int ath10k_thermal_register(struct ath10k *ar)
{
struct thermal_cooling_device *cdev;
struct device *hwmon_dev;
int ret;
if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
return 0;
cdev = thermal_cooling_device_register("ath10k_thermal", ar,
&ath10k_thermal_ops);
if (IS_ERR(cdev)) {
ath10k_err(ar, "failed to setup thermal device result: %ld\n",
PTR_ERR(cdev));
return -EINVAL;
}
ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
"cooling_device");
if (ret) {
ath10k_err(ar, "failed to create cooling device symlink\n");
goto err_cooling_destroy;
}
ar->thermal.cdev = cdev;
ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT;
/* Do not register hwmon device when temperature reading is not
* supported by firmware
*/
if (!(ar->wmi.ops->gen_pdev_get_temperature))
return 0;
/* Avoid linking error on devm_hwmon_device_register_with_groups, I
* guess linux/hwmon.h is missing proper stubs.
*/
if (!IS_REACHABLE(CONFIG_HWMON))
return 0;
hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
"ath10k_hwmon", ar,
ath10k_hwmon_groups);
if (IS_ERR(hwmon_dev)) {
ath10k_err(ar, "failed to register hwmon device: %ld\n",
PTR_ERR(hwmon_dev));
ret = -EINVAL;
goto err_remove_link;
}
return 0;
err_remove_link:
sysfs_remove_link(&ar->dev->kobj, "cooling_device");
err_cooling_destroy:
thermal_cooling_device_unregister(cdev);
return ret;
}
static int exynos_adc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
if (IS_REACHABLE(CONFIG_INPUT) && info->input) {
free_irq(info->tsirq, info);
input_unregister_device(info->input);
}
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
iio_device_unregister(indio_dev);
free_irq(info->irq, info);
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
exynos_adc_unprepare_clk(info);
regulator_disable(info->vdd);
return 0;
}
/* Clear all weakrefs to unreachable objects, and if such a weakref has a
* callback, invoke it if necessary. Note that it's possible for such
* weakrefs to be outside the unreachable set -- indeed, those are precisely
* the weakrefs whose callbacks must be invoked. See gc_weakref.txt for
* overview & some details. Some weakrefs with callbacks may be reclaimed
* directly by this routine; the number reclaimed is the return value. Other
* weakrefs with callbacks may be moved into the `old` generation. Objects
* moved into `old` have gc_refs set to GC_REACHABLE; the objects remaining in
* unreachable are left at GC_TENTATIVELY_UNREACHABLE. When this returns,
* no object in `unreachable` is weakly referenced anymore.
*/
static int
handle_weakrefs(PyGC_Head *unreachable, PyGC_Head *old)
{
PyGC_Head *gc;
PyObject *op; /* generally FROM_GC(gc) */
PyWeakReference *wr; /* generally a cast of op */
PyGC_Head wrcb_to_call; /* weakrefs with callbacks to call */
PyGC_Head *next;
int num_freed = 0;
gc_list_init(&wrcb_to_call);
/* Clear all weakrefs to the objects in unreachable. If such a weakref
* also has a callback, move it into `wrcb_to_call` if the callback
* needs to be invoked. Note that we cannot invoke any callbacks until
* all weakrefs to unreachable objects are cleared, lest the callback
* resurrect an unreachable object via a still-active weakref. We
* make another pass over wrcb_to_call, invoking callbacks, after this
* pass completes.
*/
for (gc = unreachable->gc.gc_next; gc != unreachable; gc = next) {
PyWeakReference **wrlist;
op = FROM_GC(gc);
assert(IS_TENTATIVELY_UNREACHABLE(op));
next = gc->gc.gc_next;
if (! PyType_SUPPORTS_WEAKREFS(op->ob_type))
continue;
/* It supports weakrefs. Does it have any? */
wrlist = (PyWeakReference **)
PyObject_GET_WEAKREFS_LISTPTR(op);
/* `op` may have some weakrefs. March over the list, clear
* all the weakrefs, and move the weakrefs with callbacks
* that must be called into wrcb_to_call.
*/
for (wr = *wrlist; wr != NULL; wr = *wrlist) {
PyGC_Head *wrasgc; /* AS_GC(wr) */
/* _PyWeakref_ClearRef clears the weakref but leaves
* the callback pointer intact. Obscure: it also
* changes *wrlist.
*/
assert(wr->wr_object == op);
_PyWeakref_ClearRef(wr);
assert(wr->wr_object == Py_None);
if (wr->wr_callback == NULL)
continue; /* no callback */
/* Headache time. `op` is going away, and is weakly referenced by
* `wr`, which has a callback. Should the callback be invoked? If wr
* is also trash, no:
*
* 1. There's no need to call it. The object and the weakref are
* both going away, so it's legitimate to pretend the weakref is
* going away first. The user has to ensure a weakref outlives its
* referent if they want a guarantee that the wr callback will get
* invoked.
*
* 2. It may be catastrophic to call it. If the callback is also in
* cyclic trash (CT), then although the CT is unreachable from
* outside the current generation, CT may be reachable from the
* callback. Then the callback could resurrect insane objects.
*
* Since the callback is never needed and may be unsafe in this case,
* wr is simply left in the unreachable set. Note that because we
* already called _PyWeakref_ClearRef(wr), its callback will never
* trigger.
*
* OTOH, if wr isn't part of CT, we should invoke the callback: the
* weakref outlived the trash. Note that since wr isn't CT in this
* case, its callback can't be CT either -- wr acted as an external
* root to this generation, and therefore its callback did too. So
* nothing in CT is reachable from the callback either, so it's hard
* to imagine how calling it later could create a problem for us. wr
* is moved to wrcb_to_call in this case.
*/
if (IS_TENTATIVELY_UNREACHABLE(wr))
continue;
assert(IS_REACHABLE(wr));
/* Create a new reference so that wr can't go away
* before we can process it again.
*/
Py_INCREF(wr);
/* Move wr to wrcb_to_call, for the next pass. */
wrasgc = AS_GC(wr);
assert(wrasgc != next); /* wrasgc is reachable, but
next isn't, so they can't
be the same */
gc_list_move(wrasgc, &wrcb_to_call);
}
}
/* Invoke the callbacks we decided to honor. It's safe to invoke them
* because they can't reference unreachable objects.
*/
while (! gc_list_is_empty(&wrcb_to_call)) {
PyObject *temp;
PyObject *callback;
gc = wrcb_to_call.gc.gc_next;
op = FROM_GC(gc);
assert(IS_REACHABLE(op));
assert(PyWeakref_Check(op));
wr = (PyWeakReference *)op;
callback = wr->wr_callback;
assert(callback != NULL);
/* copy-paste of weakrefobject.c's handle_callback() */
temp = PyObject_CallFunction(callback, "O", wr);
if (temp == NULL)
PyErr_WriteUnraisable(callback);
else
Py_DECREF(temp);
/* Give up the reference we created in the first pass. When
* op's refcount hits 0 (which it may or may not do right now),
* op's tp_dealloc will decref op->wr_callback too. Note
* that the refcount probably will hit 0 now, and because this
* weakref was reachable to begin with, gc didn't already
* add it to its count of freed objects. Example: a reachable
* weak value dict maps some key to this reachable weakref.
* The callback removes this key->weakref mapping from the
* dict, leaving no other references to the weakref (excepting
* ours).
*/
Py_DECREF(op);
if (wrcb_to_call.gc.gc_next == gc) {
/* object is still alive -- move it */
gc_list_move(gc, old);
}
else
++num_freed;
}
return num_freed;
}
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
struct device_node *np = pdev->dev.of_node;
struct s3c2410_ts_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = NULL;
struct resource *mem;
bool has_ts = false;
int ret = -ENODEV;
int irq;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct exynos_adc));
if (!indio_dev) {
dev_err(&pdev->dev, "failed allocating iio device\n");
return -ENOMEM;
}
info = iio_priv(indio_dev);
info->data = exynos_adc_get_data(pdev);
if (!info->data) {
dev_err(&pdev->dev, "failed getting exynos_adc_data\n");
return -EINVAL;
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
info->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
if (info->data->needs_adc_phy) {
info->pmu_map = syscon_regmap_lookup_by_phandle(
pdev->dev.of_node,
"samsung,syscon-phandle");
if (IS_ERR(info->pmu_map)) {
dev_err(&pdev->dev, "syscon regmap lookup failed.\n");
return PTR_ERR(info->pmu_map);
}
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "no irq resource?\n");
return irq;
}
info->irq = irq;
irq = platform_get_irq(pdev, 1);
if (irq == -EPROBE_DEFER)
return irq;
info->tsirq = irq;
info->dev = &pdev->dev;
init_completion(&info->completion);
info->clk = devm_clk_get(&pdev->dev, "adc");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
return PTR_ERR(info->clk);
}
if (info->data->needs_sclk) {
info->sclk = devm_clk_get(&pdev->dev, "sclk");
if (IS_ERR(info->sclk)) {
dev_err(&pdev->dev,
"failed getting sclk clock, err = %ld\n",
PTR_ERR(info->sclk));
return PTR_ERR(info->sclk);
}
}
info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) {
dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
PTR_ERR(info->vdd));
return PTR_ERR(info->vdd);
}
ret = regulator_enable(info->vdd);
if (ret)
return ret;
ret = exynos_adc_prepare_clk(info);
if (ret)
goto err_disable_reg;
ret = exynos_adc_enable_clk(info);
if (ret)
goto err_unprepare_clk;
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->dev.parent = &pdev->dev;
indio_dev->dev.of_node = pdev->dev.of_node;
indio_dev->info = &exynos_adc_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = exynos_adc_iio_channels;
indio_dev->num_channels = info->data->num_channels;
ret = request_irq(info->irq, exynos_adc_isr,
0, dev_name(&pdev->dev), info);
if (ret < 0) {
dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
info->irq);
goto err_disable_clk;
}
ret = iio_device_register(indio_dev);
if (ret)
goto err_irq;
if (info->data->init_hw)
info->data->init_hw(info);
/* leave out any TS related code if unreachable */
if (IS_REACHABLE(CONFIG_INPUT)) {
has_ts = of_property_read_bool(pdev->dev.of_node,
"has-touchscreen") || pdata;
}
if (pdata)
info->delay = pdata->delay;
else
info->delay = 10000;
if (has_ts)
ret = exynos_adc_ts_init(info);
if (ret)
goto err_iio;
ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
goto err_of_populate;
}
return 0;
err_of_populate:
device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
if (has_ts) {
input_unregister_device(info->input);
free_irq(info->tsirq, info);
}
err_iio:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
err_disable_clk:
if (info->data->exit_hw)
info->data->exit_hw(info);
exynos_adc_disable_clk(info);
err_unprepare_clk:
exynos_adc_unprepare_clk(info);
err_disable_reg:
regulator_disable(info->vdd);
return ret;
}
