LOCAL void SIO_HwOpen (struct FDL_ChannelHandler *channel, unsigned int divider)
{
UartPort_T *port = (UartPort_T *) channel->priv;
#if defined(CONFIG_SC7710G2)
if(port->regBase == ARM_UART3_BASE){
/* Disable UART*/
* ( (volatile unsigned int *) (GR_CTRL_REG1)) &= ~ (GR_UART3_CTRL_EN);
/*Disable Interrupt */
* (volatile unsigned int *) (port->regBase + ARM_UART_IEN) = 0;
/* Enable UART*/
* (volatile unsigned int *) GR_CTRL_REG1 |= (GR_UART3_CTRL_EN);
} else
#endif
{
/* Disable UART*/
* ( (volatile unsigned int *) (GR_CTRL_REG)) &= ~ (GR_UART_CTRL_EN);
/*Disable Interrupt */
* (volatile unsigned int *) (port->regBase + ARM_UART_IEN) = 0;
/* Enable UART*/
* (volatile unsigned int *) GR_CTRL_REG |= (GR_UART_CTRL_EN);
}
/* Set baud rate */
* (volatile unsigned int *) (port->regBase + ARM_UART_CLKD0) = LWORD (divider);
* (volatile unsigned int *) (port->regBase + ARM_UART_CLKD1) = HWORD (divider);
/* Set port for 8 bit, one stop, no parity */
* (volatile unsigned int *) (port->regBase + ARM_UART_CTL0) = UARTCTL_BL8BITS | UARTCTL_SL1BITS;
* (volatile unsigned int *) (port->regBase+ ARM_UART_CTL1) = 0;
* (volatile unsigned int *) (port->regBase + ARM_UART_CTL2) = 0;
}
extern "C" void FCExport FmsCreateAuthAdaptor3(IFmsAuthServerContext2* pAuthServerCtx,
IFmsAuthAdaptor*& pFmsAuthAdaptor, U32& iVersion)
{
pFmsAuthAdaptor = new FmsAuthAdaptor(pAuthServerCtx);
U32 version = pAuthServerCtx->getVersion();
U16 w2 = LWORD(version);
U16 w1 = HWORD(version);
iVersion = MKLONG(INTERFACE_MINOR_VERSION, INTERFACE_MAJOR_VERSION);
char buf[1024];
char *ptr = buf;
int valueLen = pAuthServerCtx->getConfig("UserKey1", &ptr, sizeof(buf));
if (!valueLen)
{
valueLen = pAuthServerCtx->getConfig("UserKey2", &ptr, sizeof(buf));
if (!valueLen)
{
return;
}
if (valueLen < 0)
{
// failed to find this key
return;
}
}
if (valueLen < 0)
{
// failed to find this key
return;
}
// value length is bigger then the buffer size, and a real adaptor should
// allocate valueLen + 1 bytes and call again
}
LOCAL int SIO_SetBaudrate (struct FDL_ChannelHandler *channel, unsigned int baudrate)
{
#if 0
channel->Open (channel, baudrate);
#else
unsigned int divider;
UartPort_T *port = (UartPort_T *) channel->priv;
divider = SIO_GetHwDivider (baudrate);
/* Set baud rate */
* (volatile unsigned int *) (port->regBase + ARM_UART_CLKD0) = LWORD (divider);
* (volatile unsigned int *) (port->regBase + ARM_UART_CLKD1) = HWORD (divider);
#endif
return 0;
}
