/**
* @brief DeInitializes the LCD.
* @param None
* @retval None
*/
void LCD_DeInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/*!< LCD Display Off */
LCD_DisplayOff();
/*!< LCD_SPI disable */
SPI_Cmd(LCD_SPI, DISABLE);
/*!< LCD_SPI DeInit */
SPI_I2S_DeInit(LCD_SPI);
/*!< Disable SPI clock */
RCC_APB1PeriphClockCmd(LCD_SPI_CLK, DISABLE);
/* Configure NCS in Output Push-Pull mode */
GPIO_InitStructure.GPIO_Pin = LCD_NCS_PIN;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN;
GPIO_InitStructure.GPIO_PuPd = GPIO_PuPd_NOPULL;
GPIO_Init(LCD_NCS_GPIO_PORT, &GPIO_InitStructure);
/* Configure SPI pins: SCK, MISO and MOSI */
GPIO_InitStructure.GPIO_Pin = LCD_SPI_SCK_PIN;
GPIO_Init(LCD_SPI_SCK_GPIO_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = LCD_SPI_MISO_PIN;
GPIO_Init(LCD_SPI_MISO_GPIO_PORT, &GPIO_InitStructure);
GPIO_InitStructure.GPIO_Pin = LCD_SPI_MOSI_PIN;
GPIO_Init(LCD_SPI_MOSI_GPIO_PORT, &GPIO_InitStructure);
}
void LCD_Init( uint8_t numLines, uint8_t numCols )
{
if ( numLines > 4 )
{
numLines = 4;
}
gNumLines = numLines;
if ( numCols > 40 )
{
numCols = 40;
}
gNumCols = numCols;
// Let the low level HAL do most of the initialization
LCD_HAL_Init();
LCD_DisplayOff();
LCD_Clear();
LCD_WriteCommand( LCD_ENTRY_MODE | LCD_ENTRY_INC );
LCD_HideCursor(); // also turns on display
} // LCD_Init
/**
* @brief DeInitializes the LCD.
* @param None
* @retval None
*/
void LCD_DeInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/* LCD Display Off */
LCD_DisplayOff();
/* BANK 4 (of NOR/SRAM Bank 1~4) is disabled */
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM4, ENABLE);
/* LCD_SPI DeInit */
FSMC_NORSRAMDeInit(FSMC_Bank1_NORSRAM4);
/* Set PD.00(D2), PD.01(D3), PD.04(NOE), PD.05(NWE), PD.08(D13), PD.09(D14),
PD.10(D15), PD.14(D0), PD.15(D1) as input floating */
GPIO_InitStructure.GPIO_Pin =
GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_8 |
GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15;
GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
GPIO_Init(GPIOD, &GPIO_InitStructure);
/* Set PE.07(D4), PE.08(D5), PE.09(D6), PE.10(D7), PE.11(D8), PE.12(D9), PE.13(D10),
PE.14(D11), PE.15(D12) as alternate function push pull */
GPIO_InitStructure.GPIO_Pin =
GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 | GPIO_Pin_11 |
GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
GPIO_Init(GPIOE, &GPIO_InitStructure);
/* Set PF.00(A0 (RS)) as alternate function push pull */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
GPIO_Init(GPIOF, &GPIO_InitStructure);
/* Set PG.12(NE4 (LCD/CS)) as alternate function push pull - CE3(LCD /CS) */
GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
GPIO_Init(GPIOG, &GPIO_InitStructure);
}
/**
* @brief Switches the backlight either ON or OFF
* @param state. This parameter can be one of the following values:
* @arg GL_ON
* @arg GL_OFF
* @retval None
*/
void GL_BackLightSwitch(uint8_t u8_State)
{
if (u8_State == GL_OFF) {
LCD_DisplayOff();
}
else if (u8_State == GL_ON) {
LCD_DisplayOn();
}
}
/**
* @brief LCD Default FSMC Init
* @param None
* @retval None
*/
void BSP_LCD_DeInit(void)
{
GPIO_InitTypeDef GPIO_InitStructure;
/*!< LCD Display Off */
LCD_DisplayOff();
/* BANK 3 (of NOR/SRAM Bank 1~4) is disabled */
hsram1_ssd2119.Init.NSBank = FSMC_NORSRAM_BANK3;
__FMC_NORSRAM_ENABLE(hsram1_ssd2119.Instance, hsram1_ssd2119.Init.NSBank);
/*!< LCD_SPI DeInit */
HAL_SRAM_DeInit(&hsram1_ssd2119);
/*-- GPIO Configuration ------------------------------------------------------*/
/** FSMC GPIO Configuration
PE3 ------> FSMC_A19
PE7 ------> FSMC_D4
PE8 ------> FSMC_D5
PE9 ------> FSMC_D6
PE10 ------> FSMC_D7
PE11 ------> FSMC_D8
PE12 ------> FSMC_D9
PE13 ------> FSMC_D10
PE14 ------> FSMC_D11
PE15 ------> FSMC_D12
PD8 ------> FSMC_D13
PD9 ------> FSMC_D14
PD10 ------> FSMC_D15
PD14 ------> FSMC_D0
PD15 ------> FSMC_D1
PD0 ------> FSMC_D2
PD1 ------> FSMC_D3
PD4 ------> FSMC_NOE
PD5 ------> FSMC_NWE
PD7 ------> FSMC_NE1
*/
/* SRAM Data lines configuration */
HAL_GPIO_DeInit(GPIOE, GPIO_PIN_3|GPIO_PIN_7|GPIO_PIN_8|GPIO_PIN_9
|GPIO_PIN_10|GPIO_PIN_11|GPIO_PIN_12|GPIO_PIN_13
|GPIO_PIN_14|GPIO_PIN_15);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_14
|GPIO_PIN_15|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_4
|GPIO_PIN_5|GPIO_PIN_7);
}
/*******************************************************************************
* Function Name: LCD_Stop
********************************************************************************
*
* Summary:
* Turns off the display of the LCD screen.
*
* Parameters:
* None.
*
* Return:
* None.
*
* Reentrant:
* No.
*
*******************************************************************************/
void LCD_Stop(void)
{
/* Calls LCD Off Macro */
LCD_DisplayOff();
LCD_enableState = 0u;
}
/**
* @brief Disables the display.
* @param None
* @retval None
*/
void BSP_LCD_DisplayOff(void)
{
LCD_DisplayOff();
}
/*
******************************************************************************
*函数：void LCD_GPIOInit(void)
*输入：void
*输出：void
*描述：LCD初始化
******************************************************************************
*/
void LCD_Init(void)
{
LTDC_InitTypeDef LTDC_InitStruct;
LTDC_Layer_InitTypeDef LTDC_Layer_InitStruct;
LTDC_Layer_TypeDef LTDC_Layerx;
/* IO口初始化 */
LCD_GPIOInit();
LCD_DisplayOff();
/* 使能LCD时钟 */
RCC_APB2PeriphClockCmd(RCC_APB2Periph_LTDC, ENABLE);
/* 使能DMA失踪*/
RCC_AHB1PeriphClockCmd(RCC_AHB1Periph_DMA2D, ENABLE);
/* 水平同步信号---低电平有效 */
LTDC_InitStruct.LTDC_HSPolarity = LTDC_HSPolarity_AL;
/* 垂直同步信号---低电平有效 */
LTDC_InitStruct.LTDC_VSPolarity = LTDC_VSPolarity_AL;
/* 数据使能信号---低电平有效 */
LTDC_InitStruct.LTDC_DEPolarity = LTDC_DEPolarity_AL;
/* 像素时钟配置--- */
LTDC_InitStruct.LTDC_PCPolarity = LTDC_DEPolarity_AL;
/* LCD背光设置 */
LTDC_InitStruct.LTDC_BackgroundRedValue = 0;
LTDC_InitStruct.LTDC_BackgroundGreenValue = 0;
LTDC_InitStruct.LTDC_BackgroundBlueValue = 0;
/*
****************************************************************************
*PLLSAI_VCO = HSE*PLLSAI_N / PLL_M = 8 * 192 / 8 = 192MHz
*PLLLCDCLK = PLLSAI_VCO / PLLSAI_R = 192 / 3 = 64 Mhz
*LTDC clock frequency = PLLLCDCLK / RCC_PLLSAIDivR = 64 / 8 = 8 Mhz
****************************************************************************
*/
RCC_PLLSAIConfig(192, 7, 3);
RCC_LTDCCLKDivConfig(RCC_PLLSAIDivR_Div4);
/* 使能PLLSAI时钟 */
RCC_PLLSAICmd(ENABLE);
/* 等待PLLSAI时钟 */
while(RCC_GetFlagStatus(RCC_FLAG_PLLSAIRDY) == RESET){}
/* */
LTDC_InitStruct.LTDC_HorizontalSync = 40;
/* */
LTDC_InitStruct.LTDC_VerticalSync = 9;
/* */
LTDC_InitStruct.LTDC_AccumulatedHBP = 42;
/* */
LTDC_InitStruct.LTDC_AccumulatedVBP = 11;
/* */
LTDC_InitStruct.LTDC_AccumulatedActiveW = 522;
/* */
LTDC_InitStruct.LTDC_AccumulatedActiveH = 283;
/* */
LTDC_InitStruct.LTDC_TotalWidth = 524;
/* */
LTDC_InitStruct.LTDC_TotalHeigh = 285;
LTDC_Init(<DC_InitStruct);
LTDC_Layer_InitStruct.LTDC_HorizontalStart = 43;
LTDC_Layer_InitStruct.LTDC_HorizontalStop = (480 + 43 - 1);
LTDC_Layer_InitStruct.LTDC_VarticalStart = 12;
LTDC_Layer_InitStruct.LTDC_VerticalStop = (272 + 12 - 1);
/* Pixel Format configuration*/
LTDC_Layer_InitStruct.LTDC_PixelFormat = LTDC_Pixelformat_RGB565;
/* Alpha constant (255 totally opaque) */
LTDC_Layer_InitStruct.LTDC_ConstantAlpha = 255;
/* Default Color configuration (configure A,R,G,B component values) */
LTDC_Layer_InitStruct.LTDC_DefaultColorBlue = 0;
LTDC_Layer_InitStruct.LTDC_DefaultColorGreen = 0;
LTDC_Layer_InitStruct.LTDC_DefaultColorRed = 0;
LTDC_Layer_InitStruct.LTDC_DefaultColorAlpha = 0;
/* Configure blending factors */
LTDC_Layer_InitStruct.LTDC_BlendingFactor_1 = LTDC_BlendingFactor1_CA;
LTDC_Layer_InitStruct.LTDC_BlendingFactor_2 = LTDC_BlendingFactor2_CA;
/* the length of one line of pixels in bytes + 3 then :
Line Lenth = Active high width x number of bytes per pixel + 3
Active high width = LCD_PIXEL_WIDTH
number of bytes per pixel = 2 (pixel_format : RGB565)
*/
LTDC_Layer_InitStruct.LTDC_CFBLineLength = ((480 * 2) + 3);
/* the pitch is the increment from the start of one line of pixels to the
start of the next line in bytes, then :
Pitch = Active high width x number of bytes per pixel
*/
LTDC_Layer_InitStruct.LTDC_CFBPitch = (480 * 2);
/* configure the number of lines */
LTDC_Layer_InitStruct.LTDC_CFBLineNumber = 272;
/* Input Address configuration */
LTDC_Layer_InitStruct.LTDC_CFBStartAdress = LCD_FRAME_BUFFER;
LTDC_LayerInit(LTDC_Layer1, <DC_Layer_InitStruct);
/* Configure Layer2 */
LTDC_Layer_InitStruct.LTDC_CFBStartAdress = LCD_FRAME_BUFFER + BUFFER_OFFSET;
LTDC_Layer_InitStruct.LTDC_BlendingFactor_1 = LTDC_BlendingFactor1_PAxCA;
LTDC_Layer_InitStruct.LTDC_BlendingFactor_2 = LTDC_BlendingFactor2_PAxCA;
LTDC_LayerInit(LTDC_Layer2, <DC_Layer_InitStruct);
LTDC_ReloadConfig(LTDC_IMReload);
/* Enable foreground & background Layers */
LTDC_LayerCmd(LTDC_Layer1, ENABLE);
// LTDC_LayerCmd(LTDC_Layer2, ENABLE);
LTDC_ReloadConfig(LTDC_IMReload);
LCD_DisplayOn();
}