/**
* prcmu_abb_read() - Read register value(s) from the ABB.
* @slave: The I2C slave address.
* @reg: The (start) register address.
* @value: The read out value(s).
* @size: The number of registers to read.
*
* Reads register value(s) from the ABB.
* @size has to be 1 for the current firmware version.
*/
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
{
int r;
if (size != 1)
return -EINVAL;
r = mutex_lock_interruptible(&mb5_transfer.lock);
if (r)
return r;
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(I2C_READ(slave), REQ_MB5_I2C_SLAVE_OP);
writeb(I2C_STOP_EN, REQ_MB5_I2C_HW_BITS);
writeb(reg, REQ_MB5_I2C_REG);
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
if (!wait_for_completion_timeout(&mb5_transfer.work,
msecs_to_jiffies(500))) {
pr_err("prcmu: prcmu_abb_read timed out.\n");
r = -EIO;
goto unlock_and_return;
}
r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
if (!r)
*value = mb5_transfer.ack.value;
unlock_and_return:
mutex_unlock(&mb5_transfer.lock);
return r;
}
int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
{
int r;
if ((size < 1) || (4 < size))
return -EINVAL;
mutex_lock(&mb5_transfer.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
writeb(reg, PRCM_REQ_MB5_I2C_REG);
writeb(size, PRCM_REQ_MB5_I2C_SIZE);
memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size);
writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER);
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb5_transfer.work);
if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) &&
(mb5_transfer.ack.status == RC_SUCCESS))
r = 0;
else
r = -EIO;
mutex_unlock(&mb5_transfer.lock);
return r;
}
static void ack_dbb_wakeup(void)
{
unsigned long flags;
spin_lock_irqsave(&mb0_transfer.lock, flags);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER);
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
static void read_mailbox_5(void)
{
mb5_transfer.ack.status = readb(ACK_MB5_I2C_STATUS);
mb5_transfer.ack.value = readb(ACK_MB5_I2C_VAL);
complete(&mb5_transfer.work);
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
}
static irqreturn_t prcmu_irq_handler(int irq, void *data)
{
u32 bits;
u8 n;
bits = (readl(PRCM_ARM_IT1_VAL) & (MBOX_BIT(NUM_MBOX) - 1));
if (unlikely(!bits))
return IRQ_NONE;
for (n = 0; bits; n++) {
if (bits & MBOX_BIT(n)) {
bits -= MBOX_BIT(n);
read_mailbox[n]();
}
}
return IRQ_HANDLED;
}
static int __init prcmu_init(void)
{
mutex_init(&mb5_transfer.lock);
init_completion(&mb5_transfer.work);
/* Clean up the mailbox interrupts after pre-kernel code. */
writel((MBOX_BIT(NUM_MBOX) - 1), PRCM_ARM_IT1_CLEAR);
return request_irq(IRQ_PRCMU, prcmu_irq_handler, 0, "prcmu", NULL);
}
static irqreturn_t prcmu_irq_handler(int irq, void *data)
{
u32 bits;
u8 n;
irqreturn_t r;
bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
if (unlikely(!bits))
return IRQ_NONE;
r = IRQ_HANDLED;
for (n = 0; bits; n++) {
if (bits & MBOX_BIT(n)) {
bits -= MBOX_BIT(n);
if (read_mailbox[n]())
r = IRQ_WAKE_THREAD;
}
}
return r;
}
static bool read_mailbox_0(void)
{
bool r;
u8 header;
header = readb(PRCM_ACK_MB0_HEADER);
switch (header) {
case AMB0H_WAKE_UP:
r = true;
break;
default:
print_unknown_header_warning(0, header);
r = false;
break;
}
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLR);
return r;
}
static bool read_mailbox_5(void)
{
u8 header;
header = readb(PRCM_ACK_MB5_HEADER);
switch (header) {
case MB5H_I2C_READ:
memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4);
case MB5H_I2C_WRITE:
mb5_transfer.ack.header = header;
mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE);
complete(&mb5_transfer.work);
break;
default:
print_unknown_header_warning(5, header);
break;
}
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_7(void)
{
writel(MBOX_BIT(7), PRCM_ARM_IT1_CLR);
return false;
}
static bool read_mailbox_6(void)
{
writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
return false;
}
static void read_mailbox_7(void)
{
writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
}
