/**
* Initialize the module, called on startup.
* \returns 0 on success or -1 if initialization failed
*/
int32_t PipXtremeModInitialize(void)
{
// Must registers objects here for system thread because ObjectManager started in OpenPilotInit
// Initialize out status object.
OPLinkStatusInitialize();
OPLinkStatusData oplinkStatus;
OPLinkStatusGet(&oplinkStatus);
// Get our hardware information.
const struct pios_board_info * bdinfo = &pios_board_info_blob;
oplinkStatus.BoardType= bdinfo->board_type;
PIOS_BL_HELPER_FLASH_Read_Description(oplinkStatus.Description, OPLINKSTATUS_DESCRIPTION_NUMELEM);
PIOS_SYS_SerialNumberGetBinary(oplinkStatus.CPUSerial);
oplinkStatus.BoardRevision= bdinfo->board_rev;
// Update the object
OPLinkStatusSet(&oplinkStatus);
// Call the module start function.
PipXtremeModStart();
return 0;
}
void PIOS_Board_Init(void)
{
const struct pios_board_info *bdinfo = &pios_board_info_blob;
#if defined(PIOS_INCLUDE_LED)
const struct pios_gpio_cfg *led_cfg = PIOS_BOARD_HW_DEFS_GetLedCfg(bdinfo->board_rev);
PIOS_Assert(led_cfg);
PIOS_LED_Init(led_cfg);
#endif /* PIOS_INCLUDE_LED */
#ifdef PIOS_INCLUDE_INSTRUMENTATION
PIOS_Instrumentation_Init(PIOS_INSTRUMENTATION_MAX_COUNTERS);
#endif
/* Set up the SPI interface to the gyro/acelerometer */
if (PIOS_SPI_Init(&pios_spi_gyro_id, &pios_spi_gyro_cfg)) {
PIOS_DEBUG_Assert(0);
}
/* Set up the SPI interface to the flash and rfm22b */
if (PIOS_SPI_Init(&pios_spi_telem_flash_id, &pios_spi_telem_flash_cfg)) {
PIOS_DEBUG_Assert(0);
}
#if defined(PIOS_INCLUDE_FLASH)
/* Connect flash to the appropriate interface and configure it */
uintptr_t flash_id;
// Initialize the external USER flash
if (PIOS_Flash_Jedec_Init(&flash_id, pios_spi_telem_flash_id, 1)) {
PIOS_DEBUG_Assert(0);
}
if (PIOS_FLASHFS_Logfs_Init(&pios_uavo_settings_fs_id, &flashfs_external_system_cfg, &pios_jedec_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* if defined(PIOS_INCLUDE_FLASH) */
#if defined(PIOS_INCLUDE_RTC)
PIOS_RTC_Init(&pios_rtc_main_cfg);
#endif
/* IAP System Setup */
PIOS_IAP_Init();
// check for safe mode commands from gcs
if (PIOS_IAP_ReadBootCmd(0) == PIOS_IAP_CLEAR_FLASH_CMD_0 &&
PIOS_IAP_ReadBootCmd(1) == PIOS_IAP_CLEAR_FLASH_CMD_1 &&
PIOS_IAP_ReadBootCmd(2) == PIOS_IAP_CLEAR_FLASH_CMD_2) {
PIOS_FLASHFS_Format(pios_uavo_settings_fs_id);
PIOS_IAP_WriteBootCmd(0, 0);
PIOS_IAP_WriteBootCmd(1, 0);
PIOS_IAP_WriteBootCmd(2, 0);
}
#ifdef PIOS_INCLUDE_WDG
PIOS_WDG_Init();
#endif
/* Initialize the task monitor */
if (PIOS_TASK_MONITOR_Initialize(TASKINFO_RUNNING_NUMELEM)) {
PIOS_Assert(0);
}
/* Initialize the delayed callback library */
PIOS_CALLBACKSCHEDULER_Initialize();
/* Initialize UAVObject libraries */
EventDispatcherInitialize();
UAVObjInitialize();
HwSettingsInitialize();
#if defined(PIOS_INCLUDE_RFM22B)
OPLinkSettingsInitialize();
OPLinkStatusInitialize();
#endif /* PIOS_INCLUDE_RFM22B */
/* Initialize the alarms library */
AlarmsInitialize();
/* Set up pulse timers */
PIOS_TIM_InitClock(&tim_1_cfg);
PIOS_TIM_InitClock(&tim_3_cfg);
PIOS_TIM_InitClock(&tim_4_cfg);
PIOS_TIM_InitClock(&tim_5_cfg);
PIOS_TIM_InitClock(&tim_8_cfg);
PIOS_TIM_InitClock(&tim_9_cfg);
PIOS_TIM_InitClock(&tim_10_cfg);
PIOS_TIM_InitClock(&tim_11_cfg);
PIOS_TIM_InitClock(&tim_12_cfg);
uint16_t boot_count = PIOS_IAP_ReadBootCount();
if (boot_count < 3) {
PIOS_IAP_WriteBootCount(++boot_count);
AlarmsClear(SYSTEMALARMS_ALARM_BOOTFAULT);
} else {
/* Too many failed boot attempts, force hwsettings to defaults */
HwSettingsSetDefaults(HwSettingsHandle(), 0);
AlarmsSet(SYSTEMALARMS_ALARM_BOOTFAULT, SYSTEMALARMS_ALARM_CRITICAL);
}
/* Configure IO ports */
uint8_t hwsettings_DSMxBind;
HwSettingsDSMxBindGet(&hwsettings_DSMxBind);
/* Configure FlexiPort */
uint8_t hwsettings_flexiport;
HwSettingsRM_FlexiPortGet(&hwsettings_flexiport);
switch (hwsettings_flexiport) {
case HWSETTINGS_RM_FLEXIPORT_DISABLED:
break;
case HWSETTINGS_RM_FLEXIPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_FLEXIPORT_I2C:
#if defined(PIOS_INCLUDE_I2C)
{
if (PIOS_I2C_Init(&pios_i2c_flexiport_adapter_id, &pios_i2c_flexiport_adapter_cfg)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_I2C */
break;
case HWSETTINGS_RM_FLEXIPORT_GPS:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_FLEXIPORT_DSM:
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_flexi_cfg, &pios_dsm_flexi_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMFLEXIPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RM_FLEXIPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_FLEXIPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_flexi_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_FLEXIPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_flexi_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rm_flexiport */
/* Moved this here to allow binding on flexiport */
#if defined(PIOS_INCLUDE_FLASH)
if (PIOS_FLASHFS_Logfs_Init(&pios_user_fs_id, &flashfs_external_user_cfg, &pios_jedec_flash_driver, flash_id)) {
PIOS_DEBUG_Assert(0);
}
#endif /* if defined(PIOS_INCLUDE_FLASH) */
#if defined(PIOS_INCLUDE_USB)
/* Initialize board specific USB data */
PIOS_USB_BOARD_DATA_Init();
/* Flags to determine if various USB interfaces are advertised */
bool usb_hid_present = false;
bool usb_cdc_present = false;
#if defined(PIOS_INCLUDE_USB_CDC)
if (PIOS_USB_DESC_HID_CDC_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
usb_cdc_present = true;
#else
if (PIOS_USB_DESC_HID_ONLY_Init()) {
PIOS_Assert(0);
}
usb_hid_present = true;
#endif
uint32_t pios_usb_id;
PIOS_USB_Init(&pios_usb_id, PIOS_BOARD_HW_DEFS_GetUsbCfg(bdinfo->board_rev));
#if defined(PIOS_INCLUDE_USB_CDC)
uint8_t hwsettings_usb_vcpport;
/* Configure the USB VCP port */
HwSettingsUSB_VCPPortGet(&hwsettings_usb_vcpport);
if (!usb_cdc_present) {
/* Force VCP port function to disabled if we haven't advertised VCP in our USB descriptor */
hwsettings_usb_vcpport = HWSETTINGS_USB_VCPPORT_DISABLED;
}
uint32_t pios_usb_cdc_id;
if (PIOS_USB_CDC_Init(&pios_usb_cdc_id, &pios_usb_cdc_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
uint32_t pios_usb_hid_id;
if (PIOS_USB_HID_Init(&pios_usb_hid_id, &pios_usb_hid_cfg, pios_usb_id)) {
PIOS_Assert(0);
}
switch (hwsettings_usb_vcpport) {
case HWSETTINGS_USB_VCPPORT_DISABLED:
break;
case HWSETTINGS_USB_VCPPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_COMBRIDGE:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_BRIDGE_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_vcp_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
rx_buffer, PIOS_COM_BRIDGE_RX_BUF_LEN,
tx_buffer, PIOS_COM_BRIDGE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
case HWSETTINGS_USB_VCPPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_COM)
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_debug_id, &pios_usb_cdc_com_driver, pios_usb_cdc_id,
NULL, 0,
tx_buffer, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_CDC */
#if defined(PIOS_INCLUDE_USB_HID)
/* Configure the usb HID port */
uint8_t hwsettings_usb_hidport;
HwSettingsUSB_HIDPortGet(&hwsettings_usb_hidport);
if (!usb_hid_present) {
/* Force HID port function to disabled if we haven't advertised HID in our USB descriptor */
hwsettings_usb_hidport = HWSETTINGS_USB_HIDPORT_DISABLED;
}
switch (hwsettings_usb_hidport) {
case HWSETTINGS_USB_HIDPORT_DISABLED:
break;
case HWSETTINGS_USB_HIDPORT_USBTELEMETRY:
#if defined(PIOS_INCLUDE_COM)
{
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_TELEM_USB_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_telem_usb_id, &pios_usb_hid_com_driver, pios_usb_hid_id,
rx_buffer, PIOS_COM_TELEM_USB_RX_BUF_LEN,
tx_buffer, PIOS_COM_TELEM_USB_TX_BUF_LEN)) {
PIOS_Assert(0);
}
}
#endif /* PIOS_INCLUDE_COM */
break;
}
#endif /* PIOS_INCLUDE_USB_HID */
if (usb_hid_present || usb_cdc_present) {
PIOS_USBHOOK_Activate();
}
#endif /* PIOS_INCLUDE_USB */
/* Configure main USART port */
uint8_t hwsettings_mainport;
HwSettingsRM_MainPortGet(&hwsettings_mainport);
switch (hwsettings_mainport) {
case HWSETTINGS_RM_MAINPORT_DISABLED:
break;
case HWSETTINGS_RM_MAINPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
case HWSETTINGS_RM_MAINPORT_GPS:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_GPS_RX_BUF_LEN, PIOS_COM_GPS_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_gps_id);
break;
case HWSETTINGS_RM_MAINPORT_SBUS:
#if defined(PIOS_INCLUDE_SBUS)
{
uint32_t pios_usart_sbus_id;
if (PIOS_USART_Init(&pios_usart_sbus_id, &pios_usart_sbus_main_cfg)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_id;
if (PIOS_SBus_Init(&pios_sbus_id, &pios_sbus_cfg, &pios_usart_com_driver, pios_usart_sbus_id)) {
PIOS_Assert(0);
}
uint32_t pios_sbus_rcvr_id;
if (PIOS_RCVR_Init(&pios_sbus_rcvr_id, &pios_sbus_rcvr_driver, pios_sbus_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_SBUS] = pios_sbus_rcvr_id;
}
#endif
break;
case HWSETTINGS_RM_MAINPORT_DSM:
// Force binding to zero on the main port
hwsettings_DSMxBind = 0;
// TODO: Define the various Channelgroup for Revo dsm inputs and handle here
PIOS_Board_configure_dsm(&pios_usart_dsm_main_cfg, &pios_dsm_main_cfg,
&pios_usart_com_driver, MANUALCONTROLSETTINGS_CHANNELGROUPS_DSMMAINPORT, &hwsettings_DSMxBind);
break;
case HWSETTINGS_RM_MAINPORT_DEBUGCONSOLE:
#if defined(PIOS_INCLUDE_DEBUG_CONSOLE)
{
PIOS_Board_configure_com(&pios_usart_main_cfg, 0, PIOS_COM_DEBUGCONSOLE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_debug_id);
}
#endif /* PIOS_INCLUDE_DEBUG_CONSOLE */
break;
case HWSETTINGS_RM_MAINPORT_COMBRIDGE:
PIOS_Board_configure_com(&pios_usart_main_cfg, PIOS_COM_BRIDGE_RX_BUF_LEN, PIOS_COM_BRIDGE_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_bridge_id);
break;
case HWSETTINGS_RM_MAINPORT_OSDHK:
PIOS_Board_configure_com(&pios_usart_hkosd_main_cfg, PIOS_COM_HKOSD_RX_BUF_LEN, PIOS_COM_HKOSD_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_hkosd_id);
break;
} /* hwsettings_rm_mainport */
if (hwsettings_mainport != HWSETTINGS_RM_MAINPORT_SBUS) {
GPIO_Init(pios_sbus_cfg.inv.gpio, &pios_sbus_cfg.inv.init);
GPIO_WriteBit(pios_sbus_cfg.inv.gpio, pios_sbus_cfg.inv.init.GPIO_Pin, pios_sbus_cfg.gpio_inv_disable);
}
/* Initalize the RFM22B radio COM device. */
#if defined(PIOS_INCLUDE_RFM22B)
/* Fetch the OPinkSettings object. */
OPLinkSettingsData oplinkSettings;
OPLinkSettingsGet(&oplinkSettings);
// Initialize out status object.
OPLinkStatusData oplinkStatus;
OPLinkStatusGet(&oplinkStatus);
oplinkStatus.BoardType = bdinfo->board_type;
PIOS_BL_HELPER_FLASH_Read_Description(oplinkStatus.Description, OPLINKSTATUS_DESCRIPTION_NUMELEM);
PIOS_SYS_SerialNumberGetBinary(oplinkStatus.CPUSerial);
oplinkStatus.BoardRevision = bdinfo->board_rev;
/* Is the radio turned on? */
bool is_coordinator = (oplinkSettings.Coordinator == OPLINKSETTINGS_COORDINATOR_TRUE);
bool is_oneway = (oplinkSettings.OneWay == OPLINKSETTINGS_ONEWAY_TRUE);
bool ppm_mode = (oplinkSettings.PPM == OPLINKSETTINGS_PPM_TRUE);
bool ppm_only = (oplinkSettings.PPMOnly == OPLINKSETTINGS_PPMONLY_TRUE);
if (oplinkSettings.MaxRFPower != OPLINKSETTINGS_MAXRFPOWER_0) {
/* Configure the RFM22B device. */
const struct pios_rfm22b_cfg *rfm22b_cfg = PIOS_BOARD_HW_DEFS_GetRfm22Cfg(bdinfo->board_rev);
if (PIOS_RFM22B_Init(&pios_rfm22b_id, PIOS_RFM22_SPI_PORT, rfm22b_cfg->slave_num, rfm22b_cfg)) {
PIOS_Assert(0);
}
/* Configure the radio com interface */
uint8_t *rx_buffer = (uint8_t *)pios_malloc(PIOS_COM_RFM22B_RF_RX_BUF_LEN);
uint8_t *tx_buffer = (uint8_t *)pios_malloc(PIOS_COM_RFM22B_RF_TX_BUF_LEN);
PIOS_Assert(rx_buffer);
PIOS_Assert(tx_buffer);
if (PIOS_COM_Init(&pios_com_rf_id, &pios_rfm22b_com_driver, pios_rfm22b_id,
rx_buffer, PIOS_COM_RFM22B_RF_RX_BUF_LEN,
tx_buffer, PIOS_COM_RFM22B_RF_TX_BUF_LEN)) {
PIOS_Assert(0);
}
/* Set Telemetry to use OPLinkMini if no other telemetry is configured (USB always overrides anyway) */
if (!pios_com_telem_rf_id) {
pios_com_telem_rf_id = pios_com_rf_id;
}
oplinkStatus.LinkState = OPLINKSTATUS_LINKSTATE_ENABLED;
// Set the RF data rate on the modem to ~2X the selected buad rate because the modem is half duplex.
enum rfm22b_datarate datarate = RFM22_datarate_64000;
switch (oplinkSettings.ComSpeed) {
case OPLINKSETTINGS_COMSPEED_4800:
datarate = RFM22_datarate_9600;
break;
case OPLINKSETTINGS_COMSPEED_9600:
datarate = RFM22_datarate_19200;
break;
case OPLINKSETTINGS_COMSPEED_19200:
datarate = RFM22_datarate_32000;
break;
case OPLINKSETTINGS_COMSPEED_38400:
datarate = RFM22_datarate_64000;
break;
case OPLINKSETTINGS_COMSPEED_57600:
datarate = RFM22_datarate_100000;
break;
case OPLINKSETTINGS_COMSPEED_115200:
datarate = RFM22_datarate_192000;
break;
}
/* Set the radio configuration parameters. */
PIOS_RFM22B_SetCoordinatorID(pios_rfm22b_id, oplinkSettings.CoordID);
PIOS_RFM22B_SetChannelConfig(pios_rfm22b_id, datarate, oplinkSettings.MinChannel, oplinkSettings.MaxChannel, is_coordinator, is_oneway, ppm_mode, ppm_only);
/* Set the PPM callback if we should be receiving PPM. */
if (ppm_mode || (ppm_only && !is_coordinator)) {
PIOS_RFM22B_SetPPMCallback(pios_rfm22b_id, PIOS_Board_PPM_callback);
}
/* Set the modem Tx poer level */
switch (oplinkSettings.MaxRFPower) {
case OPLINKSETTINGS_MAXRFPOWER_125:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_0);
break;
case OPLINKSETTINGS_MAXRFPOWER_16:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_1);
break;
case OPLINKSETTINGS_MAXRFPOWER_316:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_2);
break;
case OPLINKSETTINGS_MAXRFPOWER_63:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_3);
break;
case OPLINKSETTINGS_MAXRFPOWER_126:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_4);
break;
case OPLINKSETTINGS_MAXRFPOWER_25:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_5);
break;
case OPLINKSETTINGS_MAXRFPOWER_50:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_6);
break;
case OPLINKSETTINGS_MAXRFPOWER_100:
PIOS_RFM22B_SetTxPower(pios_rfm22b_id, RFM22_tx_pwr_txpow_7);
break;
default:
// do nothing
break;
}
/* Reinitialize the modem. */
PIOS_RFM22B_Reinit(pios_rfm22b_id);
} else {
oplinkStatus.LinkState = OPLINKSTATUS_LINKSTATE_DISABLED;
}
OPLinkStatusSet(&oplinkStatus);
#endif /* PIOS_INCLUDE_RFM22B */
#if defined(PIOS_INCLUDE_PWM) || defined(PIOS_INCLUDE_PWM)
const struct pios_servo_cfg *pios_servo_cfg;
// default to servo outputs only
pios_servo_cfg = &pios_servo_cfg_out;
#endif
/* Configure the receiver port*/
uint8_t hwsettings_rcvrport;
HwSettingsRM_RcvrPortGet(&hwsettings_rcvrport);
//
switch (hwsettings_rcvrport) {
case HWSETTINGS_RM_RCVRPORT_DISABLED:
break;
case HWSETTINGS_RM_RCVRPORT_PWM:
#if defined(PIOS_INCLUDE_PWM)
/* Set up the receiver port. Later this should be optional */
PIOS_Board_configure_pwm(&pios_pwm_cfg);
#endif /* PIOS_INCLUDE_PWM */
break;
case HWSETTINGS_RM_RCVRPORT_PPM:
case HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS:
case HWSETTINGS_RM_RCVRPORT_PPMPWM:
case HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY:
#if defined(PIOS_INCLUDE_PPM)
PIOS_Board_configure_ppm(&pios_ppm_cfg);
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMOUTPUTS) {
// configure servo outputs and the remaining 5 inputs as outputs
pios_servo_cfg = &pios_servo_cfg_out_in_ppm;
}
// enable pwm on the remaining channels
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMPWM) {
PIOS_Board_configure_pwm(&pios_pwm_ppm_cfg);
}
if (hwsettings_rcvrport == HWSETTINGS_RM_RCVRPORT_PPMTELEMETRY) {
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
}
break;
#endif /* PIOS_INCLUDE_PPM */
case HWSETTINGS_RM_RCVRPORT_OUTPUTS:
// configure only the servo outputs
pios_servo_cfg = &pios_servo_cfg_out_in;
break;
case HWSETTINGS_RM_RCVRPORT_TELEMETRY:
PIOS_Board_configure_com(&pios_usart_rcvrport_cfg, PIOS_COM_TELEM_RF_RX_BUF_LEN, PIOS_COM_TELEM_RF_TX_BUF_LEN, &pios_usart_com_driver, &pios_com_telem_rf_id);
break;
}
#if defined(PIOS_INCLUDE_GCSRCVR)
GCSReceiverInitialize();
uint32_t pios_gcsrcvr_id;
PIOS_GCSRCVR_Init(&pios_gcsrcvr_id);
uint32_t pios_gcsrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_gcsrcvr_rcvr_id, &pios_gcsrcvr_rcvr_driver, pios_gcsrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_GCS] = pios_gcsrcvr_rcvr_id;
#endif /* PIOS_INCLUDE_GCSRCVR */
#if defined(PIOS_INCLUDE_OPLINKRCVR)
{
OPLinkReceiverInitialize();
uint32_t pios_oplinkrcvr_id;
PIOS_OPLinkRCVR_Init(&pios_oplinkrcvr_id);
uint32_t pios_oplinkrcvr_rcvr_id;
if (PIOS_RCVR_Init(&pios_oplinkrcvr_rcvr_id, &pios_oplinkrcvr_rcvr_driver, pios_oplinkrcvr_id)) {
PIOS_Assert(0);
}
pios_rcvr_group_map[MANUALCONTROLSETTINGS_CHANNELGROUPS_OPLINK] = pios_oplinkrcvr_rcvr_id;
}
#endif /* PIOS_INCLUDE_OPLINKRCVR */
#ifndef PIOS_ENABLE_DEBUG_PINS
// pios_servo_cfg points to the correct configuration based on input port settings
PIOS_Servo_Init(pios_servo_cfg);
#else
PIOS_DEBUG_Init(pios_tim_servoport_all_pins, NELEMENTS(pios_tim_servoport_all_pins));
#endif
// Disable GPIO_A8 Pullup to prevent wrong results on battery voltage readout
GPIO_InitTypeDef gpioA8 = {
.GPIO_Speed = GPIO_Speed_2MHz,
.GPIO_Mode = GPIO_Mode_IN,
.GPIO_PuPd = GPIO_PuPd_NOPULL,
.GPIO_Pin = GPIO_Pin_8,
.GPIO_OType = GPIO_OType_OD,
};
GPIO_Init(GPIOA, &gpioA8);
if (PIOS_I2C_Init(&pios_i2c_mag_pressure_adapter_id, &pios_i2c_mag_pressure_adapter_cfg)) {
PIOS_DEBUG_Assert(0);
}
PIOS_DELAY_WaitmS(50);
#if defined(PIOS_INCLUDE_ADC)
PIOS_ADC_Init(&pios_adc_cfg);
#endif
#if defined(PIOS_INCLUDE_MPU6000)
PIOS_MPU6000_Init(pios_spi_gyro_id, 0, &pios_mpu6000_cfg);
PIOS_MPU6000_CONFIG_Configure();
PIOS_MPU6000_Register();
#endif
#if defined(PIOS_INCLUDE_HMC5X83)
onboard_mag = PIOS_HMC5x83_Init(&pios_hmc5x83_cfg, pios_i2c_mag_pressure_adapter_id, 0);
PIOS_HMC5x83_Register(onboard_mag);
#endif
#if defined(PIOS_INCLUDE_MS5611)
PIOS_MS5611_Init(&pios_ms5611_cfg, pios_i2c_mag_pressure_adapter_id);
PIOS_MS5611_Register();
#endif
#ifdef PIOS_INCLUDE_WS2811
#include <pios_ws2811.h>
HwSettingsWS2811LED_OutOptions ws2811_pin_settings;
HwSettingsWS2811LED_OutGet(&ws2811_pin_settings);
if (ws2811_pin_settings != HWSETTINGS_WS2811LED_OUT_DISABLED && ws2811_pin_settings < NELEMENTS(pios_ws2811_pin_cfg)) {
PIOS_WS2811_Init(&pios_ws2811_cfg, &pios_ws2811_pin_cfg[ws2811_pin_settings]);
}
#endif // PIOS_INCLUDE_WS2811
}
