/**
* OpenPilot Main function:
*
* Initialize PiOS<BR>
* Create the "System" task (SystemModInitializein Modules/System/systemmod.c) <BR>
* Start FreeRTOS Scheduler (vTaskStartScheduler) (Now handled by caller)
* If something goes wrong, blink LED1 and LED2 every 100ms
*
*/
int main()
{
/* NOTE: Do NOT modify the following start-up sequence */
/* Any new initialization functions should be added in OpenPilotInit() */
/* Brings up System using CMSIS functions, enables the LEDs. */
PIOS_SYS_Init();
/* Architecture dependant Hardware and
* core subsystem initialisation
* (see pios_board.c for your arch)
* */
PIOS_Board_Init();
/* Initialize modules */
MODULE_INITIALISE_ALL(PIOS_WDG_Clear);
/* swap the stack to use the IRQ stack */
Stack_Change();
/* Start the FreeRTOS scheduler which should never returns.*/
vTaskStartScheduler();
/* If all is well we will never reach here as the scheduler will now be running. */
/* Do some indication to user that something bad just happened */
while (1) {
#if defined(PIOS_LED_HEARTBEAT)
PIOS_LED_Toggle(PIOS_LED_HEARTBEAT);
#endif /* PIOS_LED_HEARTBEAT */
PIOS_DELAY_WaitmS(100);
}
return 0;
}
/**
* Tau Labs Main function:
*
* Initialize PiOS<BR>
* Create the "System" task (SystemModInitializein Modules/System/systemmod.c) <BR>
* Start FreeRTOS Scheduler (vTaskStartScheduler) (Now handled by caller)
* If something goes wrong, blink LED1 and LED2 every 100ms
*
*/
int main()
{
/* NOTE: Do NOT modify the following start-up sequence */
/* Any new initialization functions should be added in OpenPilotInit() */
/* Brings up System using CMSIS functions, enables the LEDs. */
PIOS_SYS_Init();
/* Architecture dependant Hardware and
* core subsystem initialisation
* (see pios_board.c for your arch)
* */
PIOS_Board_Init();
PIOS_WDG_Clear();
#ifdef ERASE_FLASH
PIOS_Flash_Jedec_EraseChip();
#if defined(PIOS_LED_HEARTBEAT)
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
#endif /* PIOS_LED_HEARTBEAT */
while (1) ;
#endif
/* Initialize modules */
MODULE_INITIALISE_ALL(PIOS_WDG_Clear);
/* swap the stack to use the IRQ stack */
Stack_Change();
/* Start the FreeRTOS scheduler, which should never return.
*
* NOTE: OpenPilot runs an operating system (FreeRTOS), which constantly calls
* (schedules) function files (modules). These functions never return from their
* while loops, which explains why each module has a while(1){} segment. Thus,
* the OpenPilot software actually starts at the vTaskStartScheduler() function,
* even though this is somewhat obscure.
*
* In addition, there are many main() functions in the OpenPilot firmware source tree
* This is because each main() refers to a separate hardware platform. Of course,
* C only allows one main(), so only the relevant main() function is compiled when
* making a specific firmware.
*
*/
vTaskStartScheduler();
/* If all is well we will never reach here as the scheduler will now be running. */
/* Do some indication to user that something bad just happened */
while (1) {
#if defined(PIOS_LED_HEARTBEAT)
PIOS_LED_Toggle(PIOS_LED_HEARTBEAT);
#endif /* PIOS_LED_HEARTBEAT */
PIOS_DELAY_WaitmS(100);
}
return 0;
}
/**
* Initialization task.
*
* Runs board and module initialization, then terminates.
*/
void initTask(void *parameters)
{
/* board driver init */
PIOS_Board_Init();
/* Initialize modules */
MODULE_INITIALISE_ALL(PIOS_WDG_Clear);
/* terminate this task */
PIOS_Thread_Delete(NULL);
}
/**
* Initialisation task.
*
* Runs board and module initialisation, then terminates.
*/
void
initTask(void *parameters)
{
/* board driver init */
PIOS_Board_Init();
#ifdef ERASE_FLASH
PIOS_Flash_Jedec_EraseChip();
#if defined(PIOS_LED_HEARTBEAT)
PIOS_LED_Off(PIOS_LED_HEARTBEAT);
#endif /* PIOS_LED_HEARTBEAT */
while (1) ;
#endif
/* Initialize modules */
MODULE_INITIALISE_ALL(PIOS_WDG_Clear);
/* terminate this task */
PIOS_Thread_Delete(NULL);
}
