
{
	bool		fsm;
	bool		vm;

	/* Open it at the smgr level if not already done */
	RelationOpenSmgr(rel);

	/*
	 * Make sure smgr_targblock etc aren't pointing somewhere past new end
	 */
	rel->rd_smgr->smgr_targblock = InvalidBlockNumber;
	rel->rd_smgr->smgr_fsm_nblocks = InvalidBlockNumber;
	rel->rd_smgr->smgr_vm_nblocks = InvalidBlockNumber;

	/* Truncate the FSM first if it exists */
	fsm = smgrexists(rel->rd_smgr, FSM_FORKNUM);
	if (fsm)
		FreeSpaceMapTruncateRel(rel, nblocks);

	/* Truncate the visibility map too if it exists. */
	vm = smgrexists(rel->rd_smgr, VISIBILITYMAP_FORKNUM);
	if (vm)
		visibilitymap_truncate(rel, nblocks);

	/*
	 * We WAL-log the truncation before actually truncating, which means
	 * trouble if the truncation fails. If we then crash, the WAL replay
	 * likely isn't going to succeed in the truncation either, and cause a
	 * PANIC. It's tempting to put a critical section here, but that cure
	 * would be worse than the disease. It would turn a usually harmless
	 * failure to truncate, that might spell trouble at WAL replay, into a
	 * certain PANIC.
	 */
	if (!rel->rd_istemp)
	{
		/*
		 * Make an XLOG entry reporting the file truncation.
		 */
		XLogRecPtr	lsn;
		XLogRecData rdata;
		xl_smgr_truncate xlrec;

		xlrec.blkno = nblocks;
		xlrec.rnode = rel->rd_node;

		rdata.data = (char *) &xlrec;
		rdata.len = sizeof(xlrec);
		rdata.buffer = InvalidBuffer;
		rdata.next = NULL;

		lsn = XLogInsert(RM_SMGR_ID, XLOG_SMGR_TRUNCATE, &rdata);

		/*
		 * Flush, because otherwise the truncation of the main relation might
		 * hit the disk before the WAL record, and the truncation of the FSM
		 * or visibility map. If we crashed during that window, we'd be left
		 * with a truncated heap, but the FSM or visibility map would still
		 * contain entries for the non-existent heap pages.
		 */
		if (fsm || vm)
			XLogFlush(lsn);
	}

	/* Do the real work */
	smgrtruncate(rel->rd_smgr, MAIN_FORKNUM, nblocks, rel->rd_istemp);
}
Ejemplo n.º 5
0
void
smgr_redo(XLogRecPtr lsn, XLogRecord *record)
{
	uint8		info = record->xl_info & ~XLR_INFO_MASK;

	/* Backup blocks are not used in smgr records */
	Assert(!(record->xl_info & XLR_BKP_BLOCK_MASK));

	if (info == XLOG_SMGR_CREATE)
	{
		xl_smgr_create *xlrec = (xl_smgr_create *) XLogRecGetData(record);
		SMgrRelation reln;

		reln = smgropen(xlrec->rnode, InvalidBackendId);
		smgrcreate(reln, xlrec->forkNum, true);
	}
	else if (info == XLOG_SMGR_TRUNCATE)
	{
		xl_smgr_truncate *xlrec = (xl_smgr_truncate *) XLogRecGetData(record);
		SMgrRelation reln;
		Relation	rel;

		reln = smgropen(xlrec->rnode, InvalidBackendId);

		/*
		 * Forcibly create relation if it doesn't exist (which suggests that
		 * it was dropped somewhere later in the WAL sequence).  As in
		 * XLogReadBuffer, we prefer to recreate the rel and replay the log as
		 * best we can until the drop is seen.
		 */
		smgrcreate(reln, MAIN_FORKNUM, true);

		/*
		 * Before we perform the truncation, update minimum recovery point
		 * to cover this WAL record. Once the relation is truncated, there's
		 * no going back. The buffer manager enforces the WAL-first rule
		 * for normal updates to relation files, so that the minimum recovery
		 * point is always updated before the corresponding change in the
		 * data file is flushed to disk. We have to do the same manually
		 * here.
		 *
		 * Doing this before the truncation means that if the truncation fails
		 * for some reason, you cannot start up the system even after restart,
		 * until you fix the underlying situation so that the truncation will
		 * succeed. Alternatively, we could update the minimum recovery point
		 * after truncation, but that would leave a small window where the
		 * WAL-first rule could be violated.
		 */
		XLogFlush(lsn);

		smgrtruncate(reln, MAIN_FORKNUM, xlrec->blkno);

		/* Also tell xlogutils.c about it */
		XLogTruncateRelation(xlrec->rnode, MAIN_FORKNUM, xlrec->blkno);

		/* Truncate FSM and VM too */
		rel = CreateFakeRelcacheEntry(xlrec->rnode);

		if (smgrexists(reln, FSM_FORKNUM))
			FreeSpaceMapTruncateRel(rel, xlrec->blkno);
		if (smgrexists(reln, VISIBILITYMAP_FORKNUM))
			visibilitymap_truncate(rel, xlrec->blkno);

		FreeFakeRelcacheEntry(rel);
	}
	else
		elog(PANIC, "smgr_redo: unknown op code %u", info);
}