int
onlp_sysi_oids_get(onlp_oid_t* table, int max)
{
onlp_oid_t* e = table;
memset(table, 0, max*sizeof(onlp_oid_t));
int i;
/* 2 PSUs */
*e++ = ONLP_PSU_ID_CREATE(1);
*e++ = ONLP_PSU_ID_CREATE(2);
/* LEDs Item */
for (i=1; i<=CHASSIS_LED_COUNT; i++)
{
*e++ = ONLP_LED_ID_CREATE(i);
}
/* THERMALs Item */
for (i=1; i<=CHASSIS_THERMAL_COUNT; i++)
{
*e++ = ONLP_THERMAL_ID_CREATE(i);
}
/* Fans Item */
for (i=1; i<=CHASSIS_FAN_COUNT; i++)
{
*e++ = ONLP_FAN_ID_CREATE(i);
}
return 0;
}
int
onlp_sysi_oids_get(onlp_oid_t* table, int max)
{
onlp_oid_t* e = table;
memset(table, 0, max*sizeof(onlp_oid_t));
/* 2 PSUs */
*e++ = ONLP_PSU_ID_CREATE(1);
*e++ = ONLP_PSU_ID_CREATE(2);
/* 1 Fan */
*e++ = ONLP_FAN_ID_CREATE(1);
/* 9 Thermal sensors */
*e++ = ONLP_THERMAL_ID_CREATE(1);
*e++ = ONLP_THERMAL_ID_CREATE(2);
*e++ = ONLP_THERMAL_ID_CREATE(3);
*e++ = ONLP_THERMAL_ID_CREATE(4);
*e++ = ONLP_THERMAL_ID_CREATE(5);
*e++ = ONLP_THERMAL_ID_CREATE(6);
*e++ = ONLP_THERMAL_ID_CREATE(7);
*e++ = ONLP_THERMAL_ID_CREATE(8);
*e++ = ONLP_THERMAL_ID_CREATE(11);
/* 5 LEDs */
*e++ = ONLP_LED_ID_CREATE(1);
*e++ = ONLP_LED_ID_CREATE(2);
*e++ = ONLP_LED_ID_CREATE(3);
*e++ = ONLP_LED_ID_CREATE(4);
*e++ = ONLP_LED_ID_CREATE(5);
return 0;
}
int
onlp_sysi_platform_manage_leds(void)
{
int rv;
onlp_fan_info_t fi;
onlp_led_mode_t mode = ONLP_LED_MODE_GREEN;
rv = onlp_fani_info_get(ONLP_FAN_ID_CREATE(1), &fi);
if(rv < 0) {
mode = ONLP_LED_MODE_ORANGE;
}
else if((fi.status & 1) == 0) {
mode = ONLP_LED_MODE_OFF;
}
else if(fi.status & ONLP_FAN_STATUS_FAILED) {
mode = ONLP_LED_MODE_ORANGE;
}
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(2), mode);
onlp_psu_info_t pi;
mode = ONLP_LED_MODE_GREEN;
rv = onlp_psu_info_get(ONLP_PSU_ID_CREATE(1), &pi);
if(rv < 0) {
mode = ONLP_LED_MODE_ORANGE;
}
else if((pi.status & 1) == 0) {
mode = ONLP_LED_MODE_OFF;
}
else if(pi.status & ONLP_PSU_STATUS_FAILED) {
mode = ONLP_LED_MODE_ORANGE;
}
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(4), mode);
mode = ONLP_LED_MODE_GREEN;
rv = onlp_psu_info_get(ONLP_PSU_ID_CREATE(2), &pi);
if(rv < 0) {
mode = ONLP_LED_MODE_ORANGE;
}
else if((pi.status & 1) == 0) {
mode = ONLP_LED_MODE_OFF;
}
else if(pi.status & ONLP_PSU_STATUS_FAILED) {
mode = ONLP_LED_MODE_ORANGE;
}
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(5), mode);
return 0;
}
int
onlp_sysi_oids_get(onlp_oid_t* table, int max)
{
int i;
onlp_oid_t* e = table;
memset(table, 0, max*sizeof(onlp_oid_t));
/* 6 Thermal sensors on the chassis */
for (i = 1; i <= CHASSIS_THERMAL_COUNT; i++) {
*e++ = ONLP_THERMAL_ID_CREATE(i);
}
/* 5 LEDs on the chassis */
for (i = 1; i <= CHASSIS_LED_COUNT; i++) {
*e++ = ONLP_LED_ID_CREATE(i);
}
/* 2 PSUs on the chassis */
for (i = 1; i <= CHASSIS_PSU_COUNT; i++) {
*e++ = ONLP_PSU_ID_CREATE(i);
}
/* 6 Fans on the chassis */
for (i = 1; i <= CHASSIS_FAN_COUNT; i++) {
*e++ = ONLP_FAN_ID_CREATE(i);
}
return 0;
}
int
onlp_sysi_oids_get(onlp_oid_t* table, int max)
{
int i;
onlp_oid_t* e = table;
memset(table, 0, max*sizeof(onlp_oid_t));
/* 4 Thermal sensors on the chassis */
for (i = 1; i <= NUM_OF_THERMAL_ON_MAIN_BROAD; i++)
{
*e++ = ONLP_THERMAL_ID_CREATE(i);
}
/* 5 LEDs on the chassis */
for (i = 1; i <= NUM_OF_LED_ON_MAIN_BROAD; i++)
{
*e++ = ONLP_LED_ID_CREATE(i);
}
/* 2 PSUs on the chassis */
for (i = 1; i <= NUM_OF_PSU_ON_MAIN_BROAD; i++)
{
*e++ = ONLP_PSU_ID_CREATE(i);
}
/* 4 Fans on the chassis */
for (i = 1; i <= NUM_OF_FAN_ON_MAIN_BROAD; i++)
{
*e++ = ONLP_FAN_ID_CREATE(i);
}
return 0;
}
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
},
{ { ONLP_THERMAL_ID_CREATE(THERMAL_4_ON_MAIN_BROAD), "LM75-4", 0},
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
},
{ { ONLP_THERMAL_ID_CREATE(THERMAL_5_ON_MAIN_BROAD), "LM75-5", 0},
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
},
{ { ONLP_THERMAL_ID_CREATE(THERMAL_6_ON_MAIN_BROAD), "LM75-6", 0},
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
},
{ { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU1), "PSU-1 Thermal Sensor 1", ONLP_PSU_ID_CREATE(PSU1_ID)},
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
},
{ { ONLP_THERMAL_ID_CREATE(THERMAL_1_ON_PSU2), "PSU-2 Thermal Sensor 1", ONLP_PSU_ID_CREATE(PSU2_ID)},
ONLP_THERMAL_STATUS_PRESENT,
ONLP_THERMAL_CAPS_ALL, 0, ONLP_THERMAL_THRESHOLD_INIT_DEFAULTS
}
};
/*
* This will be called to intiialize the thermali subsystem.
*/
int
onlp_thermali_init(void)
{
if (psu_ym2651y_pmbus_info_get(index, "psu_p_out", &val) == 0) {
info->mpout = val;
info->caps |= ONLP_PSU_CAPS_POUT;
}
return ONLP_STATUS_OK;
}
/*
* Get all information about the given PSU oid.
*/
static onlp_psu_info_t pinfo[] =
{
{ }, /* Not used */
{
{ ONLP_PSU_ID_CREATE(PSU1_ID), "PSU-1", 0 },
},
{
{ ONLP_PSU_ID_CREATE(PSU2_ID), "PSU-2", 0 },
}
};
int
onlp_psui_info_get(onlp_oid_t id, onlp_psu_info_t* info)
{
int val = 0;
int ret = ONLP_STATUS_OK;
int index = ONLP_OID_ID_GET(id);
psu_type_t psu_type;
VALIDATE(id);
int
onlp_sysi_platform_manage_leds(void)
{
int rc,rc1;
onlp_fan_info_t info1,info2;
onlp_led_mode_t fan_new_mode;
onlp_thermal_info_t ti;
onlp_led_mode_t temp_new_mode;
onlp_psu_info_t psu1;
onlp_led_mode_t psu1_new_mode;
onlp_psu_info_t psu2;
onlp_led_mode_t psu2_new_mode;
onlp_led_mode_t sys_new_mode;
/*fan led */
rc=onlp_fani_info_get(ONLP_FAN_ID_CREATE(1), &info1);
rc1=onlp_fani_info_get(ONLP_FAN_ID_CREATE(2), &info2);
if ((rc != ONLP_STATUS_OK)||(rc1 != ONLP_STATUS_OK)){
fan_new_mode=ONLP_LED_MODE_RED;
goto temp_led;
}
if(((info1.status&0x3)==1)&&((info2.status&0x3)==1))
fan_new_mode=ONLP_LED_MODE_GREEN;
else
fan_new_mode=ONLP_LED_MODE_RED;
temp_led:
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN),fan_new_mode);
/*temperature led */
rc = onlp_thermali_info_get(ONLP_THERMAL_ID_CREATE(1), &ti);
if (rc != ONLP_STATUS_OK) {
temp_new_mode=ONLP_LED_MODE_OFF;
goto psu1_led;
}
if(ti.mcelsius >= 75000)
temp_new_mode=ONLP_LED_MODE_RED;
else
temp_new_mode=ONLP_LED_MODE_GREEN;
psu1_led:
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_TEMP),temp_new_mode);
/*psu1 and psu2 led */
rc=onlp_psui_info_get(ONLP_PSU_ID_CREATE(1),&psu1);
if (rc != ONLP_STATUS_OK) {
psu1_new_mode=ONLP_LED_MODE_OFF;
goto psu2_led;
}
if((psu1.status&0x1)&&!(psu1.status&0x2))
psu1_new_mode=ONLP_LED_MODE_GREEN;
else
psu1_new_mode=ONLP_LED_MODE_OFF;
psu2_led:
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_PSU1),psu1_new_mode);
//psu2 led ----------------
rc=onlp_psui_info_get(ONLP_PSU_ID_CREATE(2),&psu2);
if (rc != ONLP_STATUS_OK) {
psu2_new_mode=ONLP_LED_MODE_OFF;
goto sys_led;
}
if((psu2.status&0x1)&&!(psu2.status&0x2))
psu2_new_mode=ONLP_LED_MODE_GREEN;
else
psu2_new_mode=ONLP_LED_MODE_OFF;
sys_led :
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_PSU2),psu2_new_mode);
//sys led ----------------
if((fan_new_mode!=ONLP_LED_MODE_GREEN)||((psu2_new_mode!=ONLP_LED_MODE_GREEN)&& \
(psu1_new_mode!=ONLP_LED_MODE_GREEN)))
sys_new_mode=ONLP_LED_MODE_RED_BLINKING;
else
sys_new_mode=ONLP_LED_MODE_GREEN;
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_SYS),sys_new_mode);
return ONLP_STATUS_OK;
}
return ONLP_STATUS_OK;
}
/*
* Get the fan information.
*/
/* Static fan information */
onlp_fan_info_t finfo[] = {
{ }, /* Not used */
{
{ ONLP_FAN_ID_CREATE(FAN_ID_CHASSIS), "Chassis Fan 1", 0 },
},
{
{ ONLP_FAN_ID_CREATE(FAN_ID_PSU1), "PSU-1 Fan 1", ONLP_PSU_ID_CREATE(1) },
},
{
{ ONLP_FAN_ID_CREATE(FAN_ID_PSU2), "PSU-2 Fan 1", ONLP_PSU_ID_CREATE(2) },
}
};
static int
chassis_fan_get_info(onlp_fan_info_t* info)
{
unsigned char data;
info->status = 0;
data = cpld_base__[CPLD_REG_SYS_STATUS];
/* Get the present bit */
int
onlp_sysi_platform_manage_leds(void)
{
int i,tray_i,rc;
onlp_fan_info_t info;
onlp_led_mode_t fan_new_mode;
onlp_led_mode_t fan_tray_new_mode[3];
onlp_psu_info_t psu;
onlp_led_mode_t psu_new_mode;
onlp_led_mode_t sys_new_mode;
onlp_led_mode_t locator_new_mode;
/*fan led */
/*fan led */
for(tray_i=0;tray_i<3;tray_i++){
for(i=CHASSIS_FAN_COUNT-2*tray_i;i>=CHASSIS_FAN_COUNT-2*tray_i-1;i--){
rc=onlp_fani_info_get(ONLP_FAN_ID_CREATE(i), &info);
if ((rc != ONLP_STATUS_OK) ||((info.status&0x1)!=1)){
fan_tray_new_mode[tray_i]=ONLP_LED_MODE_OFF;
goto tray_next;
}
else{
if((info.status&0x2)==1){
fan_tray_new_mode[tray_i]=ONLP_LED_MODE_YELLOW;
goto tray_next;
}
}
}
fan_tray_new_mode[tray_i]=ONLP_LED_MODE_GREEN;
tray_next: continue;
}
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN_TRAY0),fan_tray_new_mode[0]);
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN_TRAY1),fan_tray_new_mode[1]);
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN_TRAY2),fan_tray_new_mode[2]);
if((fan_tray_new_mode[0]==ONLP_LED_MODE_GREEN)&&(fan_tray_new_mode[1]==ONLP_LED_MODE_GREEN)&&
(fan_tray_new_mode[2]==ONLP_LED_MODE_GREEN))
fan_new_mode=ONLP_LED_MODE_GREEN;
else if((fan_tray_new_mode[0]==ONLP_LED_MODE_OFF)||(fan_tray_new_mode[1]==ONLP_LED_MODE_OFF)||
(fan_tray_new_mode[2]==ONLP_LED_MODE_OFF))
fan_new_mode=ONLP_LED_MODE_YELLOW;
else
fan_new_mode=ONLP_LED_MODE_YELLOW_BLINKING;
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_FAN),fan_new_mode);
/*psu1 and psu2 led */
for(i=1;i<=CHASSIS_PSU_COUNT;i++){
rc=onlp_psui_info_get(ONLP_PSU_ID_CREATE(i),&psu);
if (rc != ONLP_STATUS_OK) {
continue;
}
if((psu.status&0x1)&&!(psu.status&0x2)){
psu_new_mode=ONLP_LED_MODE_GREEN;
goto sys_led;
}
}
psu_new_mode=ONLP_LED_MODE_YELLOW_BLINKING;
sys_led :
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_POWER),psu_new_mode);
//sys led ----------------
if((fan_new_mode!=ONLP_LED_MODE_GREEN)||(psu_new_mode!=ONLP_LED_MODE_GREEN))
sys_new_mode=ONLP_LED_MODE_YELLOW_BLINKING;
else
sys_new_mode=ONLP_LED_MODE_GREEN;
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_SYS),sys_new_mode);
locator_new_mode=ONLP_LED_MODE_BLUE;
onlp_ledi_mode_set(ONLP_LED_ID_CREATE(LED_LOCATOR),locator_new_mode);
return ONLP_STATUS_OK;
}
