void AbstractHdf5Access::SetMainDatasetRawChunkCache()
{
// 128 M cache for raw data. 12799 is a prime number which is 100 x larger
// than the number of 1 MB chunks (the largest we have tested with) which
// could fit into the 128 M cache. 0.75 for the last argument is the default.
// See: http://www.hdfgroup.org/HDF5/doc/RM/RM_H5P.html#Property-SetChunkCache
hsize_t max_objects_in_chunk_cache = 12799u;
hsize_t max_bytes_in_cache = 128u*1024u*1024u;
#if H5_VERS_MAJOR>=1 && H5_VERS_MINOR>=8 && H5_VERS_RELEASE>=3 // HDF5 1.8.3+
// These methods set the cache on a dataset basis
hid_t dapl_id = H5Dget_access_plist( mVariablesDatasetId );
H5Pset_chunk_cache( dapl_id,
max_objects_in_chunk_cache ,
max_bytes_in_cache ,
H5D_CHUNK_CACHE_W0_DEFAULT);
#else
// These older methods set the cache on a file basis
hid_t fapl_id = H5Fget_access_plist( mFileId );
H5Pset_cache( fapl_id,
0, // unused
max_objects_in_chunk_cache,
max_bytes_in_cache,
0.75); // default value
#endif
}
/*-------------------------------------------------------------------------
* Function: test_sec2
*
* Purpose: Tests the file handle interface for SEC2 driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Raymond Lu
* Tuesday, Sept 24, 2002
*
* Modifications:
*
* Raymond Lu
* Wednesday, June 23, 2004
* Added test for H5Fget_filesize.
*
*-------------------------------------------------------------------------
*/
static herr_t
test_sec2(void)
{
hid_t file=(-1), fapl, access_fapl = -1;
char filename[1024];
int *fhandle=NULL;
hsize_t file_size;
TESTING("SEC2 file driver");
/* Set property list and file name for SEC2 driver. */
fapl = h5_fileaccess();
if(H5Pset_fapl_sec2(fapl) < 0)
TEST_ERROR;
h5_fixname(FILENAME[0], fapl, filename, sizeof filename);
if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if ((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* ...and close the property list */
if (H5Pclose(access_fapl) < 0)
TEST_ERROR;
/* Check file handle API */
if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle<0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no garantee the size of metadata in file is constant.
* Just try to check if it's reasonable. It's 2KB right now.
*/
if(file_size<1*KB || file_size>4*KB)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose (fapl);
H5Fclose(file);
} H5E_END_TRY;
return -1;
}
static VALUE
rb_H5Fget_access_plist (VALUE mod, VALUE v_file_id)
{
hid_t plist_id;
plist_id = H5Fget_access_plist(NUM2INT(v_file_id));
if ( plist_id < 0 )
rb_hdf5_raise("can't get access plist");
return INT2NUM(plist_id);
}
/*----------------------------------------------------------------------------
* Name: h5fget_access_plist_c
* Purpose: Call H5Fget_access_plist to get the file access property list
* Inputs: file_id - file identifier
* Outputs: access_id - access property list identifier
* Returns: 0 on success, -1 on failure
* Programmer: Elena Pourmal
* Monday, September 30, 2002
* Modifications:
*---------------------------------------------------------------------------*/
int_f
nh5fget_access_plist_c (hid_t_f *file_id, hid_t_f *access_id)
{
int ret_value = -1;
hid_t c_file_id, c_access_id;
c_file_id = (hid_t)*file_id;
c_access_id = H5Fget_access_plist(c_file_id);
if (c_access_id < 0) return ret_value;
*access_id = (hid_t_f)c_access_id;
ret_value = 0;
return ret_value;
}
/*-------------------------------------------------------------------------
* Function: test_multi
*
* Purpose: Tests the file handle interface for MUTLI driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Raymond Lu
* Tuesday, Sept 24, 2002
*
* Modifications:
*
* Raymond Lu
* Wednesday, June 23, 2004
* Added test for H5Fget_filesize.
*
*-------------------------------------------------------------------------
*/
static herr_t
test_multi(void)
{
hid_t file=(-1), fapl, fapl2=(-1), dset=(-1), space=(-1);
hid_t root, attr, aspace, atype;
hid_t access_fapl = -1;
char filename[1024];
int *fhandle2=NULL, *fhandle=NULL;
hsize_t file_size;
H5FD_mem_t mt, memb_map[H5FD_MEM_NTYPES];
hid_t memb_fapl[H5FD_MEM_NTYPES];
haddr_t memb_addr[H5FD_MEM_NTYPES];
const char *memb_name[H5FD_MEM_NTYPES];
char sv[H5FD_MEM_NTYPES][32];
hsize_t dims[2]={MULTI_SIZE, MULTI_SIZE};
hsize_t adims[1]={1};
char dname[]="dataset";
char meta[] = "this is some metadata on this file";
int i, j;
int buf[MULTI_SIZE][MULTI_SIZE];
TESTING("MULTI file driver");
/* Set file access property list for MULTI driver */
fapl = h5_fileaccess();
HDmemset(memb_map, 0, sizeof memb_map);
HDmemset(memb_fapl, 0, sizeof memb_fapl);
HDmemset(memb_name, 0, sizeof memb_name);
HDmemset(memb_addr, 0, sizeof memb_addr);
HDmemset(sv, 0, sizeof sv);
for(mt=H5FD_MEM_DEFAULT; mt<H5FD_MEM_NTYPES; H5_INC_ENUM(H5FD_mem_t,mt)) {
memb_fapl[mt] = H5P_DEFAULT;
memb_map[mt] = H5FD_MEM_SUPER;
}
memb_map[H5FD_MEM_DRAW] = H5FD_MEM_DRAW;
memb_map[H5FD_MEM_BTREE] = H5FD_MEM_BTREE;
memb_map[H5FD_MEM_GHEAP] = H5FD_MEM_GHEAP;
sprintf(sv[H5FD_MEM_SUPER], "%%s-%c.h5", 's');
memb_name[H5FD_MEM_SUPER] = sv[H5FD_MEM_SUPER];
memb_addr[H5FD_MEM_SUPER] = 0;
sprintf(sv[H5FD_MEM_BTREE], "%%s-%c.h5", 'b');
memb_name[H5FD_MEM_BTREE] = sv[H5FD_MEM_BTREE];
memb_addr[H5FD_MEM_BTREE] = HADDR_MAX/4;
sprintf(sv[H5FD_MEM_DRAW], "%%s-%c.h5", 'r');
memb_name[H5FD_MEM_DRAW] = sv[H5FD_MEM_DRAW];
memb_addr[H5FD_MEM_DRAW] = HADDR_MAX/2;
sprintf(sv[H5FD_MEM_GHEAP], "%%s-%c.h5", 'g');
memb_name[H5FD_MEM_GHEAP] = sv[H5FD_MEM_GHEAP];
memb_addr[H5FD_MEM_GHEAP] = HADDR_MAX*3/4;
if(H5Pset_fapl_multi(fapl, memb_map, memb_fapl, memb_name, memb_addr, TRUE) < 0)
TEST_ERROR;
h5_fixname(FILENAME[4], fapl, filename, sizeof filename);
if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
/* Test wrong ways to reopen multi files */
if(test_multi_opens(filename) < 0)
TEST_ERROR;
/* Reopen the file */
if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
TEST_ERROR;
/* Create and write data set */
if((space=H5Screate_simple(2, dims, NULL)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if ((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* ...and close the property list */
if (H5Pclose(access_fapl) < 0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* Before any data is written, the raw data file is empty. So
* the file size is only the size of b-tree + HADDR_MAX/4.
*/
if(file_size < HADDR_MAX/4 || file_size > HADDR_MAX/2)
TEST_ERROR;
if((dset=H5Dcreate2(file, dname, H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
for(i=0; i<MULTI_SIZE; i++)
for(j=0; j<MULTI_SIZE; j++)
buf[i][j] = i*10000+j;
if(H5Dwrite(dset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0)
TEST_ERROR;
if((fapl2=H5Pcreate(H5P_FILE_ACCESS)) < 0)
TEST_ERROR;
if(H5Pset_multi_type(fapl2, H5FD_MEM_SUPER) < 0)
TEST_ERROR;
if(H5Fget_vfd_handle(file, fapl2, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle<0)
TEST_ERROR;
if(H5Pset_multi_type(fapl2, H5FD_MEM_DRAW) < 0)
TEST_ERROR;
if(H5Fget_vfd_handle(file, fapl2, (void **)&fhandle2) < 0)
TEST_ERROR;
if(*fhandle2<0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* After the data is written, the file size is huge because the
* beginning of raw data file is set at HADDR_MAX/2. It's supposed
* to be (HADDR_MAX/2 + 128*128*4)
*/
if(file_size < HADDR_MAX/2 || file_size > HADDR_MAX)
TEST_ERROR;
if(H5Sclose(space) < 0)
TEST_ERROR;
if(H5Dclose(dset) < 0)
TEST_ERROR;
if(H5Pclose(fapl2) < 0)
TEST_ERROR;
/* Create and write attribute for the root group. */
if((root = H5Gopen2(file, "/", H5P_DEFAULT)) < 0)
FAIL_STACK_ERROR
/* Attribute string. */
if((atype = H5Tcopy(H5T_C_S1)) < 0)
TEST_ERROR;
if(H5Tset_size(atype, strlen(meta) + 1) < 0)
TEST_ERROR;
if(H5Tset_strpad(atype, H5T_STR_NULLTERM) < 0)
TEST_ERROR;
/* Create and write attribute */
if((aspace = H5Screate_simple(1, adims, NULL)) < 0)
TEST_ERROR;
if((attr = H5Acreate2(root, "Metadata", atype, aspace, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
if(H5Awrite(attr, atype, meta) < 0)
TEST_ERROR;
/* Close IDs */
if(H5Tclose(atype) < 0)
TEST_ERROR;
if(H5Sclose(aspace) < 0)
TEST_ERROR;
if(H5Aclose(attr) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Sclose(space);
H5Dclose(dset);
H5Pclose(fapl);
H5Pclose(fapl2);
H5Fclose(file);
} H5E_END_TRY;
return -1;
}
/*-------------------------------------------------------------------------
* Function: test_family
*
* Purpose: Tests the file handle interface for FAMILY driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Raymond Lu
* Tuesday, Sept 24, 2002
*
* Modifications:
*
* Raymond Lu
* Wednesday, June 23, 2004
* Added test for H5Fget_filesize.
*
* Raymond Lu
* June 2, 2005
* Added a function test_family_opens() to test different
* wrong way to reopen family files.
*
*-------------------------------------------------------------------------
*/
static herr_t
test_family(void)
{
hid_t file=(-1), fapl, fapl2=(-1), space=(-1), dset=(-1);
hid_t access_fapl = -1;
char filename[1024];
char dname[]="dataset";
unsigned int i, j;
int *fhandle=NULL, *fhandle2=NULL;
int buf[FAMILY_NUMBER][FAMILY_SIZE];
hsize_t dims[2]={FAMILY_NUMBER, FAMILY_SIZE};
hsize_t file_size;
TESTING("FAMILY file driver");
/* Set property list and file name for FAMILY driver */
fapl = h5_fileaccess();
if(H5Pset_fapl_family(fapl, (hsize_t)FAMILY_SIZE, H5P_DEFAULT) < 0)
TEST_ERROR;
h5_fixname(FILENAME[2], fapl, filename, sizeof filename);
if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
/* Test different wrong ways to reopen family files where there's only
* one member file existing. */
if(test_family_opens(filename, fapl) < 0)
TEST_ERROR;
/* Reopen the file with default member file size */
if(H5Pset_fapl_family(fapl, (hsize_t)H5F_FAMILY_DEFAULT, H5P_DEFAULT) < 0)
TEST_ERROR;
if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* The file size is supposed to be about 800 bytes right now. */
if(file_size < (KB / 2) || file_size > KB)
TEST_ERROR;
/* Create and write dataset */
if((space=H5Screate_simple(2, dims, NULL)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if ((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* ...and close the property list */
if (H5Pclose(access_fapl) < 0)
TEST_ERROR;
if((dset=H5Dcreate2(file, dname, H5T_NATIVE_INT, space, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
for(i=0; i<FAMILY_NUMBER; i++)
for(j=0; j<FAMILY_SIZE; j++)
buf[i][j] = i*10000+j;
if(H5Dwrite(dset, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, buf) < 0)
TEST_ERROR;
/* check file handle API */
if((fapl2=H5Pcreate(H5P_FILE_ACCESS)) < 0)
TEST_ERROR;
if(H5Pset_family_offset(fapl2, (hsize_t)0) < 0)
TEST_ERROR;
if(H5Fget_vfd_handle(file, fapl2, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle<0)
TEST_ERROR;
if(H5Pset_family_offset(fapl2, (hsize_t)(FAMILY_SIZE*2)) < 0)
TEST_ERROR;
if(H5Fget_vfd_handle(file, fapl2, (void **)&fhandle2) < 0)
TEST_ERROR;
if(*fhandle2<0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* Some data has been written. The file size should be bigger(18KB+976
* bytes if int size is 4 bytes) now. */
if(sizeof(int)<=4) {
if(file_size<18*KB || file_size>20*KB)
TEST_ERROR;
} else if(sizeof(int)>=8) {
if(file_size<32*KB || file_size>40*KB)
TEST_ERROR;
}
if(H5Sclose(space) < 0)
TEST_ERROR;
if(H5Dclose(dset) < 0)
TEST_ERROR;
if(H5Pclose(fapl2) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
/* Test different wrong ways to reopen family files when there're multiple
* member files existing. */
if(test_family_opens(filename, fapl) < 0)
TEST_ERROR;
/* Reopen the file with correct member file size. */
if(H5Pset_fapl_family(fapl, (hsize_t)FAMILY_SIZE, H5P_DEFAULT) < 0)
TEST_ERROR;
if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Sclose(space);
H5Dclose(dset);
H5Pclose (fapl2);
H5Fclose(file);
} H5E_END_TRY;
return -1;
}
/*-------------------------------------------------------------------------
* Function: test_core
*
* Purpose: Tests the file handle interface for CORE driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Raymond Lu
* Tuesday, Sept 24, 2002
*
* Modifications:
*
* Raymond Lu
* Wednesday, June 23, 2004
* Added test for H5Fget_filesize.
*
* Raymond Lu, 2006-11-30
* Enabled the driver to read an existing file depending on
* the setting of the backing_store and file open flags.
*-------------------------------------------------------------------------
*/
static herr_t
test_core(void)
{
hid_t file=(-1), fapl, access_fapl = -1;
char filename[1024];
void *fhandle=NULL;
hsize_t file_size;
int *points, *check, *p1, *p2;
hid_t dset1=-1, space1=-1;
hsize_t dims1[2];
int i, j, n;
TESTING("CORE file driver");
/* Set property list and file name for CORE driver */
fapl = h5_fileaccess();
if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
TEST_ERROR;
h5_fixname(FILENAME[1], fapl, filename, sizeof filename);
if((file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if ((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* ...and close the property list */
if (H5Pclose(access_fapl) < 0)
TEST_ERROR;
if(H5Fget_vfd_handle(file, H5P_DEFAULT, &fhandle) < 0)
TEST_ERROR;
if(fhandle==NULL)
{
printf("fhandle==NULL\n");
TEST_ERROR;
}
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no garantee the size of metadata in file is constant.
* Just try to check if it's reasonable. Why is this 4KB?
*/
if(file_size<2*KB || file_size>6*KB)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
/* Open the file with backing store off for read and write.
* Changes won't be saved in file. */
if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, FALSE) < 0)
TEST_ERROR;
if((file=H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
TEST_ERROR;
/* Allocate memory for data set. */
points=(int*)malloc(DSET1_DIM1*DSET1_DIM2*sizeof(int));
check=(int*)malloc(DSET1_DIM1*DSET1_DIM2*sizeof(int));
/* Initialize the dset1 */
p1 = points;
for(i = n = 0; i < DSET1_DIM1; i++)
for(j = 0; j < DSET1_DIM2; j++)
*p1++ = n++;
/* Create the data space1 */
dims1[0] = DSET1_DIM1;
dims1[1] = DSET1_DIM2;
if((space1 = H5Screate_simple(2, dims1, NULL)) < 0)
TEST_ERROR;
/* Create the dset1 */
if((dset1 = H5Dcreate2(file, DSET1_NAME, H5T_NATIVE_INT, space1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Write the data to the dset1 */
if(H5Dwrite(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
TEST_ERROR;
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if((dset1 = H5Dopen2(file, DSET1_NAME, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Read the data back from dset1 */
if(H5Dread(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0)
TEST_ERROR;
/* Check that the values read are the same as the values written */
p1 = points;
p2 = check;
for(i = 0; i < DSET1_DIM1; i++)
for(j = 0; j < DSET1_DIM2; j++)
if(*p1++ != *p2++) {
H5_FAILED();
printf(" Read different values than written in data set 1.\n");
printf(" At index %d,%d\n", i, j);
TEST_ERROR;
} /* end if */
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
/* Open the file with backing store on for read and write.
* Changes will be saved in file. */
if(H5Pset_fapl_core(fapl, (size_t)CORE_INCREMENT, TRUE) < 0)
TEST_ERROR;
if((file = H5Fopen(filename, H5F_ACC_RDWR, fapl)) < 0)
TEST_ERROR;
/* Create the dset1 */
if((dset1 = H5Dcreate2(file, DSET1_NAME, H5T_NATIVE_INT, space1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Write the data to the dset1 */
if(H5Dwrite(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
TEST_ERROR;
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if((dset1 = H5Dopen2(file, DSET1_NAME, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Reallocate memory for reading buffer. */
if(check)
free(check);
check = (int*)malloc(DSET1_DIM1 * DSET1_DIM2 * sizeof(int));
/* Read the data back from dset1 */
if(H5Dread(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0)
TEST_ERROR;
/* Check that the values read are the same as the values written */
p1 = points;
p2 = check;
for(i = 0; i < DSET1_DIM1; i++)
for(j = 0; j < DSET1_DIM2; j++)
if(*p1++ != *p2++) {
H5_FAILED();
printf(" Read different values than written in data set 1.\n");
printf(" At index %d,%d\n", i, j);
TEST_ERROR;
} /* end if */
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no garantee the size of metadata in file is constant.
* Just try to check if it's reasonable. */
if(file_size<64*KB || file_size>256*KB)
TEST_ERROR;
if(H5Sclose(space1) < 0)
TEST_ERROR;
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
if(points)
free(points);
if(check)
free(check);
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose (fapl);
H5Fclose(file);
} H5E_END_TRY;
return -1;
}
/*-------------------------------------------------------------------------
* Function: test_direct
*
* Purpose: Tests the file handle interface for DIRECT I/O driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Raymond Lu
* Wednesday, 20 September 2006
*
*-------------------------------------------------------------------------
*/
static herr_t
test_direct(void)
{
#ifdef H5_HAVE_DIRECT
hid_t file=(-1), fapl, access_fapl = -1;
hid_t dset1=-1, dset2=-1, space1=-1, space2=-1;
char filename[1024];
int *fhandle=NULL;
hsize_t file_size;
hsize_t dims1[2], dims2[1];
size_t mbound;
size_t fbsize;
size_t cbsize;
int *points, *check, *p1, *p2;
int wdata2[DSET2_DIM] = {11,12,13,14};
int rdata2[DSET2_DIM];
int i, j, n;
#endif /*H5_HAVE_DIRECT*/
TESTING("Direct I/O file driver");
#ifndef H5_HAVE_DIRECT
SKIPPED();
return 0;
#else /*H5_HAVE_DIRECT*/
/* Set property list and file name for Direct driver. Set memory alignment boundary
* and file block size to 512 which is the minimum for Linux 2.6. */
fapl = h5_fileaccess();
if(H5Pset_fapl_direct(fapl, MBOUNDARY, FBSIZE, CBSIZE) < 0)
TEST_ERROR;
h5_fixname(FILENAME[5], fapl, filename, sizeof filename);
/* Verify the file access properties */
if(H5Pget_fapl_direct(fapl, &mbound, &fbsize, &cbsize) < 0)
TEST_ERROR;
if(mbound != MBOUNDARY || fbsize != FBSIZE || cbsize != CBSIZE)
TEST_ERROR;
if(H5Pset_alignment(fapl, (hsize_t)THRESHOLD, (hsize_t)FBSIZE) < 0)
TEST_ERROR;
H5E_BEGIN_TRY {
file=H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl);
} H5E_END_TRY;
if(file<0) {
H5Pclose (fapl);
SKIPPED();
printf(" Probably the file system doesn't support Direct I/O\n");
return 0;
}
/* Retrieve the access property list... */
if ((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* ...and close the property list */
if (H5Pclose(access_fapl) < 0)
TEST_ERROR;
/* Check file handle API */
if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle<0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no guarantee of the number of metadata allocations, but it's
* 4 currently and the size of the file should be between 3 & 4 file buffer
* sizes..
*/
if(file_size < (FBSIZE * 3) || file_size >= (FBSIZE * 4))
TEST_ERROR;
/* Allocate aligned memory for data set 1. For data set 1, everything is aligned including
* memory address, size of data, and file address. */
if(posix_memalign(&points, (size_t)FBSIZE, (size_t)(DSET1_DIM1*DSET1_DIM2*sizeof(int)))!=0)
TEST_ERROR;
if(posix_memalign(&check, (size_t)FBSIZE, (size_t)(DSET1_DIM1*DSET1_DIM2*sizeof(int)))!=0)
TEST_ERROR;
/* Initialize the dset1 */
p1 = points;
for(i = n = 0; i < DSET1_DIM1; i++)
for(j = 0; j < DSET1_DIM2; j++)
*p1++ = n++;
/* Create the data space1 */
dims1[0] = DSET1_DIM1;
dims1[1] = DSET1_DIM2;
if((space1 = H5Screate_simple(2, dims1, NULL)) < 0)
TEST_ERROR;
/* Create the dset1 */
if((dset1 = H5Dcreate2(file, DSET1_NAME, H5T_NATIVE_INT, space1, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Write the data to the dset1 */
if(H5Dwrite(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, points) < 0)
TEST_ERROR;
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if((dset1 = H5Dopen2(file, DSET1_NAME, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Read the data back from dset1 */
if(H5Dread(dset1, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, check) < 0)
TEST_ERROR;
/* Check that the values read are the same as the values written */
p1 = points;
p2 = check;
for(i = 0; i < DSET1_DIM1; i++)
for(j = 0; j < DSET1_DIM2; j++)
if(*p1++ != *p2++) {
H5_FAILED();
printf(" Read different values than written in data set 1.\n");
printf(" At index %d,%d\n", i, j);
TEST_ERROR;
} /* end if */
/* Create the data space2. For data set 2, memory address and data size are not aligned. */
dims2[0] = DSET2_DIM;
if((space2 = H5Screate_simple(1, dims2, NULL)) < 0)
TEST_ERROR;
/* Create the dset2 */
if((dset2 = H5Dcreate2(file, DSET2_NAME, H5T_NATIVE_INT, space2, H5P_DEFAULT, H5P_DEFAULT, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Write the data to the dset1 */
if(H5Dwrite(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, wdata2) < 0)
TEST_ERROR;
if(H5Dclose(dset2) < 0)
TEST_ERROR;
if((dset2 = H5Dopen2(file, DSET2_NAME, H5P_DEFAULT)) < 0)
TEST_ERROR;
/* Read the data back from dset1 */
if(H5Dread(dset2, H5T_NATIVE_INT, H5S_ALL, H5S_ALL, H5P_DEFAULT, rdata2) < 0)
TEST_ERROR;
/* Check that the values read are the same as the values written */
for(i = 0; i < DSET2_DIM; i++)
if(wdata2[i] != rdata2[i]) {
H5_FAILED();
printf(" Read different values than written in data set 2.\n");
printf(" At index %d\n", i);
TEST_ERROR;
} /* end if */
if(H5Sclose(space1) < 0)
TEST_ERROR;
if(H5Dclose(dset1) < 0)
TEST_ERROR;
if(H5Sclose(space2) < 0)
TEST_ERROR;
if(H5Dclose(dset2) < 0)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
if(points)
free(points);
if(check)
free(check);
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose (fapl);
H5Sclose(space1);
H5Dclose(dset1);
H5Sclose(space2);
H5Dclose(dset2);
H5Fclose(file);
} H5E_END_TRY;
return -1;
#endif /*H5_HAVE_DIRECT*/
}
int
datMap(HDSLoc *locator, const char *type_str, const char *mode_str, int ndim,
const hdsdim dims[], void **pntr, int *status) {
int isprim = 0;
char normtypestr[DAT__SZTYP+1];
size_t nbytes = 0;
hid_t h5type = 0;
int isreg = 0;
void *regpntr = NULL;
void *mapped = NULL;
hdsmode_t accmode = HDSMODE_UNKNOWN;
haddr_t offset;
hdsbool_t try_mmap = HDS_FALSE;
unsigned intent = 0;
size_t actbytes = 0;
if (*status != SAI__OK) return *status;
/* First have to validate the access mode */
switch (mode_str[0]) {
case 'R':
case 'r':
accmode = HDSMODE_READ;
break;
case 'U':
case 'u':
accmode = HDSMODE_UPDATE;
break;
case 'W':
case 'w':
accmode = HDSMODE_WRITE;
break;
default:
*status = DAT__MODIN;
emsRepf("datMap_6", "Unrecognized mode string '%s' for datMap",
status, mode_str);
goto CLEANUP;
}
/* Validate input locator. */
dat1ValidateLocator( "datMap", 1, locator, (accmode & HDSMODE_READ), status );
/* Get the HDF5 type code and confirm this is a primitive type */
isprim = dau1CheckType( 1, type_str, &h5type, normtypestr,
sizeof(normtypestr), status );
if (!isprim) {
if (*status == SAI__OK) {
*status = DAT__TYPIN;
emsRepf("datMap_1", "datGet: Data type must be a primitive type and not '%s'",
status, normtypestr);
}
goto CLEANUP;
}
/* Not allowed to map undefined data in READ or UPDATE mode */
if (accmode == HDSMODE_UPDATE || accmode == HDSMODE_READ) {
hdsbool_t defined;
if (*status == SAI__OK) {
datState( locator, &defined, status );
if (!defined) {
*status = DAT__UNSET;
emsRepf("datMap_6bb", "Can not map an undefined primitive in mode '%s'",
status, mode_str);
goto CLEANUP;
}
}
}
/* How did we open this file? */
CALLHDFQ( H5Fget_intent( locator->file_id, &intent ));
if (accmode == HDSMODE_UPDATE || accmode == HDSMODE_WRITE) {
/* Must check whether the file was opened for write */
if ( intent == H5F_ACC_RDONLY ) {
*status = DAT__ACCON;
emsRepf("datMap_6b", "datMap: Can not map readonly locator in mode '%s'",
status, mode_str);
goto CLEANUP;
}
}
/* Verify that the specified dimensions match the locator dimensions */
if (*status == SAI__OK) {
hdsdim locdims[DAT__MXDIM];
int locndims;
int i;
datShape(locator, DAT__MXDIM, locdims, &locndims, status );
/* Note that if we are mapping as a scalar the locator should
refer to a single element */
if (ndim == 0) {
size_t nelem = 1;
for (i=0; i<locndims; i++) {
nelem *= locdims[i];
}
if (nelem != 1) {
*status = DAT__DIMIN;
emsRepf("datMap_6e", "datMap: Attempt to map as a scalar but locator"
" refers to a primitive with %zu elements",
status, nelem);
goto CLEANUP;
}
} else {
if (ndim != locndims) {
*status = DAT__DIMIN;
emsRepf("datMap_6c", "datMap: Dimensionality mismatch --"
" requested number: %d locator number: %d", status,
ndim, locndims );
goto CLEANUP;
}
for (i=0; i<ndim; i++) {
if ( locdims[i] != dims[i] ) {
*status = DAT__DIMIN;
emsRepf("datMap_6d", "datMap: Dimension %d has size %zu but requested size %zu",
status, i, (size_t)locdims[i], (size_t)dims[i]);
goto CLEANUP;
}
}
}
}
/* There is a super-special case for datMap when called with a map
type of "_CHAR". In that case we need to work out the size ourselves
and adjust the type size */
if (strcmp( "_CHAR", normtypestr ) == 0 ) {
size_t clen = 0;
char tmpbuff[DAT__SZTYP+1];
datClen( locator, &clen, status );
CALLHDFQ( H5Tset_size( h5type, clen ) );
one_snprintf( tmpbuff, sizeof(tmpbuff), "*%zu",
status, clen );
one_strlcat( normtypestr, tmpbuff, DAT__SZTYP+1, status );
}
/* Now we want the HDSTYPE of the requested type so that we can work out how much
memory we will need to allocate. */
CALLHDFE( size_t, nbytes,
H5Tget_size( h5type ),
DAT__HDF5E,
emsRep("datLen_size", "datMap: Error obtaining size of requested data type",
status)
);
{
int i;
if (ndim > 0) {
for (i = 0; i < ndim; i++) {
nbytes *= dims[i];
}
}
}
/* Work out whether memory mapping is possible -- at the moment
I'm pretty sure the only safe use of mmap is when we are reading
the data and the file itself was opened readonly. I'm not sure what happens
if other components are removed or added -- will the offset change? Maybe we just try */
offset = H5Dget_offset( locator->dataset_id );
if (offset != HADDR_UNDEF) {
hid_t dataset_h5type = 0;
/* In theory we can do a memory map so now compare
the data types of the request and the low-level dataset. */
CALLHDFE( hid_t, dataset_h5type,
H5Dget_type( locator->dataset_id ),
DAT__HDF5E,
emsRep("datMap_type", "datType: Error obtaining data type of dataset", status)
);
if (H5Tequal( dataset_h5type, h5type )) {
try_mmap = HDS_TRUE;
}
H5Tclose(dataset_h5type);
}
/* If this is a locator to a slice then for now we can't memory map. In theory
if we knew the slice was contiguous (e.g a vectorized slice, or a single
plane of a cube then we could mmap it anyhow. We do not want to have to
emulate HDF5 dataspaces here */
if (locator->isslice) try_mmap = 0;
/* There seem to be issues doing this on files opened for update/write.
For now only allow mmap for files opened read only */
if (intent != H5F_ACC_RDONLY) try_mmap = 0;
/* If mmap has been disabled by tuning the environment we just force it off here. */
if (!hds1GetUseMmap()) try_mmap = 0;
#if DEBUG_HDS
{
char *name_str;
char * file_str;
const char * reason;
name_str = dat1GetFullName( locator->dataset_id, 0, NULL, status );
file_str = dat1GetFullName( locator->dataset_id, 1, NULL, status );
if (offset != HADDR_UNDEF) {
reason = "[HAD offset]";
} else {
reason = "[no offset]";
}
if (!try_mmap) {
printf("Will NOT attempt %s to mmap %s:%s\n",reason,file_str,name_str);
} else {
printf("WILL TRY %s to mmap OFFSET=%zu %s:%s\n", reason, (size_t)offset, file_str, name_str);
}
MEM_FREE(name_str);
}
#endif
if (try_mmap) {
int fd = 0;
int flags = 0;
int prot = 0;
hdsbool_t opened_fd = 0;
if ( intent == H5F_ACC_RDONLY || accmode == HDSMODE_READ ) {
flags |= O_RDONLY;
prot = PROT_READ;
} else {
flags |= O_RDWR;
prot = PROT_READ | PROT_WRITE;
}
if (*status == SAI__OK) {
/* see what file driver we have */
hid_t fapl_id = -1;
hid_t fdriv_id = -1;
void * file_handle = NULL;
herr_t herr = -1;
fapl_id = H5Fget_access_plist(locator->file_id);
fdriv_id = H5Pget_driver(fapl_id);
if (fdriv_id == H5FD_SEC2 || fdriv_id == H5FD_STDIO) {
/* If this is a POSIX or STDIO driver we get the handle */
herr = H5Fget_vfd_handle( locator->file_id, fapl_id, (void**)&file_handle);
if (herr >= 0) {
if (fdriv_id == H5FD_SEC2) {
fd = *((int *)file_handle);
} else if (fdriv_id == H5FD_STDIO) {
FILE * fh = (FILE *)file_handle;
fd = fileno(fh);
}
}
}
if (fapl_id > 0) H5Pclose( fapl_id );
if (fd == 0) {
/* We have to open the file ourselves! */
char * fname = NULL;
fname = dat1GetFullName( locator->dataset_id, 1, NULL, status );
fd = open(fname, flags);
opened_fd = 1;
if (fname) MEM_FREE(fname);
}
if (fd > 0) {
/* Set up for memory mapping */
int mflags = 0;
mflags = MAP_SHARED | MAP_FILE;
if (*status == SAI__OK) {
mapped = dat1Mmap( nbytes, prot, mflags, fd, offset, &isreg, ®pntr, &actbytes, status );
if (*status == SAI__OK) {
/* Store the file descriptor in the locator to allow us to close */
if (mapped) {
if (opened_fd) locator->fdmap = fd;
locator->uses_true_mmap = 1;
}
} else {
/* Not currently fatal -- we can try without the file */
if (opened_fd) close(fd);
emsAnnul(status);
}
}
}
}
}
/* If we have not been able to map anything yet, just get some memory. It is
zeroed (for WRITE) to match mmap behavior. We rely on the OS to decide when it is reasonable
to do an anonymous mmap. */
if (!regpntr) {
hdsbool_t mustget;
mustget = (accmode == HDSMODE_READ || accmode == HDSMODE_UPDATE);
if (mustget) {
regpntr = cnfMalloc( nbytes );
} else {
regpntr = cnfCalloc( 1, nbytes );
}
if (!regpntr) {
*status = DAT__NOMEM;
emsRepf("datMap_cnf","datMap: Unable to allocate %zu bytes of memory",
status, nbytes);
goto CLEANUP;
}
/* Populate the memory - check with datState occurred earlier */
if (mustget) {
datGet( locator, normtypestr, ndim, dims, regpntr, status );
}
}
CLEANUP:
/* Cleanups that must happen always */
if (h5type) H5Tclose(h5type);
/* cleanups that only happen if status is bad */
if (*status != SAI__OK) {
if (mapped) {
if (isreg == 1) cnfUregp( regpntr );
if ( munmap( mapped, actbytes ) != 0 ) {
emsSyser( "MESSAGE", errno );
emsRep("datMap_4", "Error unmapping mapped memory: ^MESSAGE", status);
}
mapped = NULL;
} else if (regpntr) {
cnfFree( regpntr );
}
regpntr = NULL;
}
/* Update the locator to reflect the mapped status */
if (*status == SAI__OK) {
int i;
locator->pntr = mapped;
locator->regpntr = regpntr;
locator->bytesmapped = actbytes;
locator->accmode = accmode;
/* In order to copy the data back into the underlying HDF5 dataset
we need to store additional information about how this was mapped
to allow us to either call datPut later on or at least a new
dataspace. For now store the arguments so we can pass them straight
to datPut */
locator->ndims = ndim;
for (i=0; i<ndim; i++) {
(locator->mapdims)[i] = dims[i];
}
star_strlcpy( locator->maptype, normtypestr, sizeof(locator->maptype) );
}
/* Note that the returned pointer is not necessarily the same as the
mapped pointer because of pagesize corrections */
*pntr = regpntr;
return *status;
}
/*
* Open a file through the HDF5 interface.
*/
static void *HDF5_Open(char *testFileName, IOR_param_t * param)
{
hid_t accessPropList, createPropList;
hsize_t memStart[NUM_DIMS],
dataSetDims[NUM_DIMS],
memStride[NUM_DIMS],
memCount[NUM_DIMS], memBlock[NUM_DIMS], memDataSpaceDims[NUM_DIMS];
int tasksPerDataSet;
unsigned fd_mode = (unsigned)0;
hid_t *fd;
MPI_Comm comm;
MPI_Info mpiHints = MPI_INFO_NULL;
fd = (hid_t *) malloc(sizeof(hid_t));
if (fd == NULL)
ERR("malloc() failed");
/*
* HDF5 uses different flags than those for POSIX/MPIIO
*/
if (param->open == WRITE) { /* WRITE flags */
param->openFlags = IOR_TRUNC;
} else { /* READ or check WRITE/READ flags */
param->openFlags = IOR_RDONLY;
}
/* set IOR file flags to HDF5 flags */
/* -- file open flags -- */
if (param->openFlags & IOR_RDONLY) {
fd_mode |= H5F_ACC_RDONLY;
}
if (param->openFlags & IOR_WRONLY) {
fprintf(stdout, "File write only not implemented in HDF5\n");
}
if (param->openFlags & IOR_RDWR) {
fd_mode |= H5F_ACC_RDWR;
}
if (param->openFlags & IOR_APPEND) {
fprintf(stdout, "File append not implemented in HDF5\n");
}
if (param->openFlags & IOR_CREAT) {
fd_mode |= H5F_ACC_CREAT;
}
if (param->openFlags & IOR_EXCL) {
fd_mode |= H5F_ACC_EXCL;
}
if (param->openFlags & IOR_TRUNC) {
fd_mode |= H5F_ACC_TRUNC;
}
if (param->openFlags & IOR_DIRECT) {
fprintf(stdout, "O_DIRECT not implemented in HDF5\n");
}
/* set up file creation property list */
createPropList = H5Pcreate(H5P_FILE_CREATE);
HDF5_CHECK(createPropList, "cannot create file creation property list");
/* set size of offset and length used to address HDF5 objects */
HDF5_CHECK(H5Pset_sizes
(createPropList, sizeof(hsize_t), sizeof(hsize_t)),
"cannot set property list properly");
/* set up file access property list */
accessPropList = H5Pcreate(H5P_FILE_ACCESS);
HDF5_CHECK(accessPropList, "cannot create file access property list");
/*
* someday HDF5 implementation will allow subsets of MPI_COMM_WORLD
*/
/* store MPI communicator info for the file access property list */
if (param->filePerProc) {
comm = MPI_COMM_SELF;
} else {
comm = testComm;
}
SetHints(&mpiHints, param->hintsFileName);
/*
* note that with MP_HINTS_FILTERED=no, all key/value pairs will
* be in the info object. The info object that is attached to
* the file during MPI_File_open() will only contain those pairs
* deemed valid by the implementation.
*/
/* show hints passed to file */
if (rank == 0 && param->showHints) {
fprintf(stdout, "\nhints passed to access property list {\n");
ShowHints(&mpiHints);
fprintf(stdout, "}\n");
}
HDF5_CHECK(H5Pset_fapl_mpio(accessPropList, comm, mpiHints),
"cannot set file access property list");
/* set alignment */
HDF5_CHECK(H5Pset_alignment(accessPropList, param->setAlignment,
param->setAlignment),
"cannot set alignment");
/* open file */
if (param->open == WRITE) { /* WRITE */
*fd = H5Fcreate(testFileName, fd_mode,
createPropList, accessPropList);
HDF5_CHECK(*fd, "cannot create file");
} else { /* READ or CHECK */
*fd = H5Fopen(testFileName, fd_mode, accessPropList);
HDF5_CHECK(*fd, "cannot open file");
}
/* show hints actually attached to file handle */
if (param->showHints || (1) /* WEL - this needs fixing */ ) {
if (rank == 0
&& (param->showHints) /* WEL - this needs fixing */ ) {
WARN("showHints not working for HDF5");
}
} else {
MPI_Info mpiHintsCheck = MPI_INFO_NULL;
hid_t apl;
apl = H5Fget_access_plist(*fd);
HDF5_CHECK(H5Pget_fapl_mpio(apl, &comm, &mpiHintsCheck),
"cannot get info object through HDF5");
if (rank == 0) {
fprintf(stdout,
"\nhints returned from opened file (HDF5) {\n");
ShowHints(&mpiHintsCheck);
fprintf(stdout, "}\n");
if (1 == 1) { /* request the MPIIO file handle and its hints */
MPI_File *fd_mpiio;
HDF5_CHECK(H5Fget_vfd_handle
(*fd, apl, (void **)&fd_mpiio),
"cannot get MPIIO file handle");
MPI_CHECK(MPI_File_get_info
(*fd_mpiio, &mpiHintsCheck),
"cannot get info object through MPIIO");
fprintf(stdout,
"\nhints returned from opened file (MPIIO) {\n");
ShowHints(&mpiHintsCheck);
fprintf(stdout, "}\n");
}
}
MPI_CHECK(MPI_Barrier(testComm), "barrier error");
}
/* this is necessary for resetting various parameters
needed for reopening and checking the file */
newlyOpenedFile = TRUE;
HDF5_CHECK(H5Pclose(createPropList),
"cannot close creation property list");
HDF5_CHECK(H5Pclose(accessPropList),
"cannot close access property list");
/* create property list for serial/parallel access */
xferPropList = H5Pcreate(H5P_DATASET_XFER);
HDF5_CHECK(xferPropList, "cannot create transfer property list");
/* set data transfer mode */
if (param->collective) {
HDF5_CHECK(H5Pset_dxpl_mpio(xferPropList, H5FD_MPIO_COLLECTIVE),
"cannot set collective data transfer mode");
} else {
HDF5_CHECK(H5Pset_dxpl_mpio
(xferPropList, H5FD_MPIO_INDEPENDENT),
"cannot set independent data transfer mode");
}
/* set up memory data space for transfer */
memStart[0] = (hsize_t) 0;
memCount[0] = (hsize_t) 1;
memStride[0] = (hsize_t) (param->transferSize / sizeof(IOR_size_t));
memBlock[0] = (hsize_t) (param->transferSize / sizeof(IOR_size_t));
memDataSpaceDims[0] = (hsize_t) param->transferSize;
memDataSpace = H5Screate_simple(NUM_DIMS, memDataSpaceDims, NULL);
HDF5_CHECK(memDataSpace, "cannot create simple memory data space");
/* define hyperslab for memory data space */
HDF5_CHECK(H5Sselect_hyperslab(memDataSpace, H5S_SELECT_SET,
memStart, memStride, memCount,
memBlock), "cannot create hyperslab");
/* set up parameters for fpp or different dataset count */
if (param->filePerProc) {
tasksPerDataSet = 1;
} else {
if (param->individualDataSets) {
/* each task in segment has single data set */
tasksPerDataSet = 1;
} else {
/* share single data set across all tasks in segment */
tasksPerDataSet = param->numTasks;
}
}
dataSetDims[0] = (hsize_t) ((param->blockSize / sizeof(IOR_size_t))
* tasksPerDataSet);
/* create a simple data space containing information on size
and shape of data set, and open it for access */
dataSpace = H5Screate_simple(NUM_DIMS, dataSetDims, NULL);
HDF5_CHECK(dataSpace, "cannot create simple data space");
return (fd);
}
/*-------------------------------------------------------------------------
* Function: test_windows
*
* Purpose: Tests the file handle interface for WINDOWS driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Dana Robinson
* Tuesday, March 22, 2011
*
*-------------------------------------------------------------------------
*/
static herr_t
test_windows(void)
{
#ifdef H5_HAVE_WINDOWS
hid_t file = -1;
hid_t fapl = -1;
hid_t access_fapl = -1;
char filename[1024];
int *fhandle = NULL;
hsize_t file_size = 0;
#endif /*H5_HAVE_WINDOWS*/
TESTING("WINDOWS file driver");
#ifndef H5_HAVE_WINDOWS
SKIPPED();
return 0;
#else /* H5_HAVE_WINDOWS */
/* Set property list and file name for WINDOWS driver. */
fapl = h5_fileaccess();
if(H5Pset_fapl_windows(fapl) < 0)
TEST_ERROR;
h5_fixname(FILENAME[8], fapl, filename, sizeof filename);
if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* Check that the driver is correct */
if(H5FD_WINDOWS!= H5Pget_driver(access_fapl))
TEST_ERROR;
/* ...and close the property list */
if(H5Pclose(access_fapl) < 0)
TEST_ERROR;
/* Check file handle API */
if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle < 0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no guarantee the size of metadata in file is constant.
* Just try to check if it's reasonable. It's 2KB right now.
*/
if(file_size < 1 * KB || file_size > 4 * KB)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose(fapl);
H5Fclose(file);
} H5E_END_TRY;
return -1;
#endif /* H5_HAVE_WINDOWS */
}
/*-------------------------------------------------------------------------
* Function: test_log
*
* Purpose: Tests the file handle interface for log driver
*
* Return: Success: 0
* Failure: -1
*
* Programmer: Dana Robinson
* Tuesday, March 22, 2011
*
*-------------------------------------------------------------------------
*/
static herr_t
test_log(void)
{
hid_t file = -1;
hid_t fapl = -1;
hid_t access_fapl = -1;
char filename[1024];
int *fhandle = NULL;
hsize_t file_size = 0;
unsigned int flags = H5FD_LOG_ALL;
size_t buf_size = 4 * KB;
TESTING("LOG file driver");
/* Set property list and file name for log driver. */
fapl = h5_fileaccess();
if(H5Pset_fapl_log(fapl, LOG_FILENAME, flags, buf_size) < 0)
TEST_ERROR;
h5_fixname(FILENAME[6], fapl, filename, sizeof filename);
/* Create the test file */
if((file = H5Fcreate(filename, H5F_ACC_TRUNC, H5P_DEFAULT, fapl)) < 0)
TEST_ERROR;
/* Retrieve the access property list... */
if((access_fapl = H5Fget_access_plist(file)) < 0)
TEST_ERROR;
/* Check that the driver is correct */
if(H5FD_LOG != H5Pget_driver(access_fapl))
TEST_ERROR;
/* ...and close the property list */
if(H5Pclose(access_fapl) < 0)
TEST_ERROR;
/* Check file handle API */
if(H5Fget_vfd_handle(file, H5P_DEFAULT, (void **)&fhandle) < 0)
TEST_ERROR;
if(*fhandle < 0)
TEST_ERROR;
/* Check file size API */
if(H5Fget_filesize(file, &file_size) < 0)
TEST_ERROR;
/* There is no guarantee the size of metadata in file is constant.
* Just try to check if it's reasonable. It's 2KB right now.
*/
if(file_size < 1 * KB || file_size > 4 * KB)
TEST_ERROR;
if(H5Fclose(file) < 0)
TEST_ERROR;
h5_cleanup(FILENAME, fapl);
PASSED();
return 0;
error:
H5E_BEGIN_TRY {
H5Pclose(fapl);
H5Fclose(file);
} H5E_END_TRY;
return -1;
}
