/***************************************************************************//**
OLED_write_data()
See "oled.h" for details of how to use this function.
*/
void OLED_write_data(struct oled_data* data, oled_no_of_line LINES)
{
uint8_t line;
uint8_t char_offset;
char *string;
switch(LINES)
{
case FIRST_LINE:
{
OLED_clear_display(FIRST_LINE);
line = data->line1;
char_offset = data->char_offset1;
string = data->string1;
}
case SECOND_LINE:
{
OLED_clear_display(SECOND_LINE);
line = data->line2;
char_offset = data->char_offset2;
string = data->string2;
}
case BOTH_LINES:
{
OLED_clear_display(BOTH_LINES);
line = data->line1;
char_offset = data->char_offset1;
string = data->string1;
OLED_set_cursor(line,char_offset);
OLED_write_string(string);
line = data->line2;
char_offset = data->char_offset2;
string = data->string2;
}
OLED_set_cursor(line,char_offset);
OLED_write_string(string);
OLED_contrast(data->contrast_val);
}
}
int_t main(void)
{
error_t error;
NetInterface *interface;
OsTask *task;
MacAddr macAddr;
#if (APP_USE_DHCP == DISABLED)
Ipv4Addr ipv4Addr;
#endif
#if (APP_USE_SLAAC == DISABLED)
Ipv6Addr ipv6Addr;
#endif
//Update system core clock
SystemCoreClockUpdate();
//Initialize kernel
osInitKernel();
//Configure debug UART
debugInit(115200);
//Start-up message
TRACE_INFO("\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("*** CycloneTCP FTP Client Demo ***\r\n");
TRACE_INFO("**********************************\r\n");
TRACE_INFO("Copyright: 2010-2014 Oryx Embedded\r\n");
TRACE_INFO("Compiled: %s %s\r\n", __DATE__, __TIME__);
TRACE_INFO("Target: A2F200M3F\r\n");
TRACE_INFO("\r\n");
//LED configuration
MSS_GPIO_init();
MSS_GPIO_config(MSS_GPIO_0, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_1, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_2, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_3, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_4, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_5, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_6, MSS_GPIO_OUTPUT_MODE);
MSS_GPIO_config(MSS_GPIO_7, MSS_GPIO_OUTPUT_MODE);
//Clear LEDs
MSS_GPIO_set_output(MSS_GPIO_0, 1);
MSS_GPIO_set_output(MSS_GPIO_1, 1);
MSS_GPIO_set_output(MSS_GPIO_2, 1);
MSS_GPIO_set_output(MSS_GPIO_3, 1);
MSS_GPIO_set_output(MSS_GPIO_4, 1);
MSS_GPIO_set_output(MSS_GPIO_5, 1);
MSS_GPIO_set_output(MSS_GPIO_6, 1);
MSS_GPIO_set_output(MSS_GPIO_7, 1);
//Initialize SW1 and SW2
MSS_GPIO_config(MSS_GPIO_8, MSS_GPIO_INPUT_MODE);
MSS_GPIO_config(MSS_GPIO_9, MSS_GPIO_INPUT_MODE);
//Initialize LCD display
OLED_init();
OLED_contrast(OLED_CONTRAST_VAL);
OLED_clear_display(BOTH_LINES);
//Welcome message
lcdSetCursor(0, 0);
printf("FTP Client Demo");
//TCP/IP stack initialization
error = tcpIpStackInit();
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize TCP/IP stack!\r\n");
}
//Configure the first Ethernet interface
interface = &netInterface[0];
//Set interface name
tcpIpStackSetInterfaceName(interface, "eth0");
//Set host name
tcpIpStackSetHostname(interface, "FTPClientDemo");
//Select the relevant network adapter
tcpIpStackSetDriver(interface, &a2fxxxm3EthDriver);
tcpIpStackSetPhyDriver(interface, &dp83848PhyDriver);
//Set host MAC address
macStringToAddr(APP_MAC_ADDR, &macAddr);
tcpIpStackSetMacAddr(interface, &macAddr);
//Initialize network interface
error = tcpIpStackConfigInterface(interface);
//Any error to report?
if(error)
{
//Debug message
TRACE_ERROR("Failed to configure interface %s!\r\n", interface->name);
}
#if (IPV4_SUPPORT == ENABLED)
#if (APP_USE_DHCP == ENABLED)
//Get default settings
dhcpClientGetDefaultSettings(&dhcpClientSettings);
//Set the network interface to be configured by DHCP
dhcpClientSettings.interface = interface;
//Disable rapid commit option
dhcpClientSettings.rapidCommit = FALSE;
//DHCP client initialization
error = dhcpClientInit(&dhcpClientContext, &dhcpClientSettings);
//Failed to initialize DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize DHCP client!\r\n");
}
//Start DHCP client
error = dhcpClientStart(&dhcpClientContext);
//Failed to start DHCP client?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start DHCP client!\r\n");
}
#else
//Set IPv4 host address
ipv4StringToAddr(APP_IPV4_HOST_ADDR, &ipv4Addr);
ipv4SetHostAddr(interface, ipv4Addr);
//Set subnet mask
ipv4StringToAddr(APP_IPV4_SUBNET_MASK, &ipv4Addr);
ipv4SetSubnetMask(interface, ipv4Addr);
//Set default gateway
ipv4StringToAddr(APP_IPV4_DEFAULT_GATEWAY, &ipv4Addr);
ipv4SetDefaultGateway(interface, ipv4Addr);
//Set primary and secondary DNS servers
ipv4StringToAddr(APP_IPV4_PRIMARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 0, ipv4Addr);
ipv4StringToAddr(APP_IPV4_SECONDARY_DNS, &ipv4Addr);
ipv4SetDnsServer(interface, 1, ipv4Addr);
#endif
#endif
#if (IPV6_SUPPORT == ENABLED)
#if (APP_USE_SLAAC == ENABLED)
//Get default settings
slaacGetDefaultSettings(&slaacSettings);
//Set the network interface to be configured
slaacSettings.interface = interface;
//SLAAC initialization
error = slaacInit(&slaacContext, &slaacSettings);
//Failed to initialize SLAAC?
if(error)
{
//Debug message
TRACE_ERROR("Failed to initialize SLAAC!\r\n");
}
//Start IPv6 address autoconfiguration process
error = slaacStart(&slaacContext);
//Failed to start SLAAC process?
if(error)
{
//Debug message
TRACE_ERROR("Failed to start SLAAC!\r\n");
}
#else
//Set link-local address
ipv6StringToAddr(APP_IPV6_LINK_LOCAL_ADDR, &ipv6Addr);
ipv6SetLinkLocalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set IPv6 prefix
ipv6StringToAddr(APP_IPV6_PREFIX, &ipv6Addr);
ipv6SetPrefix(interface, &ipv6Addr, APP_IPV6_PREFIX_LENGTH);
//Set global address
ipv6StringToAddr(APP_IPV6_GLOBAL_ADDR, &ipv6Addr);
ipv6SetGlobalAddr(interface, &ipv6Addr, IPV6_ADDR_STATE_VALID);
//Set router
ipv6StringToAddr(APP_IPV6_ROUTER, &ipv6Addr);
ipv6SetRouter(interface, &ipv6Addr);
//Set primary and secondary DNS servers
ipv6StringToAddr(APP_IPV6_PRIMARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 0, &ipv6Addr);
ipv6StringToAddr(APP_IPV6_SECONDARY_DNS, &ipv6Addr);
ipv6SetDnsServer(interface, 1, &ipv6Addr);
#endif
#endif
//Create user task
task = osCreateTask("User Task", userTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Create a task to blink the LED
task = osCreateTask("Blink", blinkTask, NULL, 500, 1);
//Failed to create the task?
if(task == OS_INVALID_HANDLE)
{
//Debug message
TRACE_ERROR("Failed to create task!\r\n");
}
//Start the execution of tasks
osStartKernel();
//This function should never return
return 0;
}