/*
* Kernel C code entry point.
* Initializes kernel subsystems, mounts filesystems,
* and spawns init process.
*/
void Main(struct Boot_Info* bootInfo)
{
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
Init_TSS();
Init_Interrupts();
Init_Scheduler();
Init_Traps();
Init_Timer();
Init_Keyboard();
Init_DMA();
Init_Floppy();
Init_IDE();
Init_PFAT();
Mount_Root_Filesystem();
Set_Current_Attr(ATTRIB(BLACK, GREEN|BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
Spawn_Init_Process();
/* Now this thread is done. */
Exit(0);
}
void main(void)
{
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Init_Interrupts();
TimeMsec = RESET_TIME;
Init_Timers(); // Initialize Timers
Init_LCD(); // Initialize LCD
// "0123456789abcdef"
display_1 = " Homework 9 ";
display_2 = " ";
Display_Process();
/* ---------- Begining of the "While" Operating System ------------- */
while(ALWAYS) // Can the Operating system run
{
ADC_Process();
Control_Process();
Menu_Process();
if(TimeMsec % EVERY_50 == RESET_TIME)
{
Display_Process();
}
}
}
/*
* Kernel C code entry point.
* Initializes kernel subsystems, mounts filesystems,
* and spawns init process.
*/
void Main(struct Boot_Info* bootInfo)
{
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
Init_TSS();
Init_Interrupts();
Init_Scheduler();
Init_Traps();
Init_Timer();
Init_Keyboard();
Set_Current_Attr(ATTRIB(BLACK, GREEN|BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
/* TODO("Start a kernel thread to echo pressed keys and print counts");*/
Start_Kernel_Thread(&funct_eigen, 0, PRIORITY_NORMAL, false);
/* Now this thread is done. */
Exit(0);
}
void Main(struct Boot_Info *bootInfo) {
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
Init_TSS();
lockKernel();
Init_Interrupts(0);
Init_SMP();
TODO_P(PROJECT_VIRTUAL_MEMORY_A,
"initialize virtual memory page tables.");
Init_Scheduler(0, (void *)KERN_STACK);
Init_Traps();
Init_Local_APIC(0);
Init_Timer();
Init_Keyboard();
Init_DMA();
/* Init_Floppy(); *//* floppy initialization hangs on virtualbox */
Init_IDE();
Init_PFAT();
Init_GFS2();
Init_GOSFS();
Init_CFS();
Init_Alarm();
Release_SMP();
/* Initialize Networking */
Init_Network_Devices();
Init_ARP_Protocol();
Init_IP();
Init_Routing();
Init_Sockets();
Init_RIP();
/* End networking subsystem init */
/* Initialize Sound */
Init_Sound_Devices();
/* End sound init */
Mount_Root_Filesystem();
TODO_P(PROJECT_VIRTUAL_MEMORY_A, "initialize page file.");
Set_Current_Attr(ATTRIB(BLACK, GREEN | BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
TODO_P(PROJECT_SOUND, "play startup sound");
Spawn_Init_Process();
/* it's time to shutdown the system */
Hardware_Shutdown();
/* we should not get here */
}
//--------------------------------------------------------------------------//
// Function: main //
//--------------------------------------------------------------------------//
void main(void)
{
Init_Flags();
Init_Timers();
Init_Interrupts();
while(1);
}
//--------------------------------------------------------------------------//
// Function: main //
//--------------------------------------------------------------------------//
int main(void)
{
Init_Flags();
Init_Timers();
Init_Interrupts();
while(1);
return 0;
}
//--------------------------------------------------------------------------//
// Function: main //
// //
// Description: After calling a few initalization routines, main() just //
// waits in a loop forever. The code to process the incoming //
// data can be placed in the function Process_Data() in the //
// file "Process_Data.c". //
//--------------------------------------------------------------------------//
void main(void)
{
Init_Flags();
Audio_Reset();
Init_Sport0();
Init_DMA();
Init_Interrupts();
Enable_DMA_Sport0();
while(1);
}
int Init (void)
{
Init_Oscillator();
Init_I2C();
Init_Interrupts();
Init_USART();
TRISB = 0x00;
//LATB = 0x01; // Turn on a little status LED;
return 1;
}
//--------------------------------------------------------------------------//
// Function: main //
//--------------------------------------------------------------------------//
void main(void)
{
int c;
//inicjalizacje
Init_Interrupts();
LED_Init();
UART_initialize(115200);
//jakiœ tam komunikat powitalny
UART_putc('H');
UART_putc('e');
UART_putc('l');
UART_putc('l');
UART_putc('o');
for (;;)
{
//odbieramy znak i odbijamy go na terminal
c = UART_getc();
UART_putc(c);
//w zale¿noœci od tego co przysz³o, prze³¹czamy stan jednej z diod
switch (c)
{
case '1':
*pPORTFIO_TOGGLE = 0x0040;
break;
case '2':
*pPORTFIO_TOGGLE = 0x0080;
break;
case '3':
*pPORTFIO_TOGGLE = 0x0100;
break;
case '4':
*pPORTFIO_TOGGLE = 0x0200;
break;
case '5':
*pPORTFIO_TOGGLE = 0x0400;
break;
case '6':
*pPORTFIO_TOGGLE = 0x0800;
break;
}
}
}
/*
* Kernel C code entry point.
* Initializes kernel subsystems, mounts filesystems,
* and spawns init process.
*/
void Main(struct Boot_Info *bootInfo) {
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
Init_TSS();
Init_Interrupts();
Init_Scheduler();
Init_Traps();
Init_Timer();
Init_Keyboard();
Init_DMA();
Init_Floppy();
Init_IDE();
Init_PFAT();
Init_GFS2();
Init_GOSFS();
Init_Alarm();
/* Initialize Networking */
Init_Network_Devices();
Init_ARP_Protocol();
Init_IP();
Init_Routing();
Init_Sockets();
Init_RIP();
/* End networking subsystem init */
Mount_Root_Filesystem();
Set_Current_Attr(ATTRIB(BLACK, GREEN | BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
Spawn_Init_Process();
/* Now this thread is done. */
Exit(0);
}
/*
* Kernel C code entry point.
* Initializes kernel subsystems, mounts filesystems,
* and spawns init process.
*/
void Main(struct Boot_Info* bootInfo)
{
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
Init_TSS();
Init_Interrupts();
Init_Scheduler();
Init_Traps();
Init_Timer();
Init_Keyboard();
Set_Current_Attr(ATTRIB(BLACK, GREEN|BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
Start_Kernel_Thread(Print_Key_Pressed, 0, PRIORITY_NORMAL, false);
/* Now this thread is done. */
Exit(0);
}
void main(void)
{
Init_Ports(); // Initialize Ports
Init_Clocks(); // Initialize Clock System
Init_Conditions();
Init_Interrupts();
//PJOUT |= LED1; // Turn LED 1 on to indicate boot
TimeMsec = RESET_TIME;
Init_Timers(); // Initialize Timers
Init_LCD(); // Initialize LCD
//Init_LEDs(); // Initialize LEDs
// "0123456789abcdef"
display_1 = " PROJECT 5 ";
display_2 = " ";
Display_Process();
P1OUT |= IR_LED;
waitMsec(10);
/* ---------- Begining of the "While" Operating System ------------- */
while(ALWAYS) // Can the Operating system run
{
if(TimeMsec % EVERY_50 == RESET_TIME)
Display_Process(); //Refreshes screen every 50 'ticks'
if(TimeMsec % EVERY_2 == RESET_TIME)
{
Switches_Process(); // Poll for switch state change every other 'tick'
ADC_Process();
}
Motors_Process();
Control_Process();
}
}
void Main(struct Boot_Info *bootInfo) {
Init_BSS();
Init_Screen();
Init_Mem(bootInfo);
Init_CRC32();
TODO_P(PROJECT_PERCPU, "Initialize PERCPU");
Init_TSS();
/* by modifying begin_int_atomic to autolock if not locked when interrupts are disabled,
this lockKernel() became duplicative */
/* lockKernel(); */
Init_Interrupts(0);
Print("Init_SMP\n");
Init_SMP();
Print("/Init_SMP\n");
TODO_P(PROJECT_VIRTUAL_MEMORY_A,
"initialize virtual memory page tables.");
Init_Scheduler(0, (void *)KERN_STACK);
Init_Traps();
Init_Local_APIC(0);
Init_Timer();
Init_Keyboard();
Init_DMA();
/* Init_Floppy(); *//* floppy initialization hangs on virtualbox */
Init_IDE();
Init_PFAT();
if(Init_GFS2)
Init_GFS2();
if(Init_GFS3)
Init_GFS3();
Init_GOSFS();
Init_CFS();
Init_Alarm();
Init_Serial();
Print("the global lock is %sheld.\n",
Kernel_Is_Locked()? "" : "not ");
Release_SMP();
/* Initialize Networking */
/*
Init_Network_Devices();
Init_ARP_Protocol();
Init_IP();
Init_Routing();
Init_Sockets();
Init_RIP();
*/
/* End networking subsystem init */
/* Initialize Sound */
Init_Sound_Devices();
/* End sound init */
Mount_Root_Filesystem();
TODO_P(PROJECT_VIRTUAL_MEMORY_A, "initialize page file.");
Set_Current_Attr(ATTRIB(BLACK, GREEN | BRIGHT));
Print("Welcome to GeekOS!\n");
Set_Current_Attr(ATTRIB(BLACK, GRAY));
TODO_P(PROJECT_SOUND, "play startup sound");
TODO_P(PROJECT_SERIAL,
"Initialize the serial console and start the shell.");
Spawn_Init_Process();
/* it's time to shutdown the system because Init exited. */
Hardware_Shutdown();
/* we should not get here */
}
