static int msContourLayerReadRaster(layerObj *layer, rectObj rect)
{
mapObj *map = layer->map;
char **bands;
char pointer[64], memDSPointer[128];
int band = 1;
double adfGeoTransform[6], adfInvGeoTransform[6];
double llx, lly, urx, ury;
rectObj copyRect, mapRect;
int dst_xsize, dst_ysize;
int virtual_grid_step_x, virtual_grid_step_y;
int src_xoff, src_yoff, src_xsize, src_ysize;
double map_cellsize_x, map_cellsize_y, dst_cellsize_x, dst_cellsize_y;
GDALRasterBandH hBand = NULL;
CPLErr eErr;
contourLayerInfo *clinfo = (contourLayerInfo *) layer->layerinfo;
if (layer->debug)
msDebug("Entering msContourLayerReadRaster().\n");
if (clinfo == NULL || clinfo->hOrigDS == NULL) {
msSetError(MS_MISCERR, "Assertion failed: Contour layer not opened!!!",
"msContourLayerReadRaster()");
return MS_FAILURE;
}
bands = CSLTokenizeStringComplex(
CSLFetchNameValue(layer->processing,"BANDS"), " ,", FALSE, FALSE );
if (CSLCount(bands) > 0) {
band = atoi(bands[0]);
if (band < 1 || band > GDALGetRasterCount(clinfo->hOrigDS)) {
msSetError( MS_IMGERR,
"BANDS PROCESSING directive includes illegal band '%d', should be from 1 to %d.",
"msContourLayerReadRaster()",
band, GDALGetRasterCount(clinfo->hOrigDS));
CSLDestroy(bands);
return MS_FAILURE;
}
}
CSLDestroy(bands);
hBand = GDALGetRasterBand(clinfo->hOrigDS, band);
if (hBand == NULL)
{
msSetError(MS_IMGERR,
"Band %d does not exist on dataset.",
"msContourLayerReadRaster()", band);
return MS_FAILURE;
}
if (layer->projection.numargs > 0 &&
EQUAL(layer->projection.args[0], "auto")) {
const char *wkt;
wkt = GDALGetProjectionRef(clinfo->hOrigDS);
if (wkt != NULL && strlen(wkt) > 0) {
if (msOGCWKT2ProjectionObj(wkt, &(layer->projection),
layer->debug) != MS_SUCCESS) {
char msg[MESSAGELENGTH*2];
errorObj *ms_error = msGetErrorObj();
snprintf( msg, sizeof(msg),
"%s\n"
"PROJECTION AUTO cannot be used for this "
"GDAL raster (`%s').",
ms_error->message, layer->data);
msg[MESSAGELENGTH-1] = '\0';
msSetError(MS_OGRERR, "%s","msDrawRasterLayer()",
msg);
return MS_FAILURE;
}
}
}
/*
* Compute the georeferenced window of overlap, and read the source data
* downsampled to match output resolution, or at full resolution if
* output resolution is lower than the source resolution.
*
* A large portion of this overlap calculation code was borrowed from
* msDrawRasterLayerGDAL().
* Would be possible to move some of this to a reusable function?
*
* Note: This code works only if no reprojection is involved. It would
* need rework to support cases where output projection differs from source
* data file projection.
*/
src_xsize = GDALGetRasterXSize(clinfo->hOrigDS);
src_ysize = GDALGetRasterYSize(clinfo->hOrigDS);
/* set the Dataset extent */
msGetGDALGeoTransform(clinfo->hOrigDS, map, layer, adfGeoTransform);
clinfo->extent.minx = adfGeoTransform[0];
clinfo->extent.maxy = adfGeoTransform[3];
clinfo->extent.maxx = adfGeoTransform[0] + src_xsize * adfGeoTransform[1];
clinfo->extent.miny = adfGeoTransform[3] + src_ysize * adfGeoTransform[5];
if (layer->transform) {
if (layer->debug)
msDebug("msContourLayerReadRaster(): Entering transform.\n");
InvGeoTransform(adfGeoTransform, adfInvGeoTransform);
mapRect = rect;
map_cellsize_x = map_cellsize_y = map->cellsize;
#ifdef USE_PROJ
/* if necessary, project the searchrect to source coords */
if (msProjectionsDiffer( &(map->projection), &(layer->projection))) {
if ( msProjectRect(&map->projection, &layer->projection, &mapRect)
!= MS_SUCCESS ) {
msDebug("msContourLayerReadRaster(%s): unable to reproject map request rectangle into layer projection, canceling.\n", layer->name);
return MS_FAILURE;
}
map_cellsize_x = MS_CELLSIZE(mapRect.minx, mapRect.maxx, map->width);
map_cellsize_y = MS_CELLSIZE(mapRect.miny, mapRect.maxy, map->height);
/* if the projection failed to project the extent requested, we need to
calculate the cellsize to preserve the initial map cellsize ratio */
if ( (mapRect.minx < GEO_TRANS(adfGeoTransform,0,src_ysize)) ||
(mapRect.maxx > GEO_TRANS(adfGeoTransform,src_xsize,0)) ||
(mapRect.miny < GEO_TRANS(adfGeoTransform+3,0,src_ysize)) ||
(mapRect.maxy > GEO_TRANS(adfGeoTransform+3,src_xsize,0)) ) {
int src_unit, dst_unit;
src_unit = GetMapserverUnitUsingProj(&map->projection);
dst_unit = GetMapserverUnitUsingProj(&layer->projection);
if (src_unit == -1 || dst_unit == -1) {
msDebug("msContourLayerReadRaster(%s): unable to reproject map request rectangle into layer projection, canceling.\n", layer->name);
return MS_FAILURE;
}
map_cellsize_x = MS_CONVERT_UNIT(src_unit, dst_unit,
MS_CELLSIZE(rect.minx, rect.maxx, map->width));
map_cellsize_y = MS_CONVERT_UNIT(src_unit, dst_unit,
MS_CELLSIZE(rect.miny, rect.maxy, map->height));
}
}
#endif
if (map_cellsize_x == 0 || map_cellsize_y == 0) {
if (layer->debug)
msDebug("msContourLayerReadRaster(): Cellsize can't be 0.\n");
return MS_FAILURE;
}
/* Adjust MapServer pixel model to GDAL pixel model */
mapRect.minx -= map_cellsize_x*0.5;
mapRect.maxx += map_cellsize_x*0.5;
mapRect.miny -= map_cellsize_y*0.5;
mapRect.maxy += map_cellsize_y*0.5;
/*
* If raw data cellsize (from geotransform) is larger than output map_cellsize
* then we want to extract only enough data to match the output map resolution
* which means that GDAL will automatically sample the data on read.
*
* To prevent bad contour effects on tile edges, we adjust the target cellsize
* to align the extracted window with a virtual grid based on the origin of the
* raw data and a virtual grid step size corresponding to an integer sampling step.
*
* If source data has a greater cellsize (i.e. lower res) that requested ouptut map
* then we use the raw data cellsize as target cellsize since there is no point in
* interpolating the data for contours in this case.
*/
virtual_grid_step_x = (int)floor(map_cellsize_x / ABS(adfGeoTransform[1]));
if (virtual_grid_step_x < 1)
virtual_grid_step_x = 1; /* Do not interpolate data if grid sampling step < 1 */
virtual_grid_step_y = (int)floor(map_cellsize_y / ABS(adfGeoTransform[5]));
if (virtual_grid_step_y < 1)
virtual_grid_step_y = 1; /* Do not interpolate data if grid sampling step < 1 */
/* target cellsize is a multiple of raw data cellsize based on grid step*/
dst_cellsize_x = ABS(adfGeoTransform[1]) * virtual_grid_step_x;
dst_cellsize_y = ABS(adfGeoTransform[5]) * virtual_grid_step_y;
/* Compute overlap between source and target views */
copyRect = mapRect;
if (copyRect.minx < GEO_TRANS(adfGeoTransform,0,src_ysize))
copyRect.minx = GEO_TRANS(adfGeoTransform,0,src_ysize);
if (copyRect.maxx > GEO_TRANS(adfGeoTransform,src_xsize,0))
copyRect.maxx = GEO_TRANS(adfGeoTransform,src_xsize,0);
if (copyRect.miny < GEO_TRANS(adfGeoTransform+3,0,src_ysize))
copyRect.miny = GEO_TRANS(adfGeoTransform+3,0,src_ysize);
if (copyRect.maxy > GEO_TRANS(adfGeoTransform+3,src_xsize,0))
copyRect.maxy = GEO_TRANS(adfGeoTransform+3,src_xsize,0);
if (copyRect.minx >= copyRect.maxx || copyRect.miny >= copyRect.maxy) {
if (layer->debug)
msDebug("msContourLayerReadRaster(): Error in overlap calculation.\n");
return MS_FAILURE;
}
/*
* Convert extraction window to raster coordinates
*/
llx = GEO_TRANS(adfInvGeoTransform+0,copyRect.minx,copyRect.miny);
lly = GEO_TRANS(adfInvGeoTransform+3,copyRect.minx,copyRect.miny);
urx = GEO_TRANS(adfInvGeoTransform+0,copyRect.maxx,copyRect.maxy);
ury = GEO_TRANS(adfInvGeoTransform+3,copyRect.maxx,copyRect.maxy);
/*
* Align extraction window with virtual grid
* (keep in mind raster coordinates origin is at upper-left)
* We also add an extra buffer to fix tile boundarie issues when zoomed
*/
llx = floor(llx / virtual_grid_step_x) * virtual_grid_step_x - (virtual_grid_step_x*5);
urx = ceil(urx / virtual_grid_step_x) * virtual_grid_step_x + (virtual_grid_step_x*5);
ury = floor(ury / virtual_grid_step_y) * virtual_grid_step_y - (virtual_grid_step_x*5);
lly = ceil(lly / virtual_grid_step_y) * virtual_grid_step_y + (virtual_grid_step_x*5);
src_xoff = MAX(0,(int) floor(llx+0.5));
src_yoff = MAX(0,(int) floor(ury+0.5));
src_xsize = MIN(MAX(0,(int) (urx - llx + 0.5)),
GDALGetRasterXSize(clinfo->hOrigDS) - src_xoff);
src_ysize = MIN(MAX(0,(int) (lly - ury + 0.5)),
GDALGetRasterYSize(clinfo->hOrigDS) - src_yoff);
/* Update the geographic extent (buffer added) */
/* TODO: a better way to go the geo_trans */
copyRect.minx = GEO_TRANS(adfGeoTransform+0,src_xoff,0);
copyRect.maxx = GEO_TRANS(adfGeoTransform+0,src_xoff+src_xsize,0);
copyRect.miny = GEO_TRANS(adfGeoTransform+3,0,src_yoff+src_ysize);
copyRect.maxy = GEO_TRANS(adfGeoTransform+3,0,src_yoff);
/*
* If input window is to small then stop here
*/
if (src_xsize < 2 || src_ysize < 2)
{
if (layer->debug)
msDebug("msContourLayerReadRaster(): input window too small, or no apparent overlap between map view and this window(1).\n");
return MS_FAILURE;
}
/* Target buffer size */
dst_xsize = (int)ceil((copyRect.maxx - copyRect.minx) / dst_cellsize_x);
dst_ysize = (int)ceil((copyRect.maxy - copyRect.miny) / dst_cellsize_y);
if (dst_xsize == 0 || dst_ysize == 0) {
if (layer->debug)
msDebug("msContourLayerReadRaster(): no apparent overlap between map view and this window(2).\n");
return MS_FAILURE;
}
if (layer->debug)
msDebug( "msContourLayerReadRaster(): src=%d,%d,%d,%d, dst=%d,%d,%d,%d\n",
src_xoff, src_yoff, src_xsize, src_ysize,
0, 0, dst_xsize, dst_ysize );
} else {
src_xoff = 0;
src_yoff = 0;
dst_xsize = src_xsize = MIN(map->width,src_xsize);
dst_ysize = src_ysize = MIN(map->height,src_ysize);
}
/* -------------------------------------------------------------------- */
/* Allocate buffer, and read data into it. */
/* -------------------------------------------------------------------- */
clinfo->buffer = (double *) malloc(sizeof(double) * dst_xsize * dst_ysize);
if (clinfo->buffer == NULL) {
msSetError(MS_MEMERR, "Malloc(): Out of memory.", "msContourLayerReadRaster()");
return MS_FAILURE;
}
eErr = GDALRasterIO(hBand, GF_Read,
src_xoff, src_yoff, src_xsize, src_ysize,
clinfo->buffer, dst_xsize, dst_ysize, GDT_Float64,
0, 0);
if (eErr != CE_None) {
msSetError( MS_IOERR, "GDALRasterIO() failed: %s",
"msContourLayerReadRaster()", CPLGetLastErrorMsg() );
free(clinfo->buffer);
return MS_FAILURE;
}
memset(pointer, 0, sizeof(pointer));
CPLPrintPointer(pointer, clinfo->buffer, sizeof(pointer));
sprintf(memDSPointer,"MEM:::DATAPOINTER=%s,PIXELS=%d,LINES=%d,BANDS=1,DATATYPE=Float64",
pointer, dst_xsize, dst_ysize);
clinfo->hDS = GDALOpen(memDSPointer, GA_ReadOnly);
if (clinfo->hDS == NULL) {
msSetError(MS_IMGERR,
"Unable to open GDAL Memory dataset.",
"msContourLayerReadRaster()");
free(clinfo->buffer);
return MS_FAILURE;
}
adfGeoTransform[0] = copyRect.minx;
adfGeoTransform[1] = dst_cellsize_x;
adfGeoTransform[2] = 0;
adfGeoTransform[3] = copyRect.maxy;
adfGeoTransform[4] = 0;
adfGeoTransform[5] = -dst_cellsize_y;
clinfo->cellsize = MAX(dst_cellsize_x, dst_cellsize_y);
{
char buf[64];
sprintf(buf, "%lf", clinfo->cellsize);
msInsertHashTable(&layer->metadata, "__data_cellsize__", buf);
}
GDALSetGeoTransform(clinfo->hDS, adfGeoTransform);
return MS_SUCCESS;
}
// Slot called when the menu item is triggered
// If you created more menu items / toolbar buttons in initiGui, you should
// create a separate handler for each action - this single run() method will
// not be enough
void Heatmap::run()
{
HeatmapGui d( mQGisIface->mainWindow(), QgisGui::ModalDialogFlags, &mSessionSettings );
//check that dialog found a suitable vector layer
if ( !d.inputVectorLayer() )
{
mQGisIface->messageBar()->pushMessage( tr( "Layer not found" ), tr( "The heatmap plugin requires at least one point vector layer" ), QgsMessageBar::INFO, mQGisIface->messageTimeout() );
return;
}
if ( d.exec() != QDialog::Accepted )
{
return;
}
QgsVectorLayer* inputLayer = d.inputVectorLayer();
// Get the required data from the dialog
QgsRectangle myBBox = d.bbox();
int columns = d.columns();
int rows = d.rows();
double cellsize = d.cellSizeX(); // or d.cellSizeY(); both have the same value
mDecay = d.decayRatio();
KernelShape kernelShape = d.kernelShape();
OutputValues valueType = d.outputValues();
//is input layer multipoint?
bool isMultiPoint = inputLayer->wkbType() == Qgis::WKBMultiPoint || inputLayer->wkbType() == Qgis::WKBMultiPoint25D;
// Getting the rasterdataset in place
GDALAllRegister();
GDALDriverH myDriver = GDALGetDriverByName( d.outputFormat().toUtf8() );
if ( !myDriver )
{
mQGisIface->messageBar()->pushMessage( tr( "GDAL driver error" ), tr( "Cannot open the driver for the specified format" ), QgsMessageBar::WARNING, mQGisIface->messageTimeout() );
return;
}
double geoTransform[6] = { myBBox.xMinimum(), cellsize, 0, myBBox.yMinimum(), 0, cellsize };
GDALDatasetH emptyDataset = GDALCreate( myDriver, d.outputFilename().toUtf8(), columns, rows, 1, GDT_Float32, nullptr );
GDALSetGeoTransform( emptyDataset, geoTransform );
// Set the projection on the raster destination to match the input layer
GDALSetProjection( emptyDataset, inputLayer->crs().toWkt().toLocal8Bit().data() );
GDALRasterBandH poBand = GDALGetRasterBand( emptyDataset, 1 );
GDALSetRasterNoDataValue( poBand, NO_DATA );
float* line = ( float * ) CPLMalloc( sizeof( float ) * columns );
for ( int i = 0; i < columns ; i++ )
{
line[i] = NO_DATA;
}
// Write the empty raster
for ( int i = 0; i < rows ; i++ )
{
if ( GDALRasterIO( poBand, GF_Write, 0, i, columns, 1, line, columns, 1, GDT_Float32, 0, 0 ) != CE_None )
{
QgsDebugMsg( "Raster IO Error" );
}
}
CPLFree( line );
//close the dataset
GDALClose( emptyDataset );
// open the raster in GA_Update mode
GDALDatasetH heatmapDS = GDALOpen( TO8F( d.outputFilename() ), GA_Update );
if ( !heatmapDS )
{
mQGisIface->messageBar()->pushMessage( tr( "Raster update error" ), tr( "Could not open the created raster for updating. The heatmap was not generated." ), QgsMessageBar::WARNING );
return;
}
poBand = GDALGetRasterBand( heatmapDS, 1 );
QgsAttributeList myAttrList;
int rField = 0;
int wField = 0;
// Handle different radius options
double radius;
double radiusToMapUnits = 1;
int myBuffer = 0;
if ( d.variableRadius() )
{
rField = d.radiusField();
myAttrList.append( rField );
QgsDebugMsg( QString( "Radius Field index received: %1" ).arg( rField ) );
// If not using map units, then calculate a conversion factor to convert the radii to map units
if ( d.radiusUnit() == HeatmapGui::LayerUnits )
{
radiusToMapUnits = mapUnitsOf( 1, inputLayer->crs() );
}
}
else
{
radius = d.radius(); // radius returned by d.radius() is already in map units
myBuffer = bufferSize( radius, cellsize );
}
if ( d.weighted() )
{
wField = d.weightField();
myAttrList.append( wField );
}
// This might have attributes or mightnot have attibutes at all
// based on the variableRadius() and weighted()
QgsFeatureIterator fit = inputLayer->getFeatures( QgsFeatureRequest().setSubsetOfAttributes( myAttrList ) );
int totalFeatures = inputLayer->featureCount();
int counter = 0;
QProgressDialog p( tr( "Rendering heatmap..." ), tr( "Abort" ), 0, totalFeatures, mQGisIface->mainWindow() );
p.setWindowTitle( tr( "QGIS" ) );
p.setWindowModality( Qt::ApplicationModal );
p.show();
QgsFeature myFeature;
while ( fit.nextFeature( myFeature ) )
{
counter++;
p.setValue( counter );
QApplication::processEvents();
if ( p.wasCanceled() )
{
mQGisIface->messageBar()->pushMessage( tr( "Heatmap generation aborted" ), tr( "QGIS will now load the partially-computed raster" ), QgsMessageBar::INFO, mQGisIface->messageTimeout() );
break;
}
const QgsGeometry* featureGeometry = myFeature.constGeometry();
if ( !featureGeometry )
{
continue;
}
// convert the geometry to multipoint
QgsMultiPoint multiPoints;
if ( !isMultiPoint )
{
QgsPoint myPoint = featureGeometry->asPoint();
// avoiding any empty points or out of extent points
if (( myPoint.x() < myBBox.xMinimum() ) || ( myPoint.y() < myBBox.yMinimum() )
|| ( myPoint.x() > myBBox.xMaximum() ) || ( myPoint.y() > myBBox.yMaximum() ) )
{
continue;
}
multiPoints << myPoint;
}
else
{
multiPoints = featureGeometry->asMultiPoint();
}
// If radius is variable then fetch it and calculate new pixel buffer size
if ( d.variableRadius() )
{
radius = myFeature.attribute( rField ).toDouble() * radiusToMapUnits;
myBuffer = bufferSize( radius, cellsize );
}
int blockSize = 2 * myBuffer + 1; //Block SIDE would be more appropriate
double weight = 1.0;
if ( d.weighted() )
{
weight = myFeature.attribute( wField ).toDouble();
}
//loop through all points in multipoint
for ( QgsMultiPoint::const_iterator pointIt = multiPoints.constBegin(); pointIt != multiPoints.constEnd(); ++pointIt )
{
// avoiding any empty points or out of extent points
if ((( *pointIt ).x() < myBBox.xMinimum() ) || (( *pointIt ).y() < myBBox.yMinimum() )
|| (( *pointIt ).x() > myBBox.xMaximum() ) || (( *pointIt ).y() > myBBox.yMaximum() ) )
{
continue;
}
// calculate the pixel position
unsigned int xPosition, yPosition;
xPosition = ((( *pointIt ).x() - myBBox.xMinimum() ) / cellsize ) - myBuffer;
yPosition = ((( *pointIt ).y() - myBBox.yMinimum() ) / cellsize ) - myBuffer;
// get the data
float *dataBuffer = ( float * ) CPLMalloc( sizeof( float ) * blockSize * blockSize );
if ( GDALRasterIO( poBand, GF_Read, xPosition, yPosition, blockSize, blockSize,
dataBuffer, blockSize, blockSize, GDT_Float32, 0, 0 ) != CE_None )
{
QgsDebugMsg( "Raster IO Error" );
}
for ( int xp = 0; xp <= myBuffer; xp++ )
{
for ( int yp = 0; yp <= myBuffer; yp++ )
{
double distance = sqrt( pow( xp, 2.0 ) + pow( yp, 2.0 ) );
// is pixel outside search bandwidth of feature?
if ( distance > myBuffer )
{
continue;
}
double pixelValue = weight * calculateKernelValue( distance, myBuffer, kernelShape, valueType );
// clearing anamolies along the axes
if ( xp == 0 && yp == 0 )
{
pixelValue /= 4;
}
else if ( xp == 0 || yp == 0 )
{
pixelValue /= 2;
}
int pos[4];
pos[0] = ( myBuffer + xp ) * blockSize + ( myBuffer + yp );
pos[1] = ( myBuffer + xp ) * blockSize + ( myBuffer - yp );
pos[2] = ( myBuffer - xp ) * blockSize + ( myBuffer + yp );
pos[3] = ( myBuffer - xp ) * blockSize + ( myBuffer - yp );
for ( int p = 0; p < 4; p++ )
{
if ( dataBuffer[ pos[p] ] == NO_DATA )
{
dataBuffer[ pos[p] ] = 0;
}
dataBuffer[ pos[p] ] += pixelValue;
}
}
}
if ( GDALRasterIO( poBand, GF_Write, xPosition, yPosition, blockSize, blockSize,
dataBuffer, blockSize, blockSize, GDT_Float32, 0, 0 ) != CE_None )
{
QgsDebugMsg( "Raster IO Error" );
}
CPLFree( dataBuffer );
}
}
// Finally close the dataset
GDALClose(( GDALDatasetH ) heatmapDS );
// Open the file in QGIS window if requested
if ( d.addToCanvas() )
{
mQGisIface->addRasterLayer( d.outputFilename(), QFileInfo( d.outputFilename() ).baseName() );
}
}
CPLErr
GDALWarpCutlineMasker( void *pMaskFuncArg, CPL_UNUSED int nBandCount, CPL_UNUSED GDALDataType eType,
int nXOff, int nYOff, int nXSize, int nYSize,
GByte ** /*ppImageData */,
int bMaskIsFloat, void *pValidityMask )
{
GDALWarpOptions *psWO = (GDALWarpOptions *) pMaskFuncArg;
float *pafMask = (float *) pValidityMask;
CPLErr eErr;
GDALDriverH hMemDriver;
if( nXSize < 1 || nYSize < 1 )
return CE_None;
/* -------------------------------------------------------------------- */
/* Do some minimal checking. */
/* -------------------------------------------------------------------- */
if( !bMaskIsFloat )
{
CPLAssert( FALSE );
return CE_Failure;
}
if( psWO == NULL || psWO->hCutline == NULL )
{
CPLAssert( FALSE );
return CE_Failure;
}
hMemDriver = GDALGetDriverByName("MEM");
if (hMemDriver == NULL)
{
CPLError(CE_Failure, CPLE_AppDefined, "GDALWarpCutlineMasker needs MEM driver");
return CE_Failure;
}
/* -------------------------------------------------------------------- */
/* Check the polygon. */
/* -------------------------------------------------------------------- */
OGRGeometryH hPolygon = (OGRGeometryH) psWO->hCutline;
OGREnvelope sEnvelope;
if( wkbFlatten(OGR_G_GetGeometryType(hPolygon)) != wkbPolygon
&& wkbFlatten(OGR_G_GetGeometryType(hPolygon)) != wkbMultiPolygon )
{
CPLAssert( FALSE );
return CE_Failure;
}
OGR_G_GetEnvelope( hPolygon, &sEnvelope );
if( sEnvelope.MaxX + psWO->dfCutlineBlendDist < nXOff
|| sEnvelope.MinX - psWO->dfCutlineBlendDist > nXOff + nXSize
|| sEnvelope.MaxY + psWO->dfCutlineBlendDist < nYOff
|| sEnvelope.MinY - psWO->dfCutlineBlendDist > nYOff + nYSize )
{
// We are far from the blend line - everything is masked to zero.
// It would be nice to realize no work is required for this whole
// chunk!
memset( pafMask, 0, sizeof(float) * nXSize * nYSize );
return CE_None;
}
/* -------------------------------------------------------------------- */
/* Create a byte buffer into which we can burn the */
/* mask polygon and wrap it up as a memory dataset. */
/* -------------------------------------------------------------------- */
GByte *pabyPolyMask = (GByte *) CPLCalloc( nXSize, nYSize );
GDALDatasetH hMemDS;
double adfGeoTransform[6] = { 0.0, 1.0, 0.0, 0.0, 0.0, 1.0 };
char szDataPointer[100];
char *apszOptions[] = { szDataPointer, NULL };
memset( szDataPointer, 0, sizeof(szDataPointer) );
sprintf( szDataPointer, "DATAPOINTER=" );
CPLPrintPointer( szDataPointer+strlen(szDataPointer),
pabyPolyMask,
sizeof(szDataPointer) - strlen(szDataPointer) );
hMemDS = GDALCreate( hMemDriver, "warp_temp",
nXSize, nYSize, 0, GDT_Byte, NULL );
GDALAddBand( hMemDS, GDT_Byte, apszOptions );
GDALSetGeoTransform( hMemDS, adfGeoTransform );
/* -------------------------------------------------------------------- */
/* Burn the polygon into the mask with 1.0 values. */
/* -------------------------------------------------------------------- */
int nTargetBand = 1;
double dfBurnValue = 255.0;
int anXYOff[2];
char **papszRasterizeOptions = NULL;
if( CSLFetchBoolean( psWO->papszWarpOptions, "CUTLINE_ALL_TOUCHED", FALSE ))
papszRasterizeOptions =
CSLSetNameValue( papszRasterizeOptions, "ALL_TOUCHED", "TRUE" );
anXYOff[0] = nXOff;
anXYOff[1] = nYOff;
eErr =
GDALRasterizeGeometries( hMemDS, 1, &nTargetBand,
1, &hPolygon,
CutlineTransformer, anXYOff,
&dfBurnValue, papszRasterizeOptions,
NULL, NULL );
CSLDestroy( papszRasterizeOptions );
// Close and ensure data flushed to underlying array.
GDALClose( hMemDS );
/* -------------------------------------------------------------------- */
/* In the case with no blend distance, we just apply this as a */
/* mask, zeroing out everything outside the polygon. */
/* -------------------------------------------------------------------- */
if( psWO->dfCutlineBlendDist == 0.0 )
{
int i;
for( i = nXSize * nYSize - 1; i >= 0; i-- )
{
if( pabyPolyMask[i] == 0 )
((float *) pValidityMask)[i] = 0.0;
}
}
else
{
eErr = BlendMaskGenerator( nXOff, nYOff, nXSize, nYSize,
pabyPolyMask, (float *) pValidityMask,
hPolygon, psWO->dfCutlineBlendDist );
}
/* -------------------------------------------------------------------- */
/* Clean up. */
/* -------------------------------------------------------------------- */
CPLFree( pabyPolyMask );
return eErr;
}
/* Matlab Gateway routine */
void mexFunction(int nlhs, mxArray *plhs[], int nrhs, const mxArray *prhs[]) {
int nXYSize;
double adfGeoTransform[6] = {0,1,0,0,0,1}, adfDstGeoTransform[6];
char *pszSRS_WKT = NULL;
char **papszWarpOptions = NULL;
GDALDatasetH hSrcDS, hDstDS;
GDALDriverH hDriver;
GDALRasterBandH hBand;
GDALColorTableH hColorTable = NULL;
OGRSpatialReference oSrcSRS, oDstSRS;
GDALResampleAlg interpMethod = GRA_NearestNeighbour;
GDALTransformerFunc pfnTransformer = NULL;
CPLErr eErr;
GDAL_GCP *pasGCPs = NULL;
static int runed_once = FALSE; /* It will be set to true if reaches end of main */
const int *dim_array;
int nx, ny, i, j, m, n, c, nBands, registration = 1;
int n_dims, typeCLASS, nBytes;
char *pszSrcSRS = NULL, *pszSrcWKT = NULL;
char *pszDstSRS = NULL, *pszDstWKT = NULL;
void *in_data;
mxArray *mx_ptr;
unsigned char *tmpByte, *outByte;
unsigned short int *tmpUI16, *outUI16;
short int *tmpI16, *outI16;
int *tmpI32, *outI32;
int nPixels=0, nLines=0, nForceWidth=0, nForceHeight=0;
int nGCPCount = 0, nOrder = 0;
unsigned int *tmpUI32, *outUI32;
float *tmpF32, *outF32;
double *tmpF64, *outF64, *ptr_d;
double dfMinX=0, dfMaxX=0, dfMinY=0, dfMaxY=0, dfResX=0, dfResY=0;
double adfExtent[4];
double dfXRes=0.0, dfYRes=0.0;
double dfWarpMemoryLimit = 0.0;
double *pdfDstNodata = NULL;
char **papszMetadataOptions = NULL;
char *tmp, *txt;
if (nrhs == 2 && mxIsStruct(prhs[1])) {
mx_ptr = mxGetField(prhs[1], 0, "ULx");
if (mx_ptr == NULL)
mexErrMsgTxt("GDALWARP 'ULx' field not provided");
ptr_d = mxGetPr(mx_ptr);
adfGeoTransform[0] = *ptr_d;
mx_ptr = mxGetField(prhs[1], 0, "Xinc");
if (mx_ptr == NULL)
mexErrMsgTxt("GDALWARP 'Xinc' field not provided");
ptr_d = mxGetPr(mx_ptr);
adfGeoTransform[1] = *ptr_d;
mx_ptr = mxGetField(prhs[1], 0, "ULy");
if (mx_ptr == NULL)
mexErrMsgTxt("GDALWARP 'ULy' field not provided");
ptr_d = mxGetPr(mx_ptr);
adfGeoTransform[3] = *ptr_d;
mx_ptr = mxGetField(prhs[1], 0, "Yinc");
if (mx_ptr == NULL)
mexErrMsgTxt("GDALWARP 'Yinc' field not provided");
ptr_d = mxGetPr(mx_ptr);
adfGeoTransform[5] = -*ptr_d;
/* -------- See for resolution requests ------------ */
mx_ptr = mxGetField(prhs[1], 0, "t_size");
if (mx_ptr != NULL) {
ptr_d = mxGetPr(mx_ptr);
if (mxGetN(mx_ptr) == 2) {
nForceWidth = (int)ptr_d[0];
nForceHeight = (int)ptr_d[1];
}
else if (mxGetN(mx_ptr) == 1) { /* pick max(nrow,ncol) */
if (mxGetM(prhs[0]) > getNK(prhs[0],1))
nForceHeight = mxGetM(prhs[0]);
else
nForceWidth = getNK(prhs[0], 1);
}
else {
nForceHeight = mxGetM(prhs[0]);
nForceWidth = getNK(prhs[0], 1);
}
}
mx_ptr = mxGetField(prhs[1], 0, "t_res");
if (mx_ptr != NULL) {
ptr_d = mxGetPr(mx_ptr);
if (mxGetN(mx_ptr) == 2) {
dfXRes = ptr_d[0];
dfYRes = ptr_d[1];
}
else if (mxGetN(mx_ptr) == 1) {
dfXRes = dfYRes = ptr_d[0];
}
}
/* -------------------------------------------------- */
/* -------- Change Warping cache size? ------------ */
mx_ptr = mxGetField(prhs[1], 0, "wm");
if (mx_ptr != NULL) {
ptr_d = mxGetPr(mx_ptr);
dfWarpMemoryLimit = *ptr_d * 1024 * 1024;
}
/* -------------------------------------------------- */
/* -------- Have a nodata value order? -------------- */
mx_ptr = mxGetField(prhs[1], 0, "nodata");
if (mx_ptr != NULL) {
pdfDstNodata = mxGetPr(mx_ptr);
}
/* -------------------------------------------------- */
/* -------- See for projection stuff ---------------- */
mx_ptr = mxGetField(prhs[1], 0, "SrcProjSRS");
if (mx_ptr != NULL)
pszSrcSRS = (char *)mxArrayToString(mx_ptr);
mx_ptr = mxGetField(prhs[1], 0, "SrcProjWKT");
if (mx_ptr != NULL)
pszSrcWKT = (char *)mxArrayToString(mx_ptr);
mx_ptr = mxGetField(prhs[1], 0, "DstProjSRS");
if (mx_ptr != NULL)
pszDstSRS = (char *)mxArrayToString(mx_ptr);
mx_ptr = mxGetField(prhs[1], 0, "DstProjWKT");
if (mx_ptr != NULL)
pszDstWKT = (char *)mxArrayToString(mx_ptr);
/* -------------------------------------------------- */
/* -------- Do we have GCPs? ----------------------- */
mx_ptr = mxGetField(prhs[1], 0, "gcp");
if (mx_ptr != NULL) {
nGCPCount = mxGetM(mx_ptr);
if (mxGetN(mx_ptr) != 4)
mexErrMsgTxt("GDALWARP: GCPs must be a Mx4 array");
ptr_d = mxGetPr(mx_ptr);
pasGCPs = (GDAL_GCP *) mxCalloc( nGCPCount, sizeof(GDAL_GCP) );
GDALInitGCPs( 1, pasGCPs + nGCPCount - 1 );
for (i = 0; i < nGCPCount; i++) {
pasGCPs[i].dfGCPPixel = ptr_d[i];
pasGCPs[i].dfGCPLine = ptr_d[i+nGCPCount];
pasGCPs[i].dfGCPX = ptr_d[i+2*nGCPCount];
pasGCPs[i].dfGCPY = ptr_d[i+3*nGCPCount];
pasGCPs[i].dfGCPZ = 0;
}
}
/* ---- Have we an order request? --- */
mx_ptr = mxGetField(prhs[1], 0, "order");
if (mx_ptr != NULL) {
ptr_d = mxGetPr(mx_ptr);
nOrder = (int)*ptr_d;
if (nOrder != -1 || nOrder != 0 || nOrder != 1 || nOrder != 2 || nOrder != 3)
nOrder = 0;
}
/* -------------------------------------------------- */
mx_ptr = mxGetField(prhs[1], 0, "ResampleAlg");
if (mx_ptr != NULL) {
txt = (char *)mxArrayToString(mx_ptr);
if (!strcmp(txt,"nearest"))
interpMethod = GRA_NearestNeighbour;
else if (!strcmp(txt,"bilinear"))
interpMethod = GRA_Bilinear;
else if (!strcmp(txt,"cubic") || !strcmp(txt,"bicubic"))
interpMethod = GRA_Cubic;
else if (!strcmp(txt,"spline"))
interpMethod = GRA_CubicSpline;
}
/* If grid limits were in grid registration, convert them to pixel reg */
mx_ptr = mxGetField(prhs[1], 0, "Reg");
if (mx_ptr != NULL) {
ptr_d = mxGetPr(mx_ptr);
registration = (int)ptr_d[0];
}
if (registration == 0) {
adfGeoTransform[0] -= adfGeoTransform[1]/2.;
adfGeoTransform[3] -= adfGeoTransform[5]/2.;
}
}
else {
mexPrintf("Usage: B = gdalwarp_mex(IMG,HDR_STRUCT)\n\n");
mexPrintf("\tIMG -> is a Mx2 or Mx3 array with an grid/image data to reproject\n");
mexPrintf("\tHDR_STRUCT -> is a structure with the following fields:\n");
mexPrintf("\t\t'ULx' X coordinate of the uper left corner\n");
mexPrintf("\t\t'ULy' Y coordinate of the uper left corner\n");
mexPrintf("\t\t'Xinc' distance between columns in target grid/image coordinates\n");
mexPrintf("\t\t'Yinc' distance between rows in target grid/image coordinates\n");
mexPrintf("\t\t'SrcProjSRS', 'SrcProjWKT' -> Source projection string\n");
mexPrintf("\t\t'DstProjSRS', 'DstProjWKT' -> Target projection string\n");
mexPrintf("\t\t\tSRS stands for a string of the type used by proj4\n");
mexPrintf("\t\t\tWKT stands for a string on the 'Well Known Text' format\n\n");
mexPrintf("\t\t\tIf one of the Src or Dst fields is absent a GEOGRAPHIC WGS84 is assumed\n");
mexPrintf("\nOPTIONS\n");
mexPrintf("\t\t'gcp' a [Mx4] array with Ground Control Points\n");
mexPrintf("\t\t't_size' a [width height] vector to set output file size in pixels\n");
mexPrintf("\t\t't_res' a [xres yres] vector to set output file resolution (in target georeferenced units)\n");
mexPrintf("\t\t'wm' amount of memory (in megabytes) that the warp API is allowed to use for caching\n");
mexPrintf("\t\t'nodata' Set nodata values for output bands.\n");
mexPrintf("\t\t'ResampleAlg' To set up the algorithm used during warp operation. Options are: \n");
mexPrintf("\t\t\t'nearest' Use nearest neighbour resampling (default, fastest algorithm, worst interpolation quality).\n");
mexPrintf("\t\t\t'bilinear' Use bilinear resampling.\n");
mexPrintf("\t\t\t'cubic' Use cubic resampling.\n");
mexPrintf("\t\t\t'spline' Use cubic spline resampling.\n\n");
if (!runed_once) /* Do next call only at first time this MEX is loaded */
GDALAllRegister();
mexPrintf( "The following format drivers are configured and support Create() method:\n" );
for( i = 0; i < GDALGetDriverCount(); i++ ) {
hDriver = GDALGetDriver(i);
if( GDALGetMetadataItem( hDriver, GDAL_DCAP_CREATE, NULL ) != NULL)
mexPrintf("%s: %s\n", GDALGetDriverShortName(hDriver),
GDALGetDriverLongName(hDriver));
}
return;
}
n_dims = mxGetNumberOfDimensions(prhs[0]);
dim_array=mxGetDimensions(prhs[0]);
ny = dim_array[0];
nx = dim_array[1];
nBands = dim_array[2];
if (n_dims == 2) /* Otherwise it would stay undefined */
nBands = 1;
/* Find out in which data type was given the input array */
if (mxIsUint8(prhs[0])) {
typeCLASS = GDT_Byte; nBytes = 1;
outByte = (unsigned char *)mxMalloc (nx*ny * sizeof(unsigned char));
}
else if (mxIsUint16(prhs[0])) {
typeCLASS = GDT_UInt16; nBytes = 2;
outUI16 = (unsigned short int *)mxMalloc (nx*ny * sizeof(short int));
}
else if (mxIsInt16(prhs[0])) {
typeCLASS = GDT_Int16; nBytes = 2;
outI16 = (short int *)mxMalloc (nx*ny * sizeof(short int));
}
else if (mxIsInt32(prhs[0])) {
typeCLASS = GDT_Int32; nBytes = 4;
outI32 = (int *)mxMalloc (nx*ny * sizeof(int));
}
else if (mxIsUint32(prhs[0])) {
typeCLASS = GDT_UInt32; nBytes = 4;
outUI32 = (unsigned int *)mxMalloc (nx*ny * sizeof(int));
}
else if (mxIsSingle(prhs[0])) {
typeCLASS = GDT_Float32; nBytes = 4;
outF32 = (float *)mxMalloc (nx*ny * sizeof(float));
}
else if (mxIsDouble(prhs[0])) {
typeCLASS = GDT_Float64; nBytes = 8;
outF64 = (double *)mxMalloc (nx*ny * sizeof(double));
}
else
mexErrMsgTxt("GDALWARP Unknown input data class!");
in_data = (void *)mxGetData(prhs[0]);
if (!runed_once) /* Do next call only at first time this MEX is loaded */
GDALAllRegister();
hDriver = GDALGetDriverByName( "MEM" );
hSrcDS = GDALCreate( hDriver, "mem", nx, ny, nBands, (GDALDataType)typeCLASS, NULL );
if (hSrcDS == NULL) {
mexPrintf ("GDALOpen failed - %d\n%s\n", CPLGetLastErrorNo(), CPLGetLastErrorMsg());
return;
}
GDALSetGeoTransform( hSrcDS, adfGeoTransform );
/* ---------- Set the Source projection ---------------------------- */
/* If it was not provided assume it is Geog WGS84 */
if (pszSrcSRS == NULL && pszSrcWKT == NULL)
oSrcSRS.SetWellKnownGeogCS( "WGS84" );
else if (pszSrcWKT != NULL)
oSrcSRS.importFromWkt( &pszSrcWKT );
else {
if( oSrcSRS.SetFromUserInput( pszSrcSRS ) != OGRERR_NONE )
mexErrMsgTxt("GDAL_WARP_MEX: Translating source SRS failed.");
}
if (pszSrcWKT == NULL)
oSrcSRS.exportToWkt( &pszSrcWKT );
GDALSetProjection( hSrcDS, pszSrcWKT );
//pszSrcWKT = (char *)GDALGetProjectionRef( hSrcDS );
CPLAssert( pszSrcWKT != NULL && strlen(pszSrcWKT) > 0 );
/* ------------------------------------------------------------------ */
/* -------------- Copy input data into the hSrcDS dataset ----------- */
for (i = 1; i <= nBands; i++) {
hBand = GDALGetRasterBand( hSrcDS, i );
nXYSize = (i-1)*nx*ny;
switch( typeCLASS ) {
case GDT_Byte:
tmpByte = (unsigned char *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outByte[c++] = tmpByte[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outByte, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_UInt16:
tmpUI16 = (unsigned short int *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outUI16[c++] = tmpUI16[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outUI16, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_Int16:
tmpI16 = (short int *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outI16[c++] = tmpI16[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outI16, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_UInt32:
tmpUI32 = (unsigned int *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outUI32[c++] = tmpUI32[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outUI32, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_Int32:
tmpI32 = (int *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outI32[c++] = tmpI32[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outI32, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_Float32:
tmpF32 = (float *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outF32[c++] = tmpF32[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outF32, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
case GDT_Float64:
tmpF64 = (double *)in_data;
for (m = ny-1, c = 0; m >= 0; m--) for (n = 0; n < nx; n++)
outF64[c++] = tmpF64[m + n*ny + nXYSize];
GDALRasterIO( hBand, GF_Write, 0, 0, nx, ny,outF64, nx, ny, (GDALDataType)typeCLASS, 0, 0 );
break;
}
}
/* ---------- Set up the Target coordinate system ------------------- */
/* If it was not provided assume it is Geog WGS84 */
CPLErrorReset();
if (pszDstSRS == NULL && pszDstWKT == NULL)
oDstSRS.SetWellKnownGeogCS( "WGS84" );
else if (pszDstWKT != NULL)
oDstSRS.importFromWkt( &pszDstWKT );
else {
if( oDstSRS.SetFromUserInput( pszDstSRS ) != OGRERR_NONE )
mexErrMsgTxt("GDAL_WARP_MEX: Translating target SRS failed.");
}
if (pszDstWKT == NULL)
oDstSRS.exportToWkt( &pszDstWKT );
/* ------------------------------------------------------------------ */
if ( nGCPCount != 0 ) {
if (GDALSetGCPs(hSrcDS, nGCPCount, pasGCPs, "") != CE_None)
mexPrintf("GDALWARP WARNING: writing GCPs failed.\n");
}
/* Create a transformer that maps from source pixel/line coordinates
to destination georeferenced coordinates (not destination pixel line)
We do that by omitting the destination dataset handle (setting it to NULL). */
void *hTransformArg;
hTransformArg = GDALCreateGenImgProjTransformer(hSrcDS, pszSrcWKT, NULL, pszDstWKT,
nGCPCount == 0 ? FALSE : TRUE, 0, nOrder);
if( hTransformArg == NULL )
mexErrMsgTxt("GDALTRANSFORM: Generating transformer failed.");
GDALTransformerInfo *psInfo = (GDALTransformerInfo*)hTransformArg;
/* -------------------------------------------------------------------------- */
/* Get approximate output georeferenced bounds and resolution for file
/* -------------------------------------------------------------------------- */
if (GDALSuggestedWarpOutput2(hSrcDS, GDALGenImgProjTransform, hTransformArg,
adfDstGeoTransform, &nPixels, &nLines, adfExtent,
0) != CE_None ) {
GDALClose(hSrcDS);
mexErrMsgTxt("GDALWARP: GDALSuggestedWarpOutput2 failed.");
}
if (CPLGetConfigOption( "CHECK_WITH_INVERT_PROJ", NULL ) == NULL) {
double MinX = adfExtent[0];
double MaxX = adfExtent[2];
double MaxY = adfExtent[3];
double MinY = adfExtent[1];
int bSuccess = TRUE;
/* Check that the the edges of the target image are in the validity area */
/* of the target projection */
#define N_STEPS 20
for (i = 0; i <= N_STEPS && bSuccess; i++) {
for (j = 0; j <= N_STEPS && bSuccess; j++) {
double dfRatioI = i * 1.0 / N_STEPS;
double dfRatioJ = j * 1.0 / N_STEPS;
double expected_x = (1 - dfRatioI) * MinX + dfRatioI * MaxX;
double expected_y = (1 - dfRatioJ) * MinY + dfRatioJ * MaxY;
double x = expected_x;
double y = expected_y;
double z = 0;
/* Target SRS coordinates to source image pixel coordinates */
if (!psInfo->pfnTransform(hTransformArg, TRUE, 1, &x, &y, &z, &bSuccess) || !bSuccess)
bSuccess = FALSE;
/* Source image pixel coordinates to target SRS coordinates */
if (!psInfo->pfnTransform(hTransformArg, FALSE, 1, &x, &y, &z, &bSuccess) || !bSuccess)
bSuccess = FALSE;
if (fabs(x - expected_x) > (MaxX - MinX) / nPixels ||
fabs(y - expected_y) > (MaxY - MinY) / nLines)
bSuccess = FALSE;
}
}
/* If not, retry with CHECK_WITH_INVERT_PROJ=TRUE that forces ogrct.cpp */
/* to check the consistency of each requested projection result with the */
/* invert projection */
if (!bSuccess) {
CPLSetConfigOption( "CHECK_WITH_INVERT_PROJ", "TRUE" );
CPLDebug("WARP", "Recompute out extent with CHECK_WITH_INVERT_PROJ=TRUE");
if (GDALSuggestedWarpOutput2(hSrcDS, GDALGenImgProjTransform, hTransformArg,
adfDstGeoTransform, &nPixels, &nLines, adfExtent,
0) != CE_None ) {
GDALClose(hSrcDS);
mexErrMsgTxt("GDALWARO: GDALSuggestedWarpOutput2 failed.");
}
}
}
/* -------------------------------------------------------------------- */
/* Expand the working bounds to include this region, ensure the */
/* working resolution is no more than this resolution. */
/* -------------------------------------------------------------------- */
if( dfMaxX == 0.0 && dfMinX == 0.0 ) {
dfMinX = adfExtent[0];
dfMaxX = adfExtent[2];
dfMaxY = adfExtent[3];
dfMinY = adfExtent[1];
dfResX = adfDstGeoTransform[1];
dfResY = ABS(adfDstGeoTransform[5]);
}
else {
dfMinX = MIN(dfMinX,adfExtent[0]);
dfMaxX = MAX(dfMaxX,adfExtent[2]);
dfMaxY = MAX(dfMaxY,adfExtent[3]);
dfMinY = MIN(dfMinY,adfExtent[1]);
dfResX = MIN(dfResX,adfDstGeoTransform[1]);
dfResY = MIN(dfResY,ABS(adfDstGeoTransform[5]));
}
GDALDestroyGenImgProjTransformer( hTransformArg );
/* -------------------------------------------------------------------- */
/* Turn the suggested region into a geotransform and suggested */
/* number of pixels and lines. */
/* -------------------------------------------------------------------- */
adfDstGeoTransform[0] = dfMinX;
adfDstGeoTransform[1] = dfResX;
adfDstGeoTransform[2] = 0.0;
adfDstGeoTransform[3] = dfMaxY;
adfDstGeoTransform[4] = 0.0;
adfDstGeoTransform[5] = -1 * dfResY;
nPixels = (int) ((dfMaxX - dfMinX) / dfResX + 0.5);
nLines = (int) ((dfMaxY - dfMinY) / dfResY + 0.5);
/* -------------------------------------------------------------------- */
/* Did the user override some parameters? */
/* -------------------------------------------------------------------- */
if( dfXRes != 0.0 && dfYRes != 0.0 ) {
dfMinX = adfDstGeoTransform[0];
dfMaxX = adfDstGeoTransform[0] + adfDstGeoTransform[1] * nPixels;
dfMaxY = adfDstGeoTransform[3];
dfMinY = adfDstGeoTransform[3] + adfDstGeoTransform[5] * nLines;
nPixels = (int) ((dfMaxX - dfMinX + (dfXRes/2.0)) / dfXRes);
nLines = (int) ((dfMaxY - dfMinY + (dfYRes/2.0)) / dfYRes);
adfDstGeoTransform[0] = dfMinX;
adfDstGeoTransform[3] = dfMaxY;
adfDstGeoTransform[1] = dfXRes;
adfDstGeoTransform[5] = -dfYRes;
}
else if( nForceWidth != 0 && nForceHeight != 0 ) {
dfXRes = (dfMaxX - dfMinX) / nForceWidth;
dfYRes = (dfMaxY - dfMinY) / nForceHeight;
adfDstGeoTransform[0] = dfMinX;
adfDstGeoTransform[3] = dfMaxY;
adfDstGeoTransform[1] = dfXRes;
adfDstGeoTransform[5] = -dfYRes;
nPixels = nForceWidth;
nLines = nForceHeight;
}
else if( nForceWidth != 0) {
dfXRes = (dfMaxX - dfMinX) / nForceWidth;
dfYRes = dfXRes;
adfDstGeoTransform[0] = dfMinX;
adfDstGeoTransform[3] = dfMaxY;
adfDstGeoTransform[1] = dfXRes;
adfDstGeoTransform[5] = -dfYRes;
nPixels = nForceWidth;
nLines = (int) ((dfMaxY - dfMinY + (dfYRes/2.0)) / dfYRes);
}
else if( nForceHeight != 0) {
dfYRes = (dfMaxY - dfMinY) / nForceHeight;
dfXRes = dfYRes;
adfDstGeoTransform[0] = dfMinX;
adfDstGeoTransform[3] = dfMaxY;
adfDstGeoTransform[1] = dfXRes;
adfDstGeoTransform[5] = -dfYRes;
nPixels = (int) ((dfMaxX - dfMinX + (dfXRes/2.0)) / dfXRes);
nLines = nForceHeight;
}
/* --------------------- Create the output --------------------------- */
hDstDS = GDALCreate( hDriver, "mem", nPixels, nLines,
GDALGetRasterCount(hSrcDS), (GDALDataType)typeCLASS, NULL );
CPLAssert( hDstDS != NULL );
/* -------------- Write out the projection definition ---------------- */
GDALSetProjection( hDstDS, pszDstWKT );
GDALSetGeoTransform( hDstDS, adfDstGeoTransform );
/* --------------------- Setup warp options -------------------------- */
GDALWarpOptions *psWO = GDALCreateWarpOptions();
psWO->hSrcDS = hSrcDS;
psWO->hDstDS = hDstDS;
psWO->nBandCount = nBands;
psWO->panSrcBands = (int *) CPLMalloc(psWO->nBandCount * sizeof(int) );
psWO->panDstBands = (int *) CPLMalloc(psWO->nBandCount * sizeof(int) );
for( i = 0; i < nBands; i++ ) {
psWO->panSrcBands[i] = i+1;
psWO->panDstBands[i] = i+1;
}
if( dfWarpMemoryLimit != 0.0 )
psWO->dfWarpMemoryLimit = dfWarpMemoryLimit;
/* --------------------- Setup the Resampling Algo ------------------- */
psWO->eResampleAlg = interpMethod;
/* --------------------- Setup NODATA options ------------------------ */
papszWarpOptions = CSLSetNameValue(papszWarpOptions, "INIT_DEST", "NO_DATA" );
if ( pdfDstNodata == NULL && (typeCLASS == GDT_Float32 || typeCLASS == GDT_Float64) ) {
pdfDstNodata = (double *) mxCalloc((size_t)1, sizeof(double));
*pdfDstNodata = mxGetNaN();
}
else if (pdfDstNodata != NULL) {
#define CLAMP(val,type,minval,maxval) \
do { if (val < minval) { val = minval; } \
else if (val > maxval) { val = maxval; } \
else if (val != (type)val) { val = (type)(val + 0.5); } } \
while(0)
switch( typeCLASS ) {
case GDT_Byte:
CLAMP(pdfDstNodata[0], GByte, 0.0, 255.0);
break;
case GDT_UInt16:
CLAMP(pdfDstNodata[0], GInt16, -32768.0, 32767.0);
break;
case GDT_Int16:
CLAMP(pdfDstNodata[0], GUInt16, 0.0, 65535.0);
break;
case GDT_UInt32:
CLAMP(pdfDstNodata[0], GInt32, -2147483648.0, 2147483647.0);
break;
case GDT_Int32:
CLAMP(pdfDstNodata[0], GUInt32, 0.0, 4294967295.0);
break;
default:
break;
}
}
psWO->papszWarpOptions = CSLDuplicate(papszWarpOptions);
if (pdfDstNodata != NULL) {
psWO->padfDstNoDataReal = (double *) CPLMalloc(psWO->nBandCount*sizeof(double));
psWO->padfDstNoDataImag = (double *) CPLMalloc(psWO->nBandCount*sizeof(double));
for (i = 0; i < nBands; i++) {
psWO->padfDstNoDataReal[i] = pdfDstNodata[0];
psWO->padfDstNoDataImag[i] = 0.0;
GDALSetRasterNoDataValue( GDALGetRasterBand(hDstDS, i+1), pdfDstNodata[0]);
}
}
/* ------------ Establish reprojection transformer ------------------- */
psWO->pTransformerArg = GDALCreateGenImgProjTransformer( hSrcDS, GDALGetProjectionRef(hSrcDS),
hDstDS, GDALGetProjectionRef(hDstDS),
nGCPCount == 0 ? FALSE : TRUE, 0.0, nOrder );
psWO->pfnTransformer = GDALGenImgProjTransform;
/* ----------- Initialize and execute the warp operation ------------- */
GDALWarpOperation oOperation;
oOperation.Initialize( psWO );
eErr = oOperation.ChunkAndWarpImage( 0, 0, GDALGetRasterXSize( hDstDS ),
GDALGetRasterYSize( hDstDS ) );
CPLAssert( eErr == CE_None );
GDALDestroyGenImgProjTransformer( psWO->pTransformerArg );
GDALDestroyWarpOptions( psWO );
GDALClose( hSrcDS );
/* ------------ Free memory used to fill the hSrcDS dataset ---------- */
switch( typeCLASS ) {
case GDT_Byte: mxFree((void *)outByte); break;
case GDT_UInt16: mxFree((void *)outUI16); break;
case GDT_Int16: mxFree((void *)outI16); break;
case GDT_UInt32: mxFree((void *)outUI32); break;
case GDT_Int32: mxFree((void *)outI32); break;
case GDT_Float32: mxFree((void *)outF32); break;
case GDT_Float64: mxFree((void *)outF64); break;
}
int out_dims[3];
out_dims[0] = nLines;
out_dims[1] = nPixels;
out_dims[2] = nBands;
plhs[0] = mxCreateNumericArray (n_dims,out_dims,mxGetClassID(prhs[0]), mxREAL);
tmp = (char *)mxCalloc(nPixels * nLines, nBytes);
/* ------ Allocate memory to be used in filling the hDstDS dataset ---- */
switch( typeCLASS ) {
case GDT_Byte:
outByte = (unsigned char *)mxGetData(plhs[0]); break;
case GDT_UInt16:
outUI16 = (unsigned short int *)mxGetData(plhs[0]); break;
case GDT_Int16:
outI16 = (short int *)mxGetData(plhs[0]); break;
case GDT_UInt32:
outUI32 = (unsigned int *)mxGetData(plhs[0]); break;
case GDT_Int32:
outI32 = (int *)mxGetData(plhs[0]); break;
case GDT_Float32:
outF32 = (float *)mxGetData(plhs[0]); break;
case GDT_Float64:
outF64 = (double *)mxGetData(plhs[0]); break;
}
/* ----------- Copy the output hSrcDS dataset data into plhs ---------- */
for (i = 1; i <= nBands; i++) {
hBand = GDALGetRasterBand( hDstDS, i );
GDALRasterIO( hBand, GF_Read, 0, 0, nPixels, nLines, tmp, nPixels, nLines,
(GDALDataType)typeCLASS, 0, 0 );
nXYSize = (i-1) * nPixels * nLines;
switch( typeCLASS ) {
case GDT_Byte:
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outByte[m + n*nLines + nXYSize] = tmp[c++];
break;
case GDT_UInt16:
tmpUI16 = (GUInt16 *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outUI16[m + n*nLines + nXYSize] = tmpUI16[c++];
break;
case GDT_Int16:
tmpI16 = (GInt16 *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outI16[m + n*nLines + nXYSize] = tmpI16[c++];
break;
case GDT_UInt32:
tmpUI32 = (GUInt32 *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outUI32[m + n*nLines + nXYSize] = tmpUI32[c++];
break;
case GDT_Int32:
tmpI32 = (GInt32 *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outI32[m + n*nLines + nXYSize] = tmpI32[c++];
break;
case GDT_Float32:
tmpF32 = (float *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outF32[m + n*nLines + nXYSize] = tmpF32[c++];
break;
case GDT_Float64:
tmpF64 = (double *) tmp;
for (m = nLines-1, c = 0; m >= 0; m--) for (n = 0; n < nPixels; n++)
outF64[m + n*nLines + nXYSize] = tmpF64[c++];
break;
}
}
mxFree(tmp);
if (nGCPCount) {
GDALDeinitGCPs( nGCPCount, pasGCPs ); /* makes this mex crash in the next call - Is it still true??? */
mxFree((void *) pasGCPs );
}
if (nlhs == 2)
plhs[1] = populate_metadata_struct (hDstDS, 1);
runed_once = TRUE; /* Signals that next call won't need to call GDALAllRegister() again */
/*GDALDestroyDriverManager();
OGRFree(pszDstWKT);*/
GDALClose( hDstDS );
CSLDestroy( papszWarpOptions );
if (pszDstWKT && strlen(pszDstWKT) > 1 ) OGRFree(pszDstWKT);
if (pszSrcWKT && strlen(pszSrcWKT) > 1 ) OGRFree(pszSrcWKT);
}
