/*******************************************************************************
* Function Name: ModbusUART_SetPins
********************************************************************************
*
* Summary:
* Sets the pins settings accordingly to the selected operation mode.
* Only available in the Unconfigured operation mode. The mode specific
* initialization function calls it.
* Pins configuration is set by PSoC Creator when a specific mode of operation
* is selected in design time.
*
* Parameters:
* mode: Mode of SCB operation.
* subMode: Sub-mode of SCB operation. It is only required for SPI and UART
* modes.
* uartEnableMask: enables TX or RX direction and RTS and CTS signals.
*
* Return:
* None
*
*******************************************************************************/
void ModbusUART_SetPins(uint32 mode, uint32 subMode, uint32 uartEnableMask)
{
uint32 hsiomSel [ModbusUART_SCB_PINS_NUMBER];
uint32 pinsDm [ModbusUART_SCB_PINS_NUMBER];
#if (!ModbusUART_CY_SCBIP_V1)
uint32 pinsInBuf = 0u;
#endif /* (!ModbusUART_CY_SCBIP_V1) */
uint32 i;
/* Set default HSIOM to GPIO and Drive Mode to Analog Hi-Z */
for(i = 0u; i < ModbusUART_SCB_PINS_NUMBER; i++)
{
hsiomSel[i] = ModbusUART_HSIOM_DEF_SEL;
pinsDm[i] = ModbusUART_PIN_DM_ALG_HIZ;
}
if((ModbusUART_SCB_MODE_I2C == mode) ||
(ModbusUART_SCB_MODE_EZI2C == mode))
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_I2C_SEL;
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_I2C_SEL;
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
}
#if (!ModbusUART_CY_SCBIP_V1)
else if(ModbusUART_SCB_MODE_SPI == mode)
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
hsiomSel[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
if(ModbusUART_SPI_SLAVE == subMode)
{
/* Slave */
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsDm[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
#if(ModbusUART_SS0_PIN)
/* Only SS0 is valid choice for Slave */
hsiomSel[ModbusUART_SS0_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS0_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_MISO_SDA_TX_PIN)
/* Disable input buffer */
pinsInBuf |= ModbusUART_MISO_SDA_TX_PIN_MASK;
#endif /* (ModbusUART_MISO_SDA_TX_PIN_PIN) */
}
else /* (Master) */
{
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
pinsDm[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#if(ModbusUART_SS0_PIN)
hsiomSel [ModbusUART_SS0_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS0_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsInBuf |= ModbusUART_SS0_PIN_MASK;
#endif /* (ModbusUART_SS0_PIN) */
#if(ModbusUART_SS1_PIN)
hsiomSel [ModbusUART_SS1_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS1_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsInBuf |= ModbusUART_SS1_PIN_MASK;
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS2_PIN)
hsiomSel [ModbusUART_SS2_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS2_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsInBuf |= ModbusUART_SS2_PIN_MASK;
#endif /* (ModbusUART_SS2_PIN) */
#if(ModbusUART_SS3_PIN)
hsiomSel [ModbusUART_SS3_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS3_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsInBuf |= ModbusUART_SS3_PIN_MASK;
#endif /* (ModbusUART_SS2_PIN) */
/* Disable input buffers */
#if(ModbusUART_MOSI_SCL_RX_PIN)
pinsInBuf |= ModbusUART_MOSI_SCL_RX_PIN_MASK;
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_MOSI_SCL_RX_WAKE_PIN)
pinsInBuf |= ModbusUART_MOSI_SCL_RX_WAKE_PIN_MASK;
#endif /* (ModbusUART_MOSI_SCL_RX_WAKE_PIN) */
#if(ModbusUART_SCLK_PIN)
pinsInBuf |= ModbusUART_SCLK_PIN_MASK;
#endif /* (ModbusUART_SCLK_PIN) */
}
}
else /* UART */
{
if(ModbusUART_UART_MODE_SMARTCARD == subMode)
{
/* SmartCard */
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
}
else /* Standard or IrDA */
{
if(0u != (ModbusUART_UART_RX_PIN_ENABLE & uartEnableMask))
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
}
if(0u != (ModbusUART_UART_TX_PIN_ENABLE & uartEnableMask))
{
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#if(ModbusUART_MISO_SDA_TX_PIN)
pinsInBuf |= ModbusUART_MISO_SDA_TX_PIN_MASK;
#endif /* (ModbusUART_MISO_SDA_TX_PIN_PIN) */
}
#if !(ModbusUART_CY_SCBIP_V0 || ModbusUART_CY_SCBIP_V1)
if(ModbusUART_UART_MODE_STD == subMode)
{
if(0u != (ModbusUART_UART_CTS_PIN_ENABLE & uartEnableMask))
{
/* CTS input is multiplexed with SCLK */
hsiomSel[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_SCLK_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
}
if(0u != (ModbusUART_UART_RTS_PIN_ENABLE & uartEnableMask))
{
/* RTS output is multiplexed with SS0 */
hsiomSel[ModbusUART_SS0_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_SS0_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#if(ModbusUART_SS0_PIN)
/* Disable input buffer */
pinsInBuf |= ModbusUART_SS0_PIN_MASK;
#endif /* (ModbusUART_SS0_PIN) */
}
}
#endif /* !(ModbusUART_CY_SCBIP_V0 || ModbusUART_CY_SCBIP_V1) */
}
}
#endif /* (!ModbusUART_CY_SCBIP_V1) */
/* Configure pins: set HSIOM, DM and InputBufEnable */
/* Note: the DR register settings do not effect the pin output if HSIOM is other than GPIO */
#if(ModbusUART_MOSI_SCL_RX_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MOSI_SCL_RX_HSIOM_REG,
ModbusUART_MOSI_SCL_RX_HSIOM_MASK,
ModbusUART_MOSI_SCL_RX_HSIOM_POS,
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX]);
ModbusUART_spi_mosi_i2c_scl_uart_rx_SetDriveMode((uint8) pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX]);
#if (!ModbusUART_CY_SCBIP_V1)
ModbusUART_SET_INP_DIS(ModbusUART_spi_mosi_i2c_scl_uart_rx_INP_DIS,
ModbusUART_spi_mosi_i2c_scl_uart_rx_MASK,
(0u != (pinsInBuf & ModbusUART_MOSI_SCL_RX_PIN_MASK)));
#endif /* (!ModbusUART_CY_SCBIP_V1) */
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_MOSI_SCL_RX_WAKE_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_REG,
ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_MASK,
ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_POS,
hsiomSel[ModbusUART_MOSI_SCL_RX_WAKE_PIN_INDEX]);
ModbusUART_spi_mosi_i2c_scl_uart_rx_wake_SetDriveMode((uint8)
pinsDm[ModbusUART_MOSI_SCL_RX_WAKE_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_mosi_i2c_scl_uart_rx_wake_INP_DIS,
ModbusUART_spi_mosi_i2c_scl_uart_rx_wake_MASK,
(0u != (pinsInBuf & ModbusUART_MOSI_SCL_RX_WAKE_PIN_MASK)));
/* Set interrupt on falling edge */
ModbusUART_SET_INCFG_TYPE(ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_REG,
ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_TYPE_MASK,
ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_TYPE_POS,
ModbusUART_INTCFG_TYPE_FALLING_EDGE);
#endif /* (ModbusUART_MOSI_SCL_RX_WAKE_PIN) */
#if(ModbusUART_MISO_SDA_TX_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MISO_SDA_TX_HSIOM_REG,
ModbusUART_MISO_SDA_TX_HSIOM_MASK,
ModbusUART_MISO_SDA_TX_HSIOM_POS,
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX]);
ModbusUART_spi_miso_i2c_sda_uart_tx_SetDriveMode((uint8) pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX]);
#if (!ModbusUART_CY_SCBIP_V1)
ModbusUART_SET_INP_DIS(ModbusUART_spi_miso_i2c_sda_uart_tx_INP_DIS,
ModbusUART_spi_miso_i2c_sda_uart_tx_MASK,
(0u != (pinsInBuf & ModbusUART_MISO_SDA_TX_PIN_MASK)));
#endif /* (!ModbusUART_CY_SCBIP_V1) */
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_SCLK_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SCLK_HSIOM_REG, ModbusUART_SCLK_HSIOM_MASK,
ModbusUART_SCLK_HSIOM_POS, hsiomSel[ModbusUART_SCLK_PIN_INDEX]);
ModbusUART_spi_sclk_SetDriveMode((uint8) pinsDm[ModbusUART_SCLK_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_sclk_INP_DIS,
ModbusUART_spi_sclk_MASK,
(0u != (pinsInBuf & ModbusUART_SCLK_PIN_MASK)));
#endif /* (ModbusUART_SCLK_PIN) */
#if(ModbusUART_SS0_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS0_HSIOM_REG, ModbusUART_SS0_HSIOM_MASK,
ModbusUART_SS0_HSIOM_POS, hsiomSel[ModbusUART_SS0_PIN_INDEX]);
ModbusUART_spi_ss0_SetDriveMode((uint8) pinsDm[ModbusUART_SS0_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_ss0_INP_DIS,
ModbusUART_spi_ss0_MASK,
(0u != (pinsInBuf & ModbusUART_SS0_PIN_MASK)));
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS1_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS1_HSIOM_REG, ModbusUART_SS1_HSIOM_MASK,
ModbusUART_SS1_HSIOM_POS, hsiomSel[ModbusUART_SS1_PIN_INDEX]);
ModbusUART_spi_ss1_SetDriveMode((uint8) pinsDm[ModbusUART_SS1_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_ss1_INP_DIS,
ModbusUART_spi_ss1_MASK,
(0u != (pinsInBuf & ModbusUART_SS1_PIN_MASK)));
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS2_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS2_HSIOM_REG, ModbusUART_SS2_HSIOM_MASK,
ModbusUART_SS2_HSIOM_POS, hsiomSel[ModbusUART_SS2_PIN_INDEX]);
ModbusUART_spi_ss2_SetDriveMode((uint8) pinsDm[ModbusUART_SS2_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_ss2_INP_DIS,
ModbusUART_spi_ss2_MASK,
(0u != (pinsInBuf & ModbusUART_SS2_PIN_MASK)));
#endif /* (ModbusUART_SS2_PIN) */
#if(ModbusUART_SS3_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS3_HSIOM_REG, ModbusUART_SS3_HSIOM_MASK,
ModbusUART_SS3_HSIOM_POS, hsiomSel[ModbusUART_SS3_PIN_INDEX]);
ModbusUART_spi_ss3_SetDriveMode((uint8) pinsDm[ModbusUART_SS3_PIN_INDEX]);
ModbusUART_SET_INP_DIS(ModbusUART_spi_ss3_INP_DIS,
ModbusUART_spi_ss3_MASK,
(0u != (pinsInBuf & ModbusUART_SS3_PIN_MASK)));
#endif /* (ModbusUART_SS3_PIN) */
}
/*******************************************************************************
* Function Name: ModbusUART_SetPins
********************************************************************************
*
* Summary:
* Sets pins settings accordingly to selected operation mode.
* Only available in Unconfigured operation mode. The mode specific
* initialization function calls it.
* Pins configuration is set by PSoC Creator when specific mode of operation
* selected in design time.
*
* Parameters:
* mode: Mode of SCB operation.
* subMode: Submode of SCB operation. It is only required for SPI and UART
* modes.
* uartTxRx: Direction for UART.
*
* Return:
* None
*
*******************************************************************************/
void ModbusUART_SetPins(uint32 mode, uint32 subMode, uint32 uartTxRx)
{
uint32 hsiomSel[ModbusUART_SCB_PINS_NUMBER];
uint32 pinsDm [ModbusUART_SCB_PINS_NUMBER];
uint32 i;
/* Make all unused */
for(i = 0u; i < ModbusUART_SCB_PINS_NUMBER; i++)
{
hsiomSel[i] = ModbusUART_HSIOM_DEF_SEL;
pinsDm[i] = ModbusUART_PIN_DM_ALG_HIZ;
}
/* Choice the Dm and HSIOM */
if((ModbusUART_SCB_MODE_I2C == mode) ||
(ModbusUART_SCB_MODE_EZI2C == mode))
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_I2C_SEL;
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_I2C_SEL;
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
}
else if(ModbusUART_SCB_MODE_SPI == mode)
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
hsiomSel[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
if(ModbusUART_SPI_SLAVE == subMode)
{
/* Slave */
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsDm[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
#if(ModbusUART_SS0_PIN)
/* Only SS0 is valid choice for Slave */
hsiomSel[ModbusUART_SS0_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS0_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
#endif /* (ModbusUART_SS1_PIN) */
}
else /* (Master) */
{
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
pinsDm[ModbusUART_SCLK_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#if(ModbusUART_SS0_PIN)
hsiomSel[ModbusUART_SS0_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS0_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#endif /* (ModbusUART_SS0_PIN) */
#if(ModbusUART_SS1_PIN)
hsiomSel[ModbusUART_SS1_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS1_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS2_PIN)
hsiomSel[ModbusUART_SS2_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS2_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#endif /* (ModbusUART_SS2_PIN) */
#if(ModbusUART_SS3_PIN)
hsiomSel[ModbusUART_SS3_PIN_INDEX] = ModbusUART_HSIOM_SPI_SEL;
pinsDm [ModbusUART_SS3_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
#endif /* (ModbusUART_SS2_PIN) */
}
}
else /* UART */
{
if(ModbusUART_UART_MODE_SMARTCARD == subMode)
{
/* SmartCard */
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_OD_LO;
}
else /* Standard or IrDA */
{
if(0u != (ModbusUART_UART_RX & uartTxRx))
{
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MOSI_SCL_RX_PIN_INDEX] = ModbusUART_PIN_DM_DIG_HIZ;
}
if(0u != (ModbusUART_UART_TX & uartTxRx))
{
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_HSIOM_UART_SEL;
pinsDm [ModbusUART_MISO_SDA_TX_PIN_INDEX] = ModbusUART_PIN_DM_STRONG;
}
}
}
/* Condfigure pins: set HSIOM and DM */
/* Condfigure pins: DR registers configuration remains unchanged for cyfitter_cfg() */
#if(ModbusUART_MOSI_SCL_RX_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MOSI_SCL_RX_HSIOM_REG,
ModbusUART_MOSI_SCL_RX_HSIOM_MASK,
ModbusUART_MOSI_SCL_RX_HSIOM_POS,
hsiomSel[ModbusUART_MOSI_SCL_RX_PIN_INDEX]);
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_MOSI_SCL_RX_WAKE_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_REG,
ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_MASK,
ModbusUART_MOSI_SCL_RX_WAKE_HSIOM_POS,
hsiomSel[ModbusUART_MOSI_SCL_RX_WAKE_PIN_INDEX]);
#endif /* (ModbusUART_MOSI_SCL_RX_WAKE_PIN) */
#if(ModbusUART_MISO_SDA_TX_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_MISO_SDA_TX_HSIOM_REG,
ModbusUART_MISO_SDA_TX_HSIOM_MASK,
ModbusUART_MISO_SDA_TX_HSIOM_POS,
hsiomSel[ModbusUART_MISO_SDA_TX_PIN_INDEX]);
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_SCLK_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SCLK_HSIOM_REG, ModbusUART_SCLK_HSIOM_MASK,
ModbusUART_SCLK_HSIOM_POS, hsiomSel[ModbusUART_SCLK_PIN_INDEX]);
#endif /* (ModbusUART_SCLK_PIN) */
#if(ModbusUART_SS0_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS0_HSIOM_REG, ModbusUART_SS0_HSIOM_MASK,
ModbusUART_SS0_HSIOM_POS, hsiomSel[ModbusUART_SS0_PIN_INDEX]);
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS1_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS1_HSIOM_REG, ModbusUART_SS1_HSIOM_MASK,
ModbusUART_SS1_HSIOM_POS, hsiomSel[ModbusUART_SS1_PIN_INDEX]);
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS2_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS2_HSIOM_REG, ModbusUART_SS2_HSIOM_MASK,
ModbusUART_SS2_HSIOM_POS, hsiomSel[ModbusUART_SS2_PIN_INDEX]);
#endif /* (ModbusUART_SS2_PIN) */
#if(ModbusUART_SS3_PIN)
ModbusUART_SET_HSIOM_SEL(ModbusUART_SS3_HSIOM_REG, ModbusUART_SS3_HSIOM_MASK,
ModbusUART_SS3_HSIOM_POS, hsiomSel[ModbusUART_SS3_PIN_INDEX]);
#endif /* (ModbusUART_SS3_PIN) */
#if(ModbusUART_MOSI_SCL_RX_PIN)
ModbusUART_spi_mosi_i2c_scl_uart_rx_SetDriveMode((uint8)
pinsDm[ModbusUART_MOSI_SCL_RX_PIN_INDEX]);
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_MOSI_SCL_RX_WAKE_PIN)
ModbusUART_spi_mosi_i2c_scl_uart_rx_wake_SetDriveMode((uint8)
pinsDm[ModbusUART_MOSI_SCL_RX_WAKE_PIN_INDEX]);
/* Set interrupt on rising edge */
ModbusUART_SET_INCFG_TYPE(ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_REG,
ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_TYPE_MASK,
ModbusUART_MOSI_SCL_RX_WAKE_INTCFG_TYPE_POS,
ModbusUART_INTCFG_TYPE_FALLING_EDGE);
#endif /* (ModbusUART_MOSI_SCL_RX_WAKE_PIN) */
#if(ModbusUART_MISO_SDA_TX_PIN)
ModbusUART_spi_miso_i2c_sda_uart_tx_SetDriveMode((uint8)
pinsDm[ModbusUART_MISO_SDA_TX_PIN_INDEX]);
#endif /* (ModbusUART_MOSI_SCL_RX_PIN) */
#if(ModbusUART_SCLK_PIN)
ModbusUART_spi_sclk_SetDriveMode((uint8) pinsDm[ModbusUART_SCLK_PIN_INDEX]);
#endif /* (ModbusUART_SCLK_PIN) */
#if(ModbusUART_SS0_PIN)
ModbusUART_spi_ss0_SetDriveMode((uint8) pinsDm[ModbusUART_SS0_PIN_INDEX]);
#endif /* (ModbusUART_SS0_PIN) */
#if(ModbusUART_SS1_PIN)
ModbusUART_spi_ss1_SetDriveMode((uint8) pinsDm[ModbusUART_SS1_PIN_INDEX]);
#endif /* (ModbusUART_SS1_PIN) */
#if(ModbusUART_SS2_PIN)
ModbusUART_spi_ss2_SetDriveMode((uint8) pinsDm[ModbusUART_SS2_PIN_INDEX]);
#endif /* (ModbusUART_SS2_PIN) */
#if(ModbusUART_SS3_PIN)
ModbusUART_spi_ss3_SetDriveMode((uint8) pinsDm[ModbusUART_SS3_PIN_INDEX]);
#endif /* (ModbusUART_SS3_PIN) */
}