/*
* Draw (on m_panelShowPin) the pin currently edited
* accroding to current settings in dialog
*/
void DIALOG_LIB_EDIT_PIN::OnPaintShowPanel( wxPaintEvent& event )
{
wxPaintDC dc( m_panelShowPin );
wxSize dc_size = dc.GetSize();
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Give a parent to m_dummyPin only from draw purpose.
// In fact m_dummyPin should not have a parent, but draw functions need a parent
// to know some options, about pin texts
LIB_EDIT_FRAME* libframe = (LIB_EDIT_FRAME*) GetParent();
m_dummyPin->SetParent( libframe->GetComponent() );
// Calculate a suitable scale to fit the available draw area
EDA_RECT bBox = m_dummyPin->GetBoundingBox();
double xscale = (double) dc_size.x / bBox.GetWidth();
double yscale = (double) dc_size.y / bBox.GetHeight();
double scale = std::min( xscale, yscale );
// Give a 10% margin
scale *= 0.9;
dc.SetUserScale( scale, scale );
wxPoint offset = bBox.Centre();
NEGATE( offset.x );
NEGATE( offset.y );
GRResetPenAndBrush( &dc );
m_dummyPin->Draw( NULL, &dc, offset, UNSPECIFIED_COLOR, GR_COPY,
NULL, DefaultTransform );
m_dummyPin->SetParent(NULL);
event.Skip();
}
void WinEDA_DrawPanel::PrepareGraphicContext(wxDC * DC)
/******************************************************/
{
DC->SetPen(*DrawPen);
DC->SetBrush(*DrawBrush);
GRResetPenAndBrush(DC);
DC->SetBackgroundMode(wxTRANSPARENT);
#ifdef WX_ZOOM
int zoom = GetZoom();
double f_scale = 1.0/(double)zoom;
DC->SetUserScale(f_scale, f_scale);
PrepareDC(*DC);
#endif
SetBoundaryBox();
}
void EDA_DRAW_PANEL::DoPrepareDC( wxDC& dc )
{
wxScrolledWindow::DoPrepareDC( dc );
if( GetScreen() != NULL )
{
double scale = GetScreen()->GetScalingFactor();
dc.SetUserScale( scale, scale );
wxPoint pt = GetScreen()->m_DrawOrg;
dc.SetLogicalOrigin( pt.x, pt.y );
}
SetClipBox( dc ); // Reset the clip box to the entire screen.
GRResetPenAndBrush( &dc );
dc.SetBackgroundMode( wxTRANSPARENT );
}
void WinEDA_DrawPanel::ReDraw(wxDC * DC, bool erasebg)
/****************************************************/
{
BASE_SCREEN * Screen = GetScreen();
if ( Screen == NULL ) return;
if ( (g_DrawBgColor != WHITE) && (g_DrawBgColor != BLACK) ) g_DrawBgColor = BLACK;
if(g_DrawBgColor == WHITE)
{
g_XorMode = GR_NXOR;
g_GhostColor = BLACK;
}
else
{
g_XorMode = GR_XOR;
g_GhostColor = WHITE;
}
#ifdef WX_ZOOM
int zoom = GetZoom();
double f_scale = 1.0/(double)zoom;
DC->SetUserScale(f_scale, f_scale);
#endif
if(erasebg) PrepareGraphicContext(DC);
DC->SetFont(* g_StdFont);
DC->BeginDrawing();
SetBackgroundColour(wxColour(ColorRefs[g_DrawBgColor].m_Red,
ColorRefs[g_DrawBgColor].m_Green,
ColorRefs[g_DrawBgColor].m_Blue ));
GRResetPenAndBrush(DC);
DC->SetBackground(*wxBLACK_BRUSH );
DC->SetBackgroundMode(wxTRANSPARENT);
m_Parent->RedrawActiveWindow(DC, erasebg);
DC->EndDrawing();
}
void EDA_DRAW_PANEL::ReDraw( wxDC* DC, bool erasebg )
{
BASE_SCREEN* Screen = GetScreen();
if( Screen == NULL )
return;
EDA_COLOR_T bgColor = GetParent()->GetDrawBgColor();
if( ( bgColor != WHITE ) && ( bgColor != BLACK ) )
bgColor = BLACK;
if( bgColor == WHITE )
{
g_XorMode = GR_NXOR;
g_GhostColor = BLACK;
}
else
{
g_XorMode = GR_XOR;
g_GhostColor = WHITE;
}
GRResetPenAndBrush( DC );
DC->SetBackground( bgColor == BLACK ? *wxBLACK_BRUSH : *wxWHITE_BRUSH );
DC->SetBackgroundMode( wxSOLID );
if( erasebg )
EraseScreen( DC );
GetParent()->RedrawActiveWindow( DC, erasebg );
// Verfies that the clipping is working correctly. If these two sets of numbers are
// not the same or really close. The clipping algorithms are broken.
wxLogTrace( KICAD_TRACE_COORDS,
wxT( "Clip box: (%d, %d, %d, %d), Draw extents (%d, %d, %d, %d)" ),
m_ClipBox.GetX(), m_ClipBox.GetY(), m_ClipBox.GetRight(), m_ClipBox.GetBottom(),
DC->MinX(), DC->MinY(), DC->MaxX(), DC->MaxY() );
}
void EDA_DRAW_PANEL::ReDraw( wxDC* DC, bool erasebg )
{
BASE_SCREEN* Screen = GetScreen();
if( Screen == NULL )
return;
COLOR4D bgColor = GetParent()->GetDrawBgColor();
// TODO(JE): Is this correct?
if( bgColor.GetBrightness() > 0.5 )
{
g_XorMode = GR_NXOR;
g_GhostColor = BLACK;
}
else
{
g_XorMode = GR_XOR;
g_GhostColor = WHITE;
}
GRResetPenAndBrush( DC );
DC->SetBackground( wxBrush( bgColor.ToColour() ) );
DC->SetBackgroundMode( wxSOLID );
if( erasebg )
EraseScreen( DC );
GetParent()->RedrawActiveWindow( DC, erasebg );
// Verfies that the clipping is working correctly. If these two sets of numbers are
// not the same or really close. The clipping algorithms are broken.
wxLogTrace( kicadTraceCoords,
wxT( "Clip box: (%d, %d, %d, %d), Draw extents (%d, %d, %d, %d)" ),
m_ClipBox.GetX(), m_ClipBox.GetY(), m_ClipBox.GetRight(), m_ClipBox.GetBottom(),
DC->MinX(), DC->MinY(), DC->MaxX(), DC->MaxY() );
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
#if defined (PCBNEW)
BOARD * brd = ((PCB_BASE_FRAME*) m_Parent)->GetBoard();
boardBoundingBox = brd->ComputeBoundingBox();
wxString titleblockFilename = brd->GetFileName();
#elif defined (GERBVIEW)
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
#else
#error BOARD_PRINTOUT_CONTROLLER::DrawPage() works only for PCBNEW or GERBVIEW
#endif
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
wxLogTrace( tracePrinting, wxT( "Drawing bounding box: x=%d, y=%d, w=%d, h=%d" ),
boardBoundingBox.GetX(), boardBoundingBox.GetY(),
boardBoundingBox.GetWidth(), boardBoundingBox.GetHeight() );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
wxLogTrace( tracePrinting, wxT( "Fit size to page margins: x=%d, y=%d" ),
scaledPageSize.x, scaledPageSize.y );
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
wxLogTrace( tracePrinting, wxT( "Plot area in pixels: x=%d, y=%d" ),
PlotAreaSizeInPixels.x, PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
wxLogTrace( tracePrinting, wxT( "DC user scale: x=%g, y=%g" ),
scalex, scaley );
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = KiROUND( PlotAreaSizeInPixels.x / scalex );
PlotAreaSizeInUserUnits.y = KiROUND( PlotAreaSizeInPixels.y / scaley );
wxLogTrace( tracePrinting, wxT( "Scaled plot area in user units: x=%d, y=%d" ),
PlotAreaSizeInUserUnits.x, PlotAreaSizeInUserUnits.y );
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved to the center of the page:
if( m_Parent->IsType( MODULE_EDITOR_FRAME_TYPE ) )
{
boardBoundingBox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = g_DrawBgColor;
// Print frame reference, if reqquested, before
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false);
/* Plot offset x is moved by the x plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the X axis is reversed, therefore the plotting area
* is the x coordinate values from - PlotAreaSize.x to 0 */
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
wxLogTrace( tracePrinting, wxT( "Device origin: x=%d, y=%d" ),
x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
wxLogTrace( tracePrinting, wxT( "Logical origin: x=%d, y=%d" ),
offset.x, offset.y );
#if defined(wxUSE_LOG_TRACE) && defined( DEBUG )
wxRect paperRect = GetPaperRectPixels();
wxLogTrace( tracePrinting, wxT( "Paper rectangle: left=%d, top=%d, "
"right=%d, bottom=%d" ),
paperRect.GetLeft(), paperRect.GetTop(), paperRect.GetRight(),
paperRect.GetBottom() );
int devLeft = dc->LogicalToDeviceX( drawRect.GetX() );
int devTop = dc->LogicalToDeviceY( drawRect.GetY() );
int devRight = dc->LogicalToDeviceX( drawRect.GetRight() );
int devBottom = dc->LogicalToDeviceY( drawRect.GetBottom() );
wxLogTrace( tracePrinting, wxT( "Final device rectangle: left=%d, top=%d, "
"right=%d, bottom=%d\n" ),
devLeft, devTop, devRight, devBottom );
#endif
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as
* the screen but because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black background
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{
// Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer,
printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
else
GRForceBlackPen( true );
#if defined (GERBVIEW)
// In B&W mode, do not force black pen for Gerbview
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page
GRForceBlackPen( false );
#endif
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror,
&m_PrintParams );
g_DrawBgColor = bg_color;
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
}
void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
{
wxPaintDC dc( m_panelShowPad );
PAD_DRAWINFO drawInfo;
EDA_COLOR_T color = BLACK;
if( m_dummyPad->GetLayerSet()[F_Cu] )
{
color = m_board->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_dummyPad->GetLayerSet()[B_Cu] )
{
color = ColorMix( color, m_board->GetVisibleElementColor( PAD_BK_VISIBLE ) );
}
// What could happen: the pad color is *actually* black, or no
// copper was selected
if( color == BLACK )
color = LIGHTGRAY;
drawInfo.m_Color = color;
drawInfo.m_HoleColor = DARKGRAY;
drawInfo.m_Offset = m_dummyPad->GetPosition();
drawInfo.m_Display_padnum = true;
drawInfo.m_Display_netname = true;
if( m_dummyPad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
drawInfo.m_ShowNotPlatedHole = true;
// Shows the local pad clearance
drawInfo.m_PadClearance = m_dummyPad->GetLocalClearance();
wxSize dc_size = dc.GetSize();
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Calculate a suitable scale to fit the available draw area
int dim = m_dummyPad->GetBoundingRadius() *2;
// Invalid x size. User could enter zero, or have deleted all text prior to
// entering a new value; this is also treated as zero. If dim is left at
// zero, the drawing scale is zero and we get a crash.
if( dim == 0 )
{
// If drill size has been set, use that. Otherwise default to 1mm.
dim = m_dummyPad->GetDrillSize().x;
if( dim == 0 )
dim = Millimeter2iu( 1.0 );
}
if( m_dummyPad->GetLocalClearance() > 0 )
dim += m_dummyPad->GetLocalClearance() * 2;
double scale = (double) dc_size.x / dim;
// If the pad is a circle, use the x size here instead.
int ysize;
if( m_dummyPad->GetShape() == PAD_SHAPE_CIRCLE )
ysize = m_dummyPad->GetSize().x;
else
ysize = m_dummyPad->GetSize().y;
dim = ysize + std::abs( m_dummyPad->GetDelta().x );
// Invalid y size. See note about x size above.
if( dim == 0 )
{
dim = m_dummyPad->GetDrillSize().y;
if( dim == 0 )
dim = Millimeter2iu( 0.1 );
}
if( m_dummyPad->GetLocalClearance() > 0 )
dim += m_dummyPad->GetLocalClearance() * 2;
double altscale = (double) dc_size.y / dim;
scale = std::min( scale, altscale );
// Give a margin
scale *= 0.7;
dc.SetUserScale( scale, scale );
GRResetPenAndBrush( &dc );
m_dummyPad->DrawShape( NULL, &dc, drawInfo );
// Draw X and Y axis. Hhis is particularly useful to show the
// reference position of pads with offset and no hole, or custom pad shapes
const int linethickness = 0;
GRLine( NULL, &dc, -int( dc_size.x/scale ), 0, int( dc_size.x/scale ), 0,
linethickness, LIGHTBLUE ); // X axis
GRLine( NULL, &dc, 0, -int( dc_size.y/scale ), 0, int( dc_size.y/scale ),
linethickness, LIGHTBLUE ); // Y axis
event.Skip();
}
void DIALOG_PAGES_SETTINGS::UpdatePageLayoutExample()
{
int lyWidth, lyHeight;
wxSize clamped_layout_size( Clamp( MIN_PAGE_SIZE, m_layout_size.x, m_maxPageSizeMils.x ),
Clamp( MIN_PAGE_SIZE, m_layout_size.y, m_maxPageSizeMils.y ) );
double lyRatio = clamped_layout_size.x < clamped_layout_size.y ?
(double) clamped_layout_size.y / clamped_layout_size.x :
(double) clamped_layout_size.x / clamped_layout_size.y;
if( clamped_layout_size.x < clamped_layout_size.y )
{
lyHeight = MAX_PAGE_EXAMPLE_SIZE;
lyWidth = KiROUND( (double) lyHeight / lyRatio );
}
else
{
lyWidth = MAX_PAGE_EXAMPLE_SIZE;
lyHeight = KiROUND( (double) lyWidth / lyRatio );
}
if( m_page_bitmap )
{
m_PageLayoutExampleBitmap->SetBitmap( wxNullBitmap );
delete m_page_bitmap;
}
m_page_bitmap = new wxBitmap( lyWidth + 1, lyHeight + 1 );
if( m_page_bitmap->IsOk() )
{
double scaleW = (double) lyWidth / clamped_layout_size.x;
double scaleH = (double) lyHeight / clamped_layout_size.y;
// Prepare DC.
wxSize example_size( lyWidth + 1, lyHeight + 1 );
wxMemoryDC memDC;
memDC.SelectObject( *m_page_bitmap );
memDC.SetClippingRegion( wxPoint( 0, 0 ), example_size );
memDC.Clear();
memDC.SetUserScale( scaleW, scaleH );
// Get logical page size and margins.
PAGE_INFO pageDUMMY;
// Get page type
int idx = m_paperSizeComboBox->GetSelection();
if( idx < 0 )
idx = 0;
wxString pageFmtName = m_pageFmt[idx].BeforeFirst( ' ' );
bool portrait = clamped_layout_size.x < clamped_layout_size.y;
pageDUMMY.SetType( pageFmtName, portrait );
if( m_customFmt )
{
pageDUMMY.SetWidthMils( clamped_layout_size.x );
pageDUMMY.SetHeightMils( clamped_layout_size.y );
}
// Draw layout preview.
wxString emptyString;
GRResetPenAndBrush( &memDC );
WORKSHEET_LAYOUT::SetAltInstance( m_pagelayout );
GRFilledRect( NULL, &memDC, 0, 0, m_layout_size.x, m_layout_size.y, WHITE, WHITE );
DrawPageLayout( &memDC, NULL, pageDUMMY,
emptyString, emptyString,
m_tb, m_screen->m_NumberOfScreens,
m_screen->m_ScreenNumber, 1, 1, DARKGRAY, RED );
memDC.SelectObject( wxNullBitmap );
m_PageLayoutExampleBitmap->SetBitmap( *m_page_bitmap );
WORKSHEET_LAYOUT::SetAltInstance( NULL );
// Refresh the dialog.
Layout();
Refresh();
}
}
void DIALOG_PAD_PROPERTIES::OnPaintShowPanel( wxPaintEvent& event )
{
wxPaintDC dc( m_panelShowPad );
PAD_DRAWINFO drawInfo;
EDA_COLOR_T color = BLACK;
if( m_dummyPad->GetLayerSet()[F_Cu] )
{
color = m_board->GetVisibleElementColor( PAD_FR_VISIBLE );
}
if( m_dummyPad->GetLayerSet()[B_Cu] )
{
color = ColorMix( color, m_board->GetVisibleElementColor( PAD_BK_VISIBLE ) );
}
// What could happen: the pad color is *actually* black, or no
// copper was selected
if( color == BLACK )
color = LIGHTGRAY;
drawInfo.m_Color = color;
drawInfo.m_HoleColor = DARKGRAY;
drawInfo.m_Offset = m_dummyPad->GetPosition();
drawInfo.m_Display_padnum = true;
drawInfo.m_Display_netname = true;
if( m_dummyPad->GetAttribute() == PAD_HOLE_NOT_PLATED )
drawInfo.m_ShowNotPlatedHole = true;
// Shows the local pad clearance
drawInfo.m_PadClearance = m_dummyPad->GetLocalClearance();
wxSize dc_size = dc.GetSize();
dc.SetDeviceOrigin( dc_size.x / 2, dc_size.y / 2 );
// Calculate a suitable scale to fit the available draw area
int dim = m_dummyPad->GetSize().x + std::abs( m_dummyPad->GetDelta().y);
if( m_dummyPad->GetLocalClearance() > 0 )
dim += m_dummyPad->GetLocalClearance() * 2;
double scale = (double) dc_size.x / dim;
dim = m_dummyPad->GetSize().y + std::abs( m_dummyPad->GetDelta().x);
if( m_dummyPad->GetLocalClearance() > 0 )
dim += m_dummyPad->GetLocalClearance() * 2;
double altscale = (double) dc_size.y / dim;
scale = std::min( scale, altscale );
// Give a margin
scale *= 0.7;
dc.SetUserScale( scale, scale );
GRResetPenAndBrush( &dc );
m_dummyPad->DrawShape( NULL, &dc, drawInfo );
// Draw X and Y axis.
// this is particularly useful to show the reference position of pads
// with offset and no hole
GRLine( NULL, &dc, -dim, 0, dim, 0, 0, BLUE ); // X axis
GRLine( NULL, &dc, 0, -dim, 0, dim, 0, BLUE ); // Y axis
event.Skip();
}
/*
* This is the real print function: print the active screen
*/
void SCH_PRINTOUT::DrawPage( SCH_SCREEN* aScreen )
{
int oldZoom;
wxPoint tmp_startvisu;
wxSize pageSizeIU; // Page size in internal units
wxPoint old_org;
EDA_RECT oldClipBox;
wxRect fitRect;
wxDC* dc = GetDC();
auto panel = m_parent->GetCanvas();
wxBusyCursor dummy;
// Save current scale factor, offsets, and clip box.
tmp_startvisu = aScreen->m_StartVisu;
oldZoom = aScreen->GetZoom();
old_org = aScreen->m_DrawOrg;
oldClipBox = *panel->GetClipBox();
// Change clip box to print the whole page.
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
// Change scale factor and offset to print the whole page.
bool printReference = m_parent->GetPrintSheetReference();
pageSizeIU = aScreen->GetPageSettings().GetSizeIU();
FitThisSizeToPaper( pageSizeIU );
fitRect = GetLogicalPaperRect();
wxLogDebug( wxT( "Fit rectangle: x = %d, y = %d, w = %d, h = %d" ),
fitRect.x, fitRect.y, fitRect.width, fitRect.height );
// When is the actual paper size does not match the schematic page
// size, the drawing is not perfectly centered on X or Y axis.
// Give a draw offset centers the schematic page on the paper draw area
// Because the sizes are fitted, only an Y or X offset is needed
// and both are 0 when sizes are identical.
// Y or Y offset is not null when the X/Y size ratio differs between
// the actual paper size and the schematic page
int xoffset = ( fitRect.width - pageSizeIU.x ) / 2;
// For an obscure reason, OffsetLogicalOrigin creates issues,
// under some circumstances, when yoffset is not always null
// and changes from a page to another page
// This is only a workaround, not a fix
// see https://bugs.launchpad.net/kicad/+bug/1464773
// xoffset does not create issues.
#if 0 // FIX ME
int yoffset = ( fitRect.height - pageSizeIU.y ) / 2;
#else
// the Y centering will be not perfect, but this is less annoying
// than a blank page or a buggy centering
int yoffset = 0;
#endif
OffsetLogicalOrigin( xoffset, yoffset );
GRResetPenAndBrush( dc );
if( m_parent->GetPrintMonochrome() )
GRForceBlackPen( true );
aScreen->m_IsPrinting = true;
COLOR4D bgColor = m_parent->GetDrawBgColor();
aScreen->Draw( panel, dc, (GR_DRAWMODE) 0 );
if( printReference )
m_parent->DrawWorkSheet( dc, aScreen, GetDefaultLineThickness(),
IU_PER_MILS, aScreen->GetFileName() );
m_parent->SetDrawBgColor( bgColor );
aScreen->m_IsPrinting = false;
panel->SetClipBox( oldClipBox );
GRForceBlackPen( false );
aScreen->m_StartVisu = tmp_startvisu;
aScreen->m_DrawOrg = old_org;
aScreen->SetZoom( oldZoom );
}
/*
* This is the real print function: print the active screen
*/
void BOARD_PRINTOUT_CONTROLER::DrawPage()
{
int tmpzoom;
wxPoint tmp_startvisu;
wxPoint old_org;
wxPoint DrawOffset; // Offset de trace
double userscale;
double DrawZoom = 1;
wxDC* dc = GetDC();
PCB_SCREEN* screen = (PCB_SCREEN*) m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxBusyCursor dummy;
// Save old draw scale and draw offset
tmp_startvisu = screen->m_StartVisu;
tmpzoom = screen->GetZoom();
old_org = screen->m_DrawOrg;
// Change draw scale and offset to draw the whole page
screen->SetScalingFactor( DrawZoom );
screen->m_DrawOrg.x = screen->m_DrawOrg.y = 0;
screen->m_StartVisu.x = screen->m_StartVisu.y = 0;
PCB_BASE_FRAME* pcbframe = (PCB_BASE_FRAME*) m_Parent;
wxSize pageSizeIU = pcbframe->GetPageSizeIU(); // internal units
EDA_RECT bbbox = pcbframe->GetBoard()->ComputeBoundingBox();
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved:
if( m_Parent->IsType( MODULE_EDITOR_FRAME ) )
{
bbbox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( userscale == 0 ) // fit in page
{
// Margin = 0.4 inch
#if defined(KICAD_NANOMETRE)
int extra_margin = int( 0.4 * 25400 ); // nanometers
#else
int extra_margin = int( 0.4 * 1000 ); // deci-mils
#endif
pageSizeIU.x = bbbox.GetWidth() + extra_margin * 2;
pageSizeIU.y = bbbox.GetHeight() + extra_margin * 2;
userscale = 0.99;
}
if( (m_PrintParams.m_PrintScale > 1.0) // scale > 1 -> Recadrage
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset += bbbox.Centre();
}
if( m_PrintParams.m_PageSetupData )
{
wxSize pagesize;
pagesize.x = int( pageSizeIU.x / userscale );
pagesize.y = int( pageSizeIU.y / userscale );
FitThisSizeToPageMargins( pagesize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( userscale == 1.0 )
{
// We want a 1:1 scale and margins for printing
MapScreenSizeToPaper();
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = ( (double) ( DrawZoom * w ) ) / (double) PCB_INTERNAL_UNIT;
double accurate_Yscale = ( (double) ( DrawZoom * h ) ) / (double) PCB_INTERNAL_UNIT;
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= PlotAreaSize.x;
accurate_Xscale /= (double) w;
accurate_Yscale *= PlotAreaSize.y;
accurate_Yscale /= (double) h;
}
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Fine scale adjust
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale(&scalex, &scaley);
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = (int) (PlotAreaSizeInPixels.x/scalex);
PlotAreaSizeInUserUnits.y = (int) (PlotAreaSizeInPixels.y/scaley);
/* In some cases the plot origin is the centre of the page
* when:
* - Asked
* - scale > 1
* - fit in page
*/
if( m_PrintParams.m_ForceCentered
|| (m_PrintParams.m_PrintScale > 1.0) // scale > 1
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset.x -= PlotAreaSizeInUserUnits.x / 2;
DrawOffset.y -= PlotAreaSizeInUserUnits.y / 2;
}
screen->m_DrawOrg = DrawOffset;
GRResetPenAndBrush( dc );
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
m_Parent->GetScreen()->m_IsPrinting = true;
int bg_color = g_DrawBgColor;
if( m_PrintParams.m_Print_Sheet_Ref )
m_Parent->TraceWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize );
if( printMirror )
{
// To plot mirror, we reverse the y axis, and modify the plot y origin
dc->SetAxisOrientation( true, true );
if( userscale < 1.0 )
scaley /= userscale;
/* Plot offset y is moved by the y plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the Y axis is reversed, therefore the plotting area
* is the y coordinate values from - PlotAreaSize.y to 0 */
int y_dc_offset = PlotAreaSizeInPixels.y;
y_dc_offset = (int) ( ( double ) y_dc_offset * userscale );
dc->SetDeviceOrigin( 0, y_dc_offset );
int ysize = (int) ( PlotAreaSizeInPixels.y / scaley );
DrawOffset.y += ysize;
/* in order to keep the board position in the sheet
* (when user scale <= 1) the y offset in moved by the distance between
* the middle of the page and the middle of the board
* This is equivalent to put the mirror axis to the board centre
* for scales > 1, the DrawOffset was already computed to have the board centre
* to the middle of the page.
*/
wxPoint pcb_centre = bbbox.Centre();
if( userscale <= 1.0 )
DrawOffset.y += pcb_centre.y - (ysize / 2);
dc->SetLogicalOrigin( screen->m_DrawOrg.x, screen->m_DrawOrg.y );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as the screen
* But because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black backgroud
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{ // Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
g_DrawBgColor = bg_color;
m_Parent->GetScreen()->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
screen->m_StartVisu = tmp_startvisu;
screen->m_DrawOrg = old_org;
screen->SetZoom( tmpzoom );
}
void WinEDA_ViewlibFrame::RedrawActiveWindow(wxDC * DC, bool EraseBg)
{
EDA_LibComponentStruct * LibEntry = NULL;
LibCmpEntry * ViewCmpEntry = NULL;
const wxChar * RootName, * CmpName;
wxString Msg;
ActiveScreen = GetScreen();
if ( * g_CurrentViewComponentName )
{
LibEntry = FindLibPart(g_CurrentViewComponentName.GetData(),
g_CurrentViewLibraryName.GetData(), FIND_ALIAS);
ViewCmpEntry = (LibCmpEntry * ) LibEntry;
}
/* Forcage de la reinit de la brosse et plume courante */
GRResetPenAndBrush(DC);
DC->SetBackground(*wxBLACK_BRUSH );
DC->SetBackgroundMode(wxTRANSPARENT);
if ( EraseBg ) DrawPanel->EraseScreen(DC);
DrawPanel->DrawBackGround(DC);
if( LibEntry)
{
CmpName = LibEntry->m_Name.m_Text.GetData();
if( LibEntry->Type != ROOT)
{
RootName = ((EDA_LibCmpAliasStruct*)LibEntry)->m_RootName.GetData();
Msg.Printf( _("Current Part: <%s> (is Alias of <%s>)"),
CmpName, RootName);
LibEntry = FindLibPart(RootName,g_CurrentViewLibraryName,FIND_ROOT);
if( LibEntry == NULL)
{
Msg.Printf( _("Error: Root Part <%s> not found"), RootName);
DisplayError(this, Msg);
}
else
{
/* Affichage du composant ROOT, avec nom de l'alias */
wxString RealName;
RealName = LibEntry->m_Name.m_Text;
LibEntry->m_Name.m_Text = CmpName;
if ( g_ViewUnit < 1 ) g_ViewUnit = 1;
if ( g_ViewConvert < 1 ) g_ViewConvert = 1;
DrawLibEntry(DrawPanel, DC, LibEntry, 0, 0,
g_ViewUnit, g_ViewConvert, GR_DEFAULT_DRAWMODE);
LibEntry->m_Name.m_Text = RealName;
}
}
else
{
Msg.Printf( _("Current Part: <%s>"), ViewCmpEntry->m_Name.m_Text.GetData());
DrawLibEntry(DrawPanel, DC, LibEntry, 0, 0,
g_ViewUnit, g_ViewConvert, GR_DEFAULT_DRAWMODE);
}
AfficheDoc(this, ViewCmpEntry->m_Doc, ViewCmpEntry->m_KeyWord);
}
SetStatusText(Msg,0);
GetScreen()->Trace_Curseur(DrawPanel, DC);
}
void EDA_Printout::DrawPage(void)
/********************************/
/*
Routine effective d'impression
*/
{
int tmpzoom;
wxPoint tmp_startvisu;
wxSize PageSize_in_mm;
wxSize SheetSize; // Sheet size in internal units
wxSize PlotAreaSize; // Taille de la surface utile de trace (pixels)
float scaleX, scaleY, scale;
wxPoint old_org;
wxPoint DrawOffset; // Offset de trace
float userscale = 1.0;
wxDC * dc = GetDC();
wxBusyCursor dummy;
GetPageSizeMM(&PageSize_in_mm.x, &PageSize_in_mm.y);
/* modification des cadrages et reglages locaux */
tmp_startvisu = ActiveScreen->m_StartVisu;
tmpzoom = ActiveScreen->GetZoom();
old_org = ActiveScreen->m_DrawOrg;
ActiveScreen->m_DrawOrg.x = ActiveScreen->m_DrawOrg.y = 0;
ActiveScreen->m_StartVisu.x = ActiveScreen->m_StartVisu.y = 0;
// Get margins
float marginX0 = (float) g_PageSetupData->GetMarginTopLeft().x; // in mm
float marginY0 = (float) g_PageSetupData->GetMarginTopLeft().y;
float marginX1 = (float) g_PageSetupData->GetMarginBottomRight().x;
float marginY1 = (float) g_PageSetupData->GetMarginBottomRight().y;
SheetSize = ActiveScreen->m_CurrentSheet->m_Size; // size in 1/1000 inch
SheetSize.x *= m_Parent->m_InternalUnits / 1000;
SheetSize.y *= m_Parent->m_InternalUnits / 1000; // size in pixels
// Get the size of the DC in pixels
dc->GetSize(&PlotAreaSize.x, &PlotAreaSize.y);
// Calcul des marges
marginX0 *= (float) PlotAreaSize.x / PageSize_in_mm.x; /* margin est en pixels */
marginY0 *= (float) PlotAreaSize.y / PageSize_in_mm.y;
marginX1 *= (float) PlotAreaSize.x / PageSize_in_mm.x;
marginY1 *= (float) PlotAreaSize.y / PageSize_in_mm.y;
PlotAreaSize.x -= (int)( marginX0 + marginX1);
PlotAreaSize.y -= (int)( marginY0 + marginY1);
#ifdef PCBNEW
WinEDA_BasePcbFrame * pcbframe = (WinEDA_BasePcbFrame*) m_Parent;
pcbframe->m_Pcb->ComputeBoundaryBox();
/* calcul des dimensions du PCB */
if (s_ScaleList[s_Scale_Select] == 0) // fit in page
{
SheetSize.x = pcbframe->m_Pcb->m_BoundaryBox.GetWidth();
SheetSize.y = pcbframe->m_Pcb->m_BoundaryBox.GetHeight();
}
else userscale = s_ScaleList[s_Scale_Select];
if ( (s_ScaleList[s_Scale_Select] > 1.0) || // scale > 1 -> Recadrage
(s_ScaleList[s_Scale_Select] == 0) ) // fit in page
{
DrawOffset.x += pcbframe->m_Pcb->m_BoundaryBox.GetX();
DrawOffset.y += pcbframe->m_Pcb->m_BoundaryBox.GetY();
}
#endif
// Calculate a suitable scaling factor
scaleX = (float)SheetSize.x / PlotAreaSize.x;
scaleY = (float)SheetSize.y / PlotAreaSize.y;
scale = wxMax(scaleX,scaleY) / userscale; // Use x or y scaling factor, whichever fits on the DC
int zoom = 1;
ActiveScreen->SetZoom(zoom);
// ajustage de l'echelle de trace
#ifdef PCBNEW
dc->SetUserScale(zoom / scale * m_PrintFrame->m_XScaleAdjust, zoom / scale * m_PrintFrame->m_YScaleAdjust);
#else
dc->SetUserScale(zoom / scale, zoom / scale);
#endif
DrawOffset.x -= (int)(marginX0 * scale); // margin est désiré en absolu!
DrawOffset.y -= (int)(marginY0 * scale);
#ifdef PCBNEW
DrawOffset.x += (int)( (SheetSize.x/2) * (m_PrintFrame->m_XScaleAdjust -1.0));
DrawOffset.y += (int)( (SheetSize.y/2) * (m_PrintFrame->m_YScaleAdjust -1.0));
#endif
ActiveScreen->m_DrawOrg = DrawOffset;
GRResetPenAndBrush(dc);
if( s_Print_Black_and_White ) GRForceBlackPen(TRUE);
#ifdef EESCHEMA
/* set Pen min width */
float ftmp;
// PenMinWidth est donné en 1/100 mm, a convertir en pixels
ftmp = (float)PenMinWidth / 100; // ftmp est en mm
ftmp *= (float)PlotAreaSize.x / PageSize_in_mm.x; /* ftmp est en pixels */
SetPenMinWidth((int)ftmp);
#else
SetPenMinWidth(1);
#endif
WinEDA_DrawPanel * panel = m_Parent->DrawPanel;
EDA_Rect tmp = panel->m_ClipBox;
panel->m_ClipBox.SetOrigin(wxPoint(0,0));
panel->m_ClipBox.SetSize(wxSize(0x7FFFFF0, 0x7FFFFF0));
#ifdef EESCHEMA
if( s_Print_Black_and_White )
g_PrintFillMask = FILLED_WITH_BG_BODYCOLOR;
#endif
g_IsPrinting = TRUE;
panel->PrintPage(dc, m_Print_Sheet_Ref, s_PrintMaskLayer);
g_IsPrinting = FALSE;
#ifdef EESCHEMA
g_PrintFillMask = 0;
#endif
panel->m_ClipBox = tmp;
SetPenMinWidth(1);
GRForceBlackPen(FALSE);
ActiveScreen->m_StartVisu = tmp_startvisu;
ActiveScreen->m_DrawOrg = old_org;
ActiveScreen->SetZoom(tmpzoom);
}
void EDA_Printout::DrawPage(void)
/********************************/
/*
This is the real print function: print the active screen
*/
{
int tmpzoom;
wxPoint tmp_startvisu;
wxSize PageSize_in_mm;
wxSize SheetSize; // Sheet size in internal units
wxSize PlotAreaSize; // Taille de la surface utile de trace (pixels)
double scaleX, scaleY, scale;
wxPoint old_org;
wxPoint DrawOffset; // Offset de trace
double userscale;
wxDC * dc = GetDC();
int DrawZoom = 1;
wxBusyCursor dummy;
GetPageSizeMM(&PageSize_in_mm.x, &PageSize_in_mm.y);
/* Save old draw scale and draw offset */
tmp_startvisu = ActiveScreen->m_StartVisu;
tmpzoom = ActiveScreen->GetZoom();
old_org = ActiveScreen->m_DrawOrg;
/* Change draw scale and offset to draw the whole page*/
ActiveScreen->SetZoom(DrawZoom);
ActiveScreen->m_DrawOrg.x = ActiveScreen->m_DrawOrg.y = 0;
ActiveScreen->m_StartVisu.x = ActiveScreen->m_StartVisu.y = 0;
SheetSize = ActiveScreen->m_CurrentSheet->m_Size; // size in 1/1000 inch
SheetSize.x *= m_Parent->m_InternalUnits / 1000;
SheetSize.y *= m_Parent->m_InternalUnits / 1000; // size in pixels
// Get the size of the DC in pixels
dc->GetSize(&PlotAreaSize.x, &PlotAreaSize.y);
#ifdef PCBNEW
WinEDA_BasePcbFrame * pcbframe = (WinEDA_BasePcbFrame*) m_Parent;
pcbframe->m_Pcb->ComputeBoundaryBox();
/* calcul des dimensions du PCB */
if (s_ScaleList[s_Scale_Select] == 0) // fit in page
{
int extra_margin = 8000; // Margin = 8000/2 units pcb = 0,4 inch
SheetSize.x = pcbframe->m_Pcb->m_BoundaryBox.GetWidth() + extra_margin;
SheetSize.y = pcbframe->m_Pcb->m_BoundaryBox.GetHeight() + extra_margin;
userscale = 0.99;
}
else userscale = s_ScaleList[s_Scale_Select];
if ( (s_ScaleList[s_Scale_Select] > 1.0) || // scale > 1 -> Recadrage
(s_ScaleList[s_Scale_Select] == 0) ) // fit in page
{
DrawOffset.x += pcbframe->m_Pcb->m_BoundaryBox.Centre().x;
DrawOffset.y += pcbframe->m_Pcb->m_BoundaryBox.Centre().y;
}
#endif
// Calculate a suitable scaling factor
scaleX = (double)SheetSize.x / PlotAreaSize.x;
scaleY = (double)SheetSize.y / PlotAreaSize.y;
scale = wxMax(scaleX,scaleY) / userscale; // Use x or y scaling factor, whichever fits on the DC
// ajust the real draw scale
#ifdef PCBNEW
double accurate_Xscale, accurate_Yscale;
dc->SetUserScale(DrawZoom / scale * m_PrintFrame->m_XScaleAdjust,
DrawZoom / scale * m_PrintFrame->m_YScaleAdjust);
// Compute Accurate scale 1
{
int w, h;
GetPPIPrinter(&w, &h);
accurate_Xscale = ((double)(DrawZoom * w))/ PCB_INTERNAL_UNIT;
accurate_Yscale = ((double)(DrawZoom * h))/ PCB_INTERNAL_UNIT;
if ( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
dc->GetSize(&PlotAreaSize.x, &PlotAreaSize.y);
GetPageSizePixels(&w, &h);
accurate_Xscale *= PlotAreaSize.x; accurate_Xscale /= w;
accurate_Yscale *= PlotAreaSize.y; accurate_Yscale /= h;
}
accurate_Xscale *= m_PrintFrame->m_XScaleAdjust;
accurate_Yscale *= m_PrintFrame->m_YScaleAdjust;
}
#else
dc->SetUserScale(DrawZoom / scale, DrawZoom / scale);
#endif
#ifdef PCBNEW
if ( (s_ScaleList[s_Scale_Select] > 1.0) || // scale > 1 -> Recadrage
(s_ScaleList[s_Scale_Select] == 0) ) // fit in page
{
DrawOffset.x -= (int)( (PlotAreaSize.x/2) * scale);
DrawOffset.y -= (int)( (PlotAreaSize.y/2) * scale );
}
DrawOffset.x += (int)( (SheetSize.x/2) * (m_PrintFrame->m_XScaleAdjust -1.0));
DrawOffset.y += (int)( (SheetSize.y/2) * (m_PrintFrame->m_YScaleAdjust -1.0));
#endif
ActiveScreen->m_DrawOrg = DrawOffset;
GRResetPenAndBrush(dc);
if( s_Print_Black_and_White ) GRForceBlackPen(TRUE);
#ifdef EESCHEMA
/* set Pen min width */
float ftmp;
// PenMinWidth est donné en 1/100 mm, a convertir en pixels
ftmp = (float)PenMinWidth / 100; // ftmp est en mm
ftmp *= (float)PlotAreaSize.x / PageSize_in_mm.x; /* ftmp est en pixels */
SetPenMinWidth((int)ftmp);
#else
SetPenMinWidth(1);
#endif
WinEDA_DrawPanel * panel = m_Parent->DrawPanel;
EDA_Rect tmp = panel->m_ClipBox;
panel->m_ClipBox.SetOrigin(wxPoint(0,0));
panel->m_ClipBox.SetSize(wxSize(0x7FFFFF0, 0x7FFFFF0));
g_IsPrinting = TRUE;
#ifdef EESCHEMA
if( s_Print_Black_and_White )
g_PrintFillMask = FILLED_WITH_BG_BODYCOLOR;
#endif
#ifdef PCBNEW
if ( userscale == 1.0 ) // Draw the Sheet refs at optimum scale, and board at 1.0 scale
{
if ( m_Print_Sheet_Ref )
m_Parent->TraceWorkSheet( dc, ActiveScreen);
m_Print_Sheet_Ref = FALSE;
dc->SetUserScale( accurate_Yscale, accurate_Yscale);
}
#endif
panel->PrintPage(dc, m_Print_Sheet_Ref, s_PrintMaskLayer);
#ifdef EESCHEMA
g_PrintFillMask = 0;
#endif
g_IsPrinting = FALSE;
panel->m_ClipBox = tmp;
SetPenMinWidth(1);
GRForceBlackPen(FALSE);
ActiveScreen->m_StartVisu = tmp_startvisu;
ActiveScreen->m_DrawOrg = old_org;
ActiveScreen->SetZoom(tmpzoom);
}
void BOARD_PRINTOUT_CONTROLLER::DrawPage()
{
wxPoint offset;
double userscale;
EDA_RECT boardBoundingBox;
EDA_RECT drawRect;
wxDC* dc = GetDC();
BASE_SCREEN* screen = m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxSize pageSizeIU = m_Parent->GetPageSizeIU();
wxBusyCursor dummy;
boardBoundingBox = ((GERBVIEW_FRAME*) m_Parent)->GetGerberLayoutBoundingBox();
wxString titleblockFilename; // TODO see if we uses the gerber file name
// Use the page size as the drawing area when the board is shown or the user scale
// is less than 1.
if( m_PrintParams.PrintBorderAndTitleBlock() )
boardBoundingBox = EDA_RECT( wxPoint( 0, 0 ), pageSizeIU );
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( m_PrintParams.m_PrintScale == 0 ) // fit in page option
{
if(boardBoundingBox.GetWidth() && boardBoundingBox.GetHeight())
{
int margin = Millimeter2iu( 10.0 ); // add a margin around the drawings
double scaleX = (double)(pageSizeIU.x - (2 * margin)) /
boardBoundingBox.GetWidth();
double scaleY = (double)(pageSizeIU.y - (2 * margin)) /
boardBoundingBox.GetHeight();
userscale = (scaleX < scaleY) ? scaleX : scaleY;
}
else
userscale = 1.0;
}
wxSize scaledPageSize = pageSizeIU;
drawRect.SetSize( scaledPageSize );
scaledPageSize.x = wxRound( scaledPageSize.x / userscale );
scaledPageSize.y = wxRound( scaledPageSize.y / userscale );
if( m_PrintParams.m_PageSetupData )
{
// Always scale to the size of the paper.
FitThisSizeToPageMargins( scaledPageSize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( m_PrintParams.m_PrintScale == 1.0 )
{
// We want a 1:1 scale, regardless the page setup
// like page size, margin ...
MapScreenSizeToPaper(); // set best scale and offset (scale is not used)
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = (double) w / (IU_PER_MILS*1000);
double accurate_Yscale = (double) h / (IU_PER_MILS*1000);
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= (double)PlotAreaSize.x / w;
accurate_Yscale *= (double)PlotAreaSize.y / h;
}
// Fine scale adjust
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Set print scale for 1:1 exact scale
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale( &scalex, &scaley );
// In some cases the plot origin is the centre of the board outline rather than the center
// of the selected paper size.
if( m_PrintParams.CenterOnBoardOutline() )
{
// Here we are only drawing the board and it's contents.
drawRect = boardBoundingBox;
offset.x += wxRound( (double) -scaledPageSize.x / 2.0 );
offset.y += wxRound( (double) -scaledPageSize.y / 2.0 );
wxPoint center = boardBoundingBox.Centre();
if( printMirror )
{
// Calculate the mirrored center of the board.
center.x = m_Parent->GetPageSizeIU().x - boardBoundingBox.Centre().x;
}
offset += center;
}
GRResetPenAndBrush( dc );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
screen->m_IsPrinting = true;
EDA_COLOR_T bg_color = m_Parent->GetDrawBgColor();
// Print frame reference, if requested, before printing draw layers
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
if( m_PrintParams.PrintBorderAndTitleBlock() )
m_Parent->DrawWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize,
IU_PER_MILS, titleblockFilename );
if( printMirror )
{
// To plot mirror, we reverse the x axis, and modify the plot x origin
dc->SetAxisOrientation( false, false );
/* Change plot offset in order to have the draw area at the same location.
* The plot origin X is just moved from 0 to PlotAreaSizeInPixels.x.
* just set offset x at PlotAreaSizeInPixels.x.
*/
int x_dc_offset = PlotAreaSizeInPixels.x;
x_dc_offset = KiROUND( x_dc_offset * userscale );
dc->SetDeviceOrigin( x_dc_offset, 0 );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE / 2, -MAX_VALUE / 2 ),
panel->GetClipBox()->GetSize() ) );
}
// screen->m_DrawOrg = offset;
dc->SetLogicalOrigin( offset.x, offset.y );
m_Parent->SetDrawBgColor( WHITE );
// Never force black pen to print draw layers
// because negative objects need a white pen, not a black pen
// B&W mode is handled in print page function
GRForceBlackPen( false );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
m_Parent->SetDrawBgColor( bg_color );
screen->m_IsPrinting = false;
panel->SetClipBox( tmp );
}
