/*
** An attack against RSA CRT was described by Boneh, DeMillo, and Lipton in:
** "On the Importance of Eliminating Errors in Cryptographic Computations",
** http://theory.stanford.edu/~dabo/papers/faults.ps.gz
**
** As a defense against the attack, carry out the private key operation,
** followed up with a public key operation to invert the result.
** Verify that result against the input.
*/
static SECStatus
rsa_PrivateKeyOpCRTCheckedPubKey(RSAPrivateKey *key, mp_int *m, mp_int *c)
{
mp_int n, e, v;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
MP_DIGITS(&n) = 0;
MP_DIGITS(&e) = 0;
MP_DIGITS(&v) = 0;
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&v) );
CHECK_SEC_OK( rsa_PrivateKeyOpCRTNoCheck(key, m, c) );
SECITEM_TO_MPINT(key->modulus, &n);
SECITEM_TO_MPINT(key->publicExponent, &e);
/* Perform a public key operation v = m ** e mod n */
CHECK_MPI_OK( mp_exptmod(m, &e, &n, &v) );
if (mp_cmp(&v, c) != 0) {
rv = SECFailure;
}
cleanup:
mp_clear(&n);
mp_clear(&e);
mp_clear(&v);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
static SECStatus
generate_prime(mp_int *prime, int primeLen)
{
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
unsigned long counter = 0;
int piter;
unsigned char *pb = NULL;
pb = PORT_Alloc(primeLen);
if (!pb) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
for (piter = 0; piter < MAX_PRIME_GEN_ATTEMPTS; piter++) {
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(pb, primeLen) );
pb[0] |= 0xC0; /* set two high-order bits */
pb[primeLen-1] |= 0x01; /* set low-order bit */
CHECK_MPI_OK( mp_read_unsigned_octets(prime, pb, primeLen) );
err = mpp_make_prime(prime, primeLen * 8, PR_FALSE, &counter);
if (err != MP_NO)
goto cleanup;
/* keep going while err == MP_NO */
}
cleanup:
if (pb)
PORT_ZFree(pb, primeLen);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/*
** RSA Private key operation using CRT.
*/
static SECStatus
rsa_PrivateKeyOpCRTNoCheck(RSAPrivateKey *key, mp_int *m, mp_int *c)
{
mp_int p, q, d_p, d_q, qInv;
mp_int m1, m2, h, ctmp;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&d_p) = 0;
MP_DIGITS(&d_q) = 0;
MP_DIGITS(&qInv) = 0;
MP_DIGITS(&m1) = 0;
MP_DIGITS(&m2) = 0;
MP_DIGITS(&h) = 0;
MP_DIGITS(&ctmp) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&d_p) );
CHECK_MPI_OK( mp_init(&d_q) );
CHECK_MPI_OK( mp_init(&qInv) );
CHECK_MPI_OK( mp_init(&m1) );
CHECK_MPI_OK( mp_init(&m2) );
CHECK_MPI_OK( mp_init(&h) );
CHECK_MPI_OK( mp_init(&ctmp) );
/* copy private key parameters into mp integers */
SECITEM_TO_MPINT(key->prime1, &p); /* p */
SECITEM_TO_MPINT(key->prime2, &q); /* q */
SECITEM_TO_MPINT(key->exponent1, &d_p); /* d_p = d mod (p-1) */
SECITEM_TO_MPINT(key->exponent2, &d_q); /* d_q = d mod (q-1) */
SECITEM_TO_MPINT(key->coefficient, &qInv); /* qInv = q**-1 mod p */
/* 1. m1 = c**d_p mod p */
CHECK_MPI_OK( mp_mod(c, &p, &ctmp) );
CHECK_MPI_OK( mp_exptmod(&ctmp, &d_p, &p, &m1) );
/* 2. m2 = c**d_q mod q */
CHECK_MPI_OK( mp_mod(c, &q, &ctmp) );
CHECK_MPI_OK( mp_exptmod(&ctmp, &d_q, &q, &m2) );
/* 3. h = (m1 - m2) * qInv mod p */
CHECK_MPI_OK( mp_submod(&m1, &m2, &p, &h) );
CHECK_MPI_OK( mp_mulmod(&h, &qInv, &p, &h) );
/* 4. m = m2 + h * q */
CHECK_MPI_OK( mp_mul(&h, &q, m) );
CHECK_MPI_OK( mp_add(m, &m2, m) );
cleanup:
mp_clear(&p);
mp_clear(&q);
mp_clear(&d_p);
mp_clear(&d_q);
mp_clear(&qInv);
mp_clear(&m1);
mp_clear(&m2);
mp_clear(&h);
mp_clear(&ctmp);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/* Generate a random private key using the algorithm A.4.1 of ANSI X9.62,
* modified a la FIPS 186-2 Change Notice 1 to eliminate the bias in the
* random number generator.
*
* Parameters
* - order: a buffer that holds the curve's group order
* - len: the length in octets of the order buffer
* - random: a buffer of 2 * len random bytes
* - randomlen: the length in octets of the random buffer
*
* Return Value
* Returns a buffer of len octets that holds the private key. The caller
* is responsible for freeing the buffer with PORT_ZFree.
*/
static unsigned char *
ec_GenerateRandomPrivateKey(const unsigned char *order, int len,
const unsigned char *random, int randomlen, int kmflag)
{
SECStatus rv = SECSuccess;
mp_err err;
unsigned char *privKeyBytes = NULL;
mp_int privKeyVal, order_1, one;
MP_DIGITS(&privKeyVal) = 0;
MP_DIGITS(&order_1) = 0;
MP_DIGITS(&one) = 0;
CHECK_MPI_OK( mp_init(&privKeyVal, kmflag) );
CHECK_MPI_OK( mp_init(&order_1, kmflag) );
CHECK_MPI_OK( mp_init(&one, kmflag) );
/*
* Reduces the 2*len buffer of random bytes modulo the group order.
*/
if ((privKeyBytes = PORT_Alloc(2*len, kmflag)) == NULL) goto cleanup;
if (randomlen != 2 * len) {
randomlen = 2 * len;
}
/* No need to generate - random bytes are now supplied */
/* CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(privKeyBytes, 2*len) );*/
memcpy(privKeyBytes, random, randomlen);
CHECK_MPI_OK( mp_read_unsigned_octets(&privKeyVal, privKeyBytes, 2*len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&order_1, order, len) );
CHECK_MPI_OK( mp_set_int(&one, 1) );
CHECK_MPI_OK( mp_sub(&order_1, &one, &order_1) );
CHECK_MPI_OK( mp_mod(&privKeyVal, &order_1, &privKeyVal) );
CHECK_MPI_OK( mp_add(&privKeyVal, &one, &privKeyVal) );
CHECK_MPI_OK( mp_to_fixlen_octets(&privKeyVal, privKeyBytes, len) );
memset(privKeyBytes+len, 0, len);
cleanup:
mp_clear(&privKeyVal);
mp_clear(&order_1);
mp_clear(&one);
if (err < MP_OKAY) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv != SECSuccess && privKeyBytes) {
#ifdef _KERNEL
kmem_free(privKeyBytes, 2*len);
#else
free(privKeyBytes);
#endif
privKeyBytes = NULL;
}
return privKeyBytes;
}
/* Generate a random private key using the algorithm A.4.1 of ANSI X9.62,
* modified a la FIPS 186-2 Change Notice 1 to eliminate the bias in the
* random number generator.
*
* Parameters
* - order: a buffer that holds the curve's group order
* - len: the length in octets of the order buffer
*
* Return Value
* Returns a buffer of len octets that holds the private key. The caller
* is responsible for freeing the buffer with PORT_ZFree.
*/
static unsigned char *
ec_GenerateRandomPrivateKey(const unsigned char *order, int len, int kmflag)
{
SECStatus rv = SECSuccess;
mp_err err;
unsigned char *privKeyBytes = NULL;
mp_int privKeyVal, order_1, one;
MP_DIGITS(&privKeyVal) = 0;
MP_DIGITS(&order_1) = 0;
MP_DIGITS(&one) = 0;
CHECK_MPI_OK( mp_init(&privKeyVal) );
CHECK_MPI_OK( mp_init(&order_1) );
CHECK_MPI_OK( mp_init(&one) );
/* Generates 2*len random bytes using the global random bit generator
* (which implements Algorithm 1 of FIPS 186-2 Change Notice 1) then
* reduces modulo the group order.
*/
if ((privKeyBytes = PORT_Alloc(2*len, kmflag)) == NULL) goto cleanup;
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(privKeyBytes, 2*len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&privKeyVal, privKeyBytes, 2*len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&order_1, order, len) );
CHECK_MPI_OK( mp_set_int(&one, 1) );
CHECK_MPI_OK( mp_sub(&order_1, &one, &order_1) );
CHECK_MPI_OK( mp_mod(&privKeyVal, &order_1, &privKeyVal) );
CHECK_MPI_OK( mp_add(&privKeyVal, &one, &privKeyVal) );
CHECK_MPI_OK( mp_to_fixlen_octets(&privKeyVal, privKeyBytes, len) );
memset(privKeyBytes+len, 0, len);
cleanup:
mp_clear(&privKeyVal);
mp_clear(&order_1);
mp_clear(&one);
if (err < MP_OKAY) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv != SECSuccess && privKeyBytes) {
#ifdef _KERNEL
kmem_free(privKeyBytes, 2*len);
#else
free(privKeyBytes);
#endif
privKeyBytes = NULL;
}
return privKeyBytes;
}
/*
** RSA Private key operation (no CRT).
*/
static SECStatus
rsa_PrivateKeyOpNoCRT(RSAPrivateKey *key, mp_int *m, mp_int *c, mp_int *n,
unsigned int modLen)
{
mp_int d;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
MP_DIGITS(&d) = 0;
CHECK_MPI_OK( mp_init(&d) );
SECITEM_TO_MPINT(key->privateExponent, &d);
/* 1. m = c**d mod n */
CHECK_MPI_OK( mp_exptmod(c, &d, n, m) );
cleanup:
mp_clear(&d);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
static SECStatus
generate_blinding_params(struct RSABlindingParamsStr *rsabp,
RSAPrivateKey *key, mp_int *n, unsigned int modLen)
{
SECStatus rv = SECSuccess;
mp_int e, k;
mp_err err = MP_OKAY;
unsigned char *kb = NULL;
MP_DIGITS(&e) = 0;
MP_DIGITS(&k) = 0;
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&k) );
SECITEM_TO_MPINT(key->publicExponent, &e);
/* generate random k < n */
kb = PORT_Alloc(modLen);
if (!kb) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(kb, modLen) );
CHECK_MPI_OK( mp_read_unsigned_octets(&k, kb, modLen) );
/* k < n */
CHECK_MPI_OK( mp_mod(&k, n, &k) );
/* f = k**e mod n */
CHECK_MPI_OK( mp_exptmod(&k, &e, n, &rsabp->f) );
/* g = k**-1 mod n */
CHECK_MPI_OK( mp_invmod(&k, n, &rsabp->g) );
/* Initialize the counter for this (f, g) */
rsabp->counter = RSA_BLINDING_PARAMS_MAX_REUSE;
cleanup:
if (kb)
PORT_ZFree(kb, modLen);
mp_clear(&k);
mp_clear(&e);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
static SECStatus
generate_blinding_params(RSAPrivateKey *key, mp_int* f, mp_int* g, mp_int *n,
unsigned int modLen)
{
SECStatus rv = SECSuccess;
mp_int e, k;
mp_err err = MP_OKAY;
unsigned char *kb = NULL;
MP_DIGITS(&e) = 0;
MP_DIGITS(&k) = 0;
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&k) );
SECITEM_TO_MPINT(key->publicExponent, &e);
/* generate random k < n */
kb = PORT_Alloc(modLen);
if (!kb) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(kb, modLen) );
CHECK_MPI_OK( mp_read_unsigned_octets(&k, kb, modLen) );
/* k < n */
CHECK_MPI_OK( mp_mod(&k, n, &k) );
/* f = k**e mod n */
CHECK_MPI_OK( mp_exptmod(&k, &e, n, f) );
/* g = k**-1 mod n */
CHECK_MPI_OK( mp_invmod(&k, n, g) );
cleanup:
if (kb)
PORT_ZFree(kb, modLen);
mp_clear(&k);
mp_clear(&e);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/*
* FIPS 186-2 requires result from random output to be reduced mod q when
* generating random numbers for DSA.
*
* Input: w, 2*qLen bytes
* q, qLen bytes
* Output: xj, qLen bytes
*/
static SECStatus
fips186Change_ReduceModQForDSA(const PRUint8 *w, const PRUint8 *q,
unsigned int qLen, PRUint8 * xj)
{
mp_int W, Q, Xj;
mp_err err;
SECStatus rv = SECSuccess;
/* Initialize MPI integers. */
MP_DIGITS(&W) = 0;
MP_DIGITS(&Q) = 0;
MP_DIGITS(&Xj) = 0;
CHECK_MPI_OK( mp_init(&W) );
CHECK_MPI_OK( mp_init(&Q) );
CHECK_MPI_OK( mp_init(&Xj) );
/*
* Convert input arguments into MPI integers.
*/
CHECK_MPI_OK( mp_read_unsigned_octets(&W, w, 2*qLen) );
CHECK_MPI_OK( mp_read_unsigned_octets(&Q, q, qLen) );
/*
* Algorithm 1 of FIPS 186-2 Change Notice 1, Step 3.3
*
* xj = (w0 || w1) mod q
*/
CHECK_MPI_OK( mp_mod(&W, &Q, &Xj) );
CHECK_MPI_OK( mp_to_fixlen_octets(&Xj, xj, qLen) );
cleanup:
mp_clear(&W);
mp_clear(&Q);
mp_clear(&Xj);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
PRBool
KEA_Verify(SECItem *Y, SECItem *prime, SECItem *subPrime)
{
mp_int p, q, y, r;
mp_err err;
int cmp = 1; /* default is false */
if (!Y || !prime || !subPrime) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&y) = 0;
MP_DIGITS(&r) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&y) );
CHECK_MPI_OK( mp_init(&r) );
SECITEM_TO_MPINT(*prime, &p);
SECITEM_TO_MPINT(*subPrime, &q);
SECITEM_TO_MPINT(*Y, &y);
/* compute r = y**q mod p */
CHECK_MPI_OK( mp_exptmod(&y, &q, &p, &r) );
/* compare to 1 */
cmp = mp_cmp_d(&r, 1);
cleanup:
mp_clear(&p);
mp_clear(&q);
mp_clear(&y);
mp_clear(&r);
if (err) {
MP_TO_SEC_ERROR(err);
return PR_FALSE;
}
return (cmp == 0) ? PR_TRUE : PR_FALSE;
}
static SECStatus
init_blinding_params(struct RSABlindingParamsStr *rsabp, RSAPrivateKey *key,
mp_int *n, unsigned int modLen)
{
SECStatus rv = SECSuccess;
mp_err err = MP_OKAY;
MP_DIGITS(&rsabp->f) = 0;
MP_DIGITS(&rsabp->g) = 0;
/* initialize blinding parameters */
CHECK_MPI_OK( mp_init(&rsabp->f) );
CHECK_MPI_OK( mp_init(&rsabp->g) );
/* List elements are keyed using the modulus */
SECITEM_CopyItem(NULL, &rsabp->modulus, &key->modulus);
CHECK_SEC_OK( generate_blinding_params(rsabp, key, n, modLen) );
return SECSuccess;
cleanup:
mp_clear(&rsabp->f);
mp_clear(&rsabp->g);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
SECStatus
DH_Derive(SECItem *publicValue,
SECItem *prime,
SECItem *privateValue,
SECItem *derivedSecret,
unsigned int outBytes)
{
mp_int p, Xa, Yb, ZZ, psub1;
mp_err err = MP_OKAY;
unsigned int len = 0;
unsigned int nb;
unsigned char *secret = NULL;
if (!publicValue || !prime || !privateValue || !derivedSecret) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
memset(derivedSecret, 0, sizeof *derivedSecret);
MP_DIGITS(&p) = 0;
MP_DIGITS(&Xa) = 0;
MP_DIGITS(&Yb) = 0;
MP_DIGITS(&ZZ) = 0;
MP_DIGITS(&psub1) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&Xa) );
CHECK_MPI_OK( mp_init(&Yb) );
CHECK_MPI_OK( mp_init(&ZZ) );
CHECK_MPI_OK( mp_init(&psub1) );
SECITEM_TO_MPINT(*publicValue, &Yb);
SECITEM_TO_MPINT(*privateValue, &Xa);
SECITEM_TO_MPINT(*prime, &p);
CHECK_MPI_OK( mp_sub_d(&p, 1, &psub1) );
/* We assume that the modulus, p, is a safe prime. That is, p = 2q+1 where
* q is also a prime. Thus the orders of the subgroups are factors of 2q:
* namely 1, 2, q and 2q.
*
* We check that the peer's public value isn't zero (which isn't in the
* group), one (subgroup of order one) or p-1 (subgroup of order 2). We
* also check that the public value is less than p, to avoid being fooled
* by values like p+1 or 2*p-1.
*
* Thus we must be operating in the subgroup of size q or 2q. */
if (mp_cmp_d(&Yb, 1) <= 0 ||
mp_cmp(&Yb, &psub1) >= 0) {
err = MP_BADARG;
goto cleanup;
}
/* ZZ = (Yb)**Xa mod p */
CHECK_MPI_OK( mp_exptmod(&Yb, &Xa, &p, &ZZ) );
/* number of bytes in the derived secret */
len = mp_unsigned_octet_size(&ZZ);
if (len <= 0) {
err = MP_BADARG;
goto cleanup;
}
/*
* We check to make sure that ZZ is not equal to 1 or -1 mod p.
* This helps guard against small subgroup attacks, since an attacker
* using a subgroup of size N will produce 1 or -1 with probability 1/N.
* When the protocol is executed within a properly large subgroup, the
* probability of this result will be negligibly small. For example,
* with a strong prime of the form 2p+1, the probability will be 1/p.
*
* We return MP_BADARG because this is probably the result of a bad
* public value or a bad prime having been provided.
*/
if (mp_cmp_d(&ZZ, 1) == 0 ||
mp_cmp(&ZZ, &psub1) == 0) {
err = MP_BADARG;
goto cleanup;
}
/* allocate a buffer which can hold the entire derived secret. */
secret = PORT_Alloc(len);
if (secret == NULL) {
err = MP_MEM;
goto cleanup;
}
/* grab the derived secret */
err = mp_to_unsigned_octets(&ZZ, secret, len);
if (err >= 0) err = MP_OKAY;
/*
** if outBytes is 0 take all of the bytes from the derived secret.
** if outBytes is not 0 take exactly outBytes from the derived secret, zero
** pad at the beginning if necessary, and truncate beginning bytes
** if necessary.
*/
if (outBytes > 0)
nb = outBytes;
else
nb = len;
if (SECITEM_AllocItem(NULL, derivedSecret, nb) == NULL) {
err = MP_MEM;
goto cleanup;
}
if (len < nb) {
unsigned int offset = nb - len;
memset(derivedSecret->data, 0, offset);
memcpy(derivedSecret->data + offset, secret, len);
} else {
memcpy(derivedSecret->data, secret + len - nb, nb);
}
cleanup:
mp_clear(&p);
mp_clear(&Xa);
mp_clear(&Yb);
mp_clear(&ZZ);
mp_clear(&psub1);
if (secret) {
/* free the buffer allocated for the full secret. */
PORT_ZFree(secret, len);
}
if (err) {
MP_TO_SEC_ERROR(err);
if (derivedSecret->data)
PORT_ZFree(derivedSecret->data, derivedSecret->len);
return SECFailure;
}
return SECSuccess;
}
SECStatus
KEA_Derive(SECItem *prime,
SECItem *public1,
SECItem *public2,
SECItem *private1,
SECItem *private2,
SECItem *derivedSecret)
{
mp_int p, Y, R, r, x, t, u, w;
mp_err err;
unsigned char *secret = NULL;
unsigned int len = 0, offset;
if (!prime || !public1 || !public2 || !private1 || !private2 ||
!derivedSecret) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
memset(derivedSecret, 0, sizeof *derivedSecret);
MP_DIGITS(&p) = 0;
MP_DIGITS(&Y) = 0;
MP_DIGITS(&R) = 0;
MP_DIGITS(&r) = 0;
MP_DIGITS(&x) = 0;
MP_DIGITS(&t) = 0;
MP_DIGITS(&u) = 0;
MP_DIGITS(&w) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&Y) );
CHECK_MPI_OK( mp_init(&R) );
CHECK_MPI_OK( mp_init(&r) );
CHECK_MPI_OK( mp_init(&x) );
CHECK_MPI_OK( mp_init(&t) );
CHECK_MPI_OK( mp_init(&u) );
CHECK_MPI_OK( mp_init(&w) );
SECITEM_TO_MPINT(*prime, &p);
SECITEM_TO_MPINT(*public1, &Y);
SECITEM_TO_MPINT(*public2, &R);
SECITEM_TO_MPINT(*private1, &r);
SECITEM_TO_MPINT(*private2, &x);
/* t = DH(Y, r, p) = Y ** r mod p */
CHECK_MPI_OK( mp_exptmod(&Y, &r, &p, &t) );
/* u = DH(R, x, p) = R ** x mod p */
CHECK_MPI_OK( mp_exptmod(&R, &x, &p, &u) );
/* w = (t + u) mod p */
CHECK_MPI_OK( mp_addmod(&t, &u, &p, &w) );
/* allocate a buffer for the full derived secret */
len = mp_unsigned_octet_size(&w);
secret = PORT_Alloc(len);
if (secret == NULL) {
err = MP_MEM;
goto cleanup;
}
/* grab the secret */
err = mp_to_unsigned_octets(&w, secret, len);
if (err > 0) err = MP_OKAY;
/* allocate output buffer */
if (SECITEM_AllocItem(NULL, derivedSecret, KEA_DERIVED_SECRET_LEN)
== NULL) {
err = MP_MEM;
goto cleanup;
}
memset(derivedSecret->data, 0, derivedSecret->len);
/* copy in the 128 lsb of the secret */
if (len >= KEA_DERIVED_SECRET_LEN) {
memcpy(derivedSecret->data, secret + (len - KEA_DERIVED_SECRET_LEN),
KEA_DERIVED_SECRET_LEN);
} else {
offset = KEA_DERIVED_SECRET_LEN - len;
memcpy(derivedSecret->data + offset, secret, len);
}
cleanup:
mp_clear(&p);
mp_clear(&Y);
mp_clear(&R);
mp_clear(&r);
mp_clear(&x);
mp_clear(&t);
mp_clear(&u);
mp_clear(&w);
if (secret)
PORT_ZFree(secret, len);
if (err) {
MP_TO_SEC_ERROR(err);
if (derivedSecret->data)
PORT_ZFree(derivedSecret->data, derivedSecret->len);
return SECFailure;
}
return SECSuccess;
}
static SECStatus
rsa_build_from_primes(mp_int *p, mp_int *q,
mp_int *e, PRBool needPublicExponent,
mp_int *d, PRBool needPrivateExponent,
RSAPrivateKey *key, unsigned int keySizeInBits)
{
mp_int n, phi;
mp_int psub1, qsub1, tmp;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
MP_DIGITS(&n) = 0;
MP_DIGITS(&phi) = 0;
MP_DIGITS(&psub1) = 0;
MP_DIGITS(&qsub1) = 0;
MP_DIGITS(&tmp) = 0;
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&phi) );
CHECK_MPI_OK( mp_init(&psub1) );
CHECK_MPI_OK( mp_init(&qsub1) );
CHECK_MPI_OK( mp_init(&tmp) );
/* 1. Compute n = p*q */
CHECK_MPI_OK( mp_mul(p, q, &n) );
/* verify that the modulus has the desired number of bits */
if ((unsigned)mpl_significant_bits(&n) != keySizeInBits) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
rv = SECFailure;
goto cleanup;
}
/* at least one exponent must be given */
PORT_Assert(!(needPublicExponent && needPrivateExponent));
/* 2. Compute phi = (p-1)*(q-1) */
CHECK_MPI_OK( mp_sub_d(p, 1, &psub1) );
CHECK_MPI_OK( mp_sub_d(q, 1, &qsub1) );
if (needPublicExponent || needPrivateExponent) {
CHECK_MPI_OK( mp_mul(&psub1, &qsub1, &phi) );
/* 3. Compute d = e**-1 mod(phi) */
/* or e = d**-1 mod(phi) as necessary */
if (needPublicExponent) {
err = mp_invmod(d, &phi, e);
} else {
err = mp_invmod(e, &phi, d);
}
} else {
err = MP_OKAY;
}
/* Verify that phi(n) and e have no common divisors */
if (err != MP_OKAY) {
if (err == MP_UNDEF) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
err = MP_OKAY; /* to keep PORT_SetError from being called again */
rv = SECFailure;
}
goto cleanup;
}
/* 4. Compute exponent1 = d mod (p-1) */
CHECK_MPI_OK( mp_mod(d, &psub1, &tmp) );
MPINT_TO_SECITEM(&tmp, &key->exponent1, key->arena);
/* 5. Compute exponent2 = d mod (q-1) */
CHECK_MPI_OK( mp_mod(d, &qsub1, &tmp) );
MPINT_TO_SECITEM(&tmp, &key->exponent2, key->arena);
/* 6. Compute coefficient = q**-1 mod p */
CHECK_MPI_OK( mp_invmod(q, p, &tmp) );
MPINT_TO_SECITEM(&tmp, &key->coefficient, key->arena);
/* copy our calculated results, overwrite what is there */
key->modulus.data = NULL;
MPINT_TO_SECITEM(&n, &key->modulus, key->arena);
key->privateExponent.data = NULL;
MPINT_TO_SECITEM(d, &key->privateExponent, key->arena);
key->publicExponent.data = NULL;
MPINT_TO_SECITEM(e, &key->publicExponent, key->arena);
key->prime1.data = NULL;
MPINT_TO_SECITEM(p, &key->prime1, key->arena);
key->prime2.data = NULL;
MPINT_TO_SECITEM(q, &key->prime2, key->arena);
cleanup:
mp_clear(&n);
mp_clear(&phi);
mp_clear(&psub1);
mp_clear(&qsub1);
mp_clear(&tmp);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
SECStatus
DH_NewKey(DHParams *params, DHPrivateKey **privKey)
{
PLArenaPool *arena;
DHPrivateKey *key;
mp_int g, xa, p, Ya;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
if (!params || !privKey) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
arena = PORT_NewArena(NSS_FREEBL_DEFAULT_CHUNKSIZE);
if (!arena) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
return SECFailure;
}
key = (DHPrivateKey *)PORT_ArenaZAlloc(arena, sizeof(DHPrivateKey));
if (!key) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
PORT_FreeArena(arena, PR_TRUE);
return SECFailure;
}
key->arena = arena;
MP_DIGITS(&g) = 0;
MP_DIGITS(&xa) = 0;
MP_DIGITS(&p) = 0;
MP_DIGITS(&Ya) = 0;
CHECK_MPI_OK( mp_init(&g) );
CHECK_MPI_OK( mp_init(&xa) );
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&Ya) );
/* Set private key's p */
CHECK_SEC_OK( SECITEM_CopyItem(arena, &key->prime, ¶ms->prime) );
SECITEM_TO_MPINT(key->prime, &p);
/* Set private key's g */
CHECK_SEC_OK( SECITEM_CopyItem(arena, &key->base, ¶ms->base) );
SECITEM_TO_MPINT(key->base, &g);
/* Generate private key xa */
SECITEM_AllocItem(arena, &key->privateValue,
dh_GetSecretKeyLen(params->prime.len));
CHECK_SEC_OK(RNG_GenerateGlobalRandomBytes(key->privateValue.data,
key->privateValue.len));
SECITEM_TO_MPINT( key->privateValue, &xa );
/* xa < p */
CHECK_MPI_OK( mp_mod(&xa, &p, &xa) );
/* Compute public key Ya = g ** xa mod p */
CHECK_MPI_OK( mp_exptmod(&g, &xa, &p, &Ya) );
MPINT_TO_SECITEM(&Ya, &key->publicValue, key->arena);
*privKey = key;
cleanup:
mp_clear(&g);
mp_clear(&xa);
mp_clear(&p);
mp_clear(&Ya);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv) {
*privKey = NULL;
PORT_FreeArena(arena, PR_TRUE);
}
return rv;
}
SECStatus
DH_Derive(SECItem *publicValue,
SECItem *prime,
SECItem *privateValue,
SECItem *derivedSecret,
unsigned int outBytes)
{
mp_int p, Xa, Yb, ZZ;
mp_err err = MP_OKAY;
int len = 0;
unsigned int nb;
unsigned char *secret = NULL;
if (!publicValue || !prime || !privateValue || !derivedSecret) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
memset(derivedSecret, 0, sizeof *derivedSecret);
MP_DIGITS(&p) = 0;
MP_DIGITS(&Xa) = 0;
MP_DIGITS(&Yb) = 0;
MP_DIGITS(&ZZ) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&Xa) );
CHECK_MPI_OK( mp_init(&Yb) );
CHECK_MPI_OK( mp_init(&ZZ) );
SECITEM_TO_MPINT(*publicValue, &Yb);
SECITEM_TO_MPINT(*privateValue, &Xa);
SECITEM_TO_MPINT(*prime, &p);
/* ZZ = (Yb)**Xa mod p */
CHECK_MPI_OK( mp_exptmod(&Yb, &Xa, &p, &ZZ) );
/* number of bytes in the derived secret */
len = mp_unsigned_octet_size(&ZZ);
if (len <= 0) {
err = MP_BADARG;
goto cleanup;
}
/* allocate a buffer which can hold the entire derived secret. */
secret = PORT_Alloc(len);
/* grab the derived secret */
err = mp_to_unsigned_octets(&ZZ, secret, len);
if (err >= 0) err = MP_OKAY;
/*
** if outBytes is 0 take all of the bytes from the derived secret.
** if outBytes is not 0 take exactly outBytes from the derived secret, zero
** pad at the beginning if necessary, and truncate beginning bytes
** if necessary.
*/
if (outBytes > 0)
nb = outBytes;
else
nb = len;
SECITEM_AllocItem(NULL, derivedSecret, nb);
if (len < nb) {
unsigned int offset = nb - len;
memset(derivedSecret->data, 0, offset);
memcpy(derivedSecret->data + offset, secret, len);
} else {
memcpy(derivedSecret->data, secret + len - nb, nb);
}
cleanup:
mp_clear(&p);
mp_clear(&Xa);
mp_clear(&Yb);
mp_clear(&ZZ);
if (secret) {
/* free the buffer allocated for the full secret. */
PORT_ZFree(secret, len);
}
if (err) {
MP_TO_SEC_ERROR(err);
if (derivedSecret->data)
PORT_ZFree(derivedSecret->data, derivedSecret->len);
return SECFailure;
}
return SECSuccess;
}
/* Computes the ECDSA signature (a concatenation of two values r and s)
* on the digest using the given key and the random value kb (used in
* computing s).
*/
SECStatus
ECDSA_SignDigestWithSeed(ECPrivateKey *key, SECItem *signature,
const SECItem *digest, const unsigned char *kb, const int kblen, int kmflag)
{
SECStatus rv = SECFailure;
mp_int x1;
mp_int d, k; /* private key, random integer */
mp_int r, s; /* tuple (r, s) is the signature */
mp_int n;
mp_err err = MP_OKAY;
ECParams *ecParams = NULL;
SECItem kGpoint = { siBuffer, NULL, 0};
int flen = 0; /* length in bytes of the field size */
unsigned olen; /* length in bytes of the base point order */
#if EC_DEBUG
char mpstr[256];
#endif
/* Initialize MPI integers. */
/* must happen before the first potential call to cleanup */
MP_DIGITS(&x1) = 0;
MP_DIGITS(&d) = 0;
MP_DIGITS(&k) = 0;
MP_DIGITS(&r) = 0;
MP_DIGITS(&s) = 0;
MP_DIGITS(&n) = 0;
/* Check args */
if (!key || !signature || !digest || !kb || (kblen < 0)) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
goto cleanup;
}
ecParams = &(key->ecParams);
flen = (ecParams->fieldID.size + 7) >> 3;
olen = ecParams->order.len;
if (signature->data == NULL) {
/* a call to get the signature length only */
goto finish;
}
if (signature->len < 2*olen) {
PORT_SetError(SEC_ERROR_OUTPUT_LEN);
rv = SECBufferTooSmall;
goto cleanup;
}
CHECK_MPI_OK( mp_init(&x1, kmflag) );
CHECK_MPI_OK( mp_init(&d, kmflag) );
CHECK_MPI_OK( mp_init(&k, kmflag) );
CHECK_MPI_OK( mp_init(&r, kmflag) );
CHECK_MPI_OK( mp_init(&s, kmflag) );
CHECK_MPI_OK( mp_init(&n, kmflag) );
SECITEM_TO_MPINT( ecParams->order, &n );
SECITEM_TO_MPINT( key->privateValue, &d );
CHECK_MPI_OK( mp_read_unsigned_octets(&k, kb, kblen) );
/* Make sure k is in the interval [1, n-1] */
if ((mp_cmp_z(&k) <= 0) || (mp_cmp(&k, &n) >= 0)) {
#if EC_DEBUG
printf("k is outside [1, n-1]\n");
mp_tohex(&k, mpstr);
printf("k : %s \n", mpstr);
mp_tohex(&n, mpstr);
printf("n : %s \n", mpstr);
#endif
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
* Using an equivalent exponent of fixed length (same as n or 1 bit less
* than n) to keep the kG timing relatively constant.
*
* Note that this is an extra step on top of the approach defined in
* ANSI X9.62 so as to make a fixed length K.
*/
CHECK_MPI_OK( mp_add(&k, &n, &k) );
CHECK_MPI_OK( mp_div_2(&k, &k) );
/*
** ANSI X9.62, Section 5.3.2, Step 2
**
** Compute kG
*/
kGpoint.len = 2*flen + 1;
kGpoint.data = PORT_Alloc(2*flen + 1, kmflag);
if ((kGpoint.data == NULL) ||
(ec_points_mul(ecParams, &k, NULL, NULL, &kGpoint, kmflag)
!= SECSuccess))
goto cleanup;
/*
** ANSI X9.62, Section 5.3.3, Step 1
**
** Extract the x co-ordinate of kG into x1
*/
CHECK_MPI_OK( mp_read_unsigned_octets(&x1, kGpoint.data + 1,
(mp_size) flen) );
/*
** ANSI X9.62, Section 5.3.3, Step 2
**
** r = x1 mod n NOTE: n is the order of the curve
*/
CHECK_MPI_OK( mp_mod(&x1, &n, &r) );
/*
** ANSI X9.62, Section 5.3.3, Step 3
**
** verify r != 0
*/
if (mp_cmp_z(&r) == 0) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
** ANSI X9.62, Section 5.3.3, Step 4
**
** s = (k**-1 * (HASH(M) + d*r)) mod n
*/
SECITEM_TO_MPINT(*digest, &s); /* s = HASH(M) */
/* In the definition of EC signing, digests are truncated
* to the length of n in bits.
* (see SEC 1 "Elliptic Curve Digit Signature Algorithm" section 4.1.*/
if (digest->len*8 > (unsigned int)ecParams->fieldID.size) {
mpl_rsh(&s,&s,digest->len*8 - ecParams->fieldID.size);
}
#if EC_DEBUG
mp_todecimal(&n, mpstr);
printf("n : %s (dec)\n", mpstr);
mp_todecimal(&d, mpstr);
printf("d : %s (dec)\n", mpstr);
mp_tohex(&x1, mpstr);
printf("x1: %s\n", mpstr);
mp_todecimal(&s, mpstr);
printf("digest: %s (decimal)\n", mpstr);
mp_todecimal(&r, mpstr);
printf("r : %s (dec)\n", mpstr);
mp_tohex(&r, mpstr);
printf("r : %s\n", mpstr);
#endif
CHECK_MPI_OK( mp_invmod(&k, &n, &k) ); /* k = k**-1 mod n */
CHECK_MPI_OK( mp_mulmod(&d, &r, &n, &d) ); /* d = d * r mod n */
CHECK_MPI_OK( mp_addmod(&s, &d, &n, &s) ); /* s = s + d mod n */
CHECK_MPI_OK( mp_mulmod(&s, &k, &n, &s) ); /* s = s * k mod n */
#if EC_DEBUG
mp_todecimal(&s, mpstr);
printf("s : %s (dec)\n", mpstr);
mp_tohex(&s, mpstr);
printf("s : %s\n", mpstr);
#endif
/*
** ANSI X9.62, Section 5.3.3, Step 5
**
** verify s != 0
*/
if (mp_cmp_z(&s) == 0) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
**
** Signature is tuple (r, s)
*/
CHECK_MPI_OK( mp_to_fixlen_octets(&r, signature->data, olen) );
CHECK_MPI_OK( mp_to_fixlen_octets(&s, signature->data + olen, olen) );
finish:
signature->len = 2*olen;
rv = SECSuccess;
err = MP_OKAY;
cleanup:
mp_clear(&x1);
mp_clear(&d);
mp_clear(&k);
mp_clear(&r);
mp_clear(&s);
mp_clear(&n);
if (kGpoint.data) {
PORT_ZFree(kGpoint.data, 2*flen + 1);
}
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
#if EC_DEBUG
printf("ECDSA signing with seed %s\n",
(rv == SECSuccess) ? "succeeded" : "failed");
#endif
return rv;
}
static SECStatus
get_blinding_params(RSAPrivateKey *key, mp_int *n, unsigned int modLen,
mp_int *f, mp_int *g)
{
RSABlindingParams *rsabp = NULL;
blindingParams *bpUnlinked = NULL;
blindingParams *bp, *prevbp = NULL;
PRCList *el;
SECStatus rv = SECSuccess;
mp_err err = MP_OKAY;
int cmp = -1;
PRBool holdingLock = PR_FALSE;
do {
if (blindingParamsList.lock == NULL) {
PORT_SetError(SEC_ERROR_LIBRARY_FAILURE);
return SECFailure;
}
/* Acquire the list lock */
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
/* Walk the list looking for the private key */
for (el = PR_NEXT_LINK(&blindingParamsList.head);
el != &blindingParamsList.head;
el = PR_NEXT_LINK(el)) {
rsabp = (RSABlindingParams *)el;
cmp = SECITEM_CompareItem(&rsabp->modulus, &key->modulus);
if (cmp >= 0) {
/* The key is found or not in the list. */
break;
}
}
if (cmp) {
/* At this point, the key is not in the list. el should point to
** the list element before which this key should be inserted.
*/
rsabp = PORT_ZNew(RSABlindingParams);
if (!rsabp) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
goto cleanup;
}
rv = init_blinding_params(rsabp, key, n, modLen);
if (rv != SECSuccess) {
PORT_ZFree(rsabp, sizeof(RSABlindingParams));
goto cleanup;
}
/* Insert the new element into the list
** If inserting in the middle of the list, el points to the link
** to insert before. Otherwise, the link needs to be appended to
** the end of the list, which is the same as inserting before the
** head (since el would have looped back to the head).
*/
PR_INSERT_BEFORE(&rsabp->link, el);
}
/* We've found (or created) the RSAblindingParams struct for this key.
* Now, search its list of ready blinding params for a usable one.
*/
while (0 != (bp = rsabp->bp)) {
if (--(bp->counter) > 0) {
/* Found a match and there are still remaining uses left */
/* Return the parameters */
CHECK_MPI_OK( mp_copy(&bp->f, f) );
CHECK_MPI_OK( mp_copy(&bp->g, g) );
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* exhausted this one, give its values to caller, and
* then retire it.
*/
mp_exch(&bp->f, f);
mp_exch(&bp->g, g);
mp_clear( &bp->f );
mp_clear( &bp->g );
bp->counter = 0;
/* Move to free list */
rsabp->bp = bp->next;
bp->next = rsabp->free;
rsabp->free = bp;
/* In case there're threads waiting for new blinding
* value - notify 1 thread the value is ready
*/
if (blindingParamsList.waitCount > 0) {
PR_NotifyCondVar( blindingParamsList.cVar );
blindingParamsList.waitCount--;
}
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* We did not find a usable set of blinding params. Can we make one? */
/* Find a free bp struct. */
prevbp = NULL;
if ((bp = rsabp->free) != NULL) {
/* unlink this bp */
rsabp->free = bp->next;
bp->next = NULL;
bpUnlinked = bp; /* In case we fail */
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
/* generate blinding parameter values for the current thread */
CHECK_SEC_OK( generate_blinding_params(key, f, g, n, modLen ) );
/* put the blinding parameter values into cache */
CHECK_MPI_OK( mp_init( &bp->f) );
CHECK_MPI_OK( mp_init( &bp->g) );
CHECK_MPI_OK( mp_copy( f, &bp->f) );
CHECK_MPI_OK( mp_copy( g, &bp->g) );
/* Put this at head of queue of usable params. */
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
/* initialize RSABlindingParamsStr */
bp->counter = RSA_BLINDING_PARAMS_MAX_REUSE;
bp->next = rsabp->bp;
rsabp->bp = bp;
bpUnlinked = NULL;
/* In case there're threads waiting for new blinding value
* just notify them the value is ready
*/
if (blindingParamsList.waitCount > 0) {
PR_NotifyAllCondVar( blindingParamsList.cVar );
blindingParamsList.waitCount = 0;
}
PZ_Unlock(blindingParamsList.lock);
return SECSuccess;
}
/* Here, there are no usable blinding parameters available,
* and no free bp blocks, presumably because they're all
* actively having parameters generated for them.
* So, we need to wait here and not eat up CPU until some
* change happens.
*/
blindingParamsList.waitCount++;
PR_WaitCondVar( blindingParamsList.cVar, PR_INTERVAL_NO_TIMEOUT );
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
} while (1);
cleanup:
/* It is possible to reach this after the lock is already released. */
if (bpUnlinked) {
if (!holdingLock) {
PZ_Lock(blindingParamsList.lock);
holdingLock = PR_TRUE;
}
bp = bpUnlinked;
mp_clear( &bp->f );
mp_clear( &bp->g );
bp->counter = 0;
/* Must put the unlinked bp back on the free list */
bp->next = rsabp->free;
rsabp->free = bp;
}
if (holdingLock) {
PZ_Unlock(blindingParamsList.lock);
holdingLock = PR_FALSE;
}
if (err) {
MP_TO_SEC_ERROR(err);
}
return SECFailure;
}
static void translate_mpi_error(mp_err err)
{
MP_TO_SEC_ERROR(err);
}
/* Computes the ECDSA signature (a concatenation of two values r and s)
* on the digest using the given key and the random value kb (used in
* computing s).
*/
SECStatus
ECDSA_SignDigestWithSeed(ECPrivateKey *key, SECItem *signature,
const SECItem *digest, const unsigned char *kb, const int kblen)
{
SECStatus rv = SECFailure;
#ifndef NSS_DISABLE_ECC
mp_int x1;
mp_int d, k; /* private key, random integer */
mp_int r, s; /* tuple (r, s) is the signature */
mp_int n;
mp_err err = MP_OKAY;
ECParams *ecParams = NULL;
SECItem kGpoint = { siBuffer, NULL, 0};
int flen = 0; /* length in bytes of the field size */
unsigned olen; /* length in bytes of the base point order */
unsigned obits; /* length in bits of the base point order */
#if EC_DEBUG
char mpstr[256];
#endif
/* Initialize MPI integers. */
/* must happen before the first potential call to cleanup */
MP_DIGITS(&x1) = 0;
MP_DIGITS(&d) = 0;
MP_DIGITS(&k) = 0;
MP_DIGITS(&r) = 0;
MP_DIGITS(&s) = 0;
MP_DIGITS(&n) = 0;
/* Check args */
if (!key || !signature || !digest || !kb || (kblen < 0)) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
goto cleanup;
}
ecParams = &(key->ecParams);
flen = (ecParams->fieldID.size + 7) >> 3;
olen = ecParams->order.len;
if (signature->data == NULL) {
/* a call to get the signature length only */
goto finish;
}
if (signature->len < 2*olen) {
PORT_SetError(SEC_ERROR_OUTPUT_LEN);
goto cleanup;
}
CHECK_MPI_OK( mp_init(&x1) );
CHECK_MPI_OK( mp_init(&d) );
CHECK_MPI_OK( mp_init(&k) );
CHECK_MPI_OK( mp_init(&r) );
CHECK_MPI_OK( mp_init(&s) );
CHECK_MPI_OK( mp_init(&n) );
SECITEM_TO_MPINT( ecParams->order, &n );
SECITEM_TO_MPINT( key->privateValue, &d );
CHECK_MPI_OK( mp_read_unsigned_octets(&k, kb, kblen) );
/* Make sure k is in the interval [1, n-1] */
if ((mp_cmp_z(&k) <= 0) || (mp_cmp(&k, &n) >= 0)) {
#if EC_DEBUG
printf("k is outside [1, n-1]\n");
mp_tohex(&k, mpstr);
printf("k : %s \n", mpstr);
mp_tohex(&n, mpstr);
printf("n : %s \n", mpstr);
#endif
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
** We do not want timing information to leak the length of k,
** so we compute k*G using an equivalent scalar of fixed
** bit-length.
** Fix based on patch for ECDSA timing attack in the paper
** by Billy Bob Brumley and Nicola Tuveri at
** http://eprint.iacr.org/2011/232
**
** How do we convert k to a value of a fixed bit-length?
** k starts off as an integer satisfying 0 <= k < n. Hence,
** n <= k+n < 2n, which means k+n has either the same number
** of bits as n or one more bit than n. If k+n has the same
** number of bits as n, the second addition ensures that the
** final value has exactly one more bit than n. Thus, we
** always end up with a value that exactly one more bit than n.
*/
CHECK_MPI_OK( mp_add(&k, &n, &k) );
if (mpl_significant_bits(&k) <= mpl_significant_bits(&n)) {
CHECK_MPI_OK( mp_add(&k, &n, &k) );
}
/*
** ANSI X9.62, Section 5.3.2, Step 2
**
** Compute kG
*/
kGpoint.len = 2*flen + 1;
kGpoint.data = PORT_Alloc(2*flen + 1);
if ((kGpoint.data == NULL) ||
(ec_points_mul(ecParams, &k, NULL, NULL, &kGpoint)
!= SECSuccess))
goto cleanup;
/*
** ANSI X9.62, Section 5.3.3, Step 1
**
** Extract the x co-ordinate of kG into x1
*/
CHECK_MPI_OK( mp_read_unsigned_octets(&x1, kGpoint.data + 1,
(mp_size) flen) );
/*
** ANSI X9.62, Section 5.3.3, Step 2
**
** r = x1 mod n NOTE: n is the order of the curve
*/
CHECK_MPI_OK( mp_mod(&x1, &n, &r) );
/*
** ANSI X9.62, Section 5.3.3, Step 3
**
** verify r != 0
*/
if (mp_cmp_z(&r) == 0) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
** ANSI X9.62, Section 5.3.3, Step 4
**
** s = (k**-1 * (HASH(M) + d*r)) mod n
*/
SECITEM_TO_MPINT(*digest, &s); /* s = HASH(M) */
/* In the definition of EC signing, digests are truncated
* to the length of n in bits.
* (see SEC 1 "Elliptic Curve Digit Signature Algorithm" section 4.1.*/
CHECK_MPI_OK( (obits = mpl_significant_bits(&n)) );
if (digest->len*8 > obits) {
mpl_rsh(&s,&s,digest->len*8 - obits);
}
#if EC_DEBUG
mp_todecimal(&n, mpstr);
printf("n : %s (dec)\n", mpstr);
mp_todecimal(&d, mpstr);
printf("d : %s (dec)\n", mpstr);
mp_tohex(&x1, mpstr);
printf("x1: %s\n", mpstr);
mp_todecimal(&s, mpstr);
printf("digest: %s (decimal)\n", mpstr);
mp_todecimal(&r, mpstr);
printf("r : %s (dec)\n", mpstr);
mp_tohex(&r, mpstr);
printf("r : %s\n", mpstr);
#endif
CHECK_MPI_OK( mp_invmod(&k, &n, &k) ); /* k = k**-1 mod n */
CHECK_MPI_OK( mp_mulmod(&d, &r, &n, &d) ); /* d = d * r mod n */
CHECK_MPI_OK( mp_addmod(&s, &d, &n, &s) ); /* s = s + d mod n */
CHECK_MPI_OK( mp_mulmod(&s, &k, &n, &s) ); /* s = s * k mod n */
#if EC_DEBUG
mp_todecimal(&s, mpstr);
printf("s : %s (dec)\n", mpstr);
mp_tohex(&s, mpstr);
printf("s : %s\n", mpstr);
#endif
/*
** ANSI X9.62, Section 5.3.3, Step 5
**
** verify s != 0
*/
if (mp_cmp_z(&s) == 0) {
PORT_SetError(SEC_ERROR_NEED_RANDOM);
goto cleanup;
}
/*
**
** Signature is tuple (r, s)
*/
CHECK_MPI_OK( mp_to_fixlen_octets(&r, signature->data, olen) );
CHECK_MPI_OK( mp_to_fixlen_octets(&s, signature->data + olen, olen) );
finish:
signature->len = 2*olen;
rv = SECSuccess;
err = MP_OKAY;
cleanup:
mp_clear(&x1);
mp_clear(&d);
mp_clear(&k);
mp_clear(&r);
mp_clear(&s);
mp_clear(&n);
if (kGpoint.data) {
PORT_ZFree(kGpoint.data, 2*flen + 1);
}
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
#if EC_DEBUG
printf("ECDSA signing with seed %s\n",
(rv == SECSuccess) ? "succeeded" : "failed");
#endif
#else
PORT_SetError(SEC_ERROR_UNSUPPORTED_KEYALG);
#endif /* NSS_DISABLE_ECC */
return rv;
}
/* Validates an EC public key as described in Section 5.2.2 of
* X9.62. The ECDH primitive when used without the cofactor does
* not address small subgroup attacks, which may occur when the
* public key is not valid. These attacks can be prevented by
* validating the public key before using ECDH.
*/
SECStatus
EC_ValidatePublicKey(ECParams *ecParams, SECItem *publicValue)
{
#ifndef NSS_DISABLE_ECC
mp_int Px, Py;
ECGroup *group = NULL;
SECStatus rv = SECFailure;
mp_err err = MP_OKAY;
int len;
if (!ecParams || !publicValue) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
/* NOTE: We only support uncompressed points for now */
len = (ecParams->fieldID.size + 7) >> 3;
if (publicValue->data[0] != EC_POINT_FORM_UNCOMPRESSED) {
PORT_SetError(SEC_ERROR_UNSUPPORTED_EC_POINT_FORM);
return SECFailure;
} else if (publicValue->len != (2 * len + 1)) {
PORT_SetError(SEC_ERROR_BAD_KEY);
return SECFailure;
}
MP_DIGITS(&Px) = 0;
MP_DIGITS(&Py) = 0;
CHECK_MPI_OK( mp_init(&Px) );
CHECK_MPI_OK( mp_init(&Py) );
/* Initialize Px and Py */
CHECK_MPI_OK( mp_read_unsigned_octets(&Px, publicValue->data + 1, (mp_size) len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&Py, publicValue->data + 1 + len, (mp_size) len) );
/* construct from named params */
group = ECGroup_fromName(ecParams->name);
if (group == NULL) {
/*
* ECGroup_fromName fails if ecParams->name is not a valid
* ECCurveName value, or if we run out of memory, or perhaps
* for other reasons. Unfortunately if ecParams->name is a
* valid ECCurveName value, we don't know what the right error
* code should be because ECGroup_fromName doesn't return an
* error code to the caller. Set err to MP_UNDEF because
* that's what ECGroup_fromName uses internally.
*/
if ((ecParams->name <= ECCurve_noName) ||
(ecParams->name >= ECCurve_pastLastCurve)) {
err = MP_BADARG;
} else {
err = MP_UNDEF;
}
goto cleanup;
}
/* validate public point */
if ((err = ECPoint_validate(group, &Px, &Py)) < MP_YES) {
if (err == MP_NO) {
PORT_SetError(SEC_ERROR_BAD_KEY);
rv = SECFailure;
err = MP_OKAY; /* don't change the error code */
}
goto cleanup;
}
rv = SECSuccess;
cleanup:
ECGroup_free(group);
mp_clear(&Px);
mp_clear(&Py);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
#else
PORT_SetError(SEC_ERROR_UNSUPPORTED_KEYALG);
return SECFailure;
#endif /* NSS_DISABLE_ECC */
}
SECStatus
DH_GenParam(int primeLen, DHParams **params)
{
PLArenaPool *arena;
DHParams *dhparams;
unsigned char *pb = NULL;
unsigned char *ab = NULL;
unsigned long counter = 0;
mp_int p, q, a, h, psub1, test;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
if (!params || primeLen < 0) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
arena = PORT_NewArena(NSS_FREEBL_DEFAULT_CHUNKSIZE);
if (!arena) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
return SECFailure;
}
dhparams = (DHParams *)PORT_ArenaZAlloc(arena, sizeof(DHParams));
if (!dhparams) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
PORT_FreeArena(arena, PR_TRUE);
return SECFailure;
}
dhparams->arena = arena;
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&a) = 0;
MP_DIGITS(&h) = 0;
MP_DIGITS(&psub1) = 0;
MP_DIGITS(&test) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&a) );
CHECK_MPI_OK( mp_init(&h) );
CHECK_MPI_OK( mp_init(&psub1) );
CHECK_MPI_OK( mp_init(&test) );
/* generate prime with MPI, uses Miller-Rabin to generate strong prime. */
pb = PORT_Alloc(primeLen);
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(pb, primeLen) );
pb[0] |= 0x80; /* set high-order bit */
pb[primeLen-1] |= 0x01; /* set low-order bit */
CHECK_MPI_OK( mp_read_unsigned_octets(&p, pb, primeLen) );
CHECK_MPI_OK( mpp_make_prime(&p, primeLen * 8, PR_TRUE, &counter) );
/* construct Sophie-Germain prime q = (p-1)/2. */
CHECK_MPI_OK( mp_sub_d(&p, 1, &psub1) );
CHECK_MPI_OK( mp_div_2(&psub1, &q) );
/* construct a generator from the prime. */
ab = PORT_Alloc(primeLen);
/* generate a candidate number a in p's field */
CHECK_SEC_OK( RNG_GenerateGlobalRandomBytes(ab, primeLen) );
CHECK_MPI_OK( mp_read_unsigned_octets(&a, ab, primeLen) );
/* force a < p (note that quot(a/p) <= 1) */
if ( mp_cmp(&a, &p) > 0 )
CHECK_MPI_OK( mp_sub(&a, &p, &a) );
do {
/* check that a is in the range [2..p-1] */
if ( mp_cmp_d(&a, 2) < 0 || mp_cmp(&a, &psub1) >= 0) {
/* a is outside of the allowed range. Set a=3 and keep going. */
mp_set(&a, 3);
}
/* if a**q mod p != 1 then a is a generator */
CHECK_MPI_OK( mp_exptmod(&a, &q, &p, &test) );
if ( mp_cmp_d(&test, 1) != 0 )
break;
/* increment the candidate and try again. */
CHECK_MPI_OK( mp_add_d(&a, 1, &a) );
} while (PR_TRUE);
MPINT_TO_SECITEM(&p, &dhparams->prime, arena);
MPINT_TO_SECITEM(&a, &dhparams->base, arena);
*params = dhparams;
cleanup:
mp_clear(&p);
mp_clear(&q);
mp_clear(&a);
mp_clear(&h);
mp_clear(&psub1);
mp_clear(&test);
if (pb) PORT_ZFree(pb, primeLen);
if (ab) PORT_ZFree(ab, primeLen);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv)
PORT_FreeArena(arena, PR_TRUE);
return rv;
}
SECStatus
RSA_PrivateKeyCheck(const RSAPrivateKey *key)
{
mp_int p, q, n, psub1, qsub1, e, d, d_p, d_q, qInv, res;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&n) = 0;
MP_DIGITS(&psub1)= 0;
MP_DIGITS(&qsub1)= 0;
MP_DIGITS(&e) = 0;
MP_DIGITS(&d) = 0;
MP_DIGITS(&d_p) = 0;
MP_DIGITS(&d_q) = 0;
MP_DIGITS(&qInv) = 0;
MP_DIGITS(&res) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&psub1));
CHECK_MPI_OK( mp_init(&qsub1));
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&d) );
CHECK_MPI_OK( mp_init(&d_p) );
CHECK_MPI_OK( mp_init(&d_q) );
CHECK_MPI_OK( mp_init(&qInv) );
CHECK_MPI_OK( mp_init(&res) );
if (!key->modulus.data || !key->prime1.data || !key->prime2.data ||
!key->publicExponent.data || !key->privateExponent.data ||
!key->exponent1.data || !key->exponent2.data ||
!key->coefficient.data) {
/*call RSA_PopulatePrivateKey first, if the application wishes to
* recover these parameters */
err = MP_BADARG;
goto cleanup;
}
SECITEM_TO_MPINT(key->modulus, &n);
SECITEM_TO_MPINT(key->prime1, &p);
SECITEM_TO_MPINT(key->prime2, &q);
SECITEM_TO_MPINT(key->publicExponent, &e);
SECITEM_TO_MPINT(key->privateExponent, &d);
SECITEM_TO_MPINT(key->exponent1, &d_p);
SECITEM_TO_MPINT(key->exponent2, &d_q);
SECITEM_TO_MPINT(key->coefficient, &qInv);
/* p > q */
if (mp_cmp(&p, &q) <= 0) {
rv = SECFailure;
goto cleanup;
}
#define VERIFY_MPI_EQUAL(m1, m2) \
if (mp_cmp(m1, m2) != 0) { \
rv = SECFailure; \
goto cleanup; \
}
#define VERIFY_MPI_EQUAL_1(m) \
if (mp_cmp_d(m, 1) != 0) { \
rv = SECFailure; \
goto cleanup; \
}
/*
* The following errors cannot be recovered from.
*/
/* n == p * q */
CHECK_MPI_OK( mp_mul(&p, &q, &res) );
VERIFY_MPI_EQUAL(&res, &n);
/* gcd(e, p-1) == 1 */
CHECK_MPI_OK( mp_sub_d(&p, 1, &psub1) );
CHECK_MPI_OK( mp_gcd(&e, &psub1, &res) );
VERIFY_MPI_EQUAL_1(&res);
/* gcd(e, q-1) == 1 */
CHECK_MPI_OK( mp_sub_d(&q, 1, &qsub1) );
CHECK_MPI_OK( mp_gcd(&e, &qsub1, &res) );
VERIFY_MPI_EQUAL_1(&res);
/* d*e == 1 mod p-1 */
CHECK_MPI_OK( mp_mulmod(&d, &e, &psub1, &res) );
VERIFY_MPI_EQUAL_1(&res);
/* d*e == 1 mod q-1 */
CHECK_MPI_OK( mp_mulmod(&d, &e, &qsub1, &res) );
VERIFY_MPI_EQUAL_1(&res);
/*
* The following errors can be recovered from. However, the purpose of this
* function is to check consistency, so they are not.
*/
/* d_p == d mod p-1 */
CHECK_MPI_OK( mp_mod(&d, &psub1, &res) );
VERIFY_MPI_EQUAL(&res, &d_p);
/* d_q == d mod q-1 */
CHECK_MPI_OK( mp_mod(&d, &qsub1, &res) );
VERIFY_MPI_EQUAL(&res, &d_q);
/* q * q**-1 == 1 mod p */
CHECK_MPI_OK( mp_mulmod(&q, &qInv, &p, &res) );
VERIFY_MPI_EQUAL_1(&res);
cleanup:
mp_clear(&n);
mp_clear(&p);
mp_clear(&q);
mp_clear(&psub1);
mp_clear(&qsub1);
mp_clear(&e);
mp_clear(&d);
mp_clear(&d_p);
mp_clear(&d_q);
mp_clear(&qInv);
mp_clear(&res);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/*
** Perform a raw private-key operation
** Length of input and output buffers are equal to key's modulus len.
*/
static SECStatus
rsa_PrivateKeyOp(RSAPrivateKey *key,
unsigned char *output,
const unsigned char *input,
PRBool check)
{
unsigned int modLen;
unsigned int offset;
SECStatus rv = SECSuccess;
mp_err err;
mp_int n, c, m;
mp_int f, g;
if (!key || !output || !input) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
/* check input out of range (needs to be in range [0..n-1]) */
modLen = rsa_modulusLen(&key->modulus);
offset = (key->modulus.data[0] == 0) ? 1 : 0; /* may be leading 0 */
if (memcmp(input, key->modulus.data + offset, modLen) >= 0) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
MP_DIGITS(&n) = 0;
MP_DIGITS(&c) = 0;
MP_DIGITS(&m) = 0;
MP_DIGITS(&f) = 0;
MP_DIGITS(&g) = 0;
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&c) );
CHECK_MPI_OK( mp_init(&m) );
CHECK_MPI_OK( mp_init(&f) );
CHECK_MPI_OK( mp_init(&g) );
SECITEM_TO_MPINT(key->modulus, &n);
OCTETS_TO_MPINT(input, &c, modLen);
/* If blinding, compute pre-image of ciphertext by multiplying by
** blinding factor
*/
if (nssRSAUseBlinding) {
CHECK_SEC_OK( get_blinding_params(key, &n, modLen, &f, &g) );
/* c' = c*f mod n */
CHECK_MPI_OK( mp_mulmod(&c, &f, &n, &c) );
}
/* Do the private key operation m = c**d mod n */
if ( key->prime1.len == 0 ||
key->prime2.len == 0 ||
key->exponent1.len == 0 ||
key->exponent2.len == 0 ||
key->coefficient.len == 0) {
CHECK_SEC_OK( rsa_PrivateKeyOpNoCRT(key, &m, &c, &n, modLen) );
} else if (check) {
CHECK_SEC_OK( rsa_PrivateKeyOpCRTCheckedPubKey(key, &m, &c) );
} else {
CHECK_SEC_OK( rsa_PrivateKeyOpCRTNoCheck(key, &m, &c) );
}
/* If blinding, compute post-image of plaintext by multiplying by
** blinding factor
*/
if (nssRSAUseBlinding) {
/* m = m'*g mod n */
CHECK_MPI_OK( mp_mulmod(&m, &g, &n, &m) );
}
err = mp_to_fixlen_octets(&m, output, modLen);
if (err >= 0) err = MP_OKAY;
cleanup:
mp_clear(&n);
mp_clear(&c);
mp_clear(&m);
mp_clear(&f);
mp_clear(&g);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/*
* Computes scalar point multiplication pointQ = k1 * G + k2 * pointP for
* the curve whose parameters are encoded in params with base point G.
*/
SECStatus
ec_points_mul(const ECParams *params, const mp_int *k1, const mp_int *k2,
const SECItem *pointP, SECItem *pointQ)
{
mp_int Px, Py, Qx, Qy;
mp_int Gx, Gy, order, irreducible, a, b;
#if 0 /* currently don't support non-named curves */
unsigned int irr_arr[5];
#endif
ECGroup *group = NULL;
SECStatus rv = SECFailure;
mp_err err = MP_OKAY;
int len;
#if EC_DEBUG
int i;
char mpstr[256];
printf("ec_points_mul: params [len=%d]:", params->DEREncoding.len);
for (i = 0; i < params->DEREncoding.len; i++)
printf("%02x:", params->DEREncoding.data[i]);
printf("\n");
if (k1 != NULL) {
mp_tohex(k1, mpstr);
printf("ec_points_mul: scalar k1: %s\n", mpstr);
mp_todecimal(k1, mpstr);
printf("ec_points_mul: scalar k1: %s (dec)\n", mpstr);
}
if (k2 != NULL) {
mp_tohex(k2, mpstr);
printf("ec_points_mul: scalar k2: %s\n", mpstr);
mp_todecimal(k2, mpstr);
printf("ec_points_mul: scalar k2: %s (dec)\n", mpstr);
}
if (pointP != NULL) {
printf("ec_points_mul: pointP [len=%d]:", pointP->len);
for (i = 0; i < pointP->len; i++)
printf("%02x:", pointP->data[i]);
printf("\n");
}
#endif
/* NOTE: We only support uncompressed points for now */
len = (params->fieldID.size + 7) >> 3;
if (pointP != NULL) {
if ((pointP->data[0] != EC_POINT_FORM_UNCOMPRESSED) ||
(pointP->len != (2 * len + 1))) {
PORT_SetError(SEC_ERROR_UNSUPPORTED_EC_POINT_FORM);
return SECFailure;
};
}
MP_DIGITS(&Px) = 0;
MP_DIGITS(&Py) = 0;
MP_DIGITS(&Qx) = 0;
MP_DIGITS(&Qy) = 0;
MP_DIGITS(&Gx) = 0;
MP_DIGITS(&Gy) = 0;
MP_DIGITS(&order) = 0;
MP_DIGITS(&irreducible) = 0;
MP_DIGITS(&a) = 0;
MP_DIGITS(&b) = 0;
CHECK_MPI_OK( mp_init(&Px) );
CHECK_MPI_OK( mp_init(&Py) );
CHECK_MPI_OK( mp_init(&Qx) );
CHECK_MPI_OK( mp_init(&Qy) );
CHECK_MPI_OK( mp_init(&Gx) );
CHECK_MPI_OK( mp_init(&Gy) );
CHECK_MPI_OK( mp_init(&order) );
CHECK_MPI_OK( mp_init(&irreducible) );
CHECK_MPI_OK( mp_init(&a) );
CHECK_MPI_OK( mp_init(&b) );
if ((k2 != NULL) && (pointP != NULL)) {
/* Initialize Px and Py */
CHECK_MPI_OK( mp_read_unsigned_octets(&Px, pointP->data + 1, (mp_size) len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&Py, pointP->data + 1 + len, (mp_size) len) );
}
/* construct from named params, if possible */
if (params->name != ECCurve_noName) {
group = ECGroup_fromName(params->name);
}
#if 0 /* currently don't support non-named curves */
if (group == NULL) {
/* Set up mp_ints containing the curve coefficients */
CHECK_MPI_OK( mp_read_unsigned_octets(&Gx, params->base.data + 1,
(mp_size) len) );
CHECK_MPI_OK( mp_read_unsigned_octets(&Gy, params->base.data + 1 + len,
(mp_size) len) );
SECITEM_TO_MPINT( params->order, &order );
SECITEM_TO_MPINT( params->curve.a, &a );
SECITEM_TO_MPINT( params->curve.b, &b );
if (params->fieldID.type == ec_field_GFp) {
SECITEM_TO_MPINT( params->fieldID.u.prime, &irreducible );
group = ECGroup_consGFp(&irreducible, &a, &b, &Gx, &Gy, &order, params->cofactor);
} else {
SECITEM_TO_MPINT( params->fieldID.u.poly, &irreducible );
irr_arr[0] = params->fieldID.size;
irr_arr[1] = params->fieldID.k1;
irr_arr[2] = params->fieldID.k2;
irr_arr[3] = params->fieldID.k3;
irr_arr[4] = 0;
group = ECGroup_consGF2m(&irreducible, irr_arr, &a, &b, &Gx, &Gy, &order, params->cofactor);
}
}
#endif
if (group == NULL)
goto cleanup;
if ((k2 != NULL) && (pointP != NULL)) {
CHECK_MPI_OK( ECPoints_mul(group, k1, k2, &Px, &Py, &Qx, &Qy) );
} else {
CHECK_MPI_OK( ECPoints_mul(group, k1, NULL, NULL, NULL, &Qx, &Qy) );
}
/* Construct the SECItem representation of point Q */
pointQ->data[0] = EC_POINT_FORM_UNCOMPRESSED;
CHECK_MPI_OK( mp_to_fixlen_octets(&Qx, pointQ->data + 1,
(mp_size) len) );
CHECK_MPI_OK( mp_to_fixlen_octets(&Qy, pointQ->data + 1 + len,
(mp_size) len) );
rv = SECSuccess;
#if EC_DEBUG
printf("ec_points_mul: pointQ [len=%d]:", pointQ->len);
for (i = 0; i < pointQ->len; i++)
printf("%02x:", pointQ->data[i]);
printf("\n");
#endif
cleanup:
ECGroup_free(group);
mp_clear(&Px);
mp_clear(&Py);
mp_clear(&Qx);
mp_clear(&Qy);
mp_clear(&Gx);
mp_clear(&Gy);
mp_clear(&order);
mp_clear(&irreducible);
mp_clear(&a);
mp_clear(&b);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}
/*
** Generate and return a new RSA public and private key.
** Both keys are encoded in a single RSAPrivateKey structure.
** "cx" is the random number generator context
** "keySizeInBits" is the size of the key to be generated, in bits.
** 512, 1024, etc.
** "publicExponent" when not NULL is a pointer to some data that
** represents the public exponent to use. The data is a byte
** encoded integer, in "big endian" order.
*/
RSAPrivateKey *
RSA_NewKey(int keySizeInBits, SECItem *publicExponent)
{
unsigned int primeLen;
mp_int p, q, e, d;
int kiter;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
int prerr = 0;
RSAPrivateKey *key = NULL;
PLArenaPool *arena = NULL;
/* Require key size to be a multiple of 16 bits. */
if (!publicExponent || keySizeInBits % 16 != 0 ||
BAD_RSA_KEY_SIZE(keySizeInBits/8, publicExponent->len)) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return NULL;
}
/* 1. Allocate arena & key */
arena = PORT_NewArena(NSS_FREEBL_DEFAULT_CHUNKSIZE);
if (!arena) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
return NULL;
}
key = PORT_ArenaZNew(arena, RSAPrivateKey);
if (!key) {
PORT_SetError(SEC_ERROR_NO_MEMORY);
PORT_FreeArena(arena, PR_TRUE);
return NULL;
}
key->arena = arena;
/* length of primes p and q (in bytes) */
primeLen = keySizeInBits / (2 * PR_BITS_PER_BYTE);
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&e) = 0;
MP_DIGITS(&d) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&d) );
/* 2. Set the version number (PKCS1 v1.5 says it should be zero) */
SECITEM_AllocItem(arena, &key->version, 1);
key->version.data[0] = 0;
/* 3. Set the public exponent */
SECITEM_TO_MPINT(*publicExponent, &e);
kiter = 0;
do {
prerr = 0;
PORT_SetError(0);
CHECK_SEC_OK( generate_prime(&p, primeLen) );
CHECK_SEC_OK( generate_prime(&q, primeLen) );
/* Assure q < p */
if (mp_cmp(&p, &q) < 0)
mp_exch(&p, &q);
/* Attempt to use these primes to generate a key */
rv = rsa_build_from_primes(&p, &q,
&e, PR_FALSE, /* needPublicExponent=false */
&d, PR_TRUE, /* needPrivateExponent=true */
key, keySizeInBits);
if (rv == SECSuccess)
break; /* generated two good primes */
prerr = PORT_GetError();
kiter++;
/* loop until have primes */
} while (prerr == SEC_ERROR_NEED_RANDOM && kiter < MAX_KEY_GEN_ATTEMPTS);
if (prerr)
goto cleanup;
cleanup:
mp_clear(&p);
mp_clear(&q);
mp_clear(&e);
mp_clear(&d);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv && arena) {
PORT_FreeArena(arena, PR_TRUE);
key = NULL;
}
return key;
}
/*
** Performs an ECDH key derivation by computing the scalar point
** multiplication of privateValue and publicValue (with or without the
** cofactor) and returns the x-coordinate of the resulting elliptic
** curve point in derived secret. If successful, derivedSecret->data
** is set to the address of the newly allocated buffer containing the
** derived secret, and derivedSecret->len is the size of the secret
** produced. It is the caller's responsibility to free the allocated
** buffer containing the derived secret.
*/
SECStatus
ECDH_Derive(SECItem *publicValue,
ECParams *ecParams,
SECItem *privateValue,
PRBool withCofactor,
SECItem *derivedSecret)
{
SECStatus rv = SECFailure;
#ifndef NSS_DISABLE_ECC
unsigned int len = 0;
SECItem pointQ = {siBuffer, NULL, 0};
mp_int k; /* to hold the private value */
mp_int cofactor;
mp_err err = MP_OKAY;
#if EC_DEBUG
int i;
#endif
if (!publicValue || !ecParams || !privateValue ||
!derivedSecret) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
MP_DIGITS(&k) = 0;
memset(derivedSecret, 0, sizeof *derivedSecret);
len = (ecParams->fieldID.size + 7) >> 3;
pointQ.len = 2*len + 1;
if ((pointQ.data = PORT_Alloc(2*len + 1)) == NULL) goto cleanup;
CHECK_MPI_OK( mp_init(&k) );
CHECK_MPI_OK( mp_read_unsigned_octets(&k, privateValue->data,
(mp_size) privateValue->len) );
if (withCofactor && (ecParams->cofactor != 1)) {
/* multiply k with the cofactor */
MP_DIGITS(&cofactor) = 0;
CHECK_MPI_OK( mp_init(&cofactor) );
mp_set(&cofactor, ecParams->cofactor);
CHECK_MPI_OK( mp_mul(&k, &cofactor, &k) );
}
/* Multiply our private key and peer's public point */
if (ec_points_mul(ecParams, NULL, &k, publicValue, &pointQ) != SECSuccess)
goto cleanup;
if (ec_point_at_infinity(&pointQ)) {
PORT_SetError(SEC_ERROR_BAD_KEY); /* XXX better error code? */
goto cleanup;
}
/* Allocate memory for the derived secret and copy
* the x co-ordinate of pointQ into it.
*/
SECITEM_AllocItem(NULL, derivedSecret, len);
memcpy(derivedSecret->data, pointQ.data + 1, len);
rv = SECSuccess;
#if EC_DEBUG
printf("derived_secret:\n");
for (i = 0; i < derivedSecret->len; i++)
printf("%02x:", derivedSecret->data[i]);
printf("\n");
#endif
cleanup:
mp_clear(&k);
if (err) {
MP_TO_SEC_ERROR(err);
}
if (pointQ.data) {
PORT_ZFree(pointQ.data, 2*len + 1);
}
#else
PORT_SetError(SEC_ERROR_UNSUPPORTED_KEYALG);
#endif /* NSS_DISABLE_ECC */
return rv;
}
/*
* take a private key with only a few elements and fill out the missing pieces.
*
* All the entries will be overwritten with data allocated out of the arena
* If no arena is supplied, one will be created.
*
* The following fields must be supplied in order for this function
* to succeed:
* one of either publicExponent or privateExponent
* two more of the following 5 parameters.
* modulus (n)
* prime1 (p)
* prime2 (q)
* publicExponent (e)
* privateExponent (d)
*
* NOTE: if only the publicExponent, privateExponent, and one prime is given,
* then there may be more than one RSA key that matches that combination.
*
* All parameters will be replaced in the key structure with new parameters
* Allocated out of the arena. There is no attempt to free the old structures.
* Prime1 will always be greater than prime2 (even if the caller supplies the
* smaller prime as prime1 or the larger prime as prime2). The parameters are
* not overwritten on failure.
*
* How it works:
* We can generate all the parameters from:
* one of the exponents, plus the two primes. (rsa_build_key_from_primes) *
* If we are given one of the exponents and both primes, we are done.
* If we are given one of the exponents, the modulus and one prime, we
* caclulate the second prime by dividing the modulus by the given
* prime, giving us and exponent and 2 primes.
* If we are given 2 exponents and either the modulus or one of the primes
* we calculate k*phi = d*e-1, where k is an integer less than d which
* divides d*e-1. We find factor k so we can isolate phi.
* phi = (p-1)(q-1)
* If one of the primes are given, we can use phi to find the other prime
* as follows: q = (phi/(p-1)) + 1. We now have 2 primes and an
* exponent. (NOTE: if more then one prime meets this condition, the
* operation will fail. See comments elsewhere in this file about this).
* If the modulus is given, then we can calculate the sum of the primes
* as follows: s := (p+q), phi = (p-1)(q-1) = pq -p - q +1, pq = n ->
* phi = n - s + 1, s = n - phi +1. Now that we have s = p+q and n=pq,
* we can solve our 2 equations and 2 unknowns as follows: q=s-p ->
* n=p*(s-p)= sp -p^2 -> p^2-sp+n = 0. Using the quadratic to solve for
* p, p=1/2*(s+ sqrt(s*s-4*n)) [q=1/2*(s-sqrt(s*s-4*n)]. We again have
* 2 primes and an exponent.
*
*/
SECStatus
RSA_PopulatePrivateKey(RSAPrivateKey *key)
{
PLArenaPool *arena = NULL;
PRBool needPublicExponent = PR_TRUE;
PRBool needPrivateExponent = PR_TRUE;
PRBool hasModulus = PR_FALSE;
unsigned int keySizeInBits = 0;
int prime_count = 0;
/* standard RSA nominclature */
mp_int p, q, e, d, n;
/* remainder */
mp_int r;
mp_err err = 0;
SECStatus rv = SECFailure;
MP_DIGITS(&p) = 0;
MP_DIGITS(&q) = 0;
MP_DIGITS(&e) = 0;
MP_DIGITS(&d) = 0;
MP_DIGITS(&n) = 0;
MP_DIGITS(&r) = 0;
CHECK_MPI_OK( mp_init(&p) );
CHECK_MPI_OK( mp_init(&q) );
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&d) );
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&r) );
/* if the key didn't already have an arena, create one. */
if (key->arena == NULL) {
arena = PORT_NewArena(NSS_FREEBL_DEFAULT_CHUNKSIZE);
if (!arena) {
goto cleanup;
}
key->arena = arena;
}
/* load up the known exponents */
if (key->publicExponent.data) {
SECITEM_TO_MPINT(key->publicExponent, &e);
needPublicExponent = PR_FALSE;
}
if (key->privateExponent.data) {
SECITEM_TO_MPINT(key->privateExponent, &d);
needPrivateExponent = PR_FALSE;
}
if (needPrivateExponent && needPublicExponent) {
/* Not enough information, we need at least one exponent */
err = MP_BADARG;
goto cleanup;
}
/* load up the known primes. If only one prime is given, it will be
* assigned 'p'. Once we have both primes, well make sure p is the larger.
* The value prime_count tells us howe many we have acquired.
*/
if (key->prime1.data) {
int primeLen = key->prime1.len;
if (key->prime1.data[0] == 0) {
primeLen--;
}
keySizeInBits = primeLen * 2 * PR_BITS_PER_BYTE;
SECITEM_TO_MPINT(key->prime1, &p);
prime_count++;
}
if (key->prime2.data) {
int primeLen = key->prime2.len;
if (key->prime2.data[0] == 0) {
primeLen--;
}
keySizeInBits = primeLen * 2 * PR_BITS_PER_BYTE;
SECITEM_TO_MPINT(key->prime2, prime_count ? &q : &p);
prime_count++;
}
/* load up the modulus */
if (key->modulus.data) {
int modLen = key->modulus.len;
if (key->modulus.data[0] == 0) {
modLen--;
}
keySizeInBits = modLen * PR_BITS_PER_BYTE;
SECITEM_TO_MPINT(key->modulus, &n);
hasModulus = PR_TRUE;
}
/* if we have the modulus and one prime, calculate the second. */
if ((prime_count == 1) && (hasModulus)) {
mp_div(&n,&p,&q,&r);
if (mp_cmp_z(&r) != 0) {
/* p is not a factor or n, fail */
err = MP_BADARG;
goto cleanup;
}
prime_count++;
}
/* If we didn't have enough primes try to calculate the primes from
* the exponents */
if (prime_count < 2) {
/* if we don't have at least 2 primes at this point, then we need both
* exponents and one prime or a modulus*/
if (!needPublicExponent && !needPrivateExponent &&
((prime_count > 0) || hasModulus)) {
CHECK_MPI_OK(rsa_get_primes_from_exponents(&e,&d,&p,&q,
&n,hasModulus,keySizeInBits));
} else {
/* not enough given parameters to get both primes */
err = MP_BADARG;
goto cleanup;
}
}
/* force p to the the larger prime */
if (mp_cmp(&p, &q) < 0)
mp_exch(&p, &q);
/* we now have our 2 primes and at least one exponent, we can fill
* in the key */
rv = rsa_build_from_primes(&p, &q,
&e, needPublicExponent,
&d, needPrivateExponent,
key, keySizeInBits);
cleanup:
mp_clear(&p);
mp_clear(&q);
mp_clear(&e);
mp_clear(&d);
mp_clear(&n);
mp_clear(&r);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
if (rv && arena) {
PORT_FreeArena(arena, PR_TRUE);
key->arena = NULL;
}
return rv;
}
/*
** Checks the signature on the given digest using the key provided.
*/
SECStatus
ECDSA_VerifyDigest(ECPublicKey *key, const SECItem *signature,
const SECItem *digest)
{
SECStatus rv = SECFailure;
#ifndef NSS_DISABLE_ECC
mp_int r_, s_; /* tuple (r', s') is received signature) */
mp_int c, u1, u2, v; /* intermediate values used in verification */
mp_int x1;
mp_int n;
mp_err err = MP_OKAY;
ECParams *ecParams = NULL;
SECItem pointC = { siBuffer, NULL, 0 };
int slen; /* length in bytes of a half signature (r or s) */
int flen; /* length in bytes of the field size */
unsigned olen; /* length in bytes of the base point order */
unsigned obits; /* length in bits of the base point order */
#if EC_DEBUG
char mpstr[256];
printf("ECDSA verification called\n");
#endif
/* Initialize MPI integers. */
/* must happen before the first potential call to cleanup */
MP_DIGITS(&r_) = 0;
MP_DIGITS(&s_) = 0;
MP_DIGITS(&c) = 0;
MP_DIGITS(&u1) = 0;
MP_DIGITS(&u2) = 0;
MP_DIGITS(&x1) = 0;
MP_DIGITS(&v) = 0;
MP_DIGITS(&n) = 0;
/* Check args */
if (!key || !signature || !digest) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
goto cleanup;
}
ecParams = &(key->ecParams);
flen = (ecParams->fieldID.size + 7) >> 3;
olen = ecParams->order.len;
if (signature->len == 0 || signature->len%2 != 0 ||
signature->len > 2*olen) {
PORT_SetError(SEC_ERROR_INPUT_LEN);
goto cleanup;
}
slen = signature->len/2;
SECITEM_AllocItem(NULL, &pointC, 2*flen + 1);
if (pointC.data == NULL)
goto cleanup;
CHECK_MPI_OK( mp_init(&r_) );
CHECK_MPI_OK( mp_init(&s_) );
CHECK_MPI_OK( mp_init(&c) );
CHECK_MPI_OK( mp_init(&u1) );
CHECK_MPI_OK( mp_init(&u2) );
CHECK_MPI_OK( mp_init(&x1) );
CHECK_MPI_OK( mp_init(&v) );
CHECK_MPI_OK( mp_init(&n) );
/*
** Convert received signature (r', s') into MPI integers.
*/
CHECK_MPI_OK( mp_read_unsigned_octets(&r_, signature->data, slen) );
CHECK_MPI_OK( mp_read_unsigned_octets(&s_, signature->data + slen, slen) );
/*
** ANSI X9.62, Section 5.4.2, Steps 1 and 2
**
** Verify that 0 < r' < n and 0 < s' < n
*/
SECITEM_TO_MPINT(ecParams->order, &n);
if (mp_cmp_z(&r_) <= 0 || mp_cmp_z(&s_) <= 0 ||
mp_cmp(&r_, &n) >= 0 || mp_cmp(&s_, &n) >= 0) {
PORT_SetError(SEC_ERROR_BAD_SIGNATURE);
goto cleanup; /* will return rv == SECFailure */
}
/*
** ANSI X9.62, Section 5.4.2, Step 3
**
** c = (s')**-1 mod n
*/
CHECK_MPI_OK( mp_invmod(&s_, &n, &c) ); /* c = (s')**-1 mod n */
/*
** ANSI X9.62, Section 5.4.2, Step 4
**
** u1 = ((HASH(M')) * c) mod n
*/
SECITEM_TO_MPINT(*digest, &u1); /* u1 = HASH(M) */
/* In the definition of EC signing, digests are truncated
* to the length of n in bits.
* (see SEC 1 "Elliptic Curve Digit Signature Algorithm" section 4.1.*/
CHECK_MPI_OK( (obits = mpl_significant_bits(&n)) );
if (digest->len*8 > obits) { /* u1 = HASH(M') */
mpl_rsh(&u1,&u1,digest->len*8 - obits);
}
#if EC_DEBUG
mp_todecimal(&r_, mpstr);
printf("r_: %s (dec)\n", mpstr);
mp_todecimal(&s_, mpstr);
printf("s_: %s (dec)\n", mpstr);
mp_todecimal(&c, mpstr);
printf("c : %s (dec)\n", mpstr);
mp_todecimal(&u1, mpstr);
printf("digest: %s (dec)\n", mpstr);
#endif
CHECK_MPI_OK( mp_mulmod(&u1, &c, &n, &u1) ); /* u1 = u1 * c mod n */
/*
** ANSI X9.62, Section 5.4.2, Step 4
**
** u2 = ((r') * c) mod n
*/
CHECK_MPI_OK( mp_mulmod(&r_, &c, &n, &u2) );
/*
** ANSI X9.62, Section 5.4.3, Step 1
**
** Compute u1*G + u2*Q
** Here, A = u1.G B = u2.Q and C = A + B
** If the result, C, is the point at infinity, reject the signature
*/
if (ec_points_mul(ecParams, &u1, &u2, &key->publicValue, &pointC)
!= SECSuccess) {
rv = SECFailure;
goto cleanup;
}
if (ec_point_at_infinity(&pointC)) {
PORT_SetError(SEC_ERROR_BAD_SIGNATURE);
rv = SECFailure;
goto cleanup;
}
CHECK_MPI_OK( mp_read_unsigned_octets(&x1, pointC.data + 1, flen) );
/*
** ANSI X9.62, Section 5.4.4, Step 2
**
** v = x1 mod n
*/
CHECK_MPI_OK( mp_mod(&x1, &n, &v) );
#if EC_DEBUG
mp_todecimal(&r_, mpstr);
printf("r_: %s (dec)\n", mpstr);
mp_todecimal(&v, mpstr);
printf("v : %s (dec)\n", mpstr);
#endif
/*
** ANSI X9.62, Section 5.4.4, Step 3
**
** Verification: v == r'
*/
if (mp_cmp(&v, &r_)) {
PORT_SetError(SEC_ERROR_BAD_SIGNATURE);
rv = SECFailure; /* Signature failed to verify. */
} else {
rv = SECSuccess; /* Signature verified. */
}
#if EC_DEBUG
mp_todecimal(&u1, mpstr);
printf("u1: %s (dec)\n", mpstr);
mp_todecimal(&u2, mpstr);
printf("u2: %s (dec)\n", mpstr);
mp_tohex(&x1, mpstr);
printf("x1: %s\n", mpstr);
mp_todecimal(&v, mpstr);
printf("v : %s (dec)\n", mpstr);
#endif
cleanup:
mp_clear(&r_);
mp_clear(&s_);
mp_clear(&c);
mp_clear(&u1);
mp_clear(&u2);
mp_clear(&x1);
mp_clear(&v);
mp_clear(&n);
if (pointC.data) SECITEM_FreeItem(&pointC, PR_FALSE);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
#if EC_DEBUG
printf("ECDSA verification %s\n",
(rv == SECSuccess) ? "succeeded" : "failed");
#endif
#else
PORT_SetError(SEC_ERROR_UNSUPPORTED_KEYALG);
#endif /* NSS_DISABLE_ECC */
return rv;
}
/*
** Perform a raw public-key operation
** Length of input and output buffers are equal to key's modulus len.
*/
SECStatus
RSA_PublicKeyOp(RSAPublicKey *key,
unsigned char *output,
const unsigned char *input)
{
unsigned int modLen, expLen, offset;
mp_int n, e, m, c;
mp_err err = MP_OKAY;
SECStatus rv = SECSuccess;
if (!key || !output || !input) {
PORT_SetError(SEC_ERROR_INVALID_ARGS);
return SECFailure;
}
MP_DIGITS(&n) = 0;
MP_DIGITS(&e) = 0;
MP_DIGITS(&m) = 0;
MP_DIGITS(&c) = 0;
CHECK_MPI_OK( mp_init(&n) );
CHECK_MPI_OK( mp_init(&e) );
CHECK_MPI_OK( mp_init(&m) );
CHECK_MPI_OK( mp_init(&c) );
modLen = rsa_modulusLen(&key->modulus);
expLen = rsa_modulusLen(&key->publicExponent);
/* 1. Obtain public key (n, e) */
if (BAD_RSA_KEY_SIZE(modLen, expLen)) {
PORT_SetError(SEC_ERROR_INVALID_KEY);
rv = SECFailure;
goto cleanup;
}
SECITEM_TO_MPINT(key->modulus, &n);
SECITEM_TO_MPINT(key->publicExponent, &e);
if (e.used > n.used) {
/* exponent should not be greater than modulus */
PORT_SetError(SEC_ERROR_INVALID_KEY);
rv = SECFailure;
goto cleanup;
}
/* 2. check input out of range (needs to be in range [0..n-1]) */
offset = (key->modulus.data[0] == 0) ? 1 : 0; /* may be leading 0 */
if (memcmp(input, key->modulus.data + offset, modLen) >= 0) {
PORT_SetError(SEC_ERROR_INPUT_LEN);
rv = SECFailure;
goto cleanup;
}
/* 2 bis. Represent message as integer in range [0..n-1] */
CHECK_MPI_OK( mp_read_unsigned_octets(&m, input, modLen) );
/* 3. Compute c = m**e mod n */
#ifdef USE_MPI_EXPT_D
/* XXX see which is faster */
if (MP_USED(&e) == 1) {
CHECK_MPI_OK( mp_exptmod_d(&m, MP_DIGIT(&e, 0), &n, &c) );
} else
#endif
CHECK_MPI_OK( mp_exptmod(&m, &e, &n, &c) );
/* 4. result c is ciphertext */
err = mp_to_fixlen_octets(&c, output, modLen);
if (err >= 0) err = MP_OKAY;
cleanup:
mp_clear(&n);
mp_clear(&e);
mp_clear(&m);
mp_clear(&c);
if (err) {
MP_TO_SEC_ERROR(err);
rv = SECFailure;
}
return rv;
}