int main(void)
{
int Status;
/*
* Run the example, specify the device ID that is generated in
* xparameters.h.
*/
Status = IicSelfTestExample(IIC_DEVICE_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
}
return XST_SUCCESS;
}
int main (void) {
static XIntc intc;
/*
* Enable and initialize cache
*/
#if XPAR_MICROBLAZE_0_USE_ICACHE
Xil_ICacheInvalidate();
Xil_ICacheEnable();
#endif
#if XPAR_MICROBLAZE_0_USE_DCACHE
Xil_DCacheInvalidate();
Xil_DCacheEnable();
#endif
static XLlTemac Hard_Ethernet_MAC_LlTemac;
static XLlDma Hard_Ethernet_MAC_LlDma;
/* Initialize RS232_Uart_1 - Set baudrate and number of stop bits */
XUartNs550_SetBaud(XPAR_RS232_UART_1_BASEADDR, XPAR_XUARTNS550_CLOCK_HZ, 9600);
XUartNs550_SetLineControlReg(XPAR_RS232_UART_1_BASEADDR, XUN_LCR_8_DATA_BITS);
static XUartNs550 RS232_Uart_2_UartNs550;
static XTmrCtr xps_timer_0_Timer;
print("-- Entering main() --\r\n");
{
int status;
print("\r\n Running IntcSelfTestExample() for xps_intc_0...\r\n");
status = IntcSelfTestExample(XPAR_XPS_INTC_0_DEVICE_ID);
if (status == 0) {
print("IntcSelfTestExample PASSED\r\n");
}
else {
print("IntcSelfTestExample FAILED\r\n");
}
}
{
int Status;
Status = IntcInterruptSetup(&intc, XPAR_XPS_INTC_0_DEVICE_ID);
if (Status == 0) {
print("Intc Interrupt Setup PASSED\r\n");
}
else {
print("Intc Interrupt Setup FAILED\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioOutputExample() for LEDs_8Bit...\r\n");
status = GpioOutputExample(XPAR_LEDS_8BIT_DEVICE_ID,8);
if (status == 0) {
print("GpioOutputExample PASSED.\r\n");
}
else {
print("GpioOutputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioOutputExample() for LEDs_Positions...\r\n");
status = GpioOutputExample(XPAR_LEDS_POSITIONS_DEVICE_ID,5);
if (status == 0) {
print("GpioOutputExample PASSED.\r\n");
}
else {
print("GpioOutputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioInputExample() for Push_Buttons_5Bit...\r\n");
u32 DataRead;
status = GpioInputExample(XPAR_PUSH_BUTTONS_5BIT_DEVICE_ID, &DataRead);
if (status == 0) {
xil_printf("GpioInputExample PASSED. Read data:0x%X\r\n", DataRead);
}
else {
print("GpioInputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioInputExample() for DIP_Switches_8Bit...\r\n");
u32 DataRead;
status = GpioInputExample(XPAR_DIP_SWITCHES_8BIT_DEVICE_ID, &DataRead);
if (status == 0) {
xil_printf("GpioInputExample PASSED. Read data:0x%X\r\n", DataRead);
}
else {
print("GpioInputExample FAILED.\r\n");
}
}
{
int status;
print("\r\n Running IicSelfTestExample() for IIC_EEPROM...\r\n");
status = IicSelfTestExample(XPAR_IIC_EEPROM_DEVICE_ID);
if (status == 0) {
print("IicSelfTestExample PASSED\r\n");
}
else {
print("IicSelfTestExample FAILED\r\n");
}
}
/* TemacPolledExample does not support SGDMA
{
XStatus status;
print("\r\n Running TemacPolledExample() for Hard_Ethernet_MAC...\r\n");
status = TemacPolledExample( XPAR_HARD_ETHERNET_MAC_CHAN_0_DEVICE_ID,
);
if (status == 0) {
print("TemacPolledExample PASSED\r\n");
}
else {
print("TemacPolledExample FAILED\r\n");
}
}
*/
{
XStatus Status;
print("\r\nRunning TemacSgDmaIntrExample() for Hard_Ethernet_MAC...\r\n");
Status = TemacSgDmaIntrExample(&intc, &Hard_Ethernet_MAC_LlTemac,
&Hard_Ethernet_MAC_LlDma,
XPAR_HARD_ETHERNET_MAC_CHAN_0_DEVICE_ID,
XPAR_XPS_INTC_0_HARD_ETHERNET_MAC_TEMACINTC0_IRPT_INTR,
XPAR_LLTEMAC_0_LLINK_CONNECTED_DMARX_INTR,
XPAR_LLTEMAC_0_LLINK_CONNECTED_DMATX_INTR);
if (Status == 0) {
print("Temac Interrupt Test PASSED.\r\n");
}
else {
print("Temac Interrupt Test FAILED.\r\n");
}
}
{
int status;
print("\r\nRunning SysAceSelfTestExample() for SysACE_CompactFlash...\r\n");
status = SysAceSelfTestExample(XPAR_SYSACE_COMPACTFLASH_DEVICE_ID);
if (status == 0) {
print("SysAceSelfTestExample PASSED\r\n");
}
else {
print("SysAceSelfTestExample FAILED\r\n");
}
}
/*
* Peripheral SelfTest will not be run for RS232_Uart_1
* because it has been selected as the STDOUT device
*/
{
XStatus status;
print("\r\nRunning UartNs550SelfTestExample() for RS232_Uart_2...\r\n");
status = UartNs550SelfTestExample(XPAR_RS232_UART_2_DEVICE_ID);
if (status == 0) {
print("UartNs550SelfTestExample PASSED\r\n");
}
else {
print("UartNs550SelfTestExample FAILED\r\n");
}
}
{
XStatus Status;
print("\r\n Running Interrupt Test for RS232_Uart_2...\r\n");
Status = UartNs550IntrExample(&intc, &RS232_Uart_2_UartNs550, \
XPAR_RS232_UART_2_DEVICE_ID, \
XPAR_XPS_INTC_0_RS232_UART_2_IP2INTC_IRPT_INTR);
if (Status == 0) {
print("UartNs550 Interrupt Test PASSED\r\n");
}
else {
print("UartNs550 Interrupt Test FAILED\r\n");
}
}
{
int status;
print("\r\n Running TmrCtrSelfTestExample() for xps_timer_0...\r\n");
status = TmrCtrSelfTestExample(XPAR_XPS_TIMER_0_DEVICE_ID, 0x0);
if (status == 0) {
print("TmrCtrSelfTestExample PASSED\r\n");
}
else {
print("TmrCtrSelfTestExample FAILED\r\n");
}
}
{
int Status;
print("\r\n Running Interrupt Test for xps_timer_0...\r\n");
Status = TmrCtrIntrExample(&intc, &xps_timer_0_Timer, \
XPAR_XPS_TIMER_0_DEVICE_ID, \
XPAR_XPS_INTC_0_XPS_TIMER_0_INTERRUPT_INTR, 0);
if (Status == 0) {
print("Timer Interrupt Test PASSED\r\n");
}
else {
print("Timer Interrupt Test FAILED\r\n");
}
}
{
int status;
print("\r\nRunning UartLiteSelfTestExample() for mdm_0...\r\n");
status = UartLiteSelfTestExample(XPAR_MDM_0_DEVICE_ID);
if (status == 0) {
print("UartLiteSelfTestExample PASSED\r\n");
}
else {
print("UartLiteSelfTestExample FAILED\r\n");
}
}
/*
* Disable cache and reinitialize it so that other
* applications can be run with no problems
*/
#if XPAR_MICROBLAZE_0_USE_DCACHE
Xil_DCacheDisable();
Xil_DCacheInvalidate();
#endif
#if XPAR_MICROBLAZE_0_USE_ICACHE
Xil_ICacheDisable();
Xil_ICacheInvalidate();
#endif
print("-- Exiting main() --\r\n");
return 0;
}
int main()
{
static XIntc intc;
Xil_ICacheEnable();
Xil_DCacheEnable();
print("---Entering main---\n\r");
{
int status;
print("\r\n Running IntcSelfTestExample() for xps_intc_0...\r\n");
status = IntcSelfTestExample(XPAR_XPS_INTC_0_DEVICE_ID);
if (status == 0) {
print("IntcSelfTestExample PASSED\r\n");
}
else {
print("IntcSelfTestExample FAILED\r\n");
}
}
{
int Status;
Status = IntcInterruptSetup(&intc, XPAR_XPS_INTC_0_DEVICE_ID);
if (Status == 0) {
print("Intc Interrupt Setup PASSED\r\n");
}
else {
print("Intc Interrupt Setup FAILED\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioInputExample() for dip_switches_8bit...\r\n");
u32 DataRead;
status = GpioInputExample(XPAR_DIP_SWITCHES_8BIT_DEVICE_ID, &DataRead);
if (status == 0) {
xil_printf("GpioInputExample PASSED. Read data:0x%X\r\n", DataRead);
}
else {
print("GpioInputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioOutputExample() for leds_8bit...\r\n");
status = GpioOutputExample(XPAR_LEDS_8BIT_DEVICE_ID,8);
if (status == 0) {
print("GpioOutputExample PASSED.\r\n");
}
else {
print("GpioOutputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioOutputExample() for leds_positions...\r\n");
status = GpioOutputExample(XPAR_LEDS_POSITIONS_DEVICE_ID,5);
if (status == 0) {
print("GpioOutputExample PASSED.\r\n");
}
else {
print("GpioOutputExample FAILED.\r\n");
}
}
{
u32 status;
print("\r\nRunning GpioInputExample() for push_buttons_5bit...\r\n");
u32 DataRead;
status = GpioInputExample(XPAR_PUSH_BUTTONS_5BIT_DEVICE_ID, &DataRead);
if (status == 0) {
xil_printf("GpioInputExample PASSED. Read data:0x%X\r\n", DataRead);
}
else {
print("GpioInputExample FAILED.\r\n");
}
}
{
int status;
print("\r\nRunning EmacLitePolledExample() for ethernet_mac...\r\n");
status = EmacLitePolledExample(XPAR_ETHERNET_MAC_DEVICE_ID);
if (status == 0) {
print("EmacLite Polled Example PASSED\r\n");
}
else {
print("EmacLite Polled Example FAILED\r\n");
}
}
{
int status;
print("\r\n Running IicSelfTestExample() for iic_eeprom...\r\n");
status = IicSelfTestExample(XPAR_IIC_EEPROM_DEVICE_ID);
if (status == 0) {
print("IicSelfTestExample PASSED\r\n");
}
else {
print("IicSelfTestExample FAILED\r\n");
}
}
{
int status;
print("\r\nRunning UartLiteSelfTestExample() for mdm_0...\r\n");
status = UartLiteSelfTestExample(XPAR_MDM_0_DEVICE_ID);
if (status == 0) {
print("UartLiteSelfTestExample PASSED\r\n");
}
else {
print("UartLiteSelfTestExample FAILED\r\n");
}
}
/*
* Peripheral SelfTest will not be run for rs232_uart_1
* because it has been selected as the STDOUT device
*/
{
int status;
print("\r\nRunning UartLiteSelfTestExample() for rs232_uart_2...\r\n");
status = UartLiteSelfTestExample(XPAR_RS232_UART_2_DEVICE_ID);
if (status == 0) {
print("UartLiteSelfTestExample PASSED\r\n");
}
else {
print("UartLiteSelfTestExample FAILED\r\n");
}
}
{
XStatus status;
print("\r\n Running PCIeTestAppExample for pcie_bridge...\r\n");
status = PCIeTestAppExample(XPAR_PCIE_BRIDGE_DEVICE_ID);
if (status == 0) {
print("PCIeTestAppExample PASSED\r\n");
}
else {
print("PCIeTestAppExample FAILED\r\n");
}
}
{
int status;
print("\r\nRunning SysAceSelfTestExample() for sysace_compactflash...\r\n");
status = SysAceSelfTestExample(XPAR_SYSACE_COMPACTFLASH_DEVICE_ID);
if (status == 0) {
print("SysAceSelfTestExample PASSED\r\n");
}
else {
print("SysAceSelfTestExample FAILED\r\n");
}
}
print("---Exiting main---\n\r");
Xil_DCacheDisable();
Xil_ICacheDisable();
return 0;
}
