bool EffectDtmf::Startup()
{
wxString base = wxT("/Effects/DtmfGen/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
gPrefs->Read(base + wxT("String"), &dtmfSequence, wxT(SHORT_APP_NAME));
gPrefs->Read(base + wxT("DutyCycle"), &dtmfDutyCycle, 550L);
gPrefs->Read(base + wxT("Amplitude"), &dtmfAmplitude, 0.8f);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
bool EffectCompressor::Startup()
{
wxString base = wxT("/Effects/Compressor/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
gPrefs->Read(base + wxT("ThresholdDB"), &mThresholdDB, -12.0f );
gPrefs->Read(base + wxT("NoiseFloorDB"), &mNoiseFloorDB, -40.0f );
gPrefs->Read(base + wxT("Ratio"), &mRatio, 2.0f );
gPrefs->Read(base + wxT("AttackTime"), &mAttackTime, 0.2f );
gPrefs->Read(base + wxT("DecayTime"), &mDecayTime, 1.0f );
gPrefs->Read(base + wxT("Normalize"), &mNormalize, true );
gPrefs->Read(base + wxT("UsePeak"), &mUsePeak, false );
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
bool EffectNoise::Startup()
{
wxString base = wxT("/Effects/Noise/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
gPrefs->Read(base + wxT("Type"), &mType, 0L);
gPrefs->Read(base + wxT("Amplitude"), &mAmp, 0.8f);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
bool EffectAutoDuck::Startup()
{
wxString base = wxT("/Effects/AutoDuck/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
gPrefs->Read(base + wxT("DuckAmountDb"), &mDuckAmountDb, DEF_DuckAmountDb);
gPrefs->Read(base + wxT("InnerFadeDownLen"), &mInnerFadeDownLen, DEF_InnerFadeDownLen);
gPrefs->Read(base + wxT("InnerFadeUpLen"), &mInnerFadeUpLen, DEF_InnerFadeUpLen);
gPrefs->Read(base + wxT("OuterFadeDownLen"), &mOuterFadeDownLen, DEF_OuterFadeDownLen);
gPrefs->Read(base + wxT("OuterFadeUpLen"), &mOuterFadeUpLen, DEF_OuterFadeUpLen);
gPrefs->Read(base + wxT("ThresholdDb"), &mThresholdDb, DEF_ThresholdDb);
gPrefs->Read(base + wxT("MaximumPause"), &mMaximumPause, DEF_MaximumPause);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
void EffectChangeSpeed::Update_Vinyl()
// Update Vinyl controls from percent change.
{
// Match Vinyl rpm when within 0.01% of a standard ratio.
// Ratios calculated as: ((toRPM / fromRPM) - 1) * 100 * 100
// Caution: m_PercentChange could be infinite
int ratio = (int)((m_PercentChange * 100) + 0.5);
switch (ratio)
{
case 0: // toRPM is the same as fromRPM
if (mFromVinyl != kVinyl_NA) {
mpChoice_ToVinyl->SetSelection(mpChoice_FromVinyl->GetSelection());
} else {
// Use the last saved option.
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, 0);
mpChoice_FromVinyl->SetSelection(mFromVinyl);
mpChoice_ToVinyl->SetSelection(mFromVinyl);
}
break;
case 3500:
mpChoice_FromVinyl->SetSelection(kVinyl_33AndAThird);
mpChoice_ToVinyl->SetSelection(kVinyl_45);
break;
case 13400:
mpChoice_FromVinyl->SetSelection(kVinyl_33AndAThird);
mpChoice_ToVinyl->SetSelection(kVinyl_78);
break;
case -2593:
mpChoice_FromVinyl->SetSelection(kVinyl_45);
mpChoice_ToVinyl->SetSelection(kVinyl_33AndAThird);
break;
case 7333:
mpChoice_FromVinyl->SetSelection(kVinyl_45);
mpChoice_ToVinyl->SetSelection(kVinyl_78);
break;
case -5727:
mpChoice_FromVinyl->SetSelection(kVinyl_78);
mpChoice_ToVinyl->SetSelection(kVinyl_33AndAThird);
break;
case -4231:
mpChoice_FromVinyl->SetSelection(kVinyl_78);
mpChoice_ToVinyl->SetSelection(kVinyl_45);
break;
default:
mpChoice_ToVinyl->SetSelection(kVinyl_NA);
}
// and update variables.
mFromVinyl = mpChoice_FromVinyl->GetSelection();
mToVinyl = mpChoice_ToVinyl->GetSelection();
}
bool EffectChangeSpeed::Startup()
{
wxString base = wxT("/Effects/ChangeSpeed/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
// Retrieve last used control values
gPrefs->Read(base + wxT("PercentChange"), &m_PercentChange, 0);
// default format "4" is the same as the Selection toolbar: "hh:mm:ss + milliseconds";
gPrefs->Read(base + wxT("TimeFormat"), &mFormat, _("hh:mm:ss + milliseconds"));
gPrefs->Read(base + wxT("VinylChoice"), &mFromVinyl, 0);
if (mFromVinyl == kVinyl_NA)
{
mFromVinyl = kVinyl_33AndAThird;
}
SetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat);
SetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
bool EffectTruncSilence::Startup()
{
wxString base = wxT("/Effects/TruncateSilence/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
int truncDbChoiceIndex = gPrefs->Read(base + wxT("DbChoiceIndex"), 4L);
if ((truncDbChoiceIndex < 0) || (truncDbChoiceIndex >= Enums::NumDbChoices))
{ // corrupted Prefs?
truncDbChoiceIndex = 4L;
}
mThresholdDB = enumToDB( truncDbChoiceIndex );
mActionIndex = gPrefs->Read(base + wxT("ProcessChoice"), 0L);
if ((mActionIndex < 0) || (mActionIndex > 1))
{ // corrupted Prefs?
mActionIndex = 0L;
}
gPrefs->Read(base + wxT("InitialAllowedSilence"), &mInitialAllowedSilence, 0.5);
if ((mInitialAllowedSilence < 0.001) || (mInitialAllowedSilence > 10000.0))
{ // corrupted Prefs?
mInitialAllowedSilence = 0.5;
}
gPrefs->Read(base + wxT("LongestAllowedSilence"), &mTruncLongestAllowedSilence, 0.5);
if ((mTruncLongestAllowedSilence < 0.0) || (mTruncLongestAllowedSilence > 10000.0))
{ // corrupted Prefs?
mTruncLongestAllowedSilence = 0.5;
}
gPrefs->Read(base + wxT("CompressPercent"), &mSilenceCompressPercent, 50.0);
if ((mSilenceCompressPercent < 0.0) || (mSilenceCompressPercent > 100.0))
{ // corrupted Prefs?
mSilenceCompressPercent = 50.0;
}
SaveUserPreset(GetCurrentSettingsGroup());
}
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
return true;
}
bool EffectScienFilter::Startup()
{
wxString base = wxT("/SciFilter/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
double dTemp;
gPrefs->Read(base + wxT("Order"), &mOrder, 1);
mOrder = wxMax (1, mOrder);
mOrder = wxMin (MAX_Order, mOrder);
gPrefs->Read(base + wxT("FilterType"), &mFilterType, 0);
mFilterType = wxMax (0, mFilterType);
mFilterType = wxMin (2, mFilterType);
gPrefs->Read(base + wxT("FilterSubtype"), &mFilterSubtype, 0);
mFilterSubtype = wxMax (0, mFilterSubtype);
mFilterSubtype = wxMin (1, mFilterSubtype);
gPrefs->Read(base + wxT("Cutoff"), &dTemp, 1000.0);
mCutoff = (float)dTemp;
mCutoff = wxMax (1, mCutoff);
mCutoff = wxMin (100000, mCutoff);
gPrefs->Read(base + wxT("Ripple"), &dTemp, 1.0);
mRipple = dTemp;
mRipple = wxMax (0, mRipple);
mRipple = wxMin (100, mRipple);
gPrefs->Read(base + wxT("StopbandRipple"), &dTemp, 30.0);
mStopbandRipple = dTemp;
mStopbandRipple = wxMax (0, mStopbandRipple);
mStopbandRipple = wxMin (100, mStopbandRipple);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
gPrefs->Flush();
}
return true;
}
void EffectChangeSpeed::OnChoice_Vinyl(wxCommandEvent & WXUNUSED(evt))
{
// Treat mpChoice_FromVinyl and mpChoice_ToVinyl as one control since we need
// both to calculate Percent Change.
mFromVinyl = mpChoice_FromVinyl->GetSelection();
mToVinyl = mpChoice_ToVinyl->GetSelection();
// Use this as the 'preferred' choice.
if (mFromVinyl != kVinyl_NA) {
SetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl);
}
// If mFromVinyl & mToVinyl are set, then there's a NEW percent change.
if ((mFromVinyl != kVinyl_NA) && (mToVinyl != kVinyl_NA))
{
double fromRPM;
double toRPM;
switch (mFromVinyl) {
default:
case kVinyl_33AndAThird: fromRPM = 33.0 + (1.0 / 3.0); break;
case kVinyl_45: fromRPM = 45.0; break;
case kVinyl_78: fromRPM = 78; break;
}
switch (mToVinyl) {
default:
case kVinyl_33AndAThird: toRPM = 33.0 + (1.0 / 3.0); break;
case kVinyl_45: toRPM = 45.0; break;
case kVinyl_78: toRPM = 78; break;
}
m_PercentChange = ((toRPM * 100.0) / fromRPM) - 100.0;
UpdateUI();
mbLoopDetect = true;
Update_Text_PercentChange();
Update_Text_Multiplier();
Update_Slider_PercentChange();
Update_TimeCtrl_ToLength();
}
mbLoopDetect = false;
}
void EffectChangeSpeed::PopulateOrExchange(ShuttleGui & S)
{
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("TimeFormat"), mFormat, mFormat);
GetPrivateConfig(GetCurrentSettingsGroup(), wxT("VinylChoice"), mFromVinyl, mFromVinyl);
S.SetBorder(5);
S.StartVerticalLay(0);
{
S.AddSpace(0, 5);
S.AddTitle(_("Change Speed, affecting both Tempo and Pitch"));
S.AddSpace(0, 10);
// Speed multiplier and percent change controls.
S.StartMultiColumn(4, wxCENTER);
{
FloatingPointValidator<double> vldMultiplier(3, &mMultiplier, NUM_VAL_THREE_TRAILING_ZEROES);
vldMultiplier.SetRange(MIN_Percentage / 100.0, ((MAX_Percentage / 100.0) + 1));
mpTextCtrl_Multiplier =
S.Id(ID_Multiplier).AddTextBox(_("Speed Multiplier:"), wxT(""), 12);
mpTextCtrl_Multiplier->SetValidator(vldMultiplier);
FloatingPointValidator<double> vldPercentage(3, &m_PercentChange, NUM_VAL_THREE_TRAILING_ZEROES);
vldPercentage.SetRange(MIN_Percentage, MAX_Percentage);
mpTextCtrl_PercentChange =
S.Id(ID_PercentChange).AddTextBox(_("Percent Change:"), wxT(""), 12);
mpTextCtrl_PercentChange->SetValidator(vldPercentage);
}
S.EndMultiColumn();
// Percent change slider.
S.StartHorizontalLay(wxEXPAND);
{
S.SetStyle(wxSL_HORIZONTAL);
mpSlider_PercentChange =
S.Id(ID_PercentChange).AddSlider(wxT(""), 0, (int)kSliderMax, (int)MIN_Percentage);
mpSlider_PercentChange->SetName(_("Percent Change"));
}
S.EndHorizontalLay();
// Vinyl rpm controls.
S.StartMultiColumn(5, wxCENTER);
{
/* i18n-hint: "rpm" is an English abbreviation meaning "revolutions per minute". */
S.AddUnits(_("Standard Vinyl rpm:"));
wxASSERT(kNumVinyl == WXSIZEOF(kVinylStrings));
wxArrayString vinylChoices;
for (int i = 0; i < kNumVinyl; i++)
{
if (i == kVinyl_NA)
{
vinylChoices.Add(wxGetTranslation(kVinylStrings[i]));
}
else
{
vinylChoices.Add(kVinylStrings[i]);
}
}
mpChoice_FromVinyl =
S.Id(ID_FromVinyl).AddChoice(_("from"), wxT(""), &vinylChoices);
mpChoice_FromVinyl->SetName(_("From rpm"));
mpChoice_FromVinyl->SetSizeHints(100, -1);
mpChoice_ToVinyl =
S.Id(ID_ToVinyl).AddChoice(_("to"), wxT(""), &vinylChoices);
mpChoice_ToVinyl->SetName(_("To rpm"));
mpChoice_ToVinyl->SetSizeHints(100, -1);
}
S.EndMultiColumn();
// From/To time controls.
S.StartStatic(_("Selection Length"), 0);
{
S.StartMultiColumn(2, wxALIGN_LEFT);
{
S.AddPrompt(_("Current Length:"));
mpFromLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
wxID_ANY,
mFormat,
mFromLength,
mProjectRate);
mpFromLengthCtrl->SetName(_("from"));
mpFromLengthCtrl->SetToolTip(_("Current length of selection."));
mpFromLengthCtrl->SetReadOnly(true);
mpFromLengthCtrl->EnableMenu(false);
S.AddWindow(mpFromLengthCtrl, wxALIGN_LEFT);
S.AddPrompt(_("New Length:"));
mpToLengthCtrl = safenew
NumericTextCtrl(NumericConverter::TIME,
S.GetParent(),
ID_ToLength,
mFormat,
mToLength,
mProjectRate);
mpToLengthCtrl->SetName(_("to"));
mpToLengthCtrl->EnableMenu();
S.AddWindow(mpToLengthCtrl, wxALIGN_LEFT);
}
S.EndMultiColumn();
}
S.EndStatic();
}
S.EndVerticalLay();
}
bool EffectReverb::Startup()
{
wxString base = wxT("/Effects/Reverb/");
// Migrate settings from 2.1.0 or before
// Already migrated, so bail
if (gPrefs->Exists(base + wxT("Migrated")))
{
return true;
}
// Load the old "current" settings
if (gPrefs->Exists(base))
{
gPrefs->Read(base + wxT("RoomSize"), &mParams.mRoomSize, DEF_RoomSize);
gPrefs->Read(base + wxT("Delay"), &mParams.mPreDelay, DEF_PreDelay);
gPrefs->Read(base + wxT("Reverberance"), &mParams.mReverberance, DEF_Reverberance);
gPrefs->Read(base + wxT("HfDamping"), &mParams.mHfDamping, DEF_HfDamping);
gPrefs->Read(base + wxT("ToneLow"), &mParams.mToneLow, DEF_ToneLow);
gPrefs->Read(base + wxT("ToneHigh"), &mParams.mToneHigh, DEF_ToneHigh);
gPrefs->Read(base + wxT("WetGain"), &mParams.mWetGain, DEF_WetGain);
gPrefs->Read(base + wxT("DryGain"), &mParams.mDryGain, DEF_DryGain);
gPrefs->Read(base + wxT("StereoWidth"), &mParams.mStereoWidth, DEF_StereoWidth);
gPrefs->Read(base + wxT("WetOnly"), &mParams.mWetOnly, DEF_WetOnly);
SaveUserPreset(GetCurrentSettingsGroup());
// Do not migrate again
gPrefs->Write(base + wxT("Migrated"), true);
}
// Load the previous user presets
for (int i = 0; i < 10; i++)
{
wxString path = base + wxString::Format(wxT("%d/"), i);
if (gPrefs->Exists(path))
{
Params save = mParams;
wxString name;
gPrefs->Read(path + wxT("RoomSize"), &mParams.mRoomSize, DEF_RoomSize);
gPrefs->Read(path + wxT("Delay"), &mParams.mPreDelay, DEF_PreDelay);
gPrefs->Read(path + wxT("Reverberance"), &mParams.mReverberance, DEF_Reverberance);
gPrefs->Read(path + wxT("HfDamping"), &mParams.mHfDamping, DEF_HfDamping);
gPrefs->Read(path + wxT("ToneLow"), &mParams.mToneLow, DEF_ToneLow);
gPrefs->Read(path + wxT("ToneHigh"), &mParams.mToneHigh, DEF_ToneHigh);
gPrefs->Read(path + wxT("WetGain"), &mParams.mWetGain, DEF_WetGain);
gPrefs->Read(path + wxT("DryGain"), &mParams.mDryGain, DEF_DryGain);
gPrefs->Read(path + wxT("StereoWidth"), &mParams.mStereoWidth, DEF_StereoWidth);
gPrefs->Read(path + wxT("WetOnly"), &mParams.mWetOnly, DEF_WetOnly);
gPrefs->Read(path + wxT("name"), &name, wxEmptyString);
if (!name.IsEmpty())
{
name.Prepend(wxT(" - "));
}
name.Prepend(wxString::Format(wxT("Settings%d"), i));
SaveUserPreset(GetUserPresetsGroup(name));
mParams = save;
}
}
return true;
}
