Ejemplo n.º 1
0
// Return true if a friend is between us and the given position
bool CHostageImprov::__MAKE_VHOOK(IsFriendInTheWay)(const Vector &goalPos) const
{
	// do this check less often to ease CPU burden
	if (!m_avoidFriendTimer.IsElapsed())
	{
		return m_isFriendInTheWay;
	}

	const float avoidFriendInterval = 0.5f;
	m_avoidFriendTimer.Start(avoidFriendInterval);

	CheckWayFunctor check(this, goalPos);

	if (g_pHostages != NULL)
	{
		g_pHostages->ForEachHostage(check);

		if (check.m_blocker != NULL)
		{
			return m_isFriendInTheWay = true;
		}
	}

	// check if any CT are overlapping this linear path
	for (int i = 1; i <= gpGlobals->maxClients; ++i)
	{
		CBasePlayer *player = static_cast<CBasePlayer *>(UTIL_PlayerByIndex(i));

		if (player == NULL)
			continue;

		if (FNullEnt(player->pev))
			continue;

		if (!player->IsAlive() || player->m_iTeam == TERRORIST)
			continue;

		if (IsFriendInTheWay(player, goalPos))
		{
			m_isFriendInTheWay = true;
			break;
		}
	}

	return m_isFriendInTheWay;
}
Ejemplo n.º 2
0
// Move along the path. Return false if end of path reached.
CCSBot::PathResult CCSBot::UpdatePathMovement(bool allowSpeedChange)
{
	if (m_pathLength == 0)
		return PATH_FAILURE;

	if (cv_bot_walk.value != 0.0f)
		Walk();

	// If we are navigating a ladder, it overrides all other path movement until complete
	if (UpdateLadderMovement())
		return PROGRESSING;

	// ladder failure can destroy the path
	if (m_pathLength == 0)
		return PATH_FAILURE;

	// we are not supposed to be on a ladder - if we are, jump off
	if (IsOnLadder())
		Jump(MUST_JUMP);

	assert(m_pathIndex < m_pathLength);

	// Check if reached the end of the path
	bool nearEndOfPath = false;
	if (m_pathIndex >= m_pathLength - 1)
	{
		Vector toEnd(pev->origin.x, pev->origin.y, GetFeetZ());
		Vector d = GetPathEndpoint() - toEnd; // can't use 2D because path end may be below us (jump down)

		const float walkRange = 200.0f;

		// walk as we get close to the goal position to ensure we hit it
		if (d.IsLengthLessThan(walkRange))
		{
			// don't walk if crouching - too slow
			if (allowSpeedChange && !IsCrouching())
				Walk();

			// note if we are near the end of the path
			const float nearEndRange = 50.0f;
			if (d.IsLengthLessThan(nearEndRange))
				nearEndOfPath = true;

			const float closeEpsilon = 20.0f;
			if (d.IsLengthLessThan(closeEpsilon))
			{
				// reached goal position - path complete
				DestroyPath();

				// TODO: We should push and pop walk state here, in case we want to continue walking after reaching goal
				if (allowSpeedChange)
					Run();

				return END_OF_PATH;
			}
		}
	}

	// To keep us moving smoothly, we will move towards
	// a point farther ahead of us down our path.
	int prevIndex = 0;				// closest index on path just prior to where we are now
	const float aheadRange = 300.0f;
	int newIndex = FindPathPoint(aheadRange, &m_goalPosition, &prevIndex);

	// BOTPORT: Why is prevIndex sometimes -1?
	if (prevIndex < 0)
		prevIndex = 0;

	// if goal position is near to us, we must be about to go around a corner - so look ahead!
	const float nearCornerRange = 100.0f;
	if (m_pathIndex < m_pathLength - 1 && (m_goalPosition - pev->origin).IsLengthLessThan(nearCornerRange))
	{
		ClearLookAt();
		InhibitLookAround(0.5f);
	}

	// if we moved to a new node on the path, setup movement
	if (newIndex > m_pathIndex)
	{
		SetPathIndex(newIndex);
	}

	if (!IsUsingLadder())
	{
		// Crouching

		// if we are approaching a crouch area, crouch
		// if there are no crouch areas coming up, stand
		const float crouchRange = 50.0f;
		bool didCrouch = false;
		for (int i = prevIndex; i < m_pathLength; i++)
		{
			const CNavArea *to = m_path[i].area;

			// if there is a jump area on the way to the crouch area, don't crouch as it messes up the jump
			// unless we are already higher than the jump area - we must've jumped already but not moved into next area
			if ((to->GetAttributes() & NAV_JUMP)/* && to->GetCenter()->z > GetFeetZ()*/)
				break;

			Vector close;
			to->GetClosestPointOnArea(&pev->origin, &close);

			if ((close - pev->origin).Make2D().IsLengthGreaterThan(crouchRange))
				break;

			if (to->GetAttributes() & NAV_CROUCH)
			{
				Crouch();
				didCrouch = true;
				break;
			}
		}

		if (!didCrouch && !IsJumping())
		{
			// no crouch areas coming up
			StandUp();
		}
		// end crouching logic
	}

	// compute our forward facing angle
	m_forwardAngle = UTIL_VecToYaw(m_goalPosition - pev->origin);

	// Look farther down the path to "lead" our view around corners
	Vector toGoal;

	if (m_pathIndex == 0)
	{
		toGoal = m_path[1].pos;
	}
	else if (m_pathIndex < m_pathLength)
	{
		toGoal = m_path[m_pathIndex].pos - pev->origin;

		// actually aim our view farther down the path
		const float lookAheadRange = 500.0f;
		if (!m_path[m_pathIndex].ladder && !IsNearJump() && toGoal.Make2D().IsLengthLessThan(lookAheadRange))
		{
			float along = toGoal.Length2D();
			int i;
			for (i = m_pathIndex + 1; i < m_pathLength; i++)
			{
				Vector delta = m_path[i].pos - m_path[i - 1].pos;
				float segmentLength = delta.Length2D();

				if (along + segmentLength >= lookAheadRange)
				{
					// interpolate between points to keep look ahead point at fixed distance
					float t = (lookAheadRange - along) / (segmentLength + along);
					Vector target;

					if (t <= 0.0f)
						target = m_path[i - 1].pos;
					else if (t >= 1.0f)
						target = m_path[i].pos;
					else
						target = m_path[i - 1].pos + t * delta;

					toGoal = target - pev->origin;
					break;
				}

				// if we are coming up to a ladder or a jump, look at it
				if (m_path[i].ladder || (m_path[i].area->GetAttributes() & NAV_JUMP))
				{
					toGoal = m_path[i].pos - pev->origin;
					break;
				}

				along += segmentLength;
			}

			if (i == m_pathLength)
			{
				toGoal = GetPathEndpoint() - pev->origin;
			}
		}
	}
	else
	{
		toGoal = GetPathEndpoint() - pev->origin;
	}

	m_lookAheadAngle = UTIL_VecToYaw(toGoal);

	// initialize "adjusted" goal to current goal
	Vector adjustedGoal = m_goalPosition;

	// Use short "feelers" to veer away from close-range obstacles
	// Feelers come from our ankles, just above StepHeight, so we avoid short walls, too
	// Don't use feelers if very near the end of the path, or about to jump
	// TODO: Consider having feelers at several heights to deal with overhangs, etc.
	if (!nearEndOfPath && !IsNearJump() && !IsJumping())
	{
		FeelerReflexAdjustment(&adjustedGoal);
	}

	// draw debug visualization
	if ((cv_bot_traceview.value == 1.0f && IsLocalPlayerWatchingMe()) || cv_bot_traceview.value == 10.0f)
	{
		DrawPath();

		const Vector *pos = &m_path[m_pathIndex].pos;
		UTIL_DrawBeamPoints(*pos, *pos + Vector(0, 0, 50), 1, 255, 255, 0);
		UTIL_DrawBeamPoints(adjustedGoal, adjustedGoal + Vector(0, 0, 50), 1, 255, 0, 255);
		UTIL_DrawBeamPoints(pev->origin, adjustedGoal + Vector(0, 0, 50), 1, 255, 0, 255);
	}

	// dont use adjustedGoal, as it can vary wildly from the feeler adjustment
	if (!IsAttacking() && IsFriendInTheWay(&m_goalPosition))
	{
		if (!m_isWaitingBehindFriend)
		{
			m_isWaitingBehindFriend = true;

			const float politeDuration = 5.0f - 3.0f * GetProfile()->GetAggression();
			m_politeTimer.Start(politeDuration);
		}
		else if (m_politeTimer.IsElapsed())
		{
			// we have run out of patience
			m_isWaitingBehindFriend = false;
			ResetStuckMonitor();

			// repath to avoid clump of friends in the way
			DestroyPath();
		}
	}
	else if (m_isWaitingBehindFriend)
	{
		// we're done waiting for our friend to move
		m_isWaitingBehindFriend = false;
		ResetStuckMonitor();
	}

	// Move along our path if there are no friends blocking our way,
	// or we have run out of patience
	if (!m_isWaitingBehindFriend || m_politeTimer.IsElapsed())
	{
		// Move along path
		MoveTowardsPosition(&adjustedGoal);

		// Stuck check
		if (m_isStuck && !IsJumping())
		{
			Wiggle();
		}
	}

	// if our goal is high above us, we must have fallen
	bool didFall = false;
	if (m_goalPosition.z - GetFeetZ() > JumpCrouchHeight)
	{
		const float closeRange = 75.0f;
		Vector2D to(pev->origin.x - m_goalPosition.x, pev->origin.y - m_goalPosition.y);
		if (to.IsLengthLessThan(closeRange))
		{
			// we can't reach the goal position
			// check if we can reach the next node, in case this was a "jump down" situation
			if (m_pathIndex < m_pathLength - 1)
			{
				if (m_path[m_pathIndex + 1].pos.z - GetFeetZ() > JumpCrouchHeight)
				{
					// the next node is too high, too - we really did fall of the path
					didFall = true;
				}
			}
			else
			{
				// fell trying to get to the last node in the path
				didFall = true;
			}
		}
	}

	// This timeout check is needed if the bot somehow slips way off
	// of its path and cannot progress, but also moves around
	// enough that it never becomes "stuck"
	const float giveUpDuration = 5.0f; // 4.0f
	if (didFall || gpGlobals->time - m_areaEnteredTimestamp > giveUpDuration)
	{
		if (didFall)
		{
			PrintIfWatched("I fell off!\n");
		}

		// if we havent made any progress in a long time, give up
		if (m_pathIndex < m_pathLength - 1)
		{
			PrintIfWatched("Giving up trying to get to area #%d\n", m_path[m_pathIndex].area->GetID());
		}
		else
		{
			PrintIfWatched("Giving up trying to get to end of path\n");
		}

		Run();
		StandUp();
		DestroyPath();

		return PATH_FAILURE;
	}

	return PROGRESSING;
}