Ejemplo n.º 1
0
NTSTATUS
NICStartRecv(
    IN  PFDO_DATA  FdoData
    )
/*++
Routine Description:

    Start the receive unit if it's not in a ready state

    Assumption: This function is called with the Rcv SPINLOCK held.

Arguments:

    FdoData     Pointer to our FdoData

Return Value:

    NT Status code

--*/
{
    PMP_RFD         pMpRfd;
    NTSTATUS        status = STATUS_SUCCESS;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "---> NICStartRecv\n");
    ASSERT(!IsListEmpty(&FdoData->RecvList));

    //
    // Get the MP_RFD head
    //
    pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);

    NICHandleRecvInterrupt(FdoData);
    ASSERT(!IsListEmpty(&FdoData->RecvList));

    //
    // Get the new MP_RFD head
    //
    pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);

exit:
    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "<--- NICStartRecv, Status=%x\n", status);
    return status;
}
Ejemplo n.º 2
0
VOID
NICResetRecv(
    IN  PFDO_DATA   FdoData
    )
/*++
Routine Description:

    Reset the receive list

    Assumption: This function is called with the Rcv SPINLOCK held.

Arguments:

    FdoData     Pointer to our FdoData

Return Value:

     None

--*/
{
    PMP_RFD   pMpRfd;
    PHW_RFD   pHwRfd;
    ULONG     RfdCount;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "--> NICResetRecv\n");

    ASSERT(!IsListEmpty(&FdoData->RecvList));

    //
    // Get the MP_RFD head
    //
    pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);
    for (RfdCount = 0; RfdCount < FdoData->nReadyRecv; RfdCount++)
    {
        pHwRfd = pMpRfd->HwRfd;
        pHwRfd->RfdCbHeader.CbStatus = 0;

        pMpRfd = (PMP_RFD)GetListFLink(&pMpRfd->List);
    }

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "<-- NICResetRecv\n");
}
Ejemplo n.º 3
0
NTSTATUS
NICStartRecv(
    IN  PFDO_DATA  FdoData
    )
/*++
Routine Description:

    Start the receive unit if it's not in a ready state

    Assumption: This function is called with the Rcv SPINLOCK held.

Arguments:

    FdoData     Pointer to our FdoData

Return Value:

    NT Status code

--*/
{
    PMP_RFD         pMpRfd;
    NTSTATUS        status;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "---> NICStartRecv\n");

    //
    // If the receiver is ready, then don't try to restart.
    //
    if (NIC_IS_RECV_READY(FdoData))
    {
        TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "Receive unit already active\n");
        return STATUS_SUCCESS;
    }

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "Re-start receive unit...\n");
    ASSERT(!IsListEmpty(&FdoData->RecvList));

    //
    // Get the MP_RFD head
    //
    pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);

    //
    // If more packets are received, clean up RFD chain again
    //
    if (NIC_RFD_GET_STATUS(pMpRfd->HwRfd))
    {
        NICHandleRecvInterrupt(FdoData);
        ASSERT(!IsListEmpty(&FdoData->RecvList));

        //
        // Get the new MP_RFD head
        //
        pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);
    }

    //
    // Wait for the SCB to clear before we set the general pointer
    //
    if (!WaitScb(FdoData))
    {
        status = STATUS_DEVICE_DATA_ERROR;
        goto exit;
    }

    if (FdoData->DevicePowerState > PowerDeviceD0)
    {
        status = STATUS_DEVICE_DATA_ERROR;
        goto exit;
    }
    //
    // Set the SCB General Pointer to point the current Rfd
    //
    FdoData->CSRAddress->ScbGeneralPointer = pMpRfd->HwRfdPhys;

    //
    // Issue the SCB RU start command
    //
    status = D100IssueScbCommand(FdoData, SCB_RUC_START, FALSE);
    if (status == STATUS_SUCCESS)
    {
        // wait for the command to be accepted
        if (!WaitScb(FdoData))
        {
            status = STATUS_DEVICE_DATA_ERROR;
        }
    }

    exit:

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "<--- NICStartRecv, Status=%x\n", status);
    return status;
}
Ejemplo n.º 4
0
VOID
NICHandleRecvInterrupt(
    IN  PFDO_DATA  FdoData
    )
/*++
Routine Description:

    Interrupt handler for receive processing. Put the received packets
    into an array and call NICServiceReadIrps. If we run low on
    RFDs, allocate another one.

    Assumption: This function is called with the Rcv SPINLOCK held.

Arguments:

    FdoData     Pointer to our FdoData

Return Value:

    None

--*/
{
    PMP_RFD         pMpRfd = NULL;
    PHW_RFD         pHwRfd = NULL;

    PMP_RFD         PacketArray[NIC_DEF_RFDS];
    PMP_RFD         PacketFreeArray[NIC_DEF_RFDS];
    UINT            PacketArrayCount;
    UINT            PacketFreeCount;
    UINT            Index;
    UINT            LoopIndex = 0;
    UINT            LoopCount = NIC_MAX_RFDS / NIC_DEF_RFDS + 1;    // avoid staying here too long

    BOOLEAN         bContinue = TRUE;
    BOOLEAN         bAllocNewRfd = FALSE;
    USHORT          PacketStatus;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "---> NICHandleRecvInterrupt\n");

    ASSERT(FdoData->nReadyRecv >= NIC_MIN_RFDS);

    while (LoopIndex++ < LoopCount && bContinue)
    {
        PacketArrayCount = 0;
        PacketFreeCount = 0;

        //
        // Process up to the array size RFD's
        //
        while (PacketArrayCount < NIC_DEF_RFDS)
        {
            if (IsListEmpty(&FdoData->RecvList))
            {
                ASSERT(FdoData->nReadyRecv == 0);
                bContinue = FALSE;
                break;
            }

            //
            // Get the next MP_RFD to process
            //
            pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);

            //
            // Get the associated HW_RFD
            //
            pHwRfd = pMpRfd->HwRfd;

            //
            // Is this packet completed?
            //
            PacketStatus = NIC_RFD_GET_STATUS(pHwRfd);
            if (!NIC_RFD_STATUS_COMPLETED(PacketStatus))
            {
                bContinue = FALSE;
                break;
            }

            //
            // HW specific - check if actual count field has been updated
            //
            if (!NIC_RFD_VALID_ACTUALCOUNT(pHwRfd))
            {
                bContinue = FALSE;
                break;
            }


            //
            // Remove the RFD from the head of the List
            //
            RemoveEntryList((PLIST_ENTRY)pMpRfd);
            FdoData->nReadyRecv--;

            ASSERT(MP_TEST_FLAG(pMpRfd, fMP_RFD_RECV_READY));
            MP_CLEAR_FLAG(pMpRfd, fMP_RFD_RECV_READY);

            //
            // A good packet? drop it if not.
            //
            if (!NIC_RFD_STATUS_SUCCESS(PacketStatus))
            {
                TraceEvents(TRACE_LEVEL_WARNING, DBG_READ,
                            "Receive failure = %x\n", PacketStatus);
                NICReturnRFD(FdoData, pMpRfd);
                continue;
            }

            //
            // Do not receive any packets until a filter has been set
            //
            if (!FdoData->PacketFilter)
            {
                NICReturnRFD(FdoData, pMpRfd);
                continue;
            }

            //
            // Do not receive any packets until we are at D0
            //
            if (FdoData->DevicePowerState != PowerDeviceD0)
            {
                NICReturnRFD(FdoData, pMpRfd);
                continue;
            }

            pMpRfd->PacketSize = NIC_RFD_GET_PACKET_SIZE(pHwRfd);

            KeFlushIoBuffers(pMpRfd->Mdl, TRUE, TRUE);

            //
            // set the status on the packet, either resources or success
            //
            if (FdoData->nReadyRecv >= MIN_NUM_RFD)
            {
                MP_SET_FLAG(pMpRfd, fMP_RFD_RECV_PEND);

            }
            else
            {
                MP_SET_FLAG(pMpRfd, fMP_RFD_RESOURCES);

                _Analysis_assume_(PacketFreeCount <= PacketArrayCount);
                PacketFreeArray[PacketFreeCount] = pMpRfd;
                PacketFreeCount++;

                //
                // Reset the RFD shrink count - don't attempt to shrink RFD
                //
                FdoData->RfdShrinkCount = 0;

                //
                // Remember to allocate a new RFD later
                //
                bAllocNewRfd = TRUE;
            }

            PacketArray[PacketArrayCount] = pMpRfd;
            PacketArrayCount++;
        }

        //
        // if we didn't process any receives, just return from here
        //
        if (PacketArrayCount == 0)
        {
            break;
        }


        WdfSpinLockRelease(FdoData->RcvLock);

        WdfSpinLockAcquire(FdoData->Lock);
        //
        // if we have a Recv interrupt and have reported a media disconnect status
        // time to indicate the new status
        //

        if (Disconnected == FdoData->MediaState)
        {
            TraceEvents(TRACE_LEVEL_WARNING, DBG_READ, "Media state changed to Connected\n");

            MP_CLEAR_FLAG(FdoData, fMP_ADAPTER_NO_CABLE);

            FdoData->MediaState = Connected;


            WdfSpinLockRelease(FdoData->Lock);
            //
            // Indicate the media event
            //
            NICServiceIndicateStatusIrp(FdoData);
        }

        else
        {

            WdfSpinLockRelease(FdoData->Lock);
        }


        NICServiceReadIrps(
            FdoData,
            PacketArray,
            PacketArrayCount);


        WdfSpinLockAcquire(FdoData->RcvLock);

        //
        // Return all the RFDs to the pool.
        //
        for (Index = 0; Index < PacketFreeCount; Index++)
        {

            //
            // Get the MP_RFD saved in this packet, in NICAllocRfd
            //
            pMpRfd = PacketFreeArray[Index];

            ASSERT(MP_TEST_FLAG(pMpRfd, fMP_RFD_RESOURCES));
            MP_CLEAR_FLAG(pMpRfd, fMP_RFD_RESOURCES);

            NICReturnRFD(FdoData, pMpRfd);
        }

    }

    //
    // If we ran low on RFD's, we need to allocate a new RFD
    //
    if (bAllocNewRfd)
    {
        //
        // Allocate one more RFD only if it doesn't exceed the max RFD limit
        //
        if (FdoData->CurrNumRfd < FdoData->MaxNumRfd
                    && !FdoData->AllocNewRfd)
        {
            NTSTATUS status;

            FdoData->AllocNewRfd = TRUE;

            //
            // Since we are running at DISPATCH_LEVEL, we will queue a workitem
            // to allocate RFD memory at PASSIVE_LEVEL. Note that
            // AllocateCommonBuffer and FreeCommonBuffer can be called only at
            // PASSIVE_LEVEL.
            //
            status = PciDrvQueuePassiveLevelCallback(FdoData,
                                        NICAllocRfdWorkItem,
                                        NULL, NULL);
            if(!NT_SUCCESS(status)){
                FdoData->AllocNewRfd = FALSE;
            }
        }
    }

    ASSERT(FdoData->nReadyRecv >= NIC_MIN_RFDS);

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "<--- NICHandleRecvInterrupt\n");
}
Ejemplo n.º 5
0
VOID
NICHandleRecvInterrupt(
    IN  PFDO_DATA  FdoData
    )
/*++
Routine Description:

    Interrupt handler for receive processing. Put the received packets
    into an array and call NICServiceReadIrps. If we run low on
    RFDs, allocate another one.

    Assumption: This function is called with the Rcv SPINLOCK held.

Arguments:

    FdoData     Pointer to our FdoData

Return Value:

    None

--*/
{
    PMP_RFD         pMpRfd = NULL;
    PULONG          pHwRfd = NULL;

    PMP_RFD         PacketArray[NIC_DEF_RFDS];
    PMP_RFD         PacketFreeArray[NIC_DEF_RFDS];
    UINT            PacketArrayCount;
    UINT            PacketFreeCount;
    UINT            Index;
    UINT            LoopIndex = 0;
    UINT            LoopCount = NIC_MAX_RFDS / NIC_DEF_RFDS + 1;    // avoid staying here too long

    BOOLEAN         bContinue = TRUE;
    BOOLEAN         bAllocNewRfd = FALSE;

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "---> NICHandleRecvInterrupt\n");

    ASSERT(FdoData->nReadyRecv >= NIC_MIN_RFDS);

    while (LoopIndex++ < LoopCount && bContinue)
    {
        PacketArrayCount = 0;
        PacketFreeCount = 0;

        //
        // Process up to the array size RFD's
        //
        while (PacketArrayCount < NIC_DEF_RFDS)
        {
            if (IsListEmpty(&FdoData->RecvList))
            {
                ASSERT(FdoData->nReadyRecv == 0);
                bContinue = FALSE;
                break;
            }

            //
            // Get the next MP_RFD to process
            //
            pMpRfd = (PMP_RFD)GetListHeadEntry(&FdoData->RecvList);

            //
            // Get the associated HW_RFD
            //
            pHwRfd = pMpRfd->HwRfd;

            //
            // Remove the RFD from the head of the List
            //
            RemoveEntryList((PLIST_ENTRY)pMpRfd);
            FdoData->nReadyRecv--;

            ASSERT(MP_TEST_FLAG(pMpRfd, fMP_RFD_RECV_READY));
            MP_CLEAR_FLAG(pMpRfd, fMP_RFD_RECV_READY);

            pMpRfd->PacketSize = 4;

            KeFlushIoBuffers(pMpRfd->Mdl, TRUE, TRUE);

            MP_SET_FLAG(pMpRfd, fMP_RFD_RECV_PEND);

            PacketArray[PacketArrayCount] = pMpRfd;
            PacketArrayCount++;
        }

        //
        // if we didn't process any receives, just return from here
        //
        if (PacketArrayCount == 0)
        {
            break;
        }


        WdfSpinLockRelease(FdoData->RcvLock);

        NICServiceReadIrps(
            FdoData,
            PacketArray,
            PacketArrayCount);


        WdfSpinLockAcquire(FdoData->RcvLock);

        //
        // Return all the RFDs to the pool.
        //
        for (Index = 0; Index < PacketFreeCount; Index++)
        {

            //
            // Get the MP_RFD saved in this packet, in NICAllocRfd
            //
            pMpRfd = PacketFreeArray[Index];

            ASSERT(MP_TEST_FLAG(pMpRfd, fMP_RFD_RESOURCES));
            MP_CLEAR_FLAG(pMpRfd, fMP_RFD_RESOURCES);

            NICReturnRFD(FdoData, pMpRfd);
        }

    }

    ASSERT(FdoData->nReadyRecv >= NIC_MIN_RFDS);

    TraceEvents(TRACE_LEVEL_VERBOSE, DBG_READ, "<--- NICHandleRecvInterrupt\n");
}