/*******************************************************************************
* Function Name : main
* Description : Main program
* Input : None
* Output : None
* Return : None
* Attention : None
*******************************************************************************/
int main (void) {
uint32_t n;
uint32_t ret;
SysTick_Config(SystemCoreClock / 1000);
#ifdef CFG_SDCARD
/* Setup SD Card/FATFS */
SDInit();
#endif
debug_frmwrk_init();
printf("\r\n hello");
//for (n = 0; n < MSC_ImageSize; n++) { /* Copy Initial Disk Image */
// Memory[n] = DiskImage[n]; /* from Flash to RAM */
//}
if(!KEY1_PIN)
{
UsbMode = 0;
while(!KEY1_PIN);
delay(100000);
while(!KEY1_PIN);
}
if(UsbMode == 0){
USB_Init(); /* USB Initialization */
USB_Connect(TRUE); /* USB Connect */
}
else{
Host_Init(); // Initialize the lpc17xx host controller
if( Host_EnumDev() == 0 ) /* Enumerate the device connected */
{
printf("-- USB device detected OK \r\n");
}
else
{
printf("-- Please connect a USB device \r\n");
while( Host_EnumDev() == 0 );
printf("-- USB device connection detected \r\n");
Delay(0x00ffff);
}
}
while (1){
if(!KEY1_PIN)
{
ret = Host_CtrlSend(0x40, 0x50, 0, 0, 0, NULL);
printf("\r\n sent switch cmd,ret= %x ",ret);
delay(100);
NVIC_SystemReset();
}
}
}
int main()
{
int32_t rc;
uint32_t numBlks, blkSize;
uint8_t inquiryResult[INQUIRY_LENGTH];
/* SystemClockUpdate() updates the SystemFrequency variable */
SystemClockUpdate();
UART_Init(57600); /* Initialize the serial port to view the log messages */
Host_Init(); /* Initialize the lpc17xx host controller */
rc = Host_EnumDev(); /* Enumerate the device connected */
if (rc == OK) {
/* Initialize the mass storage and scsi interfaces */
rc = MS_Init( &blkSize, &numBlks, inquiryResult );
if (rc == OK) {
rc = FAT_Init(); /* Initialize the FAT16 file system */
if (rc == OK) {
Main_Copy(); /* Call the application */
} else {
return (0);
}
} else {
return (0);
}
} else {
return (0);
}
while(1);
}
/*********************************************************************//**
* @brief This function is the main function where the execution begins
* @param[in] None
* @return None
**********************************************************************/
int main()
{
int32_t rc;
uint32_t numBlks, blkSize;
uint8_t buffer[30];
UINT nun;
uint8_t inquiryResult[INQUIRY_LENGTH];
FATFS fs;
FIL fsrc, fdst;
const TCHAR a=1;
SystemInit();
debug_frmwrk_init();
print_menu();
Host_Init(); /* Initialize the lpc17xx host controller */
PRINT_Log("Host Initialized\r\n");
PRINT_Log("Connect a Mass Storage device\r\n");
rc = Host_EnumDev(); /* Enumerate the device connected */
PRINT_Log("Á¬½ÓÉ豸\r\n");
if ((rc == USB_HOST_FUNC_OK) && (Host_GetDeviceType() == MASS_STORAGE_DEVICE))
{
PRINT_Log("Mass Storage device connected\r\n");
rc = f_mount(&fs,"0:",1);
if(rc==0)
{
rc = f_open(&fdst, "0:read.txt", FA_READ);
if(rc==0)
{
PRINT_Log("open ok\r\n");
f_read (&fdst, buffer, 30, &nun );
PRINT_Log(buffer);
f_close(&fdst);
}
}
}
else {
PRINT_Log("Not a Mass Storage device\n");
return (0);
}
return 0;
}
DSTATUS disk_initialize(BYTE drv /* Physical drive nmuber (0..) */
)
{
DSTATUS stat;
int result;
(void) result;
switch (drv)
{
case ATA:
// result = ATA_disk_initialize();
stat = STA_NOINIT;
// translate the result code here
return stat;
case MMC:
stat = MMC_disk_initialize();
return stat;
case USB:
#if WITH_USB_MS
/* USB host init and enumeration */
if ( usb_status & STA_NOINIT ) {
Host_Init();
if ( Host_EnumDev() == OK ) {
/* mass-storage init */
if ( MS_Init(&blkSize, &numBlks, inquiryResult) == OK ) {
usb_status &= ~STA_NOINIT;
} else {
/* MS init fail */
}
} else {
/* host init and/or enum fail */
}
}
return usb_status;
#else
stat = STA_NOINIT;
return stat;
#endif
}
return STA_NOINIT;
}
int main()
{
USB_INT32S rc;
USB_INT32U numBlks, blkSize;
USB_INT08U inquiryResult[INQUIRY_LENGTH];
// Code Red - if CMSIS 1.3 setup is being used, then SystemInit() routine
// will be called by startup code rather than in application's main()
#ifndef __USE_CMSIS
SystemInit(); /* initialize clocks */
#endif
UART_Init(115200); /* Initialize the serial port to view the log messages */
Host_Init(); /* Initialize the lpc17xx host controller */
rc = Host_EnumDev(); /* Enumerate the device connected */
if (rc == OK) {
/* Initialize the mass storage and scsi interfaces */
rc = MS_Init( &blkSize, &numBlks, inquiryResult );
if (rc == OK) {
rc = FAT_Init(); /* Initialize the FAT16 file system */
if (rc == OK) {
Main_Copy(); /* Call the application */
} else {
while ( 1 );
return (0);
}
} else {
while ( 1 );
return (0);
}
} else {
while ( 1 );
return (0);
}
while(1);
}