void
avtTraceHistoryFilter::Execute(void)
{
//
// Write out the connectivity. "-1" is the hint to do that.
//
OutputTime(GetTypedInput(), -1);
//
// Pull out just the points.
//
avtDataset_p ds = InitializeDataset();
//
// Put the fields from the current time step on the points and then
// output those fields.
//
PerformIteration(0, ds, false);
OutputTime(ds, 0);
//
// Now iterate through the time slices, displacing and evaluating.
//
for (int i = 0 ; i < atts.GetNumiter() ; i++)
{
ds->SetSource(GetInput()->GetSource());
PerformIteration(i, ds, true);
OutputTime(ds, i+1);
}
// The operator just passes the data through.
GetDataTree() = GetInputDataTree();
}
void
avtSIMODataTreeIterator::Execute(void)
{
//
// This will walk through the data domains in a data tree.
//
avtDataTree_p tree = GetInputDataTree();
avtDataTree_p newTree;
if (*tree != NULL)
{
totalNodes = tree->GetNumberOfLeaves();
newTree = Execute(tree);
}
else
{
// This can happen when a filter serves up an empty data tree.
// It can also happen when we claim memory from intermediate
// data objects and then go back to execute them.
debug1 << "Unusual situation: NULL input tree to SIMO iterator. Likely "
<< "that an exception occurred previously." << endl;
}
if (*newTree == NULL)
{
//
// Lots of code assumes that the root tree is non-NULL. Put a dummy
// tree in its place.
//
newTree = new avtDataTree();
}
SetOutputDataTree(newTree);
}
bool
avtResampleFilter::InputNeedsNoResampling(void)
{
avtDataTree_p inDT = GetInputDataTree();
//
// permit VTK_POLY_DATA to pass through unchanged
//
#if 0
int n = 0;
vtkDataSet **in_dss = inDT->GetAllLeaves(n);
if (n && in_dss && in_dss[0] && in_dss[0]->GetDataObjectType() == VTK_POLY_DATA)
{
// Free the memory from the GetAllLeaves function call.
delete [] in_dss;
return true;
}
// Free the memory from the GetAllLeaves function call.
delete [] in_dss;
#endif
return false;
}
void
avtDatasetToDataObjectFilter::PreExecute(void)
{
avtFilter::PreExecute();
// Here we check if the filter we are about to execute can
// understand rectilinear grids with implied transforms set
// in the data attributes. If the filter can't, then we need
// to apply the transform to the rectilinear grid, converting
// it into a curvilinear grid.
avtDataAttributes &inatts = GetInput()->GetInfo().GetAttributes();
if (inatts.GetRectilinearGridHasTransform() &&
!FilterUnderstandsTransformedRectMesh())
{
debug3 << "avtDatasetToDataObjectFilter transforming rectilinear grid"
<< " to curvilinear grid." << endl;
avtDataTree_p tree = GetInputDataTree();
bool dummy;
tree->Traverse(CApplyTransformToRectGrid,
(void*)inatts.GetRectilinearGridTransform(), dummy);
// since we transformed the input, we need to change the input
// data attributes
inatts.SetRectilinearGridHasTransform(false);
// ... and if we already copied the input data atts to the output,
// we need to also update the output data attributes
avtDataAttributes &outatts = GetOutput()->GetInfo().GetAttributes();
outatts.SetRectilinearGridHasTransform(false);
}
}
void
avtLCSFilter::CreateNativeMeshIterativeCalcOutput(std::vector<avtIntegralCurve*> &ics)
{
//accumulate all of the points then do jacobian?
//or do jacobian then accumulate?
//picking the first.
int offset = 0;
double minv = std::numeric_limits<double>::max();
double maxv = -std::numeric_limits<double>::max();
int count = 0;
CreateMultiBlockIterativeCalcOutput(GetInputDataTree(), GetDataTree(),
ics, offset, minv, maxv, count);
int nTuples = (int) ics.size();
if( 1 || count <= nTuples/10 )
{
if( minSizeValue == std::numeric_limits<double>::max() )
minSizeValue = 0.0;
if( maxSizeValue == -std::numeric_limits<double>::max() )
maxSizeValue = 0.0;
char str[1028];
SNPRINTF(str, 1028, "\n%d%% of the nodes (%d of %d nodes) "
"exaimed produced a valid exponent (%f to %f). "
"This may be due to too large of a size limit (%f), "
"too small of an integration step (%f), or "
"too few integration steps (%d out of %d where taken), or "
"simply due to the nature of the data. "
"The size range was from %f to %f. ",
(int) (100.0 * (double) count / (double) nTuples),
count, nTuples,
minv, maxv,
maxSize, maxStepLength, numSteps, maxSteps,
minSizeValue, maxSizeValue );
avtCallback::IssueWarning(str);
}
avtDataAttributes &dataatts = GetOutput()->GetInfo().GetAttributes();
avtExtents* e = dataatts.GetThisProcsActualDataExtents();
double range[2];
range[0] = minv;
range[1] = maxv;
e->Set(range);
e = dataatts.GetThisProcsOriginalDataExtents();
e->Set(range);
e = dataatts.GetThisProcsActualSpatialExtents();
e->Set(global_bounds);
e = dataatts.GetThisProcsOriginalSpatialExtents();
e->Set(global_bounds);
}
void
avtTimeIteratorDataTreeIteratorExpression::FinalizeOutput(void)
{
avtDataTree_p tree = GetInputDataTree();
arrayIndex = 0;
avtDataTree_p rv = ConstructOutput(tree);
SetOutputDataTree(rv);
}
void
avtDataTreeIteratorPreprocessor::Preprocess(void)
{
avtDataTree_p tree = GetInputDataTree();
int totalNodes = tree->GetNumberOfLeaves();
debug3 << "Preprocessing with " << totalNodes << " nodes." << endl;
Initialize(totalNodes);
debug3 << "Preprocessing the top level tree" << endl;
PreprocessTree(tree);
debug3 << "Allowing preprocessing module to finalize." << endl;
Finalize();
}
void
avtDatasetQuery::PerformQuery(QueryAttributes *qA)
{
queryAtts = *qA;
Init();
UpdateProgress(0, 0);
//
// Allow derived types to apply any necessary filters.
//
avtDataObject_p dob = ApplyFilters(GetInput());
//
// Reset the input so that we have access to the data tree.
//
SetTypedInput(dob);
avtDataTree_p tree = GetInputDataTree();
int validInputTree = 0;
if (*tree != NULL && !tree->IsEmpty())
{
validInputTree = 1;
totalNodes = tree->GetNumberOfLeaves();
}
else
{
validInputTree |= 0;
totalNodes = 0;
debug4 << "Query encountered EMPTY InputDataTree after ApplyFilters. "
<< "This may be a valid state if running parallel and there "
<< "are more processors than domains." << endl;
}
bool hadError = false;
PreExecute();
TRY
{
Execute(tree);
}
CATCH2(VisItException, e)
{
debug1 << "Exception occurred in " << GetType() << endl;
debug1 << "Going to keep going to prevent a parallel hang." << endl;
queryAtts.SetResultsMessage(e.Message());
hadError = true;
}
avtDataset_p
avtTraceHistoryFilter::InitializeDataset(void)
{
int i, j;
avtDataTree_p inTree = GetInputDataTree();
int nLeaves;
vtkDataSet **ds = inTree->GetAllLeaves(nLeaves);
vtkDataSet **ugrids = new vtkDataSet*[nLeaves];
for (i = 0 ; i < nLeaves ; i++)
{
vtkPoints *pts = vtkVisItUtility::GetPoints(ds[i]);
vtkUnstructuredGrid *ugrid = vtkUnstructuredGrid::New();
ugrid->SetPoints(pts);
int npts = pts->GetNumberOfPoints();
ugrid->Allocate(2*npts);
vtkIdType onevertex[1];
for (j = 0 ; j < npts ; j++)
{
onevertex[0] = j;
ugrid->InsertNextCell(VTK_VERTEX, 1, onevertex);
}
ugrids[i] = ugrid;
pts->Delete();
}
avtDataTree_p newTree = new avtDataTree(nLeaves, ugrids, -1);
for (i = 0 ; i < nLeaves ; i++)
ugrids[i]->Delete();
delete [] ugrids;
avtDataset_p rv = new avtDataset(GetTypedInput(), newTree);
avtDataAttributes &atts = rv->GetInfo().GetAttributes();
int nVars = atts.GetNumberOfVariables();
while (nVars > 0)
{
atts.RemoveVariable(atts.GetVariableName(0));
nVars = atts.GetNumberOfVariables();
}
// Free the memory from the GetAllLeaves function call.
delete [] ds;
return rv;
}
void
avtDatasetToDataObjectFilter::InputSetActiveVariable(const char *varname)
{
SetActiveVariableArgs args;
args.varname = varname;
avtDataTree_p tree = GetInputDataTree();
bool success;
tree->Traverse(CSetActiveVariable, (void *) &args, success);
//
// Set up our data members for derived types that need this information.
//
activeVariableIsPointData = args.activeIsPoint;
hasPointVars = args.hasPointVars;
hasCellVars = args.hasCellVars;
GetInput()->GetInfo().GetAttributes().SetActiveVariable(varname);
}
bool
avtLCSFilter::NativeMeshIterativeCalc(std::vector<avtIntegralCurve*> &ics)
{
int offset = 0;
if( *fsle_dt == NULL )
{
fsle_dt = CreateIterativeCalcDataTree(GetInputDataTree());
if (GetInput()->GetInfo().GetAttributes().DataIsReplicatedOnAllProcessors())
if (PAR_Rank() != 0)
fsle_dt = new avtDataTree();
SetOutputDataTree(fsle_dt);
}
return MultiBlockIterativeCalc(fsle_dt, ics, offset);
}
void
avtTimeIteratorDataTreeIteratorExpression::InitializeOutput(void)
{
avtDataTree_p topTree = GetInputDataTree();
std::vector<avtDataTree_p> treesToProcess;
treesToProcess.push_back(topTree);
size_t curIndex = 0;
vars.clear();
while (curIndex < treesToProcess.size())
{
avtDataTree_p tree = treesToProcess[curIndex];
curIndex++;
if (*tree == NULL)
continue;
int nc = tree->GetNChildren();
if (nc <= 0 && !tree->HasData())
continue;
if (nc == 0)
{
vtkDataSet *in_ds = tree->GetDataRepresentation().GetDataVTK();
vtkDoubleArray *arr = vtkDoubleArray::New();
arr->SetNumberOfComponents(GetIntermediateSize());
if (IsPointVariable())
arr->SetNumberOfTuples(in_ds->GetNumberOfPoints());
else
arr->SetNumberOfTuples(in_ds->GetNumberOfCells());
arr->SetName(outputVariableName);
vars.push_back(arr);
}
else
{
for (int j = 0; j < nc; j++)
if (tree->ChildIsPresent(j))
treesToProcess.push_back(tree->GetChild(j));
}
}
// Set up this counter variable that we use during "ProcessDataTree".
arrayIndex = 0;
}
void
avtExtractPointFunction2DFilter::Execute()
{
// Check consistency
if (atts.GetI().size() != atts.GetJ().size())
{
EXCEPTION1(ImproperUseException,
"I and J arrays need to have the same number of elements.");
}
const size_t num_functions = atts.GetI().size();
std::vector<double*> function_data(num_functions, 0);
bool klInformationSet = false;
double dvpar = 1.0;
double dmu = 1.0;
int v_base_index[2] = { 0, 0 };
int v_dims[2] = { 0, 0 };
// Get the input data tree
avtDataTree_p in_tree = GetInputDataTree();
if (in_tree->IsEmpty())
{
SetOutputDataTree(in_tree);
return;
}
int nLeaves = 0;
vtkDataSet **leaves = in_tree->GetAllLeaves(nLeaves);
// Get all data sets
// FIXME: Structured grids should be simple as well
vtkRectilinearGrid *rgrid = 0; // HACK: This just uses the last instance
vtkDataArray *data = 0; // HACK: This just uses the last instance
for (int i = 0; i < nLeaves; ++i)
{
// Ensure that we are working on rectilinear grid
rgrid = dynamic_cast<vtkRectilinearGrid*>(leaves[i]);
if (!rgrid)
EXCEPTION1(ImproperUseException,
"Can only extract point function for a rectilinear grid.");
// Dimensions of data set
int dims[3];
rgrid->GetDimensions(dims);
// We want number of cells as grid dimension, not number of samples
for (int d=0; d<3; ++d)
dims[d]--;
vtkIntArray *arr = dynamic_cast<vtkIntArray*>(rgrid->GetFieldData()->GetArray("base_index"));
int base_index[3] = { 0, 0, 0 };
if (arr)
for (int d = 0; d < 3; ++d)
base_index[d] = arr->GetValue(d);
int i_min = base_index[0];
int i_max = base_index[0] + dims[0] - 1;
int j_min = base_index[1];
int j_max = base_index[1] + dims[1] - 1;
// FIXME: Take avtRealDims into account
// arr = dynamic_cast<vtkIntArray*>(rgrid->GetFieldData()->GetArray("avtRealDims"));
// int avtRealDims[6] = { 0, 0, 0, 0, 0, 0 };
// if (arr)
// for (int d = 0; d < 6; ++d)
// avtRealDims[d] = arr->GetValue(d);
vtkDoubleArray *dx_arr = dynamic_cast<vtkDoubleArray*>(rgrid->GetFieldData()->GetArray("dx_array"));
vtkIntArray *v_base_index_arr = dynamic_cast<vtkIntArray*>(rgrid->GetFieldData()->GetArray("v_base_index"));
vtkIntArray *v_dims_arr = dynamic_cast<vtkIntArray*>(rgrid->GetFieldData()->GetArray("v_dims"));
const char *justTheVar = pipelineVariable + strlen("operators/ExtractPointFunction2D/");
if (!klInformationSet)
{
if (dx_arr)
{
dvpar = dx_arr->GetValue(0);
dmu = dx_arr->GetValue(1);
}
if (v_base_index_arr && v_dims_arr)
{
for (int i = 0; i < 2; ++i)
{
v_base_index[i] = v_base_index_arr->GetValue(i);
v_dims[i] = v_dims_arr->GetValue(i);
}
}
else
{
EXCEPTION1(ImproperUseException,
"Internal error: Velocity base index and dimensions not set by database plugin.");
}
}
else
{
if (dx_arr)
{
if (dvpar != dx_arr->GetValue(0))
EXCEPTION1(ImproperUseException, "Internal error: dvpar mismatch.");
if (dmu != dx_arr->GetValue(1))
EXCEPTION1(ImproperUseException, "Internal error: dmu mismatch.");
}
if (v_base_index_arr && v_dims_arr)
{
for (int i = 0; i < 2; ++i)
{
if (v_base_index[i] != v_base_index_arr->GetValue(i))
EXCEPTION1(ImproperUseException, "Internal error: v_base_index mismatch.");
if (v_dims[i] != v_dims_arr->GetValue(i))
EXCEPTION1(ImproperUseException, "Internal error: v_dims mismatch.");
}
}
}
data = rgrid->GetCellData()->GetArray(justTheVar); // FIXME HACK: Outside for loop to ensure that processor 0 has a data pointer
if (!data)
{
EXCEPTION1(VisItException, "Internal error: Could not get data for array variable (maybe due to an operator requesting ghost zones).");
}
const std::vector<int> &i_vals = atts.GetI();
const std::vector<int> &j_vals = atts.GetJ();
for (size_t curr_tuple = 0; curr_tuple < i_vals.size(); ++curr_tuple)
if (i_min <= i_vals[curr_tuple] && i_vals[curr_tuple] <= i_max && j_min <= j_vals[curr_tuple] && j_vals[curr_tuple] <= j_max)
{
int ijk_f[3] = { i_vals[curr_tuple] - base_index[0], j_vals[curr_tuple] - base_index[1], 0 };
vtkIdType id_f = rgrid->ComputeCellId(ijk_f);
function_data[curr_tuple] = new double[v_dims[0]*v_dims[1]];
for (vtkIdType comp = 0; comp < v_dims[0]*v_dims[1]; ++comp)
function_data[curr_tuple][comp] = data->GetComponent(id_f, comp);
}
}
#ifdef PARALLEL
// Determine (on processor 0) where data resides
std::vector<int> function2proc_map(function_data.size(), -1);
for (size_t curr_func = 0; curr_func < function_data.size(); ++curr_func)
if (function_data[curr_func]) function2proc_map[curr_func] = PAR_Rank();
std::vector<int> tmp_function2proc_map(function2proc_map);
MPI_Reduce(&tmp_function2proc_map[0], &function2proc_map[0], function2proc_map.size(), MPI_INT, MPI_MAX, 0, VISIT_MPI_COMM);
// HACK: Send all data to processor 0
// FIXME: Better distribution among processors
// FIXME: Non-blocking send/receive
if (PAR_Rank() == 0)
{
for (size_t curr_func = 0; curr_func < function_data.size(); ++curr_func)
if (function2proc_map[curr_func] >= 1)
{
function_data[curr_func] = new double[v_dims[0]*v_dims[1]];
MPI_Status status;
MPI_Recv(function_data[curr_func], v_dims[0]*v_dims[1], MPI_DOUBLE, function2proc_map[curr_func], MPI_ANY_TAG, VISIT_MPI_COMM, &status);
}
}
else
{
for (size_t curr_func = 0; curr_func < function_data.size(); ++curr_func)
if (function_data[curr_func])
MPI_Send(function_data[curr_func], v_dims[0]*v_dims[1], MPI_DOUBLE, 0, 0, VISIT_MPI_COMM);
}
if (PAR_Rank() == 0)
{
#endif
vtkRectilinearGrid *ogrid = vtkRectilinearGrid::New();
ogrid->SetDimensions(v_dims[0]+1, v_dims[1]+1, function_data.size());
vtkDataArray *xCoords = rgrid->GetXCoordinates()->NewInstance();
xCoords->SetNumberOfTuples(v_dims[0]+1);
for (int k = 0; k < v_dims[0]+1; ++k)
xCoords->SetTuple1(k, (v_base_index[0]+k)*dvpar);
ogrid->SetXCoordinates(xCoords);
xCoords->Delete();
vtkDataArray *yCoords = rgrid->GetXCoordinates()->NewInstance();
yCoords->SetNumberOfTuples(v_dims[1]+1);
for (int l = 0; l < v_dims[1]+1; ++l)
yCoords->SetTuple1(l, (v_base_index[1]+l)*dmu);
ogrid->SetYCoordinates(yCoords);
yCoords->Delete();
vtkDataArray *zCoords = rgrid->GetXCoordinates()->NewInstance();
zCoords->SetNumberOfTuples(function_data.size());
for (int f = 0; f < function_data.size(); ++f)
zCoords->SetTuple1(f, f);
ogrid->SetZCoordinates(zCoords);
zCoords->Delete();
// FIXME: v_base_index, dvpar and dmu are only defined if there is any data on rank 0
spatialExtents[0] = v_base_index[0] * dvpar;
spatialExtents[1] = (v_base_index[0] + v_dims[0]) * dvpar;
spatialExtents[2] = v_base_index[1] * dmu;
spatialExtents[3] = (v_base_index[1] + v_dims[1]) * dmu;
spatialExtents[4] = 0;
spatialExtents[5] = function_data.size() - 1;
// FIXME: data is only defined if there is any data on rank 0
vtkDataArray *odata = data->NewInstance();
odata->SetNumberOfComponents(1);
odata->SetNumberOfTuples(v_dims[0]*v_dims[1]*function_data.size());
for (int k = 0; k < v_dims[0]; ++k)
for (int l = 0; l < v_dims[1]; ++l)
for (int f = 0; f < function_data.size(); ++f)
{
int ijk_t[3] = { k, l, f };
vtkIdType id_t = ogrid->ComputeCellId(ijk_t);
double val = function_data[f] ? function_data[f][k*v_dims[1]+l] : 0;
odata->SetTuple1(id_t, val);
if (val < range[0]) range[0] = val;
if (val > range[1]) range[1] = val;
}
odata->SetName(outVarName.c_str());
ogrid->GetCellData()->SetScalars(odata);
odata->Delete();
#if 0
vtkDataSetWriter *wrtr = vtkDataSetWriter::New();
wrtr->SetFileTypeToASCII();
wrtr->SetInputData(ogrid);
wrtr->SetFileName("debug.vtk");
wrtr->Write();
#endif
SetOutputDataTree(new avtDataTree(ogrid, 1));
#ifdef PARALLEL
}
else
{
SetOutputDataTree(new avtDataTree());
}
#endif
for (std::vector<double*>::iterator it = function_data.begin(); it != function_data.end(); ++it)
delete[] *it;
}
void
avtMultiCurveFilter::Execute(void)
{
//
// Get the input data tree to obtain the data sets.
//
avtDataTree_p tree = GetInputDataTree();
//
// Get the data sets.
//
int nSets;
vtkDataSet **dataSets = tree->GetAllLeaves(nSets);
//
// Get the domain ids.
//
std::vector<int> domains;
tree->GetAllDomainIds(domains);
//
// If we have 1 data set then it is a rectilinear grid and this routine
// will convert it to polydata, if we have more than one data set then
// it is has already been converted to poly data and we will just pass
// it along.
//
if (nSets < 1)
{
// Free the memory from the GetAllLeaves function call.
delete [] dataSets;
EXCEPTION1(ImproperUseException, "Expecting at least one dataset");
}
else if (nSets > 1)
{
for (int i = 0; i < nSets; i++)
{
if (dataSets[i]->GetDataObjectType() != VTK_POLY_DATA)
{
// Free the memory from the GetAllLeaves function call.
delete [] dataSets;
EXCEPTION1(ImproperUseException, "Expecting poly data");
}
}
SetOutputDataTree(tree);
setYAxisTickSpacing = false;
// Free the memory from the GetAllLeaves function call.
delete [] dataSets;
return;
}
vtkDataSet *inDS = dataSets[0];
// Free the memory from the GetAllLeaves function call.
delete [] dataSets;
int domain = domains[0];
if (inDS->GetDataObjectType() != VTK_RECTILINEAR_GRID)
{
EXCEPTION1(ImproperUseException, "Expecting a rectilinear grid");
}
vtkRectilinearGrid *grid = vtkRectilinearGrid::SafeDownCast(inDS);
if (grid->GetDataDimension() != 2)
{
EXCEPTION1(ImproperUseException, "Expecting a 2D grid");
}
int dims[3];
grid->GetDimensions(dims);
int nx = dims[0];
int ny = dims[1];
if (ny > 16)
{
avtCallback::IssueWarning("The MultiCurve plot only allows up to "
"16 curves, displaying the first 16 curves.");
ny = 16;
}
vtkDataArray *xpts = grid->GetXCoordinates();
vtkDataArray *ypts = grid->GetYCoordinates();
int ptype = VTK_FLOAT;
if (xpts->GetDataType() == VTK_DOUBLE ||
ypts->GetDataType() == VTK_DOUBLE)
ptype = VTK_DOUBLE;
vtkDataArray *var = inDS->GetPointData()->GetScalars();
if (var == NULL)
{
EXCEPTION1(ImproperUseException, "No point data");
}
if (var->GetNumberOfComponents() != 1)
{
EXCEPTION1(ImproperUseException, "Expecting a scalar variable");
}
vtkDataArray *var2 = NULL;
if (atts.GetMarkerVariable() != "default")
var2 = inDS->GetPointData()->GetArray(atts.GetMarkerVariable().c_str());
vtkDataArray *var3 = NULL;
if (atts.GetIdVariable() != "default")
var3 = inDS->GetPointData()->GetArray(atts.GetIdVariable().c_str());
//
// Create the data sets and labels for each of the curves.
//
vtkDataSet **out_ds = new vtkDataSet*[ny];
std::vector<std::string> labels;
//
// Calculate the scale. If the user has specified the Y axis range use
// that, otherwise use the range of the data.
//
double scale;
double nTicks = floor(30./ny-1.);
double tickSize = ny / 60.;
if (atts.GetUseYAxisTickSpacing())
{
scale = tickSize / atts.GetYAxisTickSpacing();
yAxisTickSpacing = atts.GetYAxisTickSpacing();
}
else
{
double yMin, yMax;
if (var2 == NULL)
{
yMin = var->GetTuple1(0);
yMax = var->GetTuple1(0);
for (int i = 1; i < nx * ny; i++)
{
double v = var->GetTuple1(i);
yMin = yMin < v ? yMin : v;
yMax = yMax > v ? yMax : v;
}
}
else
{
yMin = 1.;
yMax = 1.;
int i;
for (i = 0; i < nx * ny && var2->GetTuple1(i) < 0.; i++)
/* do nothing */;
if (i < nx * ny)
{
yMin = var->GetTuple1(i);
yMax = var->GetTuple1(i);
for (; i < nx * ny; i++)
{
if (var2->GetTuple1(i) >= 0.)
{
double v = var->GetTuple1(i);
yMin = yMin < v ? yMin : v;
yMax = yMax > v ? yMax : v;
}
}
}
}
double yAbsMax = fabs(yMin) > fabs(yMax) ? fabs(yMin) : fabs(yMax);
scale = 1. / yAbsMax * nTicks * tickSize;
yAxisTickSpacing = yAbsMax / nTicks;
}
setYAxisTickSpacing = true;
stringVector inLabels;
GetInput()->GetInfo().GetAttributes().GetLabels(inLabels);
for (int i = 0; i < ny; i++)
{
//
// Create the data set.
//
vtkPoints *points = vtkPoints::New(ptype);
//
// Create the array specifying the curve markers.
//
vtkIntArray *symbols = vtkIntArray::New();
symbols->SetName("CurveSymbols");
symbols->SetNumberOfComponents(1);
symbols->SetNumberOfTuples(nx);
int *sbuf = symbols->GetPointer(0);
//
// Create the array specifying the curve ids.
//
vtkIntArray *ids = vtkIntArray::New();
ids->SetName("CurveIds");
ids->SetNumberOfComponents(1);
ids->SetNumberOfTuples(nx);
int *ibuf = ids->GetPointer(0);
double xLine[3];
xLine[2] = 0.0;
int npts = 0;
for (int j = 0; j < nx; j++)
{
if (var2 == NULL || var2->GetTuple1(i*nx+j) >= 0.)
{
xLine[0] = xpts->GetTuple1(j);
xLine[1] = (double)i + 0.5 + var->GetTuple1(i*nx+j) * scale;
points->InsertNextPoint(xLine);
// curve markers
if (var2 == NULL)
sbuf[npts] = 0;
else
sbuf[npts] = int(var2->GetTuple1(i*nx+j));
// curve ids
if (var3 == NULL)
ibuf[npts] = i*nx+j;
else
ibuf[npts] = int(var3->GetTuple1(i*nx+j));
npts++;
}
}
vtkCellArray *lines = vtkCellArray::New();
if (npts == 1)
{
vtkIdType vtkPointIDs[1];
vtkPointIDs[0] = 0;
lines->InsertNextCell(1, vtkPointIDs);
}
else if (npts > 1)
{
for (int j = 0; j < npts - 1; j++)
{
vtkIdType vtkPointIDs[2];
vtkPointIDs[0] = j;
vtkPointIDs[1] = j + 1;
lines->InsertNextCell(2, vtkPointIDs);
}
}
//
// Create the data set.
//
vtkPolyData *polyData = vtkPolyData::New();
polyData->SetLines(lines);
polyData->SetPoints(points);
polyData->GetPointData()->AddArray(symbols);
polyData->GetPointData()->CopyFieldOn("CurveSymbols");
polyData->GetPointData()->AddArray(ids);
polyData->GetPointData()->CopyFieldOn("CurveIds");
lines->Delete();
points->Delete();
symbols->Delete();
ids->Delete();
out_ds[i] = polyData;
//
// Create the label.
//
if(inLabels.size() != (size_t)ny)
{
char label[80];
SNPRINTF(label, 80, atts.GetYAxisTitleFormat().c_str(),
ypts->GetTuple1(i));
labels.push_back(label);
}
else
labels.push_back(inLabels[i]);
}
//
// Turn the data sets into a data tree.
//
avtDataTree_p outDT = NULL;
outDT = new avtDataTree(ny, out_ds, domain, labels);
for (int i = 0; i < ny; i++)
{
out_ds[i]->Delete();
}
delete [] out_ds;
//
// Set the levels for the level mapper.
//
GetOutput()->GetInfo().GetAttributes().SetLabels(labels);
SetOutputDataTree(outDT);
}
void
avtDataBinningFilter::Execute(void)
{
ConstructDataBinningAttributes dba = atts.CreateConstructionAtts();
std::vector<double> bb = dba.GetBinBoundaries();
if (! atts.GetDim1SpecifyRange())
{
if (atts.GetDim1BinBasedOn() == DataBinningAttributes::Variable)
{
std::string v1name = atts.GetDim1Var();
if (v1name == "default")
v1name = pipelineVariable;
double range[2];
GetDataExtents(range, v1name.c_str());
bb[0] = range[0];
bb[1] = range[1];
}
else
{
int dim = (atts.GetDim1BinBasedOn()-DataBinningAttributes::X);
double range[6];
GetSpatialExtents(range);
bb[0] = range[2*dim];
bb[1] = range[2*dim+1];
}
}
if ((! atts.GetDim2SpecifyRange()) && (atts.GetNumDimensions() == DataBinningAttributes::Two ||
atts.GetNumDimensions() == DataBinningAttributes::Three))
{
if (atts.GetDim2BinBasedOn() == DataBinningAttributes::Variable)
{
std::string v2name = atts.GetDim2Var();
if (v2name == "default")
v2name = pipelineVariable;
double range[2];
GetDataExtents(range, v2name.c_str());
bb[2] = range[0];
bb[3] = range[1];
}
else
{
int dim = (atts.GetDim2BinBasedOn()-DataBinningAttributes::X);
double range[6];
GetSpatialExtents(range);
bb[2] = range[2*dim];
bb[3] = range[2*dim+1];
}
}
if ((! atts.GetDim3SpecifyRange()) && atts.GetNumDimensions() == DataBinningAttributes::Three)
{
if (atts.GetDim3BinBasedOn() == DataBinningAttributes::Variable)
{
std::string v3name = atts.GetDim3Var();
if (v3name == "default")
v3name = pipelineVariable;
double range[2];
GetDataExtents(range, v3name.c_str());
bb[4] = range[0];
bb[5] = range[1];
}
else
{
int dim = (atts.GetDim3BinBasedOn()-DataBinningAttributes::X);
double range[6];
GetSpatialExtents(range);
bb[4] = range[2*dim];
bb[5] = range[2*dim+1];
}
}
dba.SetBinBoundaries(bb);
avtDataBinningConstructor dbc;
dbc.SetInput(GetInput());
avtDataBinning *d = dbc.ConstructDataBinning(&dba, lastContract, false);
if (atts.GetOutputType() == DataBinningAttributes::OutputOnBins)
{
if (PAR_Rank() == 0)
{
vtkDataSet *ds = d->CreateGrid();
if (atts.GetNumDimensions() == DataBinningAttributes::One)
ds->GetPointData()->GetScalars()->SetName(varname.c_str());
else
ds->GetCellData()->GetScalars()->SetName(varname.c_str());
ds->GetCellData()->SetActiveScalars(varname.c_str());
SetOutputDataTree(new avtDataTree(ds, -1));
double range[2] = { FLT_MAX, -FLT_MAX };
GetDataRange(ds, range, varname.c_str(), false);
avtDataAttributes &dataAtts = GetOutput()->GetInfo().GetAttributes();
dataAtts.GetThisProcsOriginalDataExtents(varname.c_str())->Set(range);
dataAtts.GetThisProcsActualDataExtents(varname.c_str())->Set(range);
ds->Delete();
}
else
SetOutputDataTree(new avtDataTree());
avtDataAttributes &dataAtts = GetOutput()->GetInfo().GetAttributes();
int dim = ( (atts.GetNumDimensions() == DataBinningAttributes::One) ? 1
: ((atts.GetNumDimensions() == DataBinningAttributes::Two) ? 2 : 3));
dataAtts.GetThisProcsOriginalSpatialExtents()->Set(&bb[0]);
dataAtts.GetOriginalSpatialExtents()->Set(&bb[0]);
}
else if (atts.GetOutputType() == DataBinningAttributes::OutputOnInputMesh)
{
double range[2] = { FLT_MAX, -FLT_MAX };
bool hadError = false;
avtDataTree_p tree = CreateArrayFromDataBinning(GetInputDataTree(), d, range, hadError);
if (UnifyMaximumValue((int) hadError) > 0)
{
avtCallback::IssueWarning("The data binning could not be placed on the input "
"mesh. This is typically because the data binning is over different "
"centerings (zonal and nodal) and can not be meaningfully placed back "
"on the input mesh. Try recentering one of the variables to remove "
"this ambiguity.");
SetOutputDataTree(new avtDataTree());
}
else
{
SetOutputDataTree(tree);
avtDataAttributes &dataAtts = GetOutput()->GetInfo().GetAttributes();
dataAtts.GetThisProcsOriginalDataExtents(varname.c_str())->Set(range);
dataAtts.GetThisProcsActualDataExtents(varname.c_str())->Set(range);
}
}
delete d;
}
vtkDataSet *
avtDatasetOnDemandFilter::GetDataAroundPoint(double X, double Y, double Z,
int timeStep)
{
if (DebugStream::Level1())
{
debug1<<"avtDatasetOnDemandFilter::GetDataAroundPoint("<<X<<", "<<Y<<", "<<Z<<", "<<timeStep<<");"<<endl;
}
if ( ! OperatingOnDemand() )
{
EXCEPTION0(ImproperUseException);
}
int domainId = 0; //Need to hash XYZ to domainId ???
// FIXME: For the moment we just use one domain ID (0) for all points. This choice will cause
// the following for loop to test *all* cache entries whether they contain the point location.
// This strategy is not very efficient, but better than a pipeline re-execute.
if (DebugStream::Level5())
{
debug5<<"Look in cache: "<<domainId<<" sz= "<<domainQueue.size()<<endl;
}
//See if it's in the cache.
std::list<DomainCacheEntry>::iterator it;
int foundPos = 0;
for ( it = domainQueue.begin(); it != domainQueue.end(); it++ )
{
// Found it. Move it to the front of the list.
if (it->domainID == domainId &&
it->timeStep == timeStep)
{
//Do a bbox check.
double bbox[6];
it->ds->GetBounds(bbox);
if (DebugStream::Level5())
{
debug5<<"BBOX ["<<bbox[0]<<", "<<bbox[1]<<"]["<<bbox[2]<<", "<<bbox[3]<<"]["<<bbox[4]<<", "<<bbox[5]<<"]"<<endl;
}
if (! (X >= bbox[0] && X <= bbox[1] &&
Y >= bbox[2] && Y <= bbox[3] &&
Z >= bbox[4] && Z <= bbox[5]))
continue;
bool foundIt = false;
// If rectilinear, we found the domain.
if (it->ds->GetDataObjectType() == VTK_RECTILINEAR_GRID)
foundIt = true;
else
{
//Do a cell check....
if (DebugStream::Level5())
{
debug5<<"It's in the bbox. Check the cell.\n";
}
vtkVisItCellLocator *cellLocator = it->cl;
if ( cellLocator == NULL )
{
cellLocator = vtkVisItCellLocator::New();
cellLocator->SetDataSet(it->ds);
cellLocator->IgnoreGhostsOn();
cellLocator->BuildLocator();
it->cl = cellLocator;
}
double rad = 1e-6, dist=0.0;
double p[3] = {X,Y,Z}, resPt[3]={0.0,0.0,0.0};
vtkIdType foundCell = -1;
int subId = 0;
if (cellLocator->FindClosestPointWithinRadius(p, rad, resPt,
foundCell, subId, dist))
{
foundIt = true;
if (DebugStream::Level5())
{
debug5<<"Cell locate: We found the domain!\n";
}
}
}
if (foundIt)
{
if (DebugStream::Level5())
{
debug5<<"Found data in cace, returning cache entry " << foundPos << std::endl;
}
DomainCacheEntry entry;
entry = *it;
//Remove, then move to front.
domainQueue.erase( it );
domainQueue.push_front( entry );
return entry.ds;
}
}
}
if (DebugStream::Level5())
{
debug5<<" Update->GetDataAroundPoint, time= "<<timeStep<<endl;
}
avtContract_p new_contract = new avtContract(firstContract);
new_contract->GetDataRequest()->GetRestriction()->TurnOnAll();
avtPointSelection *ptsel = new avtPointSelection;
double p[3] = { X, Y, Z };
ptsel->SetPoint(p);
// data selection will be deleted by contract.
new_contract->GetDataRequest()->AddDataSelection(ptsel);
new_contract->GetDataRequest()->SetTimestep(timeStep);
new_contract->SetOnDemandStreaming(true);
GetInput()->Update(new_contract);
vtkDataSet *rv = GetInputDataTree()->GetSingleLeaf();
if( rv )
{
// Add it to the cache.
DomainCacheEntry entry;
entry.domainID = domainId;
entry.timeStep = timeStep;
entry.ds = rv;
entry.cl = NULL;
rv->Register(NULL);
loadDSCount++;
domainQueue.push_front(entry);
if ( domainQueue.size() > (size_t)maxQueueLength )
{
DomainCacheEntry tmp = domainQueue.back();
PurgeDomain( tmp.domainID, tmp.timeStep );
domainQueue.pop_back();
purgeDSCount++;
}
}
return rv;
}
vtkDataSet *
avtDatasetOnDemandFilter::GetDomain(int domainId,
int timeStep)
{
if (DebugStream::Level5())
{
debug5<<"avtDatasetOnDemandFilter::GetDomain("<<domainId<<", "<<timeStep<<");"<<endl;
}
if ( ! OperatingOnDemand() )
EXCEPTION0(ImproperUseException);
if ( domainId < 0 )
return NULL;
// See if it is already in the cache. If so, just return it.
std::list<DomainCacheEntry>::iterator it;
for ( it = domainQueue.begin(); it != domainQueue.end(); it++ )
{
// Found it. Move it to the front of the list.
if (it->domainID == domainId &&
it->timeStep == timeStep)
{
DomainCacheEntry entry;
entry = *it;
//Remove, then move to front.
domainQueue.erase( it );
domainQueue.push_front( entry );
return entry.ds;
}
}
avtSILRestriction_p silr;
if (timeStep == firstContract->GetDataRequest()->GetTimestep())
{
silr = firstContract->GetDataRequest()->GetRestriction();
}
else if ((*lastUsedContract != NULL) &&
(timeStep == lastUsedContract->GetDataRequest()->GetTimestep()))
{
silr = lastUsedContract->GetDataRequest()->GetRestriction();
}
else
{
// The SIL restriction associated with the contract may be for the wrong
// time step. Go get the correct one.
std::string db = GetInput()->GetInfo().GetAttributes().GetFullDBName();
ref_ptr<avtDatabase> dbp = avtCallback::GetDatabase(db, 0, NULL);
if (*dbp == NULL)
EXCEPTION1(InvalidFilesException, db.c_str());
std::string mesh = GetInput()->GetInfo().GetAttributes().GetMeshname();
avtDataObject_p dob = dbp->GetOutput(mesh.c_str(), timeStep);
lastUsedContract = dob->GetOriginatingSource()->GetGeneralContract();
silr = lastUsedContract->GetDataRequest()->GetRestriction();
}
avtDataRequest_p new_dr = new avtDataRequest(firstContract->GetDataRequest(), silr);
avtContract_p new_contract = new avtContract(firstContract, new_dr);
if (DebugStream::Level5())
{
debug5<<" Update->GetDomain "<<domainId<<" time= "<<timeStep<<endl;
}
std::vector<int> domains;
domains.push_back(domainId);
new_contract->GetDataRequest()->GetRestriction()->TurnOnAll();
new_contract->GetDataRequest()->GetRestriction()->RestrictDomains(domains);
new_contract->GetDataRequest()->SetTimestep(timeStep);
new_contract->SetOnDemandStreaming(true);
GetInput()->Update(new_contract);
vtkDataSet *rv = GetInputDataTree()->GetSingleLeaf();
if (rv == NULL)
{
// This issue has been known to occur when:
// -- the SIL is time varying
// -- the domain requested doesn't exist for the initial time step
// (which is the one where the SIL is created from).
EXCEPTION1(VisItException, "Failure retrieving a data set while "
"advecting particles. Please report this to a VisIt "
"developer.");
}
// Add it to the cache.
DomainCacheEntry entry;
entry.domainID = domainId;
entry.timeStep = timeStep;
entry.ds = rv;
rv->Register(NULL);
loadDSCount++;
//Update the domainLoadCount.
//Turn two ints into a long. Put timeStep in upper, domain in lower.
unsigned long long A = (((unsigned long long)timeStep)<<32);
unsigned long long B = ((unsigned long long)domainId);
unsigned long long idx = A | B;
if (domainLoadCount.find(idx) == domainLoadCount.end())
{
domainLoadCount[idx] = 1;
}
else
{
domainLoadCount[idx] ++;
}
domainQueue.push_front(entry);
if ( domainQueue.size() > (size_t)maxQueueLength )
{
DomainCacheEntry tmp = domainQueue.back();
PurgeDomain( tmp.domainID, tmp.timeStep );
domainQueue.pop_back();
purgeDSCount++;
}
return rv;
}
void
avtResampleFilter::ResampleInput(void)
{
int i, j, k;
avtDataset_p output = GetTypedOutput();
double bounds[6] = { 0, 0, 0, 0, 0, 0 };
bool is3D = GetBounds(bounds);
debug4 << "Resampling over space: " << bounds[0] << ", " << bounds[1]
<< ": " << bounds[2] << ", " << bounds[3] << ": " << bounds[4]
<< ", " << bounds[5] << endl;
//
// Our resampling leaves some invalid values in the data range. The
// easiest way to bypass this is to get the data range from the input and
// pass it along (since resampling does not change it in theory).
//
double range[2];
if (GetInput()->GetInfo().GetAttributes().ValidActiveVariable())
{
GetDataExtents(range);
output->GetInfo().GetAttributes().GetDesiredDataExtents()->Set(range);
}
avtViewInfo view;
double scale[3];
CreateViewFromBounds(view, bounds, scale);
//
// What we want the width, height, and depth to be depends on the
// attributes.
//
int width, height, depth;
GetDimensions(width, height, depth, bounds, is3D);
//
// If there are no variables, then just create the mesh and exit.
//
bool thereAreNoVariables =
(GetInput()->GetInfo().GetAttributes().GetNumberOfVariables() <= 0);
if (thereAreNoVariables)
{
if (PAR_Rank() == 0)
{
vtkRectilinearGrid *rg = CreateGrid(bounds, width, height, depth,
0, width, 0, height, cellCenteredOutput, is3D);
avtDataTree_p tree = new avtDataTree(rg, 0);
rg->Delete();
SetOutputDataTree(tree);
}
else
{
//
// Putting in a NULL data tree can lead to seg faults, etc.
//
avtDataTree_p dummy = new avtDataTree();
SetOutputDataTree(dummy);
}
return;
}
//
// World space is a right-handed coordinate system. Image space (as used
// in the sample point extractor) is a left-handed coordinate system.
// This is because large X is at the right and large Y is at the top.
// The z-buffer has the closest points at z=0, so Z is going away from the
// screen ===> left handed coordinate system. If we reflect across X,
// then this will account for the difference between the coordinate
// systems.
//
scale[0] *= -1.;
//
// We don't want an Update to go all the way up the pipeline, so make
// a terminating source corresponding to our input.
//
avtDataset_p ds;
avtDataObject_p dObj = GetInput();
CopyTo(ds, dObj);
avtSourceFromAVTDataset termsrc(ds);
//
// The sample point extractor expects everything to be in image space.
//
avtWorldSpaceToImageSpaceTransform trans(view, scale);
trans.SetInput(termsrc.GetOutput());
bool doKernel =
(GetInput()->GetInfo().GetAttributes().GetTopologicalDimension() == 0);
avtSamplePointExtractor extractor(width, height, depth);
extractor.SendCellsMode(false);
extractor.Set3DMode(is3D);
extractor.SetInput(trans.GetOutput());
if (doKernel)
extractor.SetKernelBasedSampling(true);
avtSamplePoints_p samples = extractor.GetTypedOutput();
//
// If the selection this filter exists to create has already been handled,
// or if there are no pieces for this processor to process, then we can skip
// execution. But, take care to emulate the same collective
// calls other processors may make before returning.
//
if (GetInput()->GetInfo().GetAttributes().GetSelectionApplied(selID))
{
debug1 << "Bypassing Resample operator because database plugin "
"claims to have applied the selection already" << endl;
SetOutputDataTree(GetInputDataTree());
// we can save a lot of time if we know everyone can bypass
if (UnifyMaximumValue(0) == 0)
return;
// here is some dummied up code to match collective calls below
int effectiveVars = samples->GetNumberOfRealVariables();
double *ptrtmp = new double[width*height*depth];
for (int jj = 0; jj < width*height*depth; jj++)
ptrtmp[jj] = -FLT_MAX;
for (i = 0 ; i < effectiveVars ; i++)
Collect(ptrtmp, width*height*depth);
delete [] ptrtmp;
return;
}
else
{
UnifyMaximumValue(1);
}
//
//
// PROBLEM SIZED WORK OCCURS BEYOND THIS POINT
// If you add (or remove) collective calls below this point, make sure to
// put matching sequence into bypass code above
//
//
avtSamplePointCommunicator communicator;
avtImagePartition partition(width, height, PAR_Size(), PAR_Rank());
communicator.SetImagePartition(&partition);
bool doDistributedResample = false;
#ifdef PARALLEL
doDistributedResample = atts.GetDistributedResample();
#endif
if (doDistributedResample)
{
partition.SetShouldProduceOverlaps(true);
avtDataObject_p dob;
CopyTo(dob, samples);
communicator.SetInput(dob);
samples = communicator.GetTypedOutput();
}
// Always set up an arbitrator, even if user selected random.
bool arbLessThan = !atts.GetUseArbitrator() || atts.GetArbitratorLessThan();
std::string arbName = atts.GetArbitratorVarName();
if (arbName == "default")
arbName = primaryVariable;
extractor.SetUpArbitrator(arbName, arbLessThan);
//
// Since this is Execute, forcing an update is okay...
//
samples->Update(GetGeneralContract());
if (samples->GetInfo().GetValidity().HasErrorOccurred())
{
GetOutput()->GetInfo().GetValidity().ErrorOccurred();
GetOutput()->GetInfo().GetValidity().SetErrorMessage(
samples->GetInfo().GetValidity().GetErrorMessage());
}
//
// Create a rectilinear dataset that is stretched according to the
// original bounds.
//
int width_start = 0;
int width_end = width;
int height_start = 0;
int height_end = height;
if (doDistributedResample)
{
partition.GetThisPartition(width_start, width_end, height_start,
height_end);
width_end += 1;
height_end += 1;
}
//
// If we have more processors than domains, we have to handle that
// gracefully. Communicate how many variables there are so that those
// that don't have data can play well.
//
int realVars = samples->GetNumberOfRealVariables();
int numArrays = realVars;
if (doKernel)
numArrays++;
vtkDataArray **vars = new vtkDataArray*[numArrays];
for (i = 0 ; i < numArrays ; i++)
{
vars[i] = vtkDoubleArray::New();
if (doKernel && (i == numArrays-1))
vars[i]->SetNumberOfComponents(1);
else
{
vars[i]->SetNumberOfComponents(samples->GetVariableSize(i));
vars[i]->SetName(samples->GetVariableName(i).c_str());
}
}
if (doKernel)
samples->GetVolume()->SetUseKernel(true);
avtImagePartition *ip = NULL;
if (doDistributedResample)
ip = &partition;
// We want all uncovered regions to get the default value. That is
// what the first argument of GetVariables is for. But if the
// default value is large, then it will screw up the collect call below,
// which uses MPI_MAX for an all reduce. So give uncovered regions very
// small values now (-FLT_MAX) and then replace them later.
double defaultPlaceholder = -FLT_MAX;
samples->GetVolume()->GetVariables(defaultPlaceholder, vars,
numArrays, ip);
if (!doDistributedResample)
{
//
// Collect will perform the parallel collection. Does nothing in
// serial. This will only be valid on processor 0.
//
for (i = 0 ; i < numArrays ; i++)
{
double *ptr = (double *) vars[i]->GetVoidPointer(0);
Collect(ptr, vars[i]->GetNumberOfComponents()*width*height*depth);
}
}
// Now replace the -FLT_MAX's with the default value. (See comment above.)
for (i = 0 ; i < numArrays ; i++)
{
int numTups = vars[i]->GetNumberOfComponents()
* vars[i]->GetNumberOfTuples();
if (numTups > 0)
{
double *ptr = (double *) vars[i]->GetVoidPointer(0);
for (j = 0 ; j < numTups ; j++)
ptr[j] = (ptr[j] == defaultPlaceholder
? atts.GetDefaultVal()
: ptr[j]);
}
}
bool iHaveData = false;
if (doDistributedResample)
iHaveData = true;
if (PAR_Rank() == 0)
iHaveData = true;
if (height_end > height)
iHaveData = false;
if (iHaveData)
{
vtkRectilinearGrid *rg = CreateGrid(bounds, width, height, depth,
width_start, width_end, height_start,
height_end, cellCenteredOutput, is3D);
if (doKernel)
{
double min_weight = avtPointExtractor::GetMinimumWeightCutoff();
vtkDataArray *weights = vars[numArrays-1];
int numVals = weights->GetNumberOfTuples();
for (i = 0 ; i < realVars ; i++)
{
for (j = 0 ; j < vars[i]->GetNumberOfComponents() ; j++)
{
for (k = 0 ; k < numVals ; k++)
{
double weight = weights->GetTuple1(k);
if (weight <= min_weight)
vars[i]->SetComponent(k, j, atts.GetDefaultVal());
else
vars[i]->SetComponent(k, j,
vars[i]->GetComponent(k, j) / weight);
}
}
}
}
//
// Attach these variables to our rectilinear grid.
//
for (i = 0 ; i < realVars ; i++)
{
const char *varname = vars[i]->GetName();
if (strcmp(varname, primaryVariable) == 0)
{
if (vars[i]->GetNumberOfComponents() == 3)
if (cellCenteredOutput)
rg->GetCellData()->SetVectors(vars[i]);
else
rg->GetPointData()->SetVectors(vars[i]);
else if (vars[i]->GetNumberOfComponents() == 1)
{
if (cellCenteredOutput)
{
rg->GetCellData()->AddArray(vars[i]);
rg->GetCellData()->SetScalars(vars[i]);
}
else
{
rg->GetPointData()->AddArray(vars[i]);
rg->GetPointData()->SetScalars(vars[i]);
}
}
else
{
if (cellCenteredOutput)
rg->GetCellData()->AddArray(vars[i]);
else
rg->GetPointData()->AddArray(vars[i]);
}
}
else
{
if (cellCenteredOutput)
rg->GetCellData()->AddArray(vars[i]);
else
rg->GetPointData()->AddArray(vars[i]);
}
}
avtDataTree_p tree = new avtDataTree(rg, 0);
rg->Delete();
SetOutputDataTree(tree);
}
else
{
//
// Putting in a NULL data tree can lead to seg faults, etc.
//
avtDataTree_p dummy = new avtDataTree();
SetOutputDataTree(dummy);
}
for (i = 0 ; i < numArrays ; i++)
{
vars[i]->Delete();
}
delete [] vars;
}
void
avtDatasetToVTKDatasetFilter::Execute(avtDomainList *dl)
{
int i;
//
// We previously set the dataset that was naturally the output of the
// append filter as the output of the bridge. Because VTK does not want
// to have two objects share that output, it has code under the covers
// that removes the dataset as output from the append filter. Restore
// that now.
//
appendFilter->SetOutput(bridge->GetOutput());
//
// Remove all of the inputs from the appender. Count down so there are
// no issues with the array being squeezed and indices changing.
//
int numInputs = appendFilter->GetNumberOfInputs();
for (i = numInputs-1 ; i >= 0 ; i--)
{
vtkDataSet *ds = appendFilter->GetInput(i);
if (ds != NULL)
{
appendFilter->RemoveInput(ds);
}
}
//
// Set the input to the appender to fit with the domain list.
//
avtDataTree_p tree = GetInputDataTree();
int nc = tree->GetNChildren();
int nd = dl->NumDomains();
if (nd != nc)
{
EXCEPTION2(IncompatibleDomainListsException, nd, nc);
}
for (i = 0 ; i < dl->NumDomains() ; i++)
{
if (dl->Domain(i) && tree->ChildIsPresent(i))
{
bool dummy;
tree->GetChild(i)->Traverse(CAddInputToAppendFilter,
appendFilter, dummy);
}
}
//
// Force an execution of the append filter. We set all of the input to its
// inputs as NULL, so we don't have to worry about it trying to go back up
// the (most certainly defunct) pipeline.
//
appendFilter->Update();
//
// The output of the bridge and the append filter is shared. Give it back
// to the bridge, so our pipeline will work properly.
//
bridge->SetOutput(appendFilter->GetOutput());
}
void
avtTimeLoopCollectorFilter::Execute()
{
trees.push_back(GetInputDataTree());
}
void
avtPythonExpression::Execute()
{
//
// the real outputVariableName is not avalaible until well after
// ProcessArguments is called - set it here so the filter can use the
// the proper output name.
//
pyEnv->Filter()->SetAttribute("output_var_name",std::string(outputVariableName));
// get input data tree to obtain datasets
avtDataTree_p tree = GetInputDataTree();
// holds number of datasets
int nsets;
// get datasets
vtkDataSet **data_sets = tree->GetAllLeaves(nsets);
// get dataset domain ids
std::vector<int> domain_ids;
tree->GetAllDomainIds(domain_ids);
// create a tuple holding to hold the datasets
PyObject *py_dsets = PyTuple_New(nsets);
PyObject *py_domids = PyTuple_New(nsets);
if(py_dsets == NULL || py_domids == NULL)
{
delete [] data_sets;
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable to create execution input lists");
}
// array to hold output leaves
avtDataTree_p *leaves = new avtDataTree_p[nsets];
// hand data_sets and domain_ids to the python expression
for(int i = 0; i < nsets ; i++)
{
if(PyTuple_SetItem(py_dsets,i,pyEnv->WrapVTKObject(data_sets[i],"vtkDataSet")) != 0)
{
delete [] data_sets;
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable to add data set to execution input list");
}
if(PyTuple_SetItem(py_domids,i,PyInt_FromLong(domain_ids[i])) != 0)
{
delete [] data_sets;
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable to add domain id to execution input list");
}
}
delete [] data_sets;
// call execute on Filter
PyObject *py_filter = pyEnv->Filter()->PythonObject();
if(py_filter == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Python filter not initialized.");
// get the execute method
PyObject *py_exe= PyString_FromString("execute");
if(py_exe == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Error preparing for call of 'execute' method.");
// call with py_dsets, py_domids
PyObject *py_exe_res = PyObject_CallMethodObjArgs(py_filter,
py_exe,
py_dsets,py_domids,
NULL);
if(py_exe_res == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Python Expression 'execute' method failed");
if(PySequence_Check(py_exe_res) == 0)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Python Expression 'execute' method must return a sequence of "
"data sets & a sequence of domain_ids");
Py_DECREF(py_dsets);
Py_DECREF(py_domids);
Py_DECREF(py_exe);
// result should be a list with datasets and domain ids
PyObject *py_result_dsets = PySequence_GetItem(py_exe_res,0);
PyObject *py_result_domids = PySequence_GetItem(py_exe_res,1);
if(py_result_dsets == NULL || PySequence_Check(py_result_dsets) == 0)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Python Expression execute method must return a sequence of "
"data sets & a sequence of domain_ids");
if(py_result_domids == NULL || PySequence_Check(py_result_domids) == 0)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Python Expression execute method must return a sequence of "
"data sets & a sequence of domain_ids");
PyObject *py_r_dsets = PySequence_Fast(py_result_dsets,"Expected Sequence");
PyObject *py_r_domids = PySequence_Fast(py_result_domids,"Expected Sequence");
if(py_r_dsets == NULL || py_r_domids == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable to obtain result sequences.");
// int n_r_dsets = PySequence_Size(py_r_dsets);
// int n_r_domids = PySequence_Size(py_r_domids);
// check that the lists are the correct size?
std::vector<vtkDataSet*> res_dsets;
std::vector<int> res_domids;
// process all local sets
for(int i = 0; i < nsets ; i++)
{
// get current set
vtkDataSet *res_dset = NULL; // fetch each set from vtk output
int res_domid = -1;
PyObject *py_dset = PySequence_Fast_GET_ITEM(py_r_dsets,i); // borrowed
PyObject *py_domid = PySequence_Fast_GET_ITEM(py_r_domids,i); // borrowed
if(py_dset == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable fetch result data set.");
if(py_dset != Py_None) // allow 'None' as return
{
res_dset = (vtkDataSet*) pyEnv->UnwrapVTKObject(py_dset,"vtkDataSet");
if(res_dset == NULL)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Error unwraping vtkDataSet result.");
if(py_domid == NULL || PyInt_Check(py_domid) == 0)
PYEXPR_ERROR("avtPythonExpression::Execute Error - "
"Unable fetch result domain id.");
res_domid = (int) PyInt_AsLong(py_domid);
}
res_dsets.push_back(res_dset);
res_domids.push_back(res_domid);
}
// if we have no errors, register the datasets & create the output
// data tree
for(int i = 0; i < nsets ; i++)
{
if(res_dsets[i]) // add result as new leaf
{
res_dsets[i]->Register(NULL);
leaves[i] = new avtDataTree(res_dsets[i],res_domids[i]);
}
else // if the dataset only contained ghost zones we could end up here
leaves[i] = NULL;
}
Py_DECREF(py_result_dsets);
Py_DECREF(py_result_domids);
Py_DECREF(py_r_dsets);
Py_DECREF(py_r_domids);
Py_DECREF(py_exe_res);
// create output data tree
avtDataTree_p result_tree = new avtDataTree(nsets,leaves);
// set output data tree
SetOutputDataTree(result_tree);
// cleanup leaves array
delete [] leaves;
}
vtkDataSet *
avtDatasetOnDemandFilter::GetDomain(int domainId,
int timeStep)
{
debug5<<"avtDatasetOnDemandFilter::GetDomain("<<domainId<<", "<<timeStep<<");"<<endl;
if ( ! OperatingOnDemand() )
EXCEPTION0(ImproperUseException);
if ( domainId < 0 )
return NULL;
// See if it is already in the cache. If so, just return it.
std::list<DomainCacheEntry>::iterator it;
for ( it = domainQueue.begin(); it != domainQueue.end(); it++ )
// Found it. Move it to the front of the list.
if (it->domainID == domainId &&
it->timeStep == timeStep)
{
DomainCacheEntry entry;
entry = *it;
//Remove, then move to front.
domainQueue.erase( it );
domainQueue.push_front( entry );
return entry.ds;
}
debug5<<" Update->GetDomain "<<domainId<<" time= "<<timeStep<<endl;
avtContract_p new_contract = new avtContract(firstContract);
vector<int> domains;
domains.push_back(domainId);
new_contract->GetDataRequest()->GetRestriction()->TurnOnAll();
new_contract->GetDataRequest()->GetRestriction()->RestrictDomains(domains);
if (timeStep >= 0)
new_contract->GetDataRequest()->SetTimestep(timeStep);
new_contract->SetOnDemandStreaming(true);
GetInput()->Update(new_contract);
vtkDataSet *rv = GetInputDataTree()->GetSingleLeaf();
// Add it to the cache.
DomainCacheEntry entry;
entry.domainID = domainId;
entry.timeStep = timeStep;
entry.ds = rv;
rv->Register(NULL);
loadDSCount++;
//Update the domainLoadCount.
//Turn two ints into a long. Put timeStep in upper, domain in lower.
unsigned long long A = (((unsigned long long)timeStep)<<32);
unsigned long long B = ((unsigned long long)domainId);
unsigned long long idx = A | B;
if (domainLoadCount.find(idx) == domainLoadCount.end())
domainLoadCount[idx] = 0;
domainLoadCount[idx] ++;
domainQueue.push_front(entry);
if ( domainQueue.size() > maxQueueLength )
{
domainQueue.pop_back();
purgeDSCount++;
}
return rv;
}
void
avtActualExtentsFilter::Execute(void)
{
UpdateExtents();
SetOutputDataTree(GetInputDataTree());
}
void
avtResampleFilter::BypassResample(void)
{
SetOutputDataTree(GetInputDataTree());
}
