/*******************************************************************************
* Function Name: LCD_Char_1_PrintInt8
********************************************************************************
*
* Summary:
* Print a byte as two ASCII characters.
*
* Parameters:
* value: The byte to be printed out as ASCII characters.
*
* Return:
* None.
*
*******************************************************************************/
void LCD_Char_1_PrintInt8(uint8 value)
{
static char8 const CYCODE LCD_Char_1_hex[16u] = "0123456789ABCDEF";
LCD_Char_1_PutChar((char8) LCD_Char_1_hex[value >> LCD_Char_1_BYTE_UPPER_NIBBLE_SHIFT]);
LCD_Char_1_PutChar((char8) LCD_Char_1_hex[value & LCD_Char_1_BYTE_LOWER_NIBBLE_MASK]);
}
int main()
{
uint8 ch; /* Data sent on the serial port */
uint8 count = 0u; /* Initializing the count value */
uint8 pos = 0u;
CyGlobalIntEnable;
isr_1_Start(); /* Initializing the ISR */
UART_1_Start(); /* Enabling the UART */
LCD_Char_1_Start(); /* Enabling the LCD */
for(ch = START_CHAR_VALUE; ch <= END_CHAR_VALUE; ch++)
{
UART_1_WriteTxData(ch); /* Sending the data */
count++;
if(count % LCD_NUM_COLUMNS == 0u) /* If the count value reaches the count 16 start from first location */
{
pos = 0u; /* resets the count value */
LCD_Char_1_WriteControl(LCD_Char_1_CLEAR_DISPLAY); /* Display will be cleared when reached count value 16 */
}
LCD_Char_1_Position(0u, pos++); /* LCD position to the count++ */
LCD_Char_1_PutChar(ch); /* print the value in the LCD */
LCD_Char_1_Position(1u, 0u);
LCD_Char_1_PrintInt8(count); /* prints the count in the LCD */
CyDelay(200u);
}
for(;;) {}
}
/*******************************************************************************
* 显示数据到显示屏
********************************************************************************/
void updateDisplay (uint16 tempture)
{
//LCD_Char_1_ClearDisplay();//清除显示
LCD_Char_1_PrintString("Tempture:");/* 打印提示信息 */
LCD_Char_1_Position(0,9); /* 把光标移动到1行，10列 */
LCD_Char_1_PrintNumber(tempture/10); /* 打印小数点前面的数据 */
LCD_Char_1_PutChar('.');
LCD_Char_1_PrintNumber(tempture%10); /* 打印小数点后面的数据 */
LCD_Char_1_PrintString(" ");
//LCD_Char_1_PutChar(LCD_Char_1_CUSTOM_7);
LCD_Char_1_PrintString("C");
}
/*******************************************************************************
* Function Name: main
********************************************************************************
*
* Summary:
* Main function performs following functions:
* 1: Initializes the LCD
* 2: Get the temperature of the Die
* 3: Print the Die Temperature value in LCD
* 4: Print the Status value in the LCD
*
* Parameters:
* None.
*
* Return:
* None.
*
*******************************************************************************/
int main()
{
cystatus Status;
int16 temperature;
/* Initializing the LCD */
LCD_Char_1_Start();
while(1)
{
/* Providing some delay */
CyDelay(50);
/* Reading the Die Temperature value */
Status = DieTemp_1_GetTemp(&temperature);
/* Displaying the Die Temperature value on the LCD */
LCD_Char_1_Position(0u, 0u);
LCD_Char_1_PrintString("Temp = ");
if (temperature >= 0)
{
LCD_Char_1_PrintString("+");
}
else
{
/* If the temperature value is negative, display "-" sign and make value positive */
LCD_Char_1_PrintString("-");
temperature = (uint16)(~temperature + 1u);
}
LCD_Char_1_PrintNumber((uint16) (temperature));
LCD_Char_1_PrintString(" ");
LCD_Char_1_PutChar(LCD_Char_1_CUSTOM_7);
LCD_Char_1_PrintString("C");
/* Displaying the status value on the LCD */
LCD_Char_1_Position(1u, 0u);
LCD_Char_1_PrintString("Status = ");
LCD_Char_1_PrintInt8((uint8) Status);
}
}
int main()
{
init();
while(1)
{
//LCD_Char_1_PrintNumber(RxSize);
if(RxSize>4)//来自PC的数据，应该进行解析
{
int i = 0;
//LCD_Char_1_PrintNumber(RxSize);
if(RxBuffer[RxSize-1] == 'e' && RxBuffer[0] == 's')
{
uint8 config = 0;
switch(RxBuffer[3])//获取针对节点的信息
{
case 'a' :
{
config += 3;
break;
}
case '0' :
{
config += 0;
break;
}
case '1' :
{
config += 1;
break;
}
case '2' :
{
config += 2;
break;
}
default :
{
config = 20;
break;
}
}
switch(RxBuffer[1])
{
case 'c' : //设置节点
{
if(RxBuffer[2] == 'o')//打开
{
;
}
else if(RxBuffer[2] == 'c')//关闭
{
config += 10;
}
configNode(config);
break;
}
case 's' :
{
if(RxBuffer[2] == 'h')//打开
{
;
}
else if(RxBuffer[2] == 'l')//关闭
{
config += 10;
}
setNode(config);
break;
}
case 'p' :
{
setPeriod(config);
break;
}
default :
{
break;
}
}
for(i = 0; i < RxSize; ++i)//处理完 清指令队列
{
RxBuffer[RxSize] = '\0';
}
RxSize = 0;
}
else if(RxBuffer[RxSize-1] == 'e' && RxBuffer[0] != 's')//指令出错
{
LCD_Char_1_PrintString("e0");
for(i = 0; i < RxSize; ++i)//错误指令 清指令队列
{
RxBuffer[RxSize] = '\0';
}
RxSize = 0;
}
else if(RxSize > 10)
{
LCD_Char_1_PrintString("c0");
for(i = 0; i < RxSize; ++i)//错误指令 清指令队列
{
RxBuffer[i] = '\0';
}
RxSize = 0;
}
}
if(Rx_1_Size > 2)//来自结点1的数据，应该转发给电脑
{
uint8 i = 0;
if(Rx_1_Buffer[Rx_1_Size-1] == 'e' && Rx_1_Buffer[0] == 's')
{
LCD_Char_1_PrintString(Rx_1_Buffer);
if(Rx_1_Buffer[1] == 't') //转发温度，加上节点号
{
char tem[9];
tem[0] = 's';
tem[1] = 't';
tem[2] = '1';//节点号
tem[3] = Rx_1_Buffer[2];
tem[4] = Rx_1_Buffer[3];
tem[5] = Rx_1_Buffer[4];
tem[6] = 'e';
tem[7] = '\0';
UART_PutString(tem);
}
else if(Rx_1_Buffer[1] == 'h') //转发温度过高
{
LCD_Char_1_PutChar('l');
UART_PutString("sh1he");
}
else if(Rx_1_Buffer[1] == 'l') //转发温度过低
{
UART_PutString("sh1le");
}
for(i = 0; i < Rx_1_Size; ++i)//处理完 清指令队列
{
Rx_1_Buffer[i] = '\0';
}
Rx_1_Size = 0;
}
else if(Rx_1_Buffer[Rx_1_Size-1] == 'e' && Rx_1_Buffer[0] != 's')//指令出错
{
LCD_Char_1_PrintString("e");
for(i = 0; i < Rx_1_Size; ++i)//错误指令 清指令队列
{
Rx_1_Buffer[i] = '\0';
}
Rx_1_Size = 0;
}
else if(Rx_1_Size > 10)
{
LCD_Char_1_PrintString("c");
for(i = 0; i < Rx_1_Size; ++i)//错误指令 清指令队列
{
Rx_1_Buffer[i] = '\0';
}
Rx_1_Size = 0;
}
}
if(Rx_2_Size > 4)//来自结点2的数据，应该转发给电脑
{
uint8 i = 0;
if(Rx_2_Buffer[Rx_2_Size-1] == 'e' && Rx_2_Buffer[0] == 's')
{
if(Rx_2_Buffer[1] == 't') //转发温度，加上节点号
{
char tem[9];
tem[0] = 's';
tem[1] = 't';
tem[2] = '2';//节点号
tem[3] = Rx_2_Buffer[2];
tem[4] = Rx_2_Buffer[3];
tem[5] = Rx_2_Buffer[4];
tem[6] = 'e';
tem[7] = '\0';
UART_PutString(tem);
}
else if(Rx_2_Buffer[1] == 'h') //转发温度过高
{
UART_PutString("sh2he");
}
else if(Rx_2_Buffer[1] == 'l') //转发温度过低
{
UART_PutString("sh2le");
}
for(i = 0; i < Rx_2_Size; ++i)//处理完 清指令队列
{
Rx_2_Buffer[i] = '\0';
}
Rx_2_Size = 0;
}
else if(Rx_2_Buffer[Rx_2_Size-1] == 'e' && Rx_2_Buffer[0] != 's')//指令出错
{
LCD_Char_1_PrintString("e");
for(i = 0; i < Rx_2_Size; ++i)//错误指令 清指令队列
{
Rx_2_Buffer[i] = '\0';
}
Rx_2_Size = 0;
}
else if(Rx_2_Size > 10)
{
LCD_Char_1_PrintString("c");
for(i = 0; i < Rx_2_Size; ++i)//错误指令 清指令队列
{
Rx_2_Buffer[i] = '\0';
}
Rx_2_Size = 0;
}
}
}
}