void readEeprom(void){
BOOL success = FALSE;
int index;
do {
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
#ifdef DEBUG
printf("FAILED initial transfer!\n");
#endif
break;
}
// Transmit the slave's address to notify it
if (!I2C_sendData(THERMAL_I2C_ID,EEPROM_WRITE_ADDRESS))
break;
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,EEPROM_READ_COMMAND)){
#ifdef DEBUG
printf("Error: Sent byte was not acknowledged\n");
#endif
break;
}
// Send a Repeated Started condition
if(!I2C_startTransfer(THERMAL_I2C_ID,TRUE)){
#ifdef DEBUG
printf("FAILED Repeated start!\n");
#endif
break;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(THERMAL_I2C_ID,EEPROM_READ_ADDRESS))
break;
// Read the I2C bus most significant byte and send an acknowledge bit
for(index = 0; index <=0xFF; index++){
eepromData[index] = I2C_getData(THERMAL_I2C_ID);
if(index < 0xFF)
I2CAcknowledgeByte(I2C1, TRUE);
else
I2CAcknowledgeByte(I2C1, FALSE);
while(!I2CAcknowledgeHasCompleted(I2C1));
}
success = TRUE;
} while(0);
// Send the stop bit to finish the transfer
I2C_stopTransfer(THERMAL_I2C_ID);
if(!success){
printf("Data transfer unsuccessful.\n");
return;
}
// Stop transfer twice?
I2C_stopTransfer(THERMAL_I2C_ID);
int Index;
for(Index = 0; Index <=255; Index++){
while(!Serial_isTransmitEmpty());
//printf("EEPROM %x / %d: %x\n", Index, Index, eepromData[Index]);
}
}
void readPixelValue(void){
int Index = 0;
BOOL Success = TRUE;
UINT8 pixelMSB, pixelLSB;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x00)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x01)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x40)){
Success = FALSE;
}
if(Success){
// Send a Repeated Started condition
if(!I2C_startTransfer(THERMAL_I2C_ID,TRUE)){
printf("FAILED Repeated start!\n");
Success = FALSE;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_ADDRESS)){
Success = FALSE;
}
}
if(Success){
// Read the I2C bus most significan byte and send an acknowledge bit
for(Index = 0; Index <=63; Index++){
pixelLSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(I2C1, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
pixelMSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(I2C1, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
pixelData[Index] = (pixelMSB << 8) + pixelLSB;
if(pixelData[Index] > 32767)
pixelData[Index] = pixelData[Index] - 65536;
}
}
I2C_stopTransfer(THERMAL_I2C_ID);
}
uint16_t readSensor(int SLAVE_READ_ADDRESS,int SLAVE_WRITE_ADDRESS) {
int8_t success = FALSE;
uint16_t data = 0;
do {
// Send the start bit with the restart flag low
if(!I2C_startTransfer(ENCODER_I2C_ID, I2C_WRITE )){
#ifdef DEBUG
printf("FAILED initial transfer!\n");
#endif
break;
}
// Transmit the slave's address to notify it
if (!I2C_sendData(ENCODER_I2C_ID, SLAVE_WRITE_ADDRESS))
break;
// Tranmit the read address module
if(!I2C_sendData(ENCODER_I2C_ID,SLAVE_ANGLE_ADDRESS)){
#ifdef DEBUG
printf("Error: Sent byte was not acknowledged\n");
#endif
break;
}
// Send a Repeated Started condition
if(!I2C_startTransfer(ENCODER_I2C_ID,I2C_READ)){
#ifdef DEBUG
printf("FAILED Repeated start!\n");
#endif
break;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(ENCODER_I2C_ID, SLAVE_READ_ADDRESS))
break;
// Read the I2C bus twice
data = (I2C_getData(ENCODER_I2C_ID) << 6);
I2C_acknowledgeRead(ENCODER_I2C_ID, TRUE);
while(!I2C_hasAcknowledged(ENCODER_I2C_ID));
data |= (I2C_getData(ENCODER_I2C_ID) & 0x3F);
// Send the stop bit to finish the transfer
I2C_stopTransfer(ENCODER_I2C_ID);
success = TRUE;
} while(0);
if (!success) {
#ifdef DEBUG
printf("Data transfer unsuccessful.\n");
#endif
return FALSE;
}
return data;
}
void readCPixelValue(void){
BOOL Success = TRUE;
UINT8 CPixelMSB, CPixelLSB;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x91)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x00)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x01)){
Success = FALSE;
}
if(Success){
// Send a Repeated Started condition
if(!I2C_startTransfer(THERMAL_I2C_ID,TRUE)){
printf("FAILED Repeated start!\n");
Success = FALSE;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_ADDRESS)){
Success = FALSE;
}
}
if(Success){
// Read the I2C bus most significan byte and send an acknowledge bit
CPixelLSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(I2C1, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
CPixelMSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(I2C1, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
CPixel = (CPixelMSB << 8) + CPixelLSB;
}
I2C_stopTransfer(THERMAL_I2C_ID);
if(CPixel > 32767){
CPixel = CPixel - 65536;
}
}
void readChipTemp(void){
BOOL Success = TRUE;
UINT8 tempMSB, tempLSB;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x90)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x00)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x01)){
Success = FALSE;
}
if(Success){
// Send a Repeated Started condition
if(!I2C_startTransfer(THERMAL_I2C_ID,TRUE)){
printf("FAILED Repeated start!\n");
Success = FALSE;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_ADDRESS)){
Success = FALSE;
}
}
if(Success){
// Read the I2C bus most significan byte and send an acknowledge bit
tempLSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(THERMAL_I2C_ID, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
tempMSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(THERMAL_I2C_ID, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
}
I2C_stopTransfer(THERMAL_I2C_ID);
rawTemp = (tempMSB << 8) + tempLSB;
}
void readConfigReg(void){
BOOL Success = TRUE;
UINT8 configMSB, configLSB;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x92)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x00)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,0x01)){
Success = FALSE;
}
if(Success){
// Send a Repeated Started condition
if(!I2C_startTransfer(THERMAL_I2C_ID,TRUE)){
printf("FAILED Repeated start!\n");
Success = FALSE;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(THERMAL_I2C_ID,CAMERA_READ_ADDRESS)){
Success = FALSE;
}
}
if(Success){
// Read the I2C bus most significan byte and send an acknowledge bit
configLSB = I2C_getData(THERMAL_I2C_ID);
I2CAcknowledgeByte(I2C1, TRUE);
while(!I2CAcknowledgeHasCompleted(THERMAL_I2C_ID));
configMSB = I2C_getData(THERMAL_I2C_ID);
}
I2C_stopTransfer(THERMAL_I2C_ID);
//while(!IsTransmitEmpty());
//printf("Config Data %x %x\n", configMSB, configLSB);
}
static uint16_t readDevice(uint8_t deviceReadAddress, uint8_t deviceWriteAddress, uint8_t dataAddress) {
char success = FALSE;
uint16_t data = 0;
do {
// Send the start bit with the restart flag low
if(!I2C_startTransfer(ENCODER_I2C_ID, I2C_WRITE )){
DBPRINT("Encoder: FAILED initial transfer!\n");
break;
}
// Transmit the slave's address to notify it
if (!I2C_sendData(ENCODER_I2C_ID, deviceWriteAddress))
break;
// Tranmit the read address module
if(!I2C_sendData(ENCODER_I2C_ID, dataAddress)){
DBPRINT("Encoder: Error: Sent byte was not acknowledged\n");
break;
}
// Send a Repeated Started condition
if(!I2C_startTransfer(ENCODER_I2C_ID,I2C_READ)){
DBPRINT("Encoder: FAILED Repeated start!\n");
break;
}
// Transmit the address with the READ bit set
if (!I2C_sendData(ENCODER_I2C_ID, deviceReadAddress))
break;
// Read the I2C bus twice
data = (I2C_getData(ENCODER_I2C_ID) << 6);
I2C_acknowledgeRead(ENCODER_I2C_ID, TRUE);
while(!I2C_hasAcknowledged(ENCODER_I2C_ID));
data |= (I2C_getData(ENCODER_I2C_ID) & 0x3F);
// Send the stop bit to finish the transfer
I2C_stopTransfer(ENCODER_I2C_ID);
success = TRUE;
} while(0);
if (!success) {
DBPRINT("Encoder: Data transfer unsuccessful.\n");
return FALSE;
}
return data;
}
void writeConfigReg(void){
BOOL Success = TRUE;
UINT8 MSByte, LSByte, MSByteCheck, LSByteCheck;
LSByte = eepromData[245];
LSByte &= 0xF0;
LSByte |= 0x0C;
LSByteCheck = LSByte - 0x55;
MSByte = eepromData[246];
MSByteCheck = MSByte - 0x55;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_CONFIG_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,LSByteCheck)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,LSByte)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,MSByteCheck)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,MSByte)){
Success = FALSE;
}
I2C_stopTransfer(THERMAL_I2C_ID);
}
void writeTrimmingValue(void){
BOOL Success = TRUE;
UINT8 MSByte, LSByte, MSByteCheck, LSByteCheck;
LSByte = eepromData[247];
LSByteCheck = LSByte - 0xAA;
MSByte = 0x00;
MSByteCheck = 0x56;
if(!I2C_startTransfer(THERMAL_I2C_ID, FALSE)){
printf("FAILED initial transfer!\n");
Success = FALSE;
}
// Transmit the slave's address to notify it
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_ADDRESS)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,CAMERA_WRITE_TRIM_COMMAND)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,LSByteCheck)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,LSByte)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,MSByteCheck)){
Success = FALSE;
}
// Tranmit the read address module
if(!I2C_sendData(THERMAL_I2C_ID,MSByte)){
Success = FALSE;
}
I2C_stopTransfer(THERMAL_I2C_ID);
}
