qboolean G2API_GetBoltMatrix_SPMethod(CGhoul2Info_v &ghoul2, const int modelIndex, const int boltIndex, mdxaBone_t *matrix, const vec3_t angles,
const vec3_t position, const int frameNum, qhandle_t *modelList, const vec3_t scale )
{
assert(ghoul2.size() > modelIndex);
if ((int)&ghoul2 && (ghoul2.size() > modelIndex))
{
CGhoul2Info *ghlInfo = &ghoul2[modelIndex];
//assert(boltIndex < ghlInfo->mBltlist.size());
if (ghlInfo && (boltIndex < ghlInfo->mBltlist.size()) && boltIndex >= 0 )
{
// make sure we have transformed the skeleton
if (!gG2_GBMNoReconstruct)
{
G2_ConstructGhoulSkeleton(ghoul2, frameNum, modelList, true, angles, position, scale, false);
}
gG2_GBMNoReconstruct = qfalse;
mdxaBone_t scaled;
mdxaBone_t *use;
use=&ghlInfo->mBltlist[boltIndex].position;
if (scale[0]||scale[1]||scale[2])
{
scaled=*use;
use=&scaled;
// scale the bolt position by the scale factor for this model since at this point its still in model space
if (scale[0])
{
scaled.matrix[0][3] *= scale[0];
}
if (scale[1])
{
scaled.matrix[1][3] *= scale[1];
}
if (scale[2])
{
scaled.matrix[2][3] *= scale[2];
}
}
// pre generate the world matrix
G2_GenerateWorldMatrix(angles, position);
VectorNormalize((float*)use->matrix[0]);
VectorNormalize((float*)use->matrix[1]);
VectorNormalize((float*)use->matrix[2]);
Multiply_3x4Matrix(matrix, &worldMatrix, use);
return qtrue;
}
}
return qfalse;
}
qboolean G2API_GetBoltMatrix(CGhoul2Info_v &ghoul2, const int modelIndex, const int boltIndex, mdxaBone_t *matrix, const vec3_t angles, const vec3_t position, const int frameNum, qhandle_t *modelList, vec3_t scale )
{
assert(ghoul2.size() > modelIndex);
if (gG2_GBMUseSPMethod)
{
gG2_GBMUseSPMethod = qfalse;
return G2API_GetBoltMatrix_SPMethod(ghoul2, modelIndex, boltIndex, matrix, angles, position, frameNum, modelList, scale);
}
if ((int)&ghoul2 && (ghoul2.size() > modelIndex))
{
CGhoul2Info *ghlInfo = &ghoul2[modelIndex];
//assert(boltIndex < ghlInfo->mBltlist.size());
if (ghlInfo && (boltIndex < ghlInfo->mBltlist.size()) && boltIndex >= 0 )
{
// make sure we have transformed the skeleton
if (!gG2_GBMNoReconstruct)
{
G2_ConstructGhoulSkeleton(ghoul2, frameNum, modelList, true, angles, position, scale, false);
}
gG2_GBMNoReconstruct = qfalse;
mdxaBone_t scaled;
mdxaBone_t *use;
use=&ghlInfo->mBltlist[boltIndex].position;
if (scale[0]||scale[1]||scale[2])
{
scaled=*use;
use=&scaled;
// scale the bolt position by the scale factor for this model since at this point its still in model space
if (scale[0])
{
scaled.matrix[0][3] *= scale[0];
}
if (scale[1])
{
scaled.matrix[1][3] *= scale[1];
}
if (scale[2])
{
scaled.matrix[2][3] *= scale[2];
}
}
// pre generate the world matrix
G2_GenerateWorldMatrix(angles, position);
// for some reason we get the end matrix rotated by 90 degrees
mdxaBone_t rotMat, tempMatrix;
vec3_t newangles = {0,270,0};
Create_Matrix(newangles, &rotMat);
// make the model space matrix we have for this bolt into a world matrix
// Multiply_3x4Matrix(matrix, &worldMatrix,use);
Multiply_3x4Matrix(&tempMatrix, &worldMatrix,use);
vec3_t origin;
origin[0] = tempMatrix.matrix[0][3];
origin[1] = tempMatrix.matrix[1][3];
origin[2] = tempMatrix.matrix[2][3];
tempMatrix.matrix[0][3] = tempMatrix.matrix[1][3] = tempMatrix.matrix[2][3] = 0;
Multiply_3x4Matrix(matrix, &tempMatrix, &rotMat);
matrix->matrix[0][3] = origin[0];
matrix->matrix[1][3] = origin[1];
matrix->matrix[2][3] = origin[2];
return qtrue;
}
}
return qfalse;
}
qboolean G2API_GetBoltMatrix_SPMethod(g2handle_t g2h, const int modelIndex, const int boltIndex, mdxaBone_t *matrix, const vec3_t angles,
const vec3_t position, const int frameNum, const qhandle_t *modelList, const vec3_t scale )
{
CGhoul2Info_v *ghoul2 = G2API_GetGhoul2Model(g2h);
if (ghoul2 && (unsigned)modelIndex < ghoul2->size())
{
CGhoul2Info &ghlInfo = (*ghoul2)[modelIndex];
//assert(boltIndex < ghlInfo->mBltlist.size());
if ((unsigned)boltIndex < ghlInfo.mBltlist.size())
{
// make sure we have transformed the skeleton
if (ghlInfo.mSkelFrameNum != frameNum)
{
// make sure it's initialized even if noreconstruct is on
if (!gG2_GBMNoReconstruct || ghlInfo.mSkelFrameNum == -1)
{
G2_ConstructGhoulSkeleton(*ghoul2, frameNum, modelList, true, angles, position, scale, false);
}
}
gG2_GBMNoReconstruct = qfalse;
mdxaBone_t scaled;
mdxaBone_t *use;
use = &ghlInfo.mBltlist[boltIndex].position;
if (scale[0]||scale[1]||scale[2])
{
scaled=*use;
use=&scaled;
// scale the bolt position by the scale factor for this model since at this point its still in model space
if (scale[0])
{
scaled.matrix[0][3] *= scale[0];
}
if (scale[1])
{
scaled.matrix[1][3] *= scale[1];
}
if (scale[2])
{
scaled.matrix[2][3] *= scale[2];
}
}
// pre generate the world matrix
G2_GenerateWorldMatrix(angles, position);
VectorNormalize((float*)use->matrix[0]);
VectorNormalize((float*)use->matrix[1]);
VectorNormalize((float*)use->matrix[2]);
Multiply_3x4Matrix(matrix, &worldMatrix, use);
return qtrue;
}
}
return qfalse;
}
// generate a matrix for a given bone given some new angles for it.
void G2_Generate_Matrix(const model_t *mod, boneInfo_v &blist, int index, const float *angles, int flags,
const Eorientations up, const Eorientations left, const Eorientations forward)
{
mdxaSkel_t *skel;
mdxaSkelOffsets_t *offsets;
mdxaBone_t temp1;
mdxaBone_t permutation;
mdxaBone_t *boneOverride = &blist[index].matrix;
vec3_t newAngles;
if (flags & (BONE_ANGLES_PREMULT | BONE_ANGLES_POSTMULT))
{
// build us a matrix out of the angles we are fed - but swap y and z because of wacky Quake setup
vec3_t newAngles;
// determine what axis newAngles Yaw should revolve around
switch (up)
{
case NEGATIVE_X:
newAngles[1] = angles[2] + 180;
break;
case POSITIVE_X:
newAngles[1] = angles[2];
break;
case NEGATIVE_Y:
newAngles[1] = angles[0];
break;
case POSITIVE_Y:
newAngles[1] = angles[0];
break;
case NEGATIVE_Z:
newAngles[1] = angles[1] + 180;
break;
case POSITIVE_Z:
newAngles[1] = angles[1];
break;
}
// determine what axis newAngles pitch should revolve around
switch (left)
{
case NEGATIVE_X:
newAngles[0] = angles[2];
break;
case POSITIVE_X:
newAngles[0] = angles[2] + 180;
break;
case NEGATIVE_Y:
newAngles[0] = angles[0];
break;
case POSITIVE_Y:
newAngles[0] = angles[0] + 180;
break;
case NEGATIVE_Z:
newAngles[0] = angles[1];
break;
case POSITIVE_Z:
newAngles[0] = angles[1];
break;
}
// determine what axis newAngles Roll should revolve around
switch (forward)
{
case NEGATIVE_X:
newAngles[2] = angles[2];
break;
case POSITIVE_X:
newAngles[2] = angles[2];
break;
case NEGATIVE_Y:
newAngles[2] = angles[0];
break;
case POSITIVE_Y:
newAngles[2] = angles[0] + 180;
break;
case NEGATIVE_Z:
newAngles[2] = angles[1];
break;
case POSITIVE_Z:
newAngles[2] = angles[1] + 180;
break;
}
Create_Matrix(newAngles, boneOverride);
// figure out where the bone hirearchy info is
offsets = (mdxaSkelOffsets_t *)((byte *)mod->mdxa + sizeof(mdxaHeader_t));
skel = (mdxaSkel_t *)((byte *)mod->mdxa + sizeof(mdxaHeader_t) + offsets->offsets[blist[index].boneNumber]);
Multiply_3x4Matrix(&temp1, boneOverride,&skel->BasePoseMatInv);
Multiply_3x4Matrix(boneOverride,&skel->BasePoseMat, &temp1);
}
else
{
VectorCopy(angles, newAngles);
// why I should need do this F**k alone knows. But I do.
if (left == POSITIVE_Y)
{
newAngles[0] +=180;
}
Create_Matrix(newAngles, &temp1);
permutation.matrix[0][0] = permutation.matrix[0][1] = permutation.matrix[0][2] = permutation.matrix[0][3] = 0;
permutation.matrix[1][0] = permutation.matrix[1][1] = permutation.matrix[1][2] = permutation.matrix[1][3] = 0;
permutation.matrix[2][0] = permutation.matrix[2][1] = permutation.matrix[2][2] = permutation.matrix[2][3] = 0;
// determine what axis newAngles Yaw should revolve around
switch (forward)
{
case NEGATIVE_X:
permutation.matrix[0][0] = -1; // works
break;
case POSITIVE_X:
permutation.matrix[0][0] = 1; // works
break;
case NEGATIVE_Y:
permutation.matrix[1][0] = -1;
break;
case POSITIVE_Y:
permutation.matrix[1][0] = 1;
break;
case NEGATIVE_Z:
permutation.matrix[2][0] = -1;
break;
case POSITIVE_Z:
permutation.matrix[2][0] = 1;
break;
}
// determine what axis newAngles pitch should revolve around
switch (left)
{
case NEGATIVE_X:
permutation.matrix[0][1] = -1;
break;
case POSITIVE_X:
permutation.matrix[0][1] = 1;
break;
case NEGATIVE_Y:
permutation.matrix[1][1] = -1; // works
break;
case POSITIVE_Y:
permutation.matrix[1][1] = 1; // works
break;
case NEGATIVE_Z:
permutation.matrix[2][1] = -1;
break;
case POSITIVE_Z:
permutation.matrix[2][1] = 1;
break;
}
// determine what axis newAngles Roll should revolve around
switch (up)
{
case NEGATIVE_X:
permutation.matrix[0][2] = -1;
break;
case POSITIVE_X:
permutation.matrix[0][2] = 1;
break;
case NEGATIVE_Y:
permutation.matrix[1][2] = -1;
break;
case POSITIVE_Y:
permutation.matrix[1][2] = 1;
break;
case NEGATIVE_Z:
permutation.matrix[2][2] = -1; // works
break;
case POSITIVE_Z:
permutation.matrix[2][2] = 1; // works
break;
}
Multiply_3x4Matrix(boneOverride, &temp1,&permutation);
}
// keep a copy of the matrix in the newmatrix which is actually what we use
memcpy(&blist[index].newMatrix, &blist[index].matrix, sizeof(mdxaBone_t));
}
