void PWR_Lcd_Tft_16Bit_240320_On(void)
{
int i,j,k;
Lcd_Port_Init();
//Lcd_Lpc3600Enable(); // Enable LPC3600
Lcd_Init(MODE_TFT_16BIT_240320);
Glib_Init(MODE_TFT_16BIT_240320);
Lcd_EnvidOnOff(1);
Glib_ClearScr(0, MODE_TFT_16BIT_240320);
Glib_Rectangle(0,0,239,319,0x07e0);
Glib_FilledRectangle(0,0,20,20,65535);
Glib_Rectangle(220,300,239,319,65535);
Glib_Line(0,0,239,319,0x1f);
Glib_Line(239,0,0,319,0xf800);
Uart_Printf("TFT 64K color mode test 2!\n");
}
void Set_Lcd_Tft_16Bit_240320_Dvs(void)
{
// int i,j;//,k;
Uart_Printf("[Set LCD]\n");
Lcd_Port_Init();
Lcd_Init(MODE_TFT_16BIT_240320);
Glib_Init(MODE_TFT_16BIT_240320);
Lcd_Lcc3600Enable(); // Enable LCC3600
Lcd_PowerEnable(0, 1);
Lcd_EnvidOnOff(1);
Glib_ClearScr(0, MODE_TFT_16BIT_240320);
Glib_FilledRectangle(0,0,119,159,0xf800);
Glib_FilledRectangle(120,0,239,159,0x07e0);
Glib_FilledRectangle(0,160,119,320,0x001f);
Glib_FilledRectangle(120,160,239,320,0xffff);
Glib_FilledRectangle(100,100,150,200,0x5555);
rLCDCON1 &= ~(0x1); // ENVID off.
rLCDCON1 = (rLCDCON1 & ~(0x3ff<<8)) | (9<<8) | 1; // ENVID on. 5MHz 60fps
// ON PWREN signal
rLCDCON5 = (rLCDCON5 & ~(1<<3)) ; // PWREN disable
rGPGCON = (rGPGCON & ~(0x3<<8)) | 0x1<<8; // GPG4, PWR_EN -> Output.
rGPGDAT&=(~(1<<4)); // GPG4=Low
Delay(50); // GPG4=Low
rGPGDAT|=(1<<4); //GPG4=High
//--------LCD frame interrupt setting ------------------------------------START
pISR_LCD=(unsigned)Lcd_Int_Frame_ForDvs;
rINTMSK &= ~(BIT_LCD);
rLCDINTMSK=(1<<2)|(0<<1)|(1); // 8Words Trigger Level,Unmask Frame int,mask Fifo int
//--------LCD frame interrupt setting ------------------------------------END
}
