/*******************************************************************************
* @fn SensorTagOad_init
*
* @brief
* @param none
*
* @return none
*/
void SensorTagOad_init(void)
{
// Register connection parameter update
GAPRole_RegisterAppCBs(¶mUpdateCB);
SensorTagConnectionControl_init(); // Connection control to
// support OAD for iOs/Android
OAD_addService(); // OAD Profile
OAD_register((oadTargetCBs_t *)&sensorTag_oadCBs);
hOadQ = Util_constructQueue(&oadQ);
}
/*********************************************************************
* @fn SNP_initGAP
*
* @brief Initial parameter needed for using SPNP GATT functionality
*
* @return None.
*/
void SNP_initGAP(void)
{
// Setup the GAP
GAP_SetParamValue(TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL);
// Setup the GAP Peripheral Role Profile
{
// For all hardware platforms, device starts advertising upon initialization
uint8_t initialAdvertEnable = FALSE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16_t advertOffTime = 0;
uint8_t enableUpdateRequest = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16_t desiredMinInterval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16_t desiredMaxInterval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16_t desiredSlaveLatency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16_t desiredConnTimeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t),
&initialAdvertEnable);
GAPRole_SetParameter(GAPROLE_ADVERT_OFF_TIME, sizeof(uint16_t),
&advertOffTime);
GAPRole_SetParameter(GAPROLE_SCAN_RSP_DATA, sizeof(scanRspData),
scanRspData);
GAPRole_SetParameter(GAPROLE_ADVERT_DATA, sizeof(advertData),
advertData);
GAPRole_SetParameter(GAPROLE_PARAM_UPDATE_ENABLE, sizeof(uint8_t),
&enableUpdateRequest);
GAPRole_SetParameter(GAPROLE_MIN_CONN_INTERVAL, sizeof(uint16_t),
&desiredMinInterval);
GAPRole_SetParameter(GAPROLE_MAX_CONN_INTERVAL, sizeof(uint16_t),
&desiredMaxInterval);
GAPRole_SetParameter(GAPROLE_SLAVE_LATENCY, sizeof(uint16_t),
&desiredSlaveLatency);
GAPRole_SetParameter(GAPROLE_TIMEOUT_MULTIPLIER, sizeof(uint16_t),
&desiredConnTimeout);
}
// Initialize the Advertising data store table with a valid entry
// for the non-connectable mode.
{
uint8_t *pDataPtr;
advPtrTable[SNP_ADV_DATA_NON_CONN_IDX].pData = pDataPtr = ICall_malloc(sizeof(advertData));
if(pDataPtr)
{
advPtrTable[SNP_ADV_DATA_NON_CONN_IDX].length = sizeof(advertData);
memcpy(pDataPtr, advertData, sizeof(advertData));
}
else
{
exceptionHandler();
}
}
// Set advertising interval
{
uint16_t advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MAX, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MAX, advInt);
}
GAPRole_RegisterAppCBs(¶mUpdateCB);
}
/*********************************************************************
* @fn SensorTag_Init
*
* @brief Initialization function for the Simple BLE Peripheral App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SensorTag_Init( uint8 task_id )
{
sensorTag_TaskID = task_id;
// Setup the GAP
VOID GAP_SetParamValue( TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL );
// Setup the GAP Peripheral Role Profile
{
// Device starts advertising upon initialization
uint8 initial_advertising_enable = FALSE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request );
GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval );
GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval );
GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency );
GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout );
}
// Set the GAP Characteristics
GGS_SetParameter( GGS_DEVICE_NAME_ATT, sizeof(attDeviceName), attDeviceName );
// Set advertising interval
{
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
}
// Setup the GAP Bond Manager
{
uint32 passkey = 0; // passkey "000000"
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = TRUE;
uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8 bonding = TRUE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding );
}
// Add services
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
DevInfo_AddService(); // Device Information Service
IRTemp_AddService (GATT_ALL_SERVICES ); // IR Temperature Service
Accel_AddService (GATT_ALL_SERVICES ); // Accelerometer Service
Humidity_AddService (GATT_ALL_SERVICES ); // Humidity Service
Magnetometer_AddService( GATT_ALL_SERVICES ); // Magnetometer Service
Barometer_AddService( GATT_ALL_SERVICES ); // Barometer Service
Gyro_AddService( GATT_ALL_SERVICES ); // Gyro Service
SK_AddService( GATT_ALL_SERVICES ); // Simple Keys Profile
Test_AddService( GATT_ALL_SERVICES ); // Test Profile
CcService_AddService( GATT_ALL_SERVICES ); // Connection Control Service
#if defined FEATURE_OAD
VOID OADTarget_AddService(); // OAD Profile
#endif
// Setup the Seensor Profile Characteristic Values
resetCharacteristicValues();
// Register for all key events - This app will handle all key events
RegisterForKeys( sensorTag_TaskID );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
// Initialise sensor drivers
HALIRTempInit();
HalHumiInit();
HalMagInit();
HalAccInit();
HalBarInit();
HalGyroInit();
// Register callbacks with profile
VOID IRTemp_RegisterAppCBs( &sensorTag_IrTempCBs );
VOID Magnetometer_RegisterAppCBs( &sensorTag_MagnetometerCBs );
VOID Accel_RegisterAppCBs( &sensorTag_AccelCBs );
VOID Humidity_RegisterAppCBs( &sensorTag_HumidCBs );
VOID Barometer_RegisterAppCBs( &sensorTag_BarometerCBs );
VOID Gyro_RegisterAppCBs( &sensorTag_GyroCBs );
VOID Test_RegisterAppCBs( &sensorTag_TestCBs );
VOID CcService_RegisterAppCBs( &sensorTag_ccCBs );
VOID GAPRole_RegisterAppCBs( ¶mUpdateCB );
// Enable clock divide on halt
// This reduces active current while radio is active and CC254x MCU
// is halted
HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT );
// Setup a delayed profile startup
osal_set_event( sensorTag_TaskID, ST_START_DEVICE_EVT );
}
/*******************************************************************************
* @fn SensorTag_init
*
* @brief Called during initialization and contains application
* specific initialization (ie. hardware initialization/setup,
* table initialization, power up notification, etc), and
* profile initialization/setup.
*
* @param none
*
* @return none
*/
static void SensorTag_init(void)
{
//uint8_t selfTestMap;
// Setup I2C for sensors
//bspI2cInit();
// Handling of buttons, LED, relay
hGpioPin = PIN_open(&pinGpioState, SensortagAppPinTable);
PIN_registerIntCb(hGpioPin, SensorTag_callback);
// ***************************************************************************
// N0 STACK API CALLS CAN OCCUR BEFORE THIS CALL TO ICall_registerApp
// ***************************************************************************
// Register the current thread as an ICall dispatcher application
// so that the application can send and receive messages.
ICall_registerApp(&selfEntity, &sem);
// Create an RTOS queue for message from profile to be sent to app.
appMsgQueue = Util_constructQueue(&appMsg);
// Create one-shot clocks for internal periodic events.
Util_constructClock(&periodicClock, SensorTag_clockHandler,
ST_PERIODIC_EVT_PERIOD, 0, false, ST_PERIODIC_EVT);
// Setup the GAP
GAP_SetParamValue(TGAP_CONN_PAUSE_PERIPHERAL, DEFAULT_CONN_PAUSE_PERIPHERAL);
// Setup the GAP Peripheral Role Profile
{
// For all hardware platforms, device starts advertising upon initialization
uint8_t initialAdvertEnable = TRUE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16_t advertOffTime = 0;
uint8_t enableUpdateRequest = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16_t desiredMinInterval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16_t desiredMaxInterval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16_t desiredSlaveLatency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16_t desiredConnTimeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter(GAPROLE_ADVERT_ENABLED, sizeof(uint8_t),
&initialAdvertEnable);
GAPRole_SetParameter(GAPROLE_ADVERT_OFF_TIME, sizeof(uint16_t),
&advertOffTime);
//Returns 18, but this seems to be normal
GAPRole_SetParameter(GAPROLE_SCAN_RSP_DATA, sizeof(scanRspData),
scanRspData);
//Returns 18
GAPRole_SetParameter(GAPROLE_ADVERT_DATA, sizeof(advertData), advertData);
GAPRole_SetParameter(GAPROLE_PARAM_UPDATE_ENABLE, sizeof(uint8_t),
&enableUpdateRequest);
GAPRole_SetParameter(GAPROLE_MIN_CONN_INTERVAL, sizeof(uint16_t),
&desiredMinInterval);
GAPRole_SetParameter(GAPROLE_MAX_CONN_INTERVAL, sizeof(uint16_t),
&desiredMaxInterval);
GAPRole_SetParameter(GAPROLE_SLAVE_LATENCY, sizeof(uint16_t),
&desiredSlaveLatency);
GAPRole_SetParameter(GAPROLE_TIMEOUT_MULTIPLIER, sizeof(uint16_t),
&desiredConnTimeout);
}
// Set the GAP Characteristics
GGS_SetParameter(GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN,
(void*)attDeviceName);
#ifdef FEATURE_OAD
// Register connection parameter update
GAPRole_RegisterAppCBs( ¶mUpdateCB);
#endif
// Set advertising interval
{
uint16_t advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_LIM_DISC_ADV_INT_MAX, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MIN, advInt);
GAP_SetParamValue(TGAP_GEN_DISC_ADV_INT_MAX, advInt);
}
// Initialize GATT attributes
GGS_AddService(GATT_ALL_SERVICES); // GAP
GATTServApp_AddService(GATT_ALL_SERVICES); // GATT attributes
DevInfo_AddService(); // Device Information Service
// Add application specific device information
SensorTag_setDeviceInfo();
#ifdef FACTORY_IMAGE
// Check if a factory image exists and apply current image if necessary
//if (!SensorTag_hasFactoryImage())
//{
// SensorTag_saveFactoryImage();
//}
#endif
#ifdef FEATURE_REGISTER_SERVICE
//Register_addService(); // Generic register access
//
#endif
#ifdef FEATURE_LCD
SensorTagDisplay_init(); // Display service DevPack LCD
#endif
#ifdef FEATURE_OAD
SensorTagConnectionControl_init(); // Connection control to
// support OAD for iOs/Android
OAD_addService(); // OAD Profile
OAD_register((oadTargetCBs_t *)&simpleBLEPeripheral_oadCBs);
hOadQ = Util_constructQueue(&oadQ);
#endif
// Start the Device
GAPRole_StartDevice(&SensorTag_gapRoleCBs);
// Start Bond Manager
GAPBondMgr_Register(NULL);
// Enable interrupt handling for keys and relay
PIN_registerIntCb(hGpioPin, SensorTag_callback);
}
