Ejemplo n.º 1
0
int MPIOI_File_read_all_begin(MPI_File mpi_fh,
			      MPI_Offset offset,
			      int file_ptr_type,
			      void *buf,
			      int count,
			      MPI_Datatype datatype,
			      char *myname)
{
    int error_code, datatype_size;
    ADIO_File fh;

    MPID_CS_ENTER();
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */
    
    MPI_Type_size(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);

    if (fh->split_coll_count) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_IO, 
					  "**iosplitcoll", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    fh->split_coll_count = 1;

    ADIO_ReadStridedColl(fh, buf, count, datatype, file_ptr_type,
			 offset, &fh->split_status, &error_code);
fn_exit:
    MPIR_Nest_decr();
    MPID_CS_EXIT();

    return error_code;
}
Ejemplo n.º 2
0
/*@
    MPI_File_get_type_extent - Returns the extent of datatype in the file

Input Parameters:
. fh - file handle (handle)
. datatype - datatype (handle)

Output Parameters:
. extent - extent of the datatype (nonnegative integer)

.N fortran
@*/
int MPI_File_get_type_extent(MPI_File mpi_fh, MPI_Datatype datatype, 
                             MPI_Aint *extent)
{
    int error_code;
    ADIO_File fh;
    static char myname[] = "MPI_FILE_GET_TYPE_EXTENT";

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    /* FIXME: handle other file data representations */

    error_code = MPI_Type_extent(datatype, extent);

fn_exit:
    return error_code;
}
Ejemplo n.º 3
0
int MPIOI_File_write_all(MPI_File fh,
			 MPI_Offset offset,
			 int file_ptr_type,
			 const void *buf,
			 int count,
			 MPI_Datatype datatype,
			 char *myname,
			 MPI_Status *status)
{
    int error_code;
    MPI_Count datatype_size;
    ADIO_File adio_fh;
    void *e32buf=NULL;
    const void *xbuf=NULL;

    MPIU_THREAD_CS_ENTER(ALLFUNC,);

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_WRITABLE(adio_fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    xbuf = buf;
    if (adio_fh->is_external32) {
	error_code = MPIU_external32_buffer_setup(buf, count, datatype, &e32buf);
	if (error_code != MPI_SUCCESS) 
	    goto fn_exit;

	xbuf = e32buf;
    }
    ADIO_WriteStridedColl(adio_fh, xbuf, count, datatype, file_ptr_type,
                          offset, status, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

fn_exit:
    if (e32buf != NULL) ADIOI_Free(e32buf);
    MPIU_THREAD_CS_EXIT(ALLFUNC,);

    return error_code;
}
Ejemplo n.º 4
0
/*@
    MPI_File_write_ordered - Collective write using shared file pointer

Input Parameters:
. fh - file handle (handle)
. buf - initial address of buffer (choice)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. status - status object (Status)

.N fortran
@*/
int MPI_File_write_ordered(MPI_File fh, ROMIO_CONST void *buf, int count,
			   MPI_Datatype datatype, MPI_Status *status)
{
    int error_code, nprocs, myrank;
    ADIO_Offset incr;
    MPI_Count datatype_size;
    int source, dest;
    static char myname[] = "MPI_FILE_WRITE_ORDERED";
    ADIO_Offset shared_fp;
    ADIO_File adio_fh;
    void *e32buf=NULL;
    const void *xbuf;

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);

    MPI_Comm_size(adio_fh->comm, &nprocs);
    MPI_Comm_rank(adio_fh->comm, &myrank);

    incr = (count*datatype_size)/adio_fh->etype_size;
    /* Use a message as a 'token' to order the operations */
    source = myrank - 1;
    dest   = myrank + 1;
    if (source < 0) source = MPI_PROC_NULL;
    if (dest >= nprocs) dest = MPI_PROC_NULL;
    MPI_Recv(NULL, 0, MPI_BYTE, source, 0, adio_fh->comm, MPI_STATUS_IGNORE);

    ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_FATAL,
					  myname, __LINE__, MPI_ERR_INTERN, 
					  "**iosharedfailed", 0);
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Send(NULL, 0, MPI_BYTE, dest, 0, adio_fh->comm);

    xbuf = buf;
    if (adio_fh->is_external32) {
	error_code = MPIU_external32_buffer_setup(buf, count, datatype, &e32buf);
	if (error_code != MPI_SUCCESS) 
	    goto fn_exit;

	xbuf = e32buf;
    }

    ADIO_WriteStridedColl(adio_fh, xbuf, count, datatype, ADIO_EXPLICIT_OFFSET,
                          shared_fp, status, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

fn_exit:
    if (e32buf != NULL) ADIOI_Free(e32buf);

    /* FIXME: Check for error code from WriteStridedColl? */
    return error_code;
}
Ejemplo n.º 5
0
/*@
    MPI_File_read_ordered_begin - Begin a split collective read using shared file pointer

Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. buf - initial address of buffer (choice)

.N fortran
@*/
int MPI_File_read_ordered_begin(MPI_File fh, void *buf, int count,
				MPI_Datatype datatype)
{
    int error_code, datatype_size, nprocs, myrank, incr;
    int source, dest;
    ADIO_Offset shared_fp;
    ADIO_File adio_fh;
    static char myname[] = "MPI_FILE_READ_ORDERED_BEGIN";
    void *xbuf=NULL, *e32_buf=NULL;

    MPIU_THREAD_CS_ENTER(ALLFUNC,);

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);

    if (adio_fh->split_coll_count)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_IO, 
					  "**iosplitcoll", 0);
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    adio_fh->split_coll_count = 1;


    MPI_Type_size(datatype, &datatype_size);
    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);

    MPI_Comm_size(adio_fh->comm, &nprocs);
    MPI_Comm_rank(adio_fh->comm, &myrank);

    incr = (count*datatype_size)/adio_fh->etype_size;
    /* Use a message as a 'token' to order the operations */
    source = myrank - 1;
    dest   = myrank + 1;
    if (source < 0) source = MPI_PROC_NULL;
    if (dest >= nprocs) dest = MPI_PROC_NULL;
    MPI_Recv(NULL, 0, MPI_BYTE, source, 0, adio_fh->comm, MPI_STATUS_IGNORE);

    ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    {
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Send(NULL, 0, MPI_BYTE, dest, 0, adio_fh->comm);

    xbuf = buf;
    if (adio_fh->is_external32)
    {
        error_code = MPIU_datatype_full_size(datatype, &datatype_size);
        if (error_code != MPI_SUCCESS)
            goto fn_exit;

        e32_buf = ADIOI_Malloc(datatype_size*count);
	xbuf = e32_buf;
    }


    ADIO_ReadStridedColl(adio_fh, xbuf, count, datatype, ADIO_EXPLICIT_OFFSET,
			 shared_fp, &adio_fh->split_status, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

    if (e32_buf != NULL) {
        error_code = MPIU_read_external32_conversion_fn(xbuf, datatype,
                count, e32_buf);
	ADIOI_Free(e32_buf);
    }

fn_exit:
    MPIU_THREAD_CS_EXIT(ALLFUNC,);

    return error_code;
}
Ejemplo n.º 6
0
int MPIOI_File_iread_all(MPI_File fh,
            MPI_Offset offset,
            int file_ptr_type,
            void *buf,
            int count,
            MPI_Datatype datatype,
            char *myname,
            MPI_Request *request)
{
    int error_code;
    MPI_Count datatype_size;
    ADIO_File adio_fh;
    void *xbuf=NULL, *e32_buf=NULL;

    ROMIO_THREAD_CS_ENTER();

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0) {
        error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
                                          myname, __LINE__, MPI_ERR_ARG,
                                          "**iobadoffset", 0);
        error_code = MPIO_Err_return_file(adio_fh, error_code);
        goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(adio_fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    xbuf = buf;
    if (adio_fh->is_external32) {
        MPI_Aint e32_size = 0;
        error_code = MPIU_datatype_full_size(datatype, &e32_size);
        if (error_code != MPI_SUCCESS)
            goto fn_exit;

        e32_buf = ADIOI_Malloc(e32_size*count);
        xbuf = e32_buf;
    }

    ADIO_IreadStridedColl(adio_fh, xbuf, count, datatype, file_ptr_type,
                          offset, request, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

    if (e32_buf != NULL) {
        error_code = MPIU_read_external32_conversion_fn(buf, datatype,
                                                        count, e32_buf);
        ADIOI_Free(e32_buf);
    }

fn_exit:
    ROMIO_THREAD_CS_EXIT();

    return error_code;
}
Ejemplo n.º 7
0
int MPIOI_File_iwrite(MPI_File mpi_fh,
		      MPI_Offset offset,
		      int file_ptr_type,
		      void *buf,
		      int count,
		      MPI_Datatype datatype,
		      char *myname,
		      MPI_Request *request)
{
    int error_code, bufsize, buftype_is_contig, filetype_is_contig;
    int datatype_size;
    ADIO_Status status;
    ADIO_Offset off;
    ADIO_File fh;
    MPI_Offset nbytes=0;

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0) {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Type_size(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_WRITABLE(fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);
    
    ADIOI_TEST_DEFERRED(fh, myname, &error_code);

    if (buftype_is_contig && filetype_is_contig) {
	/* convert sizes to bytes */
	bufsize = datatype_size * count;
	if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
	    off = fh->disp + fh->etype_size * offset;
	}
	else {
	    off = fh->fp_ind;
	}

        if (!(fh->atomicity)) {
	    ADIO_IwriteContig(fh, buf, count, datatype, file_ptr_type,
			      off, request, &error_code);
	}
	else {
            /* to maintain strict atomicity semantics with other concurrent
              operations, lock (exclusive) and call blocking routine */
	    if (ADIO_Feature(fh, ADIO_LOCKS) )
	    {
                ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);
	    }

            ADIO_WriteContig(fh, buf, count, datatype, file_ptr_type, off, 
			     &status, &error_code);  

	    if (ADIO_Feature(fh, ADIO_LOCKS) )
	    {
                ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
	    }
	    if (error_code == MPI_SUCCESS) {
		nbytes = count * datatype_size;
	    }
	    
	    MPIO_Completed_request_create(&fh, nbytes, &error_code, request);
	}
    }
    else {
	ADIO_IwriteStrided(fh, buf, count, datatype, file_ptr_type,
			   offset, request, &error_code);
    }
fn_exit:
    return error_code;
}
Ejemplo n.º 8
0
/*@
    MPI_File_read_ordered - Collective read using shared file pointer

Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. buf - initial address of buffer (choice)
. status - status object (Status)

.N fortran
@*/
int MPI_File_read_ordered(MPI_File fh, void *buf, int count,
                          MPI_Datatype datatype, MPI_Status *status)
{
    int error_code, nprocs, myrank;
    ADIO_Offset incr;
    MPI_Count datatype_size;
    int source, dest;
    static char myname[] = "MPI_FILE_READ_ORDERED";
    ADIO_Offset shared_fp=0;
    ADIO_File adio_fh;

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_TEST_DEFERRED(adio_fh, "MPI_File_read_ordered", &error_code);

    MPI_Comm_size(adio_fh->comm, &nprocs);
    MPI_Comm_rank(adio_fh->comm, &myrank);

    incr = (count*datatype_size)/adio_fh->etype_size;
    
    /* Use a message as a 'token' to order the operations */
    source = myrank - 1;
    dest   = myrank + 1;
    if (source < 0) source = MPI_PROC_NULL;
    if (dest >= nprocs) dest = MPI_PROC_NULL;
    MPI_Recv(NULL, 0, MPI_BYTE, source, 0, adio_fh->comm, MPI_STATUS_IGNORE);

    ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS) {
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Send(NULL, 0, MPI_BYTE, dest, 0, adio_fh->comm);

    ADIO_ReadStridedColl(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			 shared_fp, status, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

fn_exit:
    /* FIXME: Check for error code from ReadStridedColl? */
    return error_code;
}
Ejemplo n.º 9
0
Archivo: iread_sh.c Proyecto: ORNL/ompi
/*@
    MPI_File_iread_shared - Nonblocking read using shared file pointer

Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. buf - initial address of buffer (choice)
. request - request object (handle)

.N fortran
@*/
int MPI_File_iread_shared(MPI_File fh, void *buf, int count,
                          MPI_Datatype datatype, MPI_Request *request)
{
    int error_code, buftype_is_contig, filetype_is_contig;
    ADIO_Offset bufsize;
    ADIO_File adio_fh;
    static char myname[] = "MPI_FILE_IREAD_SHARED";
    MPI_Count datatype_size, incr;
    MPI_Status status;
    ADIO_Offset off, shared_fp;
    MPI_Offset nbytes=0;

    MPIU_THREAD_CS_ENTER(ALLFUNC,);

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(adio_fh->filetype, &filetype_is_contig);

    ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);

    incr = (count*datatype_size)/adio_fh->etype_size;
    ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    {
	/* note: ADIO_Get_shared_fp should have set up error code already? */
	MPIO_Err_return_file(adio_fh, error_code);
    }
    /* --END ERROR HANDLING-- */

    if (buftype_is_contig && filetype_is_contig)
    {
    /* convert count and shared_fp to bytes */
	bufsize = datatype_size * count;
	off = adio_fh->disp + adio_fh->etype_size * shared_fp;
        if (!(adio_fh->atomicity))
	{
	    ADIO_IreadContig(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			off, request, &error_code);
	}
        else
	{
            /* to maintain strict atomicity semantics with other concurrent
              operations, lock (exclusive) and call blocking routine */

            if (adio_fh->file_system != ADIO_NFS)
	    {
                ADIOI_WRITE_LOCK(adio_fh, off, SEEK_SET, bufsize);
	    }

            ADIO_ReadContig(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			    off, &status, &error_code);  

            if (adio_fh->file_system != ADIO_NFS)
	    {
                ADIOI_UNLOCK(adio_fh, off, SEEK_SET, bufsize);
	    }
	    if (error_code == MPI_SUCCESS){
		    nbytes = count * datatype_size;
	    }
	    MPIO_Completed_request_create(&adio_fh, nbytes, &error_code, request);
        }
    }
    else
    {
	ADIO_IreadStrided(adio_fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			   shared_fp, request, &error_code);
    }

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

fn_exit:
    MPIU_THREAD_CS_EXIT(ALLFUNC,);
    return error_code;
}
Ejemplo n.º 10
0
/*@
    MPI_File_write_ordered_begin - Begin a split collective write using shared file pointer

Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. buf - initial address of buffer (choice)

.N fortran
@*/
int MPI_File_write_ordered_begin(MPI_File mpi_fh, void *buf, int count, 
				 MPI_Datatype datatype)
{
    int error_code, datatype_size, nprocs, myrank, incr;
    int source, dest;
    static char myname[] = "MPI_FILE_WRITE_ORDERED_BEGIN";
    ADIO_Offset shared_fp;
    ADIO_File fh;

    MPID_CS_ENTER();
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);

    if (fh->split_coll_count)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_IO, 
					  "**iosplitcoll", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    fh->split_coll_count = 1;

    MPI_Type_size(datatype, &datatype_size);
    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_TEST_DEFERRED(fh, myname, &error_code);

    MPI_Comm_size(fh->comm, &nprocs);
    MPI_Comm_rank(fh->comm, &myrank);

    incr = (count*datatype_size)/fh->etype_size;
    /* Use a message as a 'token' to order the operations */
    source = myrank - 1;
    dest   = myrank + 1;
    if (source < 0) source = MPI_PROC_NULL;
    if (dest >= nprocs) dest = MPI_PROC_NULL;
    MPI_Recv(NULL, 0, MPI_BYTE, source, 0, fh->comm, MPI_STATUS_IGNORE);

    ADIO_Get_shared_fp(fh, incr, &shared_fp, &error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_FATAL,
					  myname, __LINE__, MPI_ERR_INTERN, 
					  "**iosharedfailed", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Send(NULL, 0, MPI_BYTE, dest, 0, fh->comm);

    ADIO_WriteStridedColl(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			  shared_fp, &fh->split_status, &error_code);

fn_exit:
    MPIR_Nest_decr();
    MPID_CS_EXIT();

    /* FIXME: Check for error code from WriteStridedColl? */
    return error_code;
}
Ejemplo n.º 11
0
int MPIOI_File_read(MPI_File mpi_fh,
		    MPI_Offset offset,
		    int file_ptr_type,
		    void *buf,
		    int count,
		    MPI_Datatype datatype,
		    char *myname,
		    MPI_Status *status)
{
    int error_code, bufsize, buftype_is_contig, filetype_is_contig;
    int datatype_size;
    ADIO_File fh;
    ADIO_Offset off;

    MPID_CS_ENTER();
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Type_size(datatype, &datatype_size);
    if (count*datatype_size == 0)
    {
#ifdef HAVE_STATUS_SET_BYTES
       MPIR_Status_set_bytes(status, datatype, 0);
#endif
	error_code = MPI_SUCCESS;
	goto fn_exit;
    }

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);

    ADIOI_TEST_DEFERRED(fh, myname, &error_code);

    if (buftype_is_contig && filetype_is_contig)
    {
    /* convert count and offset to bytes */
	bufsize = datatype_size * count;
	if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
	    off = fh->disp + fh->etype_size * offset;
	}
	else /* ADIO_INDIVIDUAL */ {
	    off = fh->fp_ind;
	}

        /* if atomic mode requested, lock (exclusive) the region, because
           there could be a concurrent noncontiguous request. Locking doesn't
           work on PIOFS and PVFS, and on NFS it is done in the
           ADIO_ReadContig.
	 */

        if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) && 
            (fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS) && 
	   	 (fh->file_system != ADIO_PVFS2))
            ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);

	ADIO_ReadContig(fh, buf, count, datatype, file_ptr_type,
			off, status, &error_code); 

        if ((fh->atomicity) && (fh->file_system != ADIO_PIOFS) && 
            (fh->file_system != ADIO_NFS) && (fh->file_system != ADIO_PVFS) &&
	    	(fh->file_system != ADIO_PVFS2))
            ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
    }
    else
    {
	ADIO_ReadStrided(fh, buf, count, datatype, file_ptr_type,
			  offset, status, &error_code);
	/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
    }

fn_exit:
    MPIR_Nest_decr();
    MPID_CS_EXIT();

    return error_code;
}
Ejemplo n.º 12
0
Archivo: read.c Proyecto: ICLDisco/ompi
int MPIOI_File_read(MPI_File fh,
		    MPI_Offset offset,
		    int file_ptr_type,
		    void *buf,
		    int count,
		    MPI_Datatype datatype,
		    char *myname,
		    MPI_Status *status)
{
    int error_code, buftype_is_contig, filetype_is_contig;
    MPI_Count datatype_size;
    ADIO_File adio_fh;
    ADIO_Offset off, bufsize;
    void *xbuf=NULL, *e32_buf=NULL;

    ROMIO_THREAD_CS_ENTER();

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);

    if (file_ptr_type == ADIO_EXPLICIT_OFFSET && offset < 0)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_RECOVERABLE,
					  myname, __LINE__, MPI_ERR_ARG,
					  "**iobadoffset", 0);
	error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    if (count*datatype_size == 0)
    {
#ifdef HAVE_STATUS_SET_BYTES
       MPIR_Status_set_bytes(status, datatype, 0);
#endif
	error_code = MPI_SUCCESS;
	goto fn_exit;
    }

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(adio_fh, myname, error_code);
    MPIO_CHECK_NOT_SEQUENTIAL_MODE(adio_fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(adio_fh->filetype, &filetype_is_contig);

    ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);

    xbuf = buf;
    if (adio_fh->is_external32)
    {
        MPI_Aint e32_size = 0;
        error_code = MPIU_datatype_full_size(datatype, &e32_size);
        if (error_code != MPI_SUCCESS)
            goto fn_exit;

        e32_buf = ADIOI_Malloc(e32_size*count);
	xbuf = e32_buf;
    }

    if (buftype_is_contig && filetype_is_contig)
    {
    /* convert count and offset to bytes */
	bufsize = datatype_size * count;
	if (file_ptr_type == ADIO_EXPLICIT_OFFSET) {
	    off = adio_fh->disp + adio_fh->etype_size * offset;
	}
	else /* ADIO_INDIVIDUAL */ {
	    off = adio_fh->fp_ind;
	}

        /* if atomic mode requested, lock (exclusive) the region, because
           there could be a concurrent noncontiguous request.
	 */
        if ((adio_fh->atomicity) && ADIO_Feature(adio_fh, ADIO_LOCKS)) {
            ADIOI_WRITE_LOCK(adio_fh, off, SEEK_SET, bufsize);
	}

	ADIO_ReadContig(adio_fh, xbuf, count, datatype, file_ptr_type,
			off, status, &error_code); 

        if ((adio_fh->atomicity) && ADIO_Feature(adio_fh, ADIO_LOCKS)) {
            ADIOI_UNLOCK(adio_fh, off, SEEK_SET, bufsize);
	}
    }
    else
    {
	ADIO_ReadStrided(adio_fh, xbuf, count, datatype, file_ptr_type,
			  offset, status, &error_code);
	/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
    }

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

    if (e32_buf != NULL) {
        error_code = MPIU_read_external32_conversion_fn(buf, datatype,
                count, e32_buf);
	ADIOI_Free(e32_buf);
    }

fn_exit:
    ROMIO_THREAD_CS_EXIT();

    return error_code;
}
Ejemplo n.º 13
0
/*@
    MPI_File_write_shared - Write using shared file pointer

Input Parameters:
. fh - file handle (handle)
. buf - initial address of buffer (choice)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. status - status object (Status)

.N fortran
@*/
int MPI_File_write_shared(MPI_File mpi_fh, void *buf, int count, 
                          MPI_Datatype datatype, MPI_Status *status)
{
    int error_code, bufsize, buftype_is_contig, filetype_is_contig;
    static char myname[] = "MPI_FILE_READ_SHARED";
    int datatype_size, incr;
    ADIO_Offset off, shared_fp;
    ADIO_File fh;

    MPIU_THREAD_SINGLE_CS_ENTER("io");
    MPIR_Nest_incr();

    fh = MPIO_File_resolve(mpi_fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(fh, myname, error_code);
    MPIO_CHECK_COUNT(fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    MPI_Type_size(datatype, &datatype_size);
    if (count*datatype_size == 0) {
#ifdef HAVE_STATUS_SET_BYTES
       MPIR_Status_set_bytes(status, datatype, 0);
#endif
       error_code = MPI_SUCCESS;
       goto fn_exit;
    }

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(fh->filetype, &filetype_is_contig);

    ADIOI_TEST_DEFERRED(fh, myname, &error_code);

    incr = (count*datatype_size)/fh->etype_size;

    ADIO_Get_shared_fp(fh, incr, &shared_fp, &error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    {
	error_code = MPIO_Err_create_code(MPI_SUCCESS, MPIR_ERR_FATAL,
					  myname, __LINE__, MPI_ERR_INTERN, 
					  "**iosharedfailed", 0);
	error_code = MPIO_Err_return_file(fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    if (buftype_is_contig && filetype_is_contig)
    {
        /* convert bufocunt and shared_fp to bytes */
	bufsize = datatype_size * count;
	off = fh->disp + fh->etype_size * shared_fp;

        /* if atomic mode requested, lock (exclusive) the region, because there
           could be a concurrent noncontiguous request. On NFS, locking is 
           done in the ADIO_WriteContig.*/

        if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
            ADIOI_WRITE_LOCK(fh, off, SEEK_SET, bufsize);

	ADIO_WriteContig(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
		     off, status, &error_code); 

        if ((fh->atomicity) && (fh->file_system != ADIO_NFS))
            ADIOI_UNLOCK(fh, off, SEEK_SET, bufsize);
    }
    else
    {
	ADIO_WriteStrided(fh, buf, count, datatype, ADIO_EXPLICIT_OFFSET,
			 shared_fp, status, &error_code);
	/* For strided and atomic mode, locking is done in ADIO_WriteStrided */
    }

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(fh, error_code);
    /* --END ERROR HANDLING-- */

fn_exit:
    MPIR_Nest_decr();
    MPIU_THREAD_SINGLE_CS_EXIT("io");
    return error_code;
}
Ejemplo n.º 14
0
/*@
    MPI_File_read_shared - Read using shared file pointer

Input Parameters:
. fh - file handle (handle)
. count - number of elements in buffer (nonnegative integer)
. datatype - datatype of each buffer element (handle)

Output Parameters:
. buf - initial address of buffer (choice)
. status - status object (Status)

.N fortran
@*/
int MPI_File_read_shared(MPI_File fh, void *buf, int count,
			 MPI_Datatype datatype, MPI_Status *status)
{
    int error_code, buftype_is_contig, filetype_is_contig;
    static char myname[] = "MPI_FILE_READ_SHARED";
    MPI_Count datatype_size;
    ADIO_Offset off, shared_fp, incr, bufsize;
    ADIO_File adio_fh;
    void *xbuf=NULL, *e32_buf=NULL;

    ROMIO_THREAD_CS_ENTER();

    adio_fh = MPIO_File_resolve(fh);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_FILE_HANDLE(adio_fh, myname, error_code);
    MPIO_CHECK_COUNT(adio_fh, count, myname, error_code);
    MPIO_CHECK_DATATYPE(adio_fh, datatype, myname, error_code);
    /* --END ERROR HANDLING-- */

    MPI_Type_size_x(datatype, &datatype_size);

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_COUNT_SIZE(adio_fh, count, datatype_size, myname, error_code);
    /* --END ERROR HANDLING-- */

    if (count*datatype_size == 0)
    {
#ifdef HAVE_STATUS_SET_BYTES
	MPIR_Status_set_bytes(status, datatype, 0);
#endif
	error_code = MPI_SUCCESS;
	goto fn_exit;
    }

    /* --BEGIN ERROR HANDLING-- */
    MPIO_CHECK_INTEGRAL_ETYPE(adio_fh, count, datatype_size, myname, error_code);
    MPIO_CHECK_READABLE(adio_fh, myname, error_code);
    MPIO_CHECK_FS_SUPPORTS_SHARED(adio_fh, myname, error_code);
    /* --END ERROR HANDLING-- */

    ADIOI_Datatype_iscontig(datatype, &buftype_is_contig);
    ADIOI_Datatype_iscontig(adio_fh->filetype, &filetype_is_contig);

    ADIOI_TEST_DEFERRED(adio_fh, myname, &error_code);

    incr = (count*datatype_size)/adio_fh->etype_size;

    ADIO_Get_shared_fp(adio_fh, incr, &shared_fp, &error_code);
    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
    {
        error_code = MPIO_Err_return_file(adio_fh, error_code);
	goto fn_exit;
    }
    /* --END ERROR HANDLING-- */

    xbuf = buf;
    if (adio_fh->is_external32)
    {
        MPI_Aint e32_size = 0;
        error_code = MPIU_datatype_full_size(datatype, &e32_size);
        if (error_code != MPI_SUCCESS)
            goto fn_exit;

        e32_buf = ADIOI_Malloc(e32_size*count);
	xbuf = e32_buf;
    }

    /* contiguous or strided? */
    if (buftype_is_contig && filetype_is_contig)
    {
	/* convert count and shared_fp to bytes */
        bufsize = datatype_size * count;
        off = adio_fh->disp + adio_fh->etype_size * shared_fp;

        /* if atomic mode requested, lock (exclusive) the region, because there
           could be a concurrent noncontiguous request. On NFS, locking 
           is done in the ADIO_ReadContig.*/

        if ((adio_fh->atomicity) && (adio_fh->file_system != ADIO_NFS))
            ADIOI_WRITE_LOCK(adio_fh, off, SEEK_SET, bufsize);

        ADIO_ReadContig(adio_fh, xbuf, count, datatype, ADIO_EXPLICIT_OFFSET,
                        off, status, &error_code); 

        if ((adio_fh->atomicity) && (adio_fh->file_system != ADIO_NFS))
            ADIOI_UNLOCK(adio_fh, off, SEEK_SET, bufsize);
    }
    else
    {
	ADIO_ReadStrided(adio_fh, xbuf, count, datatype, ADIO_EXPLICIT_OFFSET,
                          shared_fp, status, &error_code);
	/* For strided and atomic mode, locking is done in ADIO_ReadStrided */
    }

    /* --BEGIN ERROR HANDLING-- */
    if (error_code != MPI_SUCCESS)
	error_code = MPIO_Err_return_file(adio_fh, error_code);
    /* --END ERROR HANDLING-- */

    if (e32_buf != NULL) {
        error_code = MPIU_read_external32_conversion_fn(buf, datatype,
                count, e32_buf);
	ADIOI_Free(e32_buf);
    }
fn_exit:
    ROMIO_THREAD_CS_EXIT();

    return error_code;
}