void sioWrite8(unsigned char value) {
#ifdef PAD_LOG
PAD_LOG("sio write8 %x\n", value);
#endif
switch (padst) {
case 1: SIO_INT();
if ((value&0x40) == 0x40) {
padst = 2; parp = 1;
if (!Config.UseNet) {
switch (CtrlReg&0x2002) {
case 0x0002:
buf[parp] = PAD1_poll(value);
break;
case 0x2002:
buf[parp] = PAD2_poll(value);
break;
}
}/* else {
// SysPrintf("%x: %x, %x, %x, %x\n", CtrlReg&0x2002, buf[2], buf[3], buf[4], buf[5]);
}*/
if (!(buf[parp] & 0x0f)) {
bufcount = 2 + 32;
} else {
bufcount = 2 + (buf[parp] & 0x0f) * 2;
}
if (buf[parp] == 0x41) {
switch (value) {
case 0x43:
buf[1] = 0x43;
break;
case 0x45:
buf[1] = 0xf3;
break;
}
}
}
else padst = 0;
return;
case 2:
parp++;
/* if (buf[1] == 0x45) {
buf[parp] = 0;
SIO_INT();
return;
}*/
if (!Config.UseNet) {
switch (CtrlReg&0x2002) {
case 0x0002: buf[parp] = PAD1_poll(value); break;
case 0x2002: buf[parp] = PAD2_poll(value); break;
}
}
if (parp == bufcount) { padst = 0; return; }
SIO_INT();
return;
}
switch (mcdst) {
case 1:
SIO_INT();
if (rdwr) { parp++; return; }
parp = 1;
switch (value) {
case 0x52: rdwr = 1; break;
case 0x57: rdwr = 2; break;
default: mcdst = 0;
}
return;
case 2: // address H
SIO_INT();
adrH = value;
*buf = 0;
parp = 0;
bufcount = 1;
mcdst = 3;
return;
case 3: // address L
SIO_INT();
adrL = value;
*buf = adrH;
parp = 0;
bufcount = 1;
mcdst = 4;
return;
case 4:
SIO_INT();
parp = 0;
switch (rdwr) {
case 1: // read
buf[0] = 0x5c;
buf[1] = 0x5d;
buf[2] = adrH;
buf[3] = adrL;
switch (CtrlReg&0x2002) {
case 0x0002:
memcpy(&buf[4], Mcd1Data + (adrL | (adrH << 8)) * 128, 128);
break;
case 0x2002:
memcpy(&buf[4], Mcd2Data + (adrL | (adrH << 8)) * 128, 128);
break;
}
{
char xor = 0;
int i;
for (i=2;i<128+4;i++)
xor^=buf[i];
buf[132] = xor;
}
buf[133] = 0x47;
bufcount = 133;
break;
case 2: // write
buf[0] = adrL;
buf[1] = value;
buf[129] = 0x5c;
buf[130] = 0x5d;
buf[131] = 0x47;
bufcount = 131;
break;
}
mcdst = 5;
return;
case 5:
parp++;
if (rdwr == 2) {
if (parp < 128) buf[parp+1] = value;
}
SIO_INT();
return;
}
switch (value) {
case 0x01: // start pad
StatReg |= RX_RDY; // Transfer is Ready
if (!Config.UseNet) {
switch (CtrlReg&0x2002) {
case 0x0002: buf[0] = PAD1_startPoll(1); break;
case 0x2002: buf[0] = PAD2_startPoll(2); break;
}
} else {
if ((CtrlReg & 0x2002) == 0x0002) {
int i, j;
PAD1_startPoll(1);
buf[0] = 0;
buf[1] = PAD1_poll(0x42);
if (!(buf[1] & 0x0f)) {
bufcount = 32;
} else {
bufcount = (buf[1] & 0x0f) * 2;
}
buf[2] = PAD1_poll(0);
i = 3;
j = bufcount;
while (j--) {
buf[i++] = PAD1_poll(0);
}
bufcount+= 3;
if (NET_sendPadData(buf, bufcount) == -1)
netError();
if (NET_recvPadData(buf, 1) == -1)
netError();
if (NET_recvPadData(buf+128, 2) == -1)
netError();
} else {
memcpy(buf, buf+128, 32);
}
}
bufcount = 2;
parp = 0;
padst = 1;
SIO_INT();
return;
case 0x81: // start memcard
StatReg |= RX_RDY;
memcpy(buf, cardh, 4);
parp = 0;
bufcount = 3;
mcdst = 1;
rdwr = 0;
SIO_INT();
return;
}
}
void sioWrite8(unsigned char value) {
#ifdef PAD_LOG
PAD_LOG("sio write8 %x (PAR:%x PAD:%x MCDL%x)\n", value, parp, padst, mcdst);
#endif
switch (padst) {
case 1: SIO_INT(SIO_CYCLES);
/*
$41-4F
$41 = Find bits in poll respones
$42 = Polling command
$43 = Config mode (Dual shock?)
$44 = Digital / Analog (after $F3)
$45 = Get status info (Dual shock?)
ID:
$41 = Digital
$73 = Analogue Red LED
$53 = Analogue Green LED
$23 = NegCon
$12 = Mouse
*/
if ((value & 0x40) == 0x40) {
padst = 2; parp = 1;
if (!Config.UseNet) {
switch (CtrlReg & 0x2002) {
case 0x0002:
buf[parp] = PAD1_poll(value);
break;
case 0x2002:
buf[parp] = PAD2_poll(value);
break;
}
}/* else {
// SysPrintf("%x: %x, %x, %x, %x\n", CtrlReg&0x2002, buf[2], buf[3], buf[4], buf[5]);
}*/
if (!(buf[parp] & 0x0f)) {
bufcount = 2 + 32;
} else {
bufcount = 2 + (buf[parp] & 0x0f) * 2;
}
// Digital / Dual Shock Controller
if (buf[parp] == 0x41) {
switch (value) {
// enter config mode
case 0x43:
buf[1] = 0x43;
break;
// get status
case 0x45:
buf[1] = 0xf3;
break;
}
}
// NegCon - Wipeout 3
if( buf[parp] == 0x23 ) {
switch (value) {
// enter config mode
case 0x43:
buf[1] = 0x79;
break;
// get status
case 0x45:
buf[1] = 0xf3;
break;
}
}
}
else padst = 0;
return;
case 2:
parp++;
/* if (buf[1] == 0x45) {
buf[parp] = 0;
SIO_INT(SIO_CYCLES);
return;
}*/
if (!Config.UseNet) {
switch (CtrlReg & 0x2002) {
case 0x0002: buf[parp] = PAD1_poll(value); break;
case 0x2002: buf[parp] = PAD2_poll(value); break;
}
}
if (parp == bufcount) { padst = 0; return; }
SIO_INT(SIO_CYCLES);
return;
}
switch (mcdst) {
case 1:
SIO_INT(SIO_CYCLES);
if (rdwr) { parp++; return; }
parp = 1;
switch (value) {
case 0x52: rdwr = 1; break;
case 0x57: rdwr = 2; break;
default: mcdst = 0;
}
return;
case 2: // address H
SIO_INT(SIO_CYCLES);
adrH = value;
*buf = 0;
parp = 0;
bufcount = 1;
mcdst = 3;
return;
case 3: // address L
SIO_INT(SIO_CYCLES);
adrL = value;
*buf = adrH;
parp = 0;
bufcount = 1;
mcdst = 4;
return;
case 4:
SIO_INT(SIO_CYCLES);
parp = 0;
switch (rdwr) {
case 1: // read
buf[0] = 0x5c;
buf[1] = 0x5d;
buf[2] = adrH;
buf[3] = adrL;
switch (CtrlReg & 0x2002) {
case 0x0002:
memcpy(&buf[4], Mcd1Data + (adrL | (adrH << 8)) * 128, 128);
break;
case 0x2002:
memcpy(&buf[4], Mcd2Data + (adrL | (adrH << 8)) * 128, 128);
break;
}
{
char xorsum = 0;
int i;
for (i = 2; i < 128 + 4; i++)
xorsum ^= buf[i];
buf[132] = xorsum;
}
buf[133] = 0x47;
bufcount = 133;
break;
case 2: // write
buf[0] = adrL;
buf[1] = value;
buf[129] = 0x5c;
buf[130] = 0x5d;
buf[131] = 0x47;
bufcount = 131;
cardh[1] &= ~MCDST_CHANGED;
break;
}
mcdst = 5;
return;
case 5:
parp++;
if (rdwr == 2) {
if (parp < 128) buf[parp + 1] = value;
}
SIO_INT(SIO_CYCLES);
return;
}
/*
GameShark CDX
ae - be - ef - 04 + [00]
ae - be - ef - 01 + 00 + [00] * $1000
ae - be - ef - 01 + 42 + [00] * $1000
ae - be - ef - 03 + 01,01,1f,e3,85,ae,d1,28 + [00] * 4
*/
switch (gsdonglest) {
// main command loop
case 1:
SIO_INT( SIO_CYCLES );
// GS CDX
// - unknown output
// reset device when fail?
if( value == 0xae )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
}
// GS CDX
else if( value == 0xbe )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
buf[0] = reverse_8( 0xde );
}
// GS CDX
else if( value == 0xef )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
buf[0] = reverse_8( 0xad );
}
// GS CDX [1 in + $1000 out + $1 out]
else if( value == 0x01 )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
// $00 = 0000 0000
// - (reverse) 0000 0000
buf[0] = 0x00;
gsdonglest = 2;
}
// GS CDX [1 in + $1000 in + $1 out]
else if( value == 0x02 )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
// $00 = 0000 0000
// - (reverse) 0000 0000
buf[0] = 0x00;
gsdonglest = 3;
}
// GS CDX [8 in, 4 out]
else if( value == 0x03 )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
// $00 = 0000 0000
// - (reverse) 0000 0000
buf[0] = 0x00;
gsdonglest = 4;
}
// GS CDX [out 1]
else if( value == 0x04 )
{
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
// $00 = 0000 0000
// - (reverse) 0000 0000
buf[0] = 0x00;
gsdonglest = 5;
}
else
{
// ERROR!!
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
buf[0] = 0xff;
gsdonglest = 0;
}
return;
// be - ef - 01
case 2: {
unsigned char checksum;
unsigned int lcv;
SIO_INT( SIO_CYCLES );
StatReg |= RX_RDY;
// read 1 byte
DongleBank = buf[ 0 ];
// write data + checksum
checksum = 0;
for( lcv = 0; lcv < 0x1000; lcv++ )
{
unsigned char data;
data = DongleData[ DongleBank * 0x1000 + lcv ];
buf[ lcv+1 ] = reverse_8( data );
checksum += data;
}
parp = 0;
bufcount = 0x1001;
buf[ 0x1001 ] = reverse_8( checksum );
gsdonglest = 255;
return;
}
// be - ef - 02
case 3:
SIO_INT( SIO_CYCLES );
StatReg |= RX_RDY;
// command start
if( parp < 0x1000+1 )
{
// read 1 byte
buf[ parp ] = value;
parp++;
}
if( parp == 0x1001 )
{
unsigned char checksum;
unsigned int lcv;
DongleBank = buf[0];
memcpy( DongleData + DongleBank * 0x1000, buf+1, 0x1000 );
// save to file
SaveDongle( "memcards/CDX_Dongle.bin" );
// write 8-bit checksum
checksum = 0;
for( lcv = 1; lcv < 0x1001; lcv++ )
{
checksum += buf[ lcv ];
}
parp = 0;
bufcount = 1;
buf[1] = reverse_8( checksum );
// flush result
gsdonglest = 255;
}
return;
// be - ef - 03
case 4:
SIO_INT( SIO_CYCLES );
StatReg |= RX_RDY;
// command start
if( parp < 8 )
{
// read 2 (?,?) + 4 (DATA?) + 2 (CRC?)
buf[ parp ] = value;
parp++;
}
if( parp == 8 )
{
// now write 4 bytes via -FOUR- $00 writes
parp = 8;
bufcount = 12;
// TODO: Solve CDX algorithm
// GS CDX [magic key]
if( buf[2] == 0x12 && buf[3] == 0x34 &&
buf[4] == 0x56 && buf[5] == 0x78 )
{
buf[9] = reverse_8( 0x3e );
buf[10] = reverse_8( 0xa0 );
buf[11] = reverse_8( 0x40 );
buf[12] = reverse_8( 0x29 );
}
// GS CDX [address key #2 = 6ec]
else if( buf[2] == 0x1f && buf[3] == 0xe3 &&
buf[4] == 0x45 && buf[5] == 0x60 )
{
buf[9] = reverse_8( 0xee );
buf[10] = reverse_8( 0xdd );
buf[11] = reverse_8( 0x71 );
buf[12] = reverse_8( 0xa8 );
}
// GS CDX [address key #3 = ???]
else if( buf[2] == 0x1f && buf[3] == 0xe3 &&
buf[4] == 0x72 && buf[5] == 0xe3 )
{
// unsolved!!
// Used here: 80090348 / 80090498
// dummy value - MSB
buf[9] = reverse_8( 0xfa );
buf[10] = reverse_8( 0xde );
buf[11] = reverse_8( 0x21 );
buf[12] = reverse_8( 0x97 );
}
// GS CDX [address key #4 = a00]
else if( buf[2] == 0x1f && buf[3] == 0xe3 &&
buf[4] == 0x85 && buf[5] == 0xae )
{
buf[9] = reverse_8( 0xee );
buf[10] = reverse_8( 0xdd );
buf[11] = reverse_8( 0x7d );
buf[12] = reverse_8( 0x44 );
}
// GS CDX [address key #5 = 9ec]
else if( buf[2] == 0x17 && buf[3] == 0xe3 &&
buf[4] == 0xb5 && buf[5] == 0x60 )
{
buf[9] = reverse_8( 0xee );
buf[10] = reverse_8( 0xdd );
buf[11] = reverse_8( 0x7e );
buf[12] = reverse_8( 0xa8 );
}
else
{
// dummy value - MSB
buf[9] = reverse_8( 0xfa );
buf[10] = reverse_8( 0xde );
buf[11] = reverse_8( 0x21 );
buf[12] = reverse_8( 0x97 );
}
// flush bytes -> done
gsdonglest = 255;
}
return;
// be - ef - 04
case 5:
if( value == 0x00 )
{
SIO_INT( SIO_CYCLES );
StatReg |= RX_RDY;
// read 1 byte
parp = 0;
bufcount = parp;
// size of dongle card?
buf[ 0 ] = reverse_8( DONGLE_SIZE / 0x1000 );
// done already
gsdonglest = 0;
}
return;
// flush bytes -> done
case 255:
if( value == 0x00 )
{
//SIO_INT( SIO_CYCLES );
SIO_INT(1);
StatReg |= RX_RDY;
parp++;
if( parp == bufcount )
{
gsdonglest = 0;
#ifdef GSDONGLE_LOG
PAD_LOG("(gameshark dongle) DONE!!\n" );
#endif
}
}
else
{
// ERROR!!
StatReg |= RX_RDY;
parp = 0;
bufcount = parp;
buf[0] = 0xff;
gsdonglest = 0;
}
return;
}
switch (value) {
case 0x01: // start pad
StatReg |= RX_RDY; // Transfer is Ready
if (!Config.UseNet) {
switch (CtrlReg & 0x2002) {
case 0x0002: buf[0] = PAD1_startPoll(1); break;
case 0x2002: buf[0] = PAD2_startPoll(2); break;
}
} else {
if ((CtrlReg & 0x2002) == 0x0002) {
int i, j;
PAD1_startPoll(1);
buf[0] = 0;
buf[1] = PAD1_poll(0x42);
if (!(buf[1] & 0x0f)) {
bufcount = 32;
} else {
bufcount = (buf[1] & 0x0f) * 2;
}
buf[2] = PAD1_poll(0);
i = 3;
j = bufcount;
while (j--) {
buf[i++] = PAD1_poll(0);
}
bufcount+= 3;
if (NET_sendPadData(buf, bufcount) == -1)
netError();
if (NET_recvPadData(buf, 1) == -1)
netError();
if (NET_recvPadData(buf + 128, 2) == -1)
netError();
} else {
memcpy(buf, buf + 128, 32);
}
}
bufcount = 2;
parp = 0;
padst = 1;
SIO_INT(SIO_CYCLES);
return;
case 0x81: // start memcard
//case 0x82: case 0x83: case 0x84: // Multitap memcard access
StatReg |= RX_RDY;
// Chronicles of the Sword - no memcard = password options
if( Config.NoMemcard || ((strlen(Config.Mcd1) <=0) && (strlen(Config.Mcd2) <=0)) ) {
memset(buf, 0x00, 4);
} else {
memcpy(buf, cardh, 4);
}
parp = 0;
bufcount = 3;
mcdst = 1;
rdwr = 0;
SIO_INT(SIO_CYCLES);
return;
case 0xae: // GameShark CDX - start dongle
StatReg |= RX_RDY;
gsdonglest = 1;
parp = 0;
bufcount = parp;
if( !DongleInit )
{
LoadDongle( "memcards/CDX_Dongle.bin" );
DongleInit = 1;
}
SIO_INT( SIO_CYCLES );
return;
default: // no hardware found
StatReg |= RX_RDY;
return;
}
}