Ejemplo n.º 1
0
void NvRmPmuGetBatteryFullLifeTime( 
    NvRmDeviceHandle hRmDevice,
    NvRmPmuBatteryInstance batteryInst,
    NvU32 * pLifeTime )
{
    if (!s_PmuSupportedEnv)
        return;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    NvOdmPmuGetBatteryFullLifeTime(
        s_Pmu.hOdmPmu,(NvOdmPmuBatteryInstance)batteryInst, pLifeTime);
    NvOsMutexUnlock(s_Pmu.hMutex);
}
Ejemplo n.º 2
0
void NvRmPowerEventNotify(
    NvRmDeviceHandle hRmDeviceHandle,
    NvRmPowerEvent Event)
{
    NV_ASSERT(hRmDeviceHandle);

    // Just in case
    if (Event == NvRmPowerEvent_NoEvent)
         return;

    NvOsMutexLock(s_hPowerClientMutex);
    PowerEventNotify(hRmDeviceHandle, Event);
    NvOsMutexUnlock(s_hPowerClientMutex);
}
Ejemplo n.º 3
0
static ssize_t tegra_battery_store_property(
		struct device *dev,
		struct device_attribute *attr,
		const char *buf,
		size_t count)
{
	unsigned int value = 0;
	value = simple_strtoul(buf, NULL, 0);
    NvOsMutexLock(batt_dev->hBattEventMutex);
	batt_dev->batt_status_poll_period = value;
    NvOsMutexUnlock(batt_dev->hBattEventMutex);
	NvOsSemaphoreSignal(batt_dev->hOdmSemaphore);
	return count;
}
Ejemplo n.º 4
0
NvError
NvRmPowerStarvationHintMulti(
    NvRmDeviceHandle hRmDeviceHandle,
    NvU32 ClientId,
    const NvRmDfsStarvationHint* pMultiHint,
    NvU32 NumHints)
{
    NvError error;
    NvRmPowerClient* pPowerClient = NULL;
    NvRmPowerRegistry* pRegistry = &s_PowerRegistry;
    NvU32 ClientIndex = NVRM_POWER_ID2INDEX(ClientId);

    NV_ASSERT(hRmDeviceHandle);
    NV_ASSERT(pMultiHint && NumHints);

    /* Do nothing on platforms where there is no freq scaling like QT and FPGA */
    if (NvRmPrivGetExecPlatform(hRmDeviceHandle) != ExecPlatform_Soc)
    {
        return NvSuccess;
    }
    // Do nothing if DFS is disabled, and therefore all clocks are maxed anyway
    if (NvRmDfsGetState(hRmDeviceHandle) <= NvRmDfsRunState_Disabled)
    {
        return NvSuccess;
    }

    NvOsMutexLock(s_hPowerClientMutex);

    // Check if this client ID was registered; return error otherwise
    if (ClientIndex < pRegistry->UsedIndexRange)
    {
        pPowerClient = pRegistry->pPowerClients[ClientIndex];
    }
    if ((pPowerClient == NULL) || (pPowerClient->id != ClientId))
    {
        NvOsMutexUnlock(s_hPowerClientMutex);
        return NvError_BadValue;
    }
    // Add new stravtion hint
    error = RecordStarvationHints(
        hRmDeviceHandle, pPowerClient, pMultiHint, NumHints);

    NvOsMutexUnlock(s_hPowerClientMutex);

    if (error == NvSuccess)
        NvRmPrivStarvationHintPrintf(
            ClientIndex, pPowerClient->tag, pMultiHint, NumHints);
    return error;
}
Ejemplo n.º 5
0
void NvBatteryEventHandlerThread(void *args)
{
	NvU8	BatteryState = 0, BatteryEvent = 0;
	NvBool  suspend_flag;

	for (;;) {
        NvOsSemaphoreWaitTimeout(batt_dev->hOdmSemaphore, 
		                         batt_dev->batt_status_poll_period);
		
		if (batt_dev->exitThread)
			break;

		if (!batt_dev->hOdmBattDev)
			continue;
        
        NvOsMutexLock(batt_dev->hBattEventMutex);
	    suspend_flag = batt_dev->inSuspend;
        NvOsMutexUnlock(batt_dev->hBattEventMutex);
		if (suspend_flag)
			continue;

	    pr_info("\tBATTERY: polling battery information! --->>>\n");
		
		NvOdmBatteryGetBatteryStatus(batt_dev->hOdmBattDev,
			NvOdmBatteryInst_Main,
			&BatteryState);

		NvOdmBatteryGetEvent(batt_dev->hOdmBattDev, &BatteryEvent);

		if ((BatteryState == NVODM_BATTERY_STATUS_UNKNOWN) ||
			(BatteryEvent == NvOdmBatteryEventType_Num)) {
			/* Do nothing */
		} else {
			if (BatteryEvent & NvOdmBatteryEventType_RemainingCapacityAlarm) {
				if (BatteryState == (NVODM_BATTERY_STATUS_CRITICAL |
					NVODM_BATTERY_STATUS_VERY_CRITICAL |
					NVODM_BATTERY_STATUS_DISCHARGING)) {
					pr_info("nvec_battery:calling kernel_power_off...\n");
					kernel_power_off();
				}
			} else {
				/* Update the battery and power supply info for other events */
				power_supply_changed(&tegra_power_supplies[NvCharger_Type_Battery]);
				//power_supply_changed(&tegra_power_supplies[NvCharger_Type_USB]); //
				power_supply_changed(&tegra_power_supplies[NvCharger_Type_AC]);
			}
		}
	}
}
Ejemplo n.º 6
0
NvBool
NvRmPmuIsRtcInitialized(
    NvRmDeviceHandle hRmDevice)
{
    NvBool ReturnStatus = NV_FALSE;

    if (!s_PmuSupportedEnv)
        return NV_FALSE;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    ReturnStatus = NvOdmPmuIsRtcInitialized(s_Pmu.hOdmPmu);
    NvOsMutexUnlock(s_Pmu.hMutex);
    return ReturnStatus;
}
Ejemplo n.º 7
0
void NvRmPmuGetBatteryChemistry( 
    NvRmDeviceHandle hRmDevice,
    NvRmPmuBatteryInstance batteryInst,
    NvRmPmuBatteryChemistry * pChemistry )
{
    if (!s_PmuSupportedEnv)
        return;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    NvOdmPmuGetBatteryChemistry(s_Pmu.hOdmPmu,
                                (NvOdmPmuBatteryInstance)batteryInst,
                                (NvOdmPmuBatteryChemistry*)pChemistry);
    NvOsMutexUnlock(s_Pmu.hMutex);
}
Ejemplo n.º 8
0
NvError
NvRmKernelPowerSuspend( NvRmDeviceHandle hRmDeviceHandle )
{
    NvOdmSocPowerState state = NvRmPowerLowestStateGet();

    if (state ==  NvOdmSocPowerState_Suspend)
        NvRmPrivPowerGroupSuspend(hRmDeviceHandle);

#if NVRM_POWER_DEBUG_SUSPEND_ENTRY
    NvOsMutexLock(s_hPowerClientMutex);
    {
        NvU32 i;
        ModuleVoltageReq* pVoltageReq = NULL;
        NvRmPowerClient* pPowerClient = NULL;
        NvRmPowerRegistry* pRegistry = &s_PowerRegistry;
        NvRmPowerState s = NvRmPrivPowerGetState(hRmDeviceHandle);

        // Report combined RM power stste and active modules
        NvOsDebugPrintf("RM power state before suspend: %s (%d)\n",
           ((s == NvRmPowerState_Active) ? "Active" :
            ((s == NvRmPowerState_AutoHw) ? "AutoHw" : "Idle")), s);
        if (s == NvRmPowerState_Active)
        {
            for (i = 0; i < pRegistry->UsedIndexRange; i++)
            {
                pPowerClient = pRegistry->pPowerClients[i];
                if (pPowerClient)
                {
                    pVoltageReq = pPowerClient->pVoltageReqHead;
                    while (pVoltageReq != NULL)
                    {
                        if (pVoltageReq->MaxVolts != NvRmVoltsOff)
                        {
                            // could also set some bad e = NvError_Bad???
                            NvOsDebugPrintf("Active Module: 0x%x\n",
                                                pVoltageReq->ModuleId);
                        }
                        pVoltageReq = pVoltageReq->pNext;
                    }
                }
            }
        }
    }
    NvOsMutexUnlock(s_hPowerClientMutex);
#endif

    return NvSuccess;
}
Ejemplo n.º 9
0
NvError
NvRmAnalogInterfaceControl(
    NvRmDeviceHandle hDevice,
    NvRmAnalogInterface Interface,
    NvBool Enable,
    void *Config,
    NvU32 ConfigLength )
{
    NvError err = NvSuccess;
    NvU32 id;
    NvU32 inst;

    NV_ASSERT( hDevice );

    id = NVRM_ANALOG_INTERFACE_ID( Interface );
    inst = NVRM_ANALOG_INTERFACE_INSTANCE( Interface );

    NvOsMutexLock( hDevice->mutex );

    switch( id ) {
    case NvRmAnalogInterface_Dsi:
        break;
    case NvRmAnalogInterface_ExternalMemory:
        break;
    case NvRmAnalogInterface_Hdmi:
        break;
    case NvRmAnalogInterface_Lcd:
        break;
    case NvRmAnalogInterface_Uart:
        break;
    case NvRmAnalogInterface_Sdio:
        break;
    case NvRmAnalogInterface_Tv:
        err = NvRmPrivTvDcControl( hDevice, Enable, inst, Config,
            ConfigLength );
        break;
    case NvRmAnalogInterface_VideoInput:
        err = NvRmPrivVideoInputControl( hDevice, Enable, inst, Config,
            ConfigLength);
        break;
    default:
        NV_ASSERT(!"Unknown Analog interface passed. ");
    }

    NvOsMutexUnlock( hDevice->mutex );

    return err;
}
Ejemplo n.º 10
0
NvBool
NvRmPmuWriteAlarm(
    NvRmDeviceHandle  hRmDevice,
    NvU32 Count)
{
    NvBool ReturnStatus = NV_FALSE;

    if (!s_PmuSupportedEnv)
        return NV_FALSE;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    ReturnStatus = NvOdmPmuWriteAlarm(s_Pmu.hOdmPmu, Count);
    NvOsMutexUnlock(s_Pmu.hMutex);
    return ReturnStatus;
}
Ejemplo n.º 11
0
NvBool NvRmPmuGetAcLineStatus( 
    NvRmDeviceHandle hRmDevice,
    NvRmPmuAcLineStatus * pStatus )
{
    NvBool ReturnStatus = NV_FALSE;

    if (!s_PmuSupportedEnv)
        return NV_FALSE;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    ReturnStatus =
        NvOdmPmuGetAcLineStatus(s_Pmu.hOdmPmu, (NvOdmPmuAcLineStatus*)pStatus);
    NvOsMutexUnlock(s_Pmu.hMutex);
    return ReturnStatus;
}
Ejemplo n.º 12
0
 NvBool NvRmPmuGetBatteryStatus( 
    NvRmDeviceHandle hRmDevice,
    NvRmPmuBatteryInstance batteryInst,
    NvU8 * pStatus )
{
    NvBool ReturnStatus = NV_FALSE;

    if (!s_PmuSupportedEnv)
        return NV_FALSE;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    ReturnStatus = NvOdmPmuGetBatteryStatus(
        s_Pmu.hOdmPmu, (NvOdmPmuBatteryInstance)batteryInst, pStatus);
    NvOsMutexUnlock(s_Pmu.hMutex);
    return ReturnStatus;
}
Ejemplo n.º 13
0
/* get global variable gUsbCurrLimitC value and set it into /proc/usbCurrLimitInfo for user space read */
static int tegra_usbCurrLimit_read_proc(char *page, char **start, off_t off,
       int count, int *eof, void *data)
{
       int len = 0;

	/*
       NV_DRIVER_TRACE (("tegra_usbCurrLimit_read_proc:start\n"));	
	*/
       NvOsMutexLock(usbCurrLimit_lock);
       len += snprintf(page+len, count-len,"%d", gUsbCurrLimitC);
       NvOsMutexUnlock(usbCurrLimit_lock);

       *eof = 1;
    /*   
       NV_DRIVER_TRACE (("tegra_usbCurrLimit_read_proc:end\n"));
    */ 
       return len;
}
Ejemplo n.º 14
0
void NvRmPmuGetVoltage(
    NvRmDeviceHandle hDevice,
    NvU32 vddId,
    NvU32 * pMilliVolts)
{
    NvU32 i;
    if (!s_PmuSupportedEnv)
        return;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    for (i = 0; i < VOLTAGE_CONTROL_RETRY_CNT; i++)
    {
        if (NvOdmPmuGetVoltage(s_Pmu.hOdmPmu, vddId, pMilliVolts))
            break;
    }
    NV_ASSERT(i < VOLTAGE_CONTROL_RETRY_CNT);
    NvOsMutexUnlock(s_Pmu.hMutex);
}
Ejemplo n.º 15
0
void NvRmPwmClose(NvRmPwmHandle hPwm)
{ 
    NvU32 i;
    if (!hPwm)
        return;

    NV_ASSERT(hPwm->RefCount);    

    NvOsMutexLock(s_hPwmMutex);
    hPwm->RefCount--;
    if (hPwm->RefCount == 0)
    {
        // Unmap the pwm register virtual address space
        for (i = 0; i < NvRmPwmOutputId_Num-2; i++)
        {
            NvRmPhysicalMemUnmap((void*)s_hPwm->VirtualAddress[i],
                             s_hPwm->PwmBankSize);
        }
        
        // Unmap the pmc register virtual address space
        NvRmPhysicalMemUnmap(
                (void*)s_hPwm->VirtualAddress[NvRmPwmOutputId_Num-2],
                s_hPwm->PmcBankSize);

        if (s_IsPwmFirstConfig)
        {
            // Disable power
            PwmPowerConfigure(hPwm, NV_FALSE);

            // Unregister with RM power
            NvRmPowerUnRegister(hPwm->RmDeviceHandle, s_PwmPowerID);

            // Tri-state the pin-mux pins
            NV_ASSERT_SUCCESS(NvRmSetModuleTristate(hPwm->RmDeviceHandle,
                NVRM_MODULE_ID(NvRmModuleID_Pwm, 0), NV_TRUE));
            s_IsPwmFirstConfig = NV_FALSE;
        }
        NvOsFree(s_hPwm);
        s_hPwm = NULL;
    }
    NvOsMutexUnlock(s_hPwmMutex);
}
Ejemplo n.º 16
0
static void
NvEcPrivProcessPostSendRequest( NvEcPrivState *ec,
                                NvError transportStatus )
{
    NvEcRequestNode     *requestNode = NULL;
    NvEcResponseNode    *responseNode;

    NvEcPrivFindAndDequeueRequest(ec, &requestNode, transportStatus, NV_TRUE);

    // update corresponding responseNode timeout
    if ( requestNode )
    {
        requestNode->completed = NV_TRUE;
        responseNode = requestNode->responseNode;
        if ( responseNode )
        {
            NvOsMutexLock( ec->responseMutex );
            NV_ASSERT(ec->responseBegin);
            if ( NV_WAIT_INFINITE == ec->timeout[NVEC_IDX_RESPONSE] )
            {
                // no current pending response on timeout watch.
                // Update response queue timeout.
                responseNode->timeout = NVEC_RESPONSE_TIMEOUT_DEFAULT;
                ec->timeout[NVEC_IDX_RESPONSE] = responseNode->timeout;
                ec->timeoutBase[NVEC_IDX_RESPONSE] = ec->lastTime;
                DISP_MESSAGE(("\r\nec->timeout[NVEC_IDX_RESPONSE] is set to=%d", 
                    ec->timeout[NVEC_IDX_RESPONSE]));
            }
            else
            {
                // Update this response timeout with current lastTime as base
                responseNode->timeout = NVEC_RESPONSE_TIMEOUT_DEFAULT +
                                        NVEC_TIME_BASE(ec, NVEC_IDX_RESPONSE);
                                    // wraparound time difference will work too.
            }
            NvOsMutexUnlock( ec->responseMutex );
        }
        NvOsSemaphoreSignal( requestNode->sema );
            // all request stuff should be done before signal
    }
}
Ejemplo n.º 17
0
static int tegra_usbCurrLimit_write_proc (struct file *file, const char *buffer, unsigned long count,
                   void *data)
{
	int len = 0;
	static char proc_buf[4];
	if ( copy_from_user(proc_buf, buffer, count) ) {
	        return -EFAULT;
	}
	if ( strncmp( proc_buf, "1", 1) == 0 )
	{
		gUsbCurrLimitC = 1;
		NvOsMutexLock(usbCurrLimit_lock);
		len += snprintf(proc_buf, count-len, "%d",gUsbCurrLimitC);
		NvOsMutexUnlock(usbCurrLimit_lock);
		return len;
	}
	else
	{
		NvOsDebugNprintf("tegra_usbCurrLimit_write_proc fail\n");
		return -1;
	}
}       
Ejemplo n.º 18
0
void NvRmPmuSetChargingCurrentLimit(
    NvRmDeviceHandle hRmDevice,
    NvRmPmuChargingPath ChargingPath,
    NvU32 ChargingCurrentLimitMa,
    NvU32 ChargerType)
{
    NvU32 i;

    if (!s_PmuSupportedEnv)
        return;

    NV_ASSERT(s_Pmu.hMutex);
    NvOsMutexLock(s_Pmu.hMutex);
    for (i = 0; i < VOLTAGE_CONTROL_RETRY_CNT; i++)
    {
        if (NvOdmPmuSetChargingCurrent(
            s_Pmu.hOdmPmu, (NvOdmPmuChargingPath)ChargingPath, 
            ChargingCurrentLimitMa, ChargerType))
            break;
    }
    NV_ASSERT(i < VOLTAGE_CONTROL_RETRY_CNT);
    NvOsMutexUnlock(s_Pmu.hMutex);
}
Ejemplo n.º 19
0
NvError NvEcPowerResume(void)
{
    NvError e = NvSuccess;
    NvEcPrivState   *ec = &g_ec;
    
    NvOsMutexLock(ec->mutex);

    // Call transport's power on if it's OFF state
    if (ec->powerState == NV_FALSE)
    {
        NV_CHECK_ERROR_CLEANUP( NvEcTransportPowerResume(ec->transport) );

        ec->powerState = NV_TRUE;
        ec->EnterLowPowerState = NV_FALSE;
        // Signal priv thread to get out of power suspend.
        NvOsSemaphoreSignal(ec->LowPowerExitSema);
        // Perform post-resume EC operations
        NvEcPrivPowerResumeHook(ec->hEc);
    }

fail:
    NvOsMutexUnlock(ec->mutex);
    return e;
}
Ejemplo n.º 20
0
NvU32 NvRmGetKeyValue(NvRmDeviceHandle hRm, NvU32 KeyID)
{
    Key *pList = s_pKeyList;
    NvU32 Value = 0;
    unsigned int i;

    NvOsMutexLock(s_Mutex);
    while (pList)
    {
        for (i=0; i<pList->Count; i++)
        {
            if (pList->KeyID[i] == KeyID)
            {
                Value = pList->Value[i];
                goto cleanup;
            }
        }
        pList = pList->pNextKey;
    }
cleanup:
    NvOsMutexUnlock(s_Mutex);
    // Returning value as 0 since key is not present
    return Value;
}
Ejemplo n.º 21
0
NvError
NvRmPowerRegister(
    NvRmDeviceHandle hRmDeviceHandle,
    NvOsSemaphoreHandle hEventSemaphore,
    NvU32* pClientId)
{
    NvU32 FreeIndex;
    NvError error;
    NvOsSemaphoreHandle hSema = NULL;
    NvRmPowerClient* pNewClient = NULL;
    NvRmPowerRegistry* pRegistry = &s_PowerRegistry;

    NV_ASSERT(hRmDeviceHandle);
    NV_ASSERT(pClientId);

    // If non-zero semaphore handle is passed, duplicate it to be avialable
    // after the call. Abort registration if non-zero handle is invalid
    if (hEventSemaphore != NULL)
    {
        error = NvOsSemaphoreClone(hEventSemaphore, &hSema);
        if (error != NvSuccess)
        {
            NV_ASSERT(!" Power Register Semaphore Clone error. ");
        }
    }

    NvOsMutexLock(s_hPowerClientMutex);

    // Find free registry entry for the new client
    for (FreeIndex = 0; FreeIndex < pRegistry->UsedIndexRange; FreeIndex++)
    {
        if (pRegistry->pPowerClients[FreeIndex] == NULL)
            break;
    }
    if (FreeIndex == pRegistry->AvailableEntries)
    {
        // If all avilable entries are used, re-size registry array
        NvU32 entries = pRegistry->AvailableEntries +
            NVRM_POWER_REGISTRY_DELTA;
        size_t s = sizeof(*pRegistry->pPowerClients) * (size_t)entries;
        NvRmPowerClient** p = NvOsRealloc(pRegistry->pPowerClients, s);
        if (p == NULL)
        {
            NvU32 old_size;

            /* fall back to NvOsAlloc */
            p = NvOsAlloc( s );
            if( p == NULL )
            {
                goto failed;
            }

            /* copy the old data, free, etc, */
            old_size = sizeof(*pRegistry->pPowerClients) *
                pRegistry->AvailableEntries;

            NvOsMemcpy( p, pRegistry->pPowerClients, old_size );
            NvOsFree( pRegistry->pPowerClients );
        }
        pRegistry->pPowerClients = p;
        pRegistry->AvailableEntries = entries;
    }
    if (FreeIndex == pRegistry->UsedIndexRange)
    {
        // If reached used index range boundary, advance it
        pRegistry->UsedIndexRange++;
    }

    // Allocate and store new client record pointer in registry (null-pointer
    // marks registry entry as free, so it's OK to store it before error check)
    pNewClient = NvOsAlloc(sizeof(*pNewClient));
    pRegistry->pPowerClients[FreeIndex] = pNewClient;
    if (pNewClient == NULL)
    {
        goto failed;
    }

    // Fill in new client entry
    pNewClient->hEventSemaphore = hSema;
    pNewClient->Event = NvRmPowerEvent_NoEvent;
    pNewClient->pVoltageReqHead = NULL;
    pNewClient->pClockReqHead = NULL;
    pNewClient->pStarvationHints = NULL;
    pNewClient->tag = *pClientId;

    /*
     * Combine index with client pointer into registration ID returned to the
     * client. This will make it a little bit more difficult for not-registered
     * clients to guess/re-use IDs
     */
    pNewClient->id = NVRM_POWER_INDEX2ID(FreeIndex, (NvU32)pClientId);
    *pClientId = pNewClient->id;

    NvOsMutexUnlock(s_hPowerClientMutex);
    return NvSuccess;

failed:
    NvOsFree(pNewClient);
    NvOsSemaphoreDestroy(hSema);
    NvOsMutexUnlock(s_hPowerClientMutex);
    return NvError_InsufficientMemory;
}
Ejemplo n.º 22
0
/*
 * Process receive (response & event) and update individual timeout.
 *
 * Return NvError_InsufficientMemory due to 2 conditions:
 * - internal event queue (ec->eventNodes) too small.
 * - client did NvEcRegisterForEvents.
 * Skip TransportGetReceivePacket and transport will keep NACK'ing EC in this
 * error case.
 */
static NvError
NvEcPrivProcessReceiveEvent( NvEcPrivState *ec,
                             NvError       transportStatus )
{
    NvError                 e = NvSuccess;
    NvEcEventNode           *eventNode = NULL;
    NvEcEventRegistration   *reg = NULL;
    NvEcEvent               *packet = NULL;
    NvEcEventType           eventType;
    NvU32                   i, tagBitmap;

    NvOsMutexLock( ec->eventMutex );
    if ( ec->eventFreeBegin )
    {
        eventNode = ec->eventFreeBegin;
        packet = &eventNode->event;
    }
    else
    {
        e = NvError_InsufficientMemory;
        goto fail;
    }
    NV_CHECK_ERROR( NvEcTransportGetReceivePacket( ec->transport,
                    (NvEcResponse *)packet, sizeof(NvEcEvent) ) );
                    // nothing we can do here if error!

    eventType = packet->EventType;
    NV_ASSERT( eventType < NvEcEventType_Num );

    e = NvError_InvalidState;  // init to event type never registered
    i = 0;
    tagBitmap = ec->eventTagBitmap[eventType];
    while( tagBitmap )
    {
        NV_ASSERT( i < NvEcEventType_Num );
        if ( tagBitmap & 1 )
        {
            reg = ec->eventMap[i][eventType];
            NV_ASSERT( reg );

            if ( NvSuccess != e )
            {
                // dequeue from free and enqueue into ready if not done yet
                ec->eventFreeBegin = eventNode->next;
                if ( ec->eventFreeBegin == NULL )
                    ec->eventFreeEnd = NULL;
                eventNode->timeout = NVEC_EVENT_TIMEOUT_DEFAULT;    // ???
                eventNode->tagBitmap = ec->eventTagBitmap[eventType];
                eventNode->next = NULL;
                NVEC_ENQ( ec->eventReady, eventNode );
                e = NvSuccess;
            }
            NvOsSemaphoreSignal( reg->sema );
        }
        i++;
        tagBitmap = tagBitmap >> 1;
    }

fail:
    NvOsMutexUnlock( ec->eventMutex );
    return e;
}
Ejemplo n.º 23
0
/*
 * Traverse response nodes with these:
 *  - one response matching the tag param (returns the node).  If bypassing
 *    tag checking, use INVALID tag as parameter.
 *  - all responses timeout (will signal back too)
 *  - Update individual responseNode's timeout by rebasing to
 *    EcPrivThread-global time (hEc->lastTime).
 *  - Update shortest timeout value for response queue.
 */
static void
NvEcPrivFindAndDequeueResponse( NvEcPrivState    *ec,
                                NvEcResponse     *response,
                                NvEcResponseNode **pResponseNode )
{
    NvEcResponseNode    *t = NULL, *p = NULL, *temp;
    NvU32               timeout = NV_WAIT_INFINITE;
    NvBool              remove = NV_FALSE, found = NV_FALSE;
    NvBool              SignalSema;
    
    NvOsMutexLock( ec->responseMutex );
    NV_ASSERT(ec->responseBegin);
    DISP_MESSAGE(("\r\nFindDQRes responseBegin=0x%x", ec->responseBegin));
    if ( ec->responseBegin )
    {
        t = ec->responseBegin;
        while( t )
        {
            SignalSema = NV_FALSE;
            /* FIXME: just match tag?  more to match?
             * There may be the cases where spurious response is received from EC.
             * Response should not be removed from the queue until req is complete.
             */
            DISP_MESSAGE(("t->tag=0x%x\n", t->tag));

            if (response)
                DISP_MESSAGE(("response->RequestorTag=0x%x\n", response->RequestorTag));

            if ( response && !found && (t->tag == response->RequestorTag) && 
                 t->requestNode->completed )
            {
                if ( pResponseNode )
                    *pResponseNode = t;
                found = NV_TRUE;
                remove = NV_TRUE;
            }
            else
            {
#if ENABLE_TIMEOUT
                if ( t->timeout <=
                            NVEC_TIMEDIFF_WITH_BASE(ec, NVEC_IDX_RESPONSE) )
                {
                    t->status = NvError_Timeout;
                    SignalSema = NV_TRUE;
                    remove = NV_TRUE;
                    DISP_MESSAGE(("Resp Timeout Respnode=0x%x", t));
                }
                else
                {
                    // This check is needed for spurious response case handling.
                    if (t->timeout != NV_WAIT_INFINITE)
                        t->timeout -=
                                NVEC_TIMEDIFF_WITH_BASE(ec, NVEC_IDX_RESPONSE);
                            // update this response timeout w/ lastTime as base
                }
#endif
            }
            
            if ( remove )
            {
                temp = t;
                NVEC_UNLINK( ec->response, t, p );
                DISP_MESSAGE(("\r\nFindDQRes removed=0x%x, removed->next=0x%x, "
                    "prev=0x%x  ec->responseBegin=0x%x", t, t->next, p, 
                    ec->responseBegin));
                remove = NV_FALSE;
                if (p)
                    t = p->next;
                else
                    t = ec->responseBegin;
                if (SignalSema == NV_TRUE)
                    NvOsSemaphoreSignal( temp->sema );
            }
            else
            {
                if ( timeout > t->timeout )
                    timeout = t->timeout;
                p = t;
                t = t->next;
            }
        }
        
        // update with per-queue timeout and timeoutBase
        ec->timeout[NVEC_IDX_RESPONSE] = timeout;
        ec->timeoutBase[NVEC_IDX_RESPONSE] = ec->lastTime;
        DISP_MESSAGE(("\r\nec->timeout[NVEC_IDX_RESPONSE] is set to=%d",
            ec->timeout[NVEC_IDX_RESPONSE]));
    }

    if (found == NV_FALSE)
        NvOsDebugPrintf("\r\n***NVEC:Received Spurious Response from EC.");
    NvOsMutexUnlock( ec->responseMutex );
}
Ejemplo n.º 24
0
void
NvEcClose(NvEcHandle hEc)
{
    NvEcPrivState   *ec;
    NvBool          destroy = NV_FALSE;

    if ( NULL == hEc )
        return;

    NV_ASSERT( s_refcount );

    ec = hEc->ec;
    NvOsMutexLock( ec->mutex );

    // FIXME: handle client still with outstanding event types
    if ( !--s_refcount )
    {
        NvEcPrivDeinitHook(ec->hEc);

        NV_ASSERT( NULL == ec->eventReg[hEc->tag].regBegin &&
                    NULL == ec->eventReg[hEc->tag].regEnd );
        NV_ASSERT( NULL == ec->requestBegin && NULL == ec->requestEnd );
        NV_ASSERT( NULL == ec->responseBegin && NULL == ec->responseEnd );

        ec->exitPingThread = NV_TRUE;
        NvOsSemaphoreSignal( ec->hPingSema );
        NvOsThreadJoin( ec->hPingThread );
        ec->exitThread = NV_TRUE;
        NvOsSemaphoreSignal( ec->sema );
        NvOsThreadJoin( ec->thread );

        NvEcTransportClose( ec->transport );
        NvOsMutexDestroy( ec->requestMutex );
        NvOsMutexDestroy( ec->responseMutex );
        NvOsMutexDestroy( ec->eventMutex );
        NvOsSemaphoreDestroy( ec->sema );
        NvOsSemaphoreDestroy( ec->hPingSema );
        NvOsSemaphoreDestroy( ec->LowPowerEntrySema );
        NvOsSemaphoreDestroy( ec->LowPowerExitSema );
        destroy = NV_TRUE;

        NvOsFree( ec->eventNodes );
        NvOsFree( ec->hEc );
    }

    // Set this flag as FALSE to indicate power is disabled
    ec->powerState = NV_FALSE;

    NV_ASSERT( hEc->tag < NVEC_MAX_REQUESTOR_TAG );
    ec->tagAllocated[hEc->tag] = NV_FALSE;      // to be recycled

    NvOsFree( hEc );
    NvOsMutexUnlock( ec->mutex );

    if ( destroy )
    {
        NvOsMutexDestroy( ec->mutex );
        NvOsMemset( ec, 0, sizeof(NvEcPrivState) );
        ec->mutex = NULL;
    }
}
Ejemplo n.º 25
0
NvError
NvEcOpen(NvEcHandle *phEc,
         NvU32 InstanceId)
{
    NvEc            *hEc = NULL;
    NvU32           i;
    NvEcPrivState   *ec = &g_ec;
    NvOsMutexHandle mutex = NULL;
    NvError         e = NvSuccess;

    NV_ASSERT( phEc );

    if ( NULL == ec->mutex )
    {
        e = NvOsMutexCreate(&mutex);
        if (NvSuccess != e)
            return e;
        if (0 != NvOsAtomicCompareExchange32((NvS32*)&ec->mutex, 0,
                                                        (NvS32)mutex) )
            NvOsMutexDestroy( mutex );
    }

    NvOsMutexLock(ec->mutex);

    if ( !s_refcount )
    {
        mutex = ec->mutex;
        NvOsMemset( ec, 0, sizeof(NvEcPrivState) );
        ec->mutex = mutex;
        
        NV_CHECK_ERROR_CLEANUP( NvOsMutexCreate( &ec->requestMutex ));
        NV_CHECK_ERROR_CLEANUP( NvOsMutexCreate( &ec->responseMutex ));
        NV_CHECK_ERROR_CLEANUP( NvOsMutexCreate( &ec->eventMutex ));
        
        NV_CHECK_ERROR_CLEANUP( NvOsSemaphoreCreate( &ec->sema, 0));
        NV_CHECK_ERROR_CLEANUP( NvOsSemaphoreCreate( &ec->LowPowerEntrySema, 0));
        NV_CHECK_ERROR_CLEANUP( NvOsSemaphoreCreate( &ec->LowPowerExitSema, 0));
        
        NV_CHECK_ERROR_CLEANUP( NvEcTransportOpen( &ec->transport, InstanceId,
            ec->sema, 0 ) );
    }

    // Set this flag as TRUE to indicate power is enabled
    ec->powerState = NV_TRUE;

    // create private handle for internal communications between NvEc driver
    // and EC
    if ( !s_refcount )
    {
        ec->hEc = NvOsAlloc( sizeof(NvEc) );
        if ( NULL == ec->hEc )
            goto clean;
        
        // reserve the zero tag for internal use by the nvec driver; this ensures
        // that the driver always has a requestor tag available and can therefore
        // always talk to the EC
        ec->tagAllocated[0] = NV_TRUE;
        ec->hEc->ec = ec;
        ec->hEc->tag = 0;

        NV_CHECK_ERROR_CLEANUP(NvOsSemaphoreCreate(&ec->hPingSema, 0));

        // perform startup operations before mutex is unlocked
        NV_CHECK_ERROR_CLEANUP( NvEcPrivInitHook(ec->hEc) );

        // start thread to send "pings" - no-op commands to keep EC "alive"
        NV_CHECK_ERROR_CLEANUP(NvOsThreadCreate(
            (NvOsThreadFunction)NvEcPrivPingThread, ec, &ec->hPingThread));
    }

    hEc = NvOsAlloc( sizeof(NvEc) );
    if ( NULL == hEc )
        goto clean;

    NvOsMemset(hEc, 0x00, sizeof(NvEc));

    hEc->ec = ec;

    hEc->tag = NVEC_REQUESTOR_TAG_INVALID;
    for ( i = 0; i < NVEC_MAX_REQUESTOR_TAG; i++ )
    {
        if ( !ec->tagAllocated[i] )
        {
            ec->tagAllocated[i] = NV_TRUE;
            hEc->tag = i;
            break;
        }
    }
    if ( NVEC_REQUESTOR_TAG_INVALID == hEc->tag )
        goto clean;      // run out of tag, clean it up!

    *phEc = hEc;
    s_refcount++;

    NvOsMutexUnlock( ec->mutex );

    ec->IsEcActive = NV_FALSE;

    return NvSuccess;

clean:
    NvOsFree( hEc );
    NvOsMutexUnlock( ec->mutex );

    return NvError_InsufficientMemory;

fail:
    if (!s_refcount)
    {
        ec->exitPingThread = NV_TRUE;
        if (ec->hPingSema)
            NvOsSemaphoreSignal( ec->hPingSema );
        NvOsThreadJoin( ec->hPingThread );
        NvOsSemaphoreDestroy(ec->hPingSema);
        ec->exitThread = NV_TRUE;
        if (ec->sema)
            NvOsSemaphoreSignal( ec->sema );
        NvOsThreadJoin( ec->thread );
        NvOsFree( ec->hEc );
        if ( ec->transport )
            NvEcTransportClose( ec->transport );
        NvOsMutexDestroy( ec->requestMutex );
        NvOsMutexDestroy( ec->responseMutex );
        NvOsMutexDestroy( ec->eventMutex );
        NvOsSemaphoreDestroy( ec->sema );
        NvOsSemaphoreDestroy( ec->LowPowerEntrySema );
        NvOsSemaphoreDestroy( ec->LowPowerExitSema );
        if ( ec->mutex )
        {
            NvOsMutexUnlock( ec->mutex );
            // Destroying of this mutex here is not safe, if another thread is
            // waiting on this mutex, it can cause issues.  We shold have
            // serialized Init/DeInit calls for creating and destroying this mutex.
            NvOsMutexDestroy( ec->mutex );
            NvOsMemset( ec, 0, sizeof(NvEcPrivState) );
            ec->mutex = NULL;
        }
    }
    return NvError_NotInitialized;
}
Ejemplo n.º 26
0
NvError
NvEcUnregisterForEvents(
    NvEcEventRegistrationHandle hEcEventRegistration)
{
    NvEcPrivState   *ec;
    NvU32           tag;
    NvU32           tagMask;
    NvError         e = NvSuccess;
    NvEcEventRegistration *p = NULL, *reg = NULL;
    NvEcEventNode   *eventNode, *t;
    NvU32           i;

    if( NULL == hEcEventRegistration )
        return NvError_BadParameter;
    
    ec = hEcEventRegistration->hEc->ec;
    tag = hEcEventRegistration->hEc->tag;
    tagMask = (1UL << tag);

    NvOsMutexLock( ec->eventMutex );
    
    NVEC_REMOVE_FROM_Q( ec->eventReg[tag].reg, hEcEventRegistration, reg, p );
    if ( !reg )
    {
        e = NvError_BadParameter;      // can't find the handle
        goto fail;
    }

    eventNode = ec->eventReadyBegin;
    while ( eventNode )
    {
        // pre advance eventNode since current one could be removed
        t = eventNode;
        eventNode = eventNode->next;
        if ( (reg->eventBitmap & (1UL << t->event.EventType)) &&
                (t->tagBitmap & tagMask) )
        {
            t->tagBitmap &= ~tagMask;
            if ( !t->tagBitmap )
            {
                NvEcPrivRemoveEventFromReady( ec, t );
            }
        }
    }
 
    // remove global references to this registration
    i = 0;
    while( reg->eventBitmap )
    {
        NV_ASSERT(i < NvEcEventType_Num);
        if ( reg->eventBitmap & 1 )
        {
            ec->eventTagBitmap[i] &= ~tagMask;
            ec->eventMap[tag][i] = NULL;
        }
        reg->eventBitmap = reg->eventBitmap >> 1;
        i++;
    }

    NvOsSemaphoreDestroy( reg->sema );
    NvOsFree( hEcEventRegistration );
fail:
    NvOsMutexUnlock( ec->eventMutex );

    return e;
}
Ejemplo n.º 27
0
NvError
NvEcRegisterForEvents(
    NvEcHandle hEc,
    NvEcEventRegistrationHandle *phEcEventRegistration,
    NvOsSemaphoreHandle hSema,
    NvU32 NumEventTypes,
    NvEcEventType *pEventTypes,
    NvU32 NumEventPackets,
    NvU32 EventPacketSize)
{
    NvEcPrivState   *ec = hEc->ec;
    NvEcEventRegistration *h = NULL;
    NvOsSemaphoreHandle hSemaClone = NULL;
    NvError e = NvSuccess;
    NvU32   val, i, tag = hEc->tag;
    NvU32   tagMask = (1UL << tag);

    if ( !hSema || !pEventTypes )
        return NvError_BadParameter;

    if ( !NumEventTypes || (NumEventTypes > NvEcEventType_Num) )
        return NvError_InvalidSize;     // FIXME: is this sufficient?

    NV_ASSERT( phEcEventRegistration );

    NvOsMutexLock( ec->mutex );
    if ( !ec->thread )
        NvEcPrivThreadCreate( ec );

    // Allocate common pool of internal event nodes bufferring if not already
    if ( !ec->eventNodes )
    {
        val = NVEC_NUM_EVENT_PACKETS_DEFAULT;
        if ( NumEventPackets > val )
            val = NumEventPackets;
        ec->eventNodes = NvOsAlloc(val * sizeof(NvEcEventNode));
        if ( NULL == ec->eventNodes )
        {
            NvOsMutexUnlock( ec->mutex );
            return NvError_InsufficientMemory;
        }
        NvOsMemset( ec->eventNodes, 0, (val * sizeof(NvEcEventNode)) );
        for( i = 0; i < val - 1; i++ )
            ec->eventNodes[i].next = &ec->eventNodes[i+1];
        ec->eventFreeBegin = ec->eventNodes;
        ec->eventFreeEnd = ec->eventNodes + val - 1;
    }
    NvOsMutexUnlock( ec->mutex );

    NV_CHECK_ERROR( NvOsSemaphoreClone( hSema, &hSemaClone ) );

    NvOsMutexLock( ec->eventMutex );
    // Quick pre-check for for AlreadyAllocated case
    for ( i = 0; i < NumEventTypes; i++ )
    {
        val = pEventTypes[i];
        if ( val >= NvEcEventType_Num )
            e = NvError_BadParameter;
        else if ( ec->eventMap[tag][val] )
            e = NvError_AlreadyAllocated;
        if ( NvSuccess != e )
            goto fail;
    }
    h = NvOsAlloc( sizeof(NvEcEventRegistration));
    if ( NULL == h )
    {
        e = NvError_InsufficientMemory;
        goto fail;
    }

    NvOsMemset( h, 0, sizeof(NvEcEventRegistration) );
    NVEC_ENQ( ec->eventReg[tag].reg, h );

    // Fill up new registration handle
    NV_ASSERT( NvEcEventType_Num <= 32 );   // eventBitmap only works if <= 32
    for ( i = 0; i < NumEventTypes; i++ )
    {
        val = pEventTypes[i];
        h->eventBitmap |= (1 << val);
        ec->eventMap[tag][val] = h;
        ec->eventTagBitmap[val] |= tagMask;
    }
    h->numEventTypes = NumEventTypes;
    h->sema = hSemaClone;
    h->hEc = hEc;

    h->numEventPacketsHint = NumEventPackets;
    h->eventPacketSizeHint = EventPacketSize;       // ignored hints for now

    NvOsMutexUnlock( ec->eventMutex );
    *phEcEventRegistration = h;
    return e;

fail:
    NvOsSemaphoreDestroy( hSemaClone );
    NvOsMutexUnlock( ec->eventMutex );
    NvOsFree( h );
    return e;
}
Ejemplo n.º 28
0
NvError
NvEcSendRequest(
    NvEcHandle hEc,
    NvEcRequest *pRequest,
    NvEcResponse *pResponse,
    NvU32 RequestSize,
    NvU32 ResponseSize)
{
    NvEcPrivState       *ec;
    NvError             e = NvSuccess;
    NvEcRequestNode     *requestNode = NULL;
    NvEcResponseNode    *responseNode = NULL;
    NvOsSemaphoreHandle requestSema = NULL;
    NvOsSemaphoreHandle responseSema = NULL;
    
    NV_ASSERT( pRequest );
    NV_ASSERT( hEc );
    if ( (RequestSize > sizeof(NvEcRequest)) || 
         (ResponseSize > sizeof(NvEcResponse)) )
        return NvError_InvalidSize;
    
    ec = hEc->ec;
    requestNode = NvOsAlloc(sizeof(NvEcRequestNode));
    if ( NULL == requestNode )
    {
        e = NvError_InsufficientMemory;
        goto fail;
    }
    NV_CHECK_ERROR_CLEANUP( NvOsSemaphoreCreate( &requestSema, 0 ) );
    
    if ( pResponse )
    {
        responseNode = NvOsAlloc(sizeof(NvEcResponseNode));
        if ( NULL == responseNode )
        {
            e = NvError_InsufficientMemory;
            goto fail;
        }
        NV_CHECK_ERROR_CLEANUP( NvOsSemaphoreCreate( &responseSema, 0 ) );
    }

    ec->IsEcActive = NV_TRUE;

    // request end-queue.  Timeout set to infinite until request sent.
    NvOsMemset( requestNode, 0, sizeof(NvEcRequestNode) );
    pRequest->RequestorTag = hEc->tag;      // assigned tag here
    DISP_MESSAGE(("NvEcSendRequest:pRequest->RequestorTag=0x%x\n", pRequest->RequestorTag));
    NvOsMemcpy(&requestNode->request, pRequest, RequestSize);
    requestNode->tag = hEc->tag;
    DISP_MESSAGE(("NvEcSendRequest:requestNode->tag=0x%x\n", requestNode->tag));
    requestNode->sema = requestSema;
    requestNode->timeout = NV_WAIT_INFINITE;
    requestNode->completed = NV_FALSE;
    requestNode->size = RequestSize;
    
    NvOsMutexLock( ec->requestMutex );
    NVEC_ENQ( ec->request, requestNode );
    DISP_MESSAGE(("\r\nSendReq ec->requestBegin=0x%x", ec->requestBegin));
    NvOsMutexUnlock( ec->requestMutex );
    
    // response en-queue.  Timeout set to infinite until request completes.
    if ( pResponse )
    {
        NvOsMemset( responseNode, 0, sizeof(NvEcResponseNode) );
        requestNode->responseNode = responseNode;   // association between
        responseNode->requestNode = requestNode;    //   request & response
        responseNode->sema = responseSema;
        responseNode->timeout = NV_WAIT_INFINITE;
        responseNode->tag = hEc->tag;
        DISP_MESSAGE(("NvEcSendRequest:responseNode->tag=0x%x\n", responseNode->tag));
        responseNode->size = ResponseSize;
        NvOsMutexLock( ec->responseMutex );
        NVEC_ENQ( ec->response, responseNode );
        DISP_MESSAGE(("\r\nSendReq ec->responseBegin=0x%x", ec->responseBegin));
        NvOsMutexUnlock( ec->responseMutex );
    }

    NvOsMutexLock( ec->mutex );
    if ( !ec->thread )
        NvEcPrivThreadCreate( ec );
    NvOsMutexUnlock( ec->mutex );

    // Trigger EcPrivThread
    NvOsSemaphoreSignal( ec->sema );
    DISP_MESSAGE(("\r\nSendReq requestNode=0x%x, requestNode->responseNode=0x%x",
        requestNode, requestNode->responseNode));
    // Wait on Request returns
    NvOsSemaphoreWait( requestSema );
    DISP_MESSAGE(("\r\nSendReq Out of req sema"));

    e = requestNode->status;
    if ( NvSuccess != e )
    {
        NvEcResponseNode    *t = NULL, *p = NULL;

        // de-queue responseNode too !!!!
        NvOsMutexLock( ec->responseMutex );
        NVEC_REMOVE_FROM_Q( ec->response, responseNode, t, p );
        DISP_MESSAGE(("\r\nSendReq responseBegin=0x%x", ec->responseBegin));
        NvOsMutexUnlock( ec->responseMutex );
        goto fail;
    }

    if ( pResponse )
    {
        // Wait on Response returns
        NvOsSemaphoreWait( responseSema );
        DISP_MESSAGE(("\r\nSendReq Out of resp sema"));
        NV_CHECK_ERROR_CLEANUP( responseNode->status );
        NvOsMemcpy(pResponse, &responseNode->response, ResponseSize);
    }
    // if successful, nodes should be de-queue already but not freed yet

fail:
    NvOsSemaphoreDestroy( requestSema );
    NvOsSemaphoreDestroy( responseSema );
    DISP_MESSAGE(("\r\nSendReq Freeing requestNode=0x%x, responseNode=0x%x", 
        requestNode, responseNode));
    NvOsFree( requestNode );
    NvOsFree( responseNode );
    return e;
}
Ejemplo n.º 29
0
void
NvEcClose(NvEcHandle hEc)
{
    NvEcPrivState   *ec;
    NvBool          destroy = NV_FALSE;

    if ( NULL == hEc )
        return;

    NV_ASSERT( s_refcount );

    ec = hEc->ec;
    NvOsMutexLock( ec->mutex );

    // FIXME: handle client still with outstanding event types
    if ( !--s_refcount )
    {
        NvEcPrivDeinitHook(ec->hEc);

        NV_ASSERT( NULL == ec->eventReg[hEc->tag].regBegin &&
                    NULL == ec->eventReg[hEc->tag].regEnd );
        NV_ASSERT( NULL == ec->requestBegin && NULL == ec->requestEnd );
        NV_ASSERT( NULL == ec->responseBegin && NULL == ec->responseEnd );
#ifndef CONFIG_TEGRA_ODM_BETELGEUSE
        ec->exitPingThread = NV_TRUE;
        NvOsSemaphoreSignal( ec->hPingSema );
        NvOsThreadJoin( ec->hPingThread );
#endif
        ec->exitThread = NV_TRUE;
        NvOsSemaphoreSignal( ec->sema );
        NvOsThreadJoin( ec->thread );

        NvEcTransportClose( ec->transport );
        NvOsMutexDestroy( ec->requestMutex );
        NvOsMutexDestroy( ec->responseMutex );
        NvOsMutexDestroy( ec->eventMutex );
        NvOsSemaphoreDestroy( ec->sema );
#ifndef CONFIG_TEGRA_ODM_BETELGEUSE
        NvOsSemaphoreDestroy( ec->hPingSema );
#endif
        NvOsSemaphoreDestroy( ec->LowPowerEntrySema );
        NvOsSemaphoreDestroy( ec->LowPowerExitSema );
        destroy = NV_TRUE;

        NvOsFree( ec->eventNodes );
        NvOsFree( ec->hEc );
    }

    // Set this flag as FALSE to indicate power is disabled
    //Daniel 20100723, if we change power state to NV_FALSE, we won't be able to suspend/poweroff it.
    //Is there any side effect ????? 
    //ec->powerState = NV_FALSE;

    NV_ASSERT( hEc->tag < NVEC_MAX_REQUESTOR_TAG );
    ec->tagAllocated[hEc->tag] = NV_FALSE;      // to be recycled

    NvOsFree( hEc );
    NvOsMutexUnlock( ec->mutex );

    if ( destroy )
    {
        NvOsMutexDestroy( ec->mutex );
        NvOsMemset( ec, 0, sizeof(NvEcPrivState) );
        ec->mutex = NULL;
    }
}
Ejemplo n.º 30
0
NvError
NvRmPowerVoltageControl(
    NvRmDeviceHandle hRmDeviceHandle,
    NvRmModuleID ModuleId,
    NvU32 ClientId,
    NvRmMilliVolts MinVolts,
    NvRmMilliVolts MaxVolts,
    const NvRmMilliVolts* PrefVoltageList,
    NvU32 PrefVoltageListCount,
    NvRmMilliVolts* pCurrentVolts)
{
    NvError error;
    NvU32 PowerGroup = 0;
    NvBool PowerChanged = NV_FALSE;
    NvRmModuleInstance *pInstance = NULL;
    ModuleVoltageReq* pVoltageReq = NULL;
    NvRmPowerClient* pPowerClient = NULL;
    NvRmPowerRegistry* pRegistry = &s_PowerRegistry;
    NvU32 ClientIndex = NVRM_POWER_ID2INDEX(ClientId);

    /* validate the Rm Handle */
    NV_ASSERT(hRmDeviceHandle);

    // Validate module ID and get associated Power Group
    if (ModuleId == NvRmPrivModuleID_System)
    {
        PowerGroup = NVRM_POWERGROUP_NPG_AUTO;
    }
    else
    {
        error = NvRmPrivGetModuleInstance(hRmDeviceHandle, ModuleId, &pInstance);
        if (error != NvSuccess)
        {
            NV_ASSERT(!" Voltage control: Invalid module ID. ");
            return NvError_ModuleNotPresent;
        }
        PowerGroup = pInstance->DevPowerGroup;
        NV_ASSERT(PowerGroup < NV_POWERGROUP_MAX);
    }

    NvOsMutexLock(s_hPowerClientMutex);

    // Check if this ID was registered; return error otherwise
    if (ClientIndex < pRegistry->UsedIndexRange)
    {
        pPowerClient = pRegistry->pPowerClients[ClientIndex];
    }
    if ((pPowerClient == NULL) || (pPowerClient->id != ClientId))
    {
        NvOsMutexUnlock(s_hPowerClientMutex);
        return NvError_BadValue;
    }

    // Search for the previously recorded voltage request for this module
    pVoltageReq = pPowerClient->pVoltageReqHead;
    while ((pVoltageReq != NULL) && (pVoltageReq->ModuleId != ModuleId))
    {
        pVoltageReq = pVoltageReq->pNext;
    }

    // If it is a new voltage request record, allocate and fill it in,
    // otherwise just update power status. In both cases determine if
    // power requirements for the module have changed.
    if (pVoltageReq == NULL)
    {
        pVoltageReq = NvOsAlloc(sizeof(*pVoltageReq));
        if (pVoltageReq == NULL)
        {
            NvOsMutexUnlock(s_hPowerClientMutex);
            return NvError_InsufficientMemory;
        }
        // Link at head
        pVoltageReq->pNext = pPowerClient->pVoltageReqHead;
        pPowerClient->pVoltageReqHead = pVoltageReq;
        pVoltageReq->ModuleId = ModuleId;
        pVoltageReq->PowerGroup = PowerGroup;
        pVoltageReq->PowerCycled = NV_FALSE;

        // Only new power On request counts as change
        PowerChanged = (MaxVolts != NvRmVoltsOff);
    }
    else
    {
        // Only changes from On to Off or vice versa counts
        PowerChanged = (pVoltageReq->MaxVolts != MaxVolts) &&
                       ((pVoltageReq->MaxVolts == NvRmVoltsOff) ||
                        (MaxVolts == NvRmVoltsOff));
    }
    // Record new power request voltages
    pVoltageReq->MinVolts = MinVolts;
    pVoltageReq->MaxVolts = MaxVolts;

    // If module power requirements have changed, update power group reference
    // count, and execute the respective h/w power control procedure
    if (PowerChanged)
    {
        if (MaxVolts != NvRmVoltsOff)
        {
            s_PowerOnRefCounts[PowerGroup]++;
            if (s_PowerOnRefCounts[PowerGroup] == 1)
            {
                NvRmMilliVolts v =
                    NvRmPrivPowerGroupGetVoltage(hRmDeviceHandle, PowerGroup);
                if (v == NvRmVoltsOff)
                {
                    RecordPowerCycle(hRmDeviceHandle, PowerGroup);
                    NvRmPrivPowerGroupControl(hRmDeviceHandle, PowerGroup, NV_TRUE);
                }
            }
        }
        else
        {
            NV_ASSERT(s_PowerOnRefCounts[PowerGroup] != 0);
            if (s_PowerOnRefCounts[PowerGroup] == 0)
            {
                NVRM_POWER_PRINTF(("Power balance failed: module %d\n", ModuleId));
            }
            s_PowerOnRefCounts[PowerGroup]--;
            if (s_PowerOnRefCounts[PowerGroup] == 0)
            {
                NvRmPrivPowerGroupControl(hRmDeviceHandle, PowerGroup, NV_FALSE);
            }
        }
    }
    ReportRmPowerState(hRmDeviceHandle);

    // Return current voltage, unless this is the first request after module
    // was power cycled by RM; in the latter case return NvRmVoltsCycled value
    if (pCurrentVolts != NULL)
    {
        *pCurrentVolts = NvRmPrivPowerGroupGetVoltage(hRmDeviceHandle, PowerGroup);
        if (pVoltageReq->PowerCycled && (*pCurrentVolts != NvRmVoltsOff))
        {
            *pCurrentVolts = NvRmVoltsCycled;
        }
    }
    // In any case clear power cycled indicator
    pVoltageReq->PowerCycled = NV_FALSE;

    NvOsMutexUnlock(s_hPowerClientMutex);
    return NvSuccess;
}