static int get_hw_btsmdpa_temp(void)
{
int ret = 0, data[4], i, ret_value = 0, ret_temp = 0, output;
int times=1, Channel=g_RAP_ADC_channel;//6752=0(AUX_IN1_NTC)
if( IMM_IsAdcInitReady() == 0 )
{
printk("[thermal_auxadc_get_data]: AUXADC is not ready\n");
return 0;
}
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
mtkts_btsmdpa_dprintk("[thermal_auxadc_get_data(AUX_IN1_NTC)]: ret_temp=%d\n",ret_temp);
mtkts_btsmdpa_dprintk("[thermal_auxadc_get_data(AUX_IN1_NTC)]: ret_temp=%d\n",ret_temp);
}
//ret = ret*1500/4096 ;
ret = ret*1800/4096;//82's ADC power
mtkts_btsmdpa_dprintk("APtery output mV = %d\n",ret);
output = mtk_ts_btsmdpa_volt_to_temp(ret);
mtkts_btsmdpa_dprintk("BTSMDPA output temperature = %d\n",output);
return output;
}
static int get_hw_battery2_temp(void)
{
int ret = 0, data[4], i, ret_value = 0, ret_temp = 0, output;
int times=1, Channel=0;//6589=1,6582=0(AUX_IN0_NTC)
if( IMM_IsAdcInitReady() == 0 )
{
printk("[thermal_auxadc_get_data]: AUXADC is not ready\n");
return 0;
}
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
mtktsbattery2_dprintk("[thermal_auxadc_get_data(AUX_IN0_NTC)]: ret_temp=%d\n",ret_temp);
}
#if 0
Channel = 0;
ret = 0 ;
ret_temp = 0;
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
printk("[thermal_auxadc_get_data(ADCIN %d)]: ret_temp=%d\n",Channel,ret_temp);
}
Channel = 2;
ret = 0 ;
ret_temp = 0;
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
printk("[thermal_auxadc_get_data(ADCIN %d)]: ret_temp=%d\n",Channel,ret_temp);
}
#endif
//ret = ret*1500/4096 ;
ret = ret*1800/4096;//82's ADC power
mtktsbattery2_dprintk("Battery output mV = %d\n",ret);
output = BattVoltToTemp(ret);
mtktsbattery2_dprintk("Battery output temperature = %d\n",output);
return output;
}
static int get_hw_battery2_temp(void)
{
int data[4], ret_value = 0, ret_temp = 0, output;
if( IMM_IsAdcInitReady() == 0 )
{
mtktsbattery2_dprintk("[thermal_auxadc_get_data]: AUXADC is not ready\n");
return 0;
}
ret_value = IMM_GetOneChannelValue(AUXADC_CHANNEL, data, &ret_temp);
mtktsbattery2_dprintk("[thermal_auxadc_get_data(ADCIN1)]: ret_temp=%d\n",ret_temp);
ret_temp = ret_temp*1500/4096;
output = BattVoltageToTemp(ret_temp);
mtktsbattery2_dprintk("Battery output temperature mV= %d %d\n",output, ret_temp);
return output;
}
static int thermal_auxadc_get_data(int times, int Channel)
{
int ret = 0, data[4], i, ret_value = 0, ret_temp = 0;
if( IMM_IsAdcInitReady() == 0 )
{
// mtktscpu_dprintk("[thermal_auxadc_get_data]: AUXADC is not ready\n");
return 0;
}
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
// mtktscpu_dprintk("[thermal_auxadc_get_data(ADCIN5)]: ret_temp=%d\n",ret_temp);
}
ret = ret / times;
return ret;
}
static int get_hw_bts_temp(void)
{
int ret = 0, data[4], i, ret_value = 0, ret_temp = 0, output;
int times=1, Channel=g_RAP_ADC_channel;//6752=0(AUX_IN0_NTC)
static int valid_temp;
if( IMM_IsAdcInitReady() == 0 )
{
printk("[thermal_auxadc_get_data]: AUXADC is not ready\n");
return 0;
}
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
if (ret_value == -1) // AUXADC is busy
{
ret_temp = valid_temp;
}
else
{
valid_temp = ret_temp;
}
ret += ret_temp;
mtkts_bts_dprintk("[thermal_auxadc_get_data(AUX_IN0_NTC)]: ret_temp=%d\n",ret_temp);
}
//Mt_auxadc_hal.c
//#define VOLTAGE_FULL_RANGE 1500 // VA voltage
//#define AUXADC_PRECISE 4096 // 12 bits
ret = ret*1500/4096 ;
//ret = ret*1800/4096;//82's ADC power
mtkts_bts_dprintk("APtery output mV = %d\n",ret);
output = mtk_ts_bts_volt_to_temp(ret);
mtkts_bts_dprintk("BTS output temperature = %d\n",output);
return output;
}
static kal_int32 read_adc_v_bat_temp(void *data)
{
#if defined(CONFIG_POWER_EXT)
*(kal_int32*)(data) = 0;
#else
#if defined(MTK_PCB_TBAT_FEATURE)
int ret = 0, data[4], i, ret_value = 0, ret_temp = 0;
int Channel=1;
if( IMM_IsAdcInitReady() == 0 )
{
bm_print(BM_LOG_CRTI, "[get_tbat_volt] AUXADC is not ready");
return 0;
}
i = times;
while (i--)
{
ret_value = IMM_GetOneChannelValue(Channel, data, &ret_temp);
ret += ret_temp;
bm_print(BM_LOG_FULL, "[get_tbat_volt] ret_temp=%d\n",ret_temp);
}
ret = ret*1500/4096 ;
ret = ret/times;
bm_print(BM_LOG_CRTI, "[get_tbat_volt] Battery output mV = %d\n",ret);
*(kal_int32*)(data) = ret;
#else
bm_print(BM_LOG_FULL, "[read_adc_v_charger] return PMIC_IMM_GetOneChannelValue(4,times,1);\n");
*(kal_int32*)(data) = PMIC_IMM_GetOneChannelValue(VBATTEMP_CHANNEL_NUMBER,*(kal_int32*)(data),1);
#endif
#endif
return STATUS_OK;
}
