/*-------------------------------------------------------------------------*
* Function: GenericBulkBulkIn
*-------------------------------------------------------------------------*
* Description:
* The PC is requesting data to be sent back to it. Pull data
* output of the fifo and send it back up to the maximum size
* packet.
* Inputs:
* TUInt8 aEndpoint -- Endpoint with interrupt
* T_USBEndpointStatus aStatus -- Current status of this endpoint
*-------------------------------------------------------------------------*/
void GenericBulkBulkIn(
void *aWorkspace,
TUInt8 aEndpoint,
T_USBEndpointStatus aStatus)
{
TInt16 i, length;
TUInt8 c;
PARAM_NOT_USED(aWorkspace);
PARAM_NOT_USED(aStatus);
// Pull out data up to the maximum size of a packet
memset(G_GenBulkBuffer, 0xFF, sizeof(G_GenBulkBuffer));
for (i=0; i<(GENERIC_BULK_MAX_PACKET_SIZE-1); i++) {
// Only process if we have data
if (UEZQueueReceive(G_GenBulkFifoOut, &G_GenBulkBuffer[i+1], 0) != UEZ_ERROR_NONE)
break;
}
length = i;
G_GenBulkBuffer[0] = length;
// Send what we have back (first byte is the length of the rest of the bytes)
(*G_ghDevice)->Write(G_ghDevice, aEndpoint, G_GenBulkBuffer, sizeof(G_GenBulkBuffer));
// Check to see if there is more in the queue and if not
// report we are empty (if we have a callback)
if (G_callbacks.iGenBulkEmptyOutput) {
if (UEZQueuePeek(G_GenBulkFifoOut, &c, 0) == UEZ_ERROR_TIMEOUT) {
G_callbacks.iGenBulkEmptyOutput(G_callbacks.iCallbackWorkspace);
}
}
}
/*---------------------------------------------------------------------------*
* Routine: Network_lwIP_Scan
*---------------------------------------------------------------------------*
* Description:
* Start a scan and setup a callback routine for receiving events.
* Inputs:
* void *aWorkspace -- Workspace
* T_uezNetworkScanCallback *aCallback -- Routine to call when a scan is
* found or the scan is complete
* void *aCallbackWorkspace -- Workspace to use with the callback
* char *aScanSSID -- ID to scan under (null string if none)
* TUInt32 aTimeout -- Total time in ms to attempt scan before timing out.
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError Network_lwIP_Scan(
void *aWorkspace,
TUInt32 aChannelNumber,
const char *aScanSSID,
T_uezNetworkScanCallback aCallback,
void *aCallbackWorkspace,
TUInt32 aTimeout)
{
T_Network_lwIP_Workspace *p = (T_Network_lwIP_Workspace *)aWorkspace;
T_uezError error = UEZ_ERROR_NONE;
T_uezNetworkInfo scanInfo;
PARAM_NOT_USED(aCallback);
PARAM_NOT_USED(aCallbackWorkspace);
// Doing a scan is an exclusive command. Nothing else can be
// processing.
UEZSemaphoreGrab(p->iSem, UEZ_TIMEOUT_INFINITE);
scanInfo.iRSSILevel = 0;
scanInfo.iSecurityMode = UEZ_NETWORK_SECURITY_MODE_OPEN;
scanInfo.iChannel = 0;
strcpy(scanInfo.iName, "lwIP");
p->iInfo = scanInfo;
p->iScanStatus = UEZ_NETWORK_SCAN_STATUS_COMPLETE;
if (aCallback) {
aCallback(aCallbackWorkspace, &scanInfo);
}
UEZSemaphoreRelease(p->iSem);
return error;
}
/*-------------------------------------------------------------------------*
* Function: GenericBulkBulkOut
*-------------------------------------------------------------------------*
* Description:
* Bulk virtual comm data has come out of the PC. This data
* is put into the fifo.
* Inputs:
* TUInt8 aEndpoint -- Endpoint with interrupt
* T_USBEndpointStatus aStatus -- Current status of this endpoint
*-------------------------------------------------------------------------*/
void GenericBulkBulkOut(
void *aWorkspace,
TUInt8 aEndpoint,
T_USBEndpointStatus aStatus)
{
TInt16 i, length;
PARAM_NOT_USED(aWorkspace);
PARAM_NOT_USED(aStatus);
// Read data from endpoint
length = (*G_ghDevice)->Read(
G_ghDevice,
aEndpoint,
G_GenBulkBuffer,
sizeof(G_GenBulkBuffer));
if (length) {
// Store all data until we are full.
// TBD: If the PC keeps sending us data and our
// buffer is full, we currently have no handshaking
// to handle overflow.
for (i=1; i<=G_GenBulkBuffer[0]; i++) {
// Put in the queue one character at time quickly, until full.
if (UEZQueueSend(G_GenBulkFifoIn, &G_GenBulkBuffer[i], 0) != UEZ_ERROR_NONE)
break;
}
}
// Setup a response
GenericBulkBulkIn(aWorkspace, USB_ENDPOINT_ADDRESS(1, USB_ENDPOINT_ADDRESS_DIR_IN), aStatus);
}
/*---------------------------------------------------------------------------*
* Routine: CalcChecksumTask
*---------------------------------------------------------------------------*
* Description:
* Calculate a checksum in a separate task
* Inputs:
* T_uezTask aMyTask -- This task
* void *aParams -- Passed in parameters
* Outputs:
* TUInt32 -- Returned code
*---------------------------------------------------------------------------*/
void CalcChecksumTask(T_uezTask aMyTask, void *aParams)
{
PARAM_NOT_USED(aMyTask);
PARAM_NOT_USED(aParams);
G_romChecksum = ROMChecksumCalculate();
G_romChecksumCalculated = ETrue;
}
T_uezError Network_lwIP_Leave(void *aWorkspace, TUInt32 aTimeout)
{
PARAM_NOT_USED(aWorkspace);
PARAM_NOT_USED(aTimeout);
// doesn't do anything in this implementation
return UEZ_ERROR_NONE;
}
TUInt32 GenericBulkMonitor(T_uezTask aMyTask, void *aParameters)
{
PARAM_NOT_USED(aParameters);
PARAM_NOT_USED(aMyTask);
// Just constantly process endpoint data
for (;;) {
((*G_ghDevice)->ProcessEndpoints)(G_ghDevice, UEZ_TIMEOUT_INFINITE);
}
}
/*---------------------------------------------------------------------------*
* Routine: Flash_NXP_LPC17xx_40xx_QueryReg
*---------------------------------------------------------------------------*
* Description:
* Query the chip for the given register (word based address).
* Inputs:
* void *aWorkspace -- Workspace
* TUInt32 aReg -- Register to query
* TUInt32 *aValue -- Place to store value returned
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError Flash_NXP_LPC17xx_40xx_QueryReg(
void *aWorkspace,
TUInt32 aReg,
TUInt32 *aValue)
{
T_uezError error = UEZ_ERROR_NONE;
PARAM_NOT_USED(aWorkspace);
PARAM_NOT_USED(aReg);
// Do nothing
*aValue = 0;
return error;
}
/*---------------------------------------------------------------------------*
* Routine: RX62N_DirectDrive_SetBaseAddr
*---------------------------------------------------------------------------*
* Description:
* Changes the address in memory where the LCD controller gets it's
* pixels and if that change should occur synchronously.
* Inputs:
* void *aWorkspace -- LCD Controller's workspace
* TUInt32 aBaseAddress -- New pixel memory base address
* TBool aSync -- Wait for raster?
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError RX62N_DirectDrive_SetBaseAddr(
void *aWorkspace,
TUInt32 aBaseAddress,
TBool aSync)
{
// T_workspace *p = (T_workspace *)aWorkspace;
PARAM_NOT_USED(aWorkspace);
PARAM_NOT_USED(aBaseAddress);
PARAM_NOT_USED(aSync);
// LCD_UPBASE = p->iBaseAddress;
// TBD: Change base address!
return UEZ_ERROR_NONE;
}
/*---------------------------------------------------------------------------*
* Routine: RX62N_RTC_InitializeWorkspace
*---------------------------------------------------------------------------*
* Description:
* Setup the RX62N RTC workspace.
* Inputs:
* void *aW -- Particular RTC workspace
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError RX62N_RTC_InitializeWorkspace(void *aWorkspace)
{
//T_RX62N_RTC_Workspace *p = (T_RX62N_RTC_Workspace *)aWorkspace;
PARAM_NOT_USED(aWorkspace);
return UEZ_ERROR_NONE;
}
BOOL CALLBACK SubstChkCallback(HWND hDlg, UINT uMsg, WPARAM wPar, LPARAM lPar)
{ SEARCHCONFIRMRESULT Result;
static RECT Rect;
static BOOL RectDefined = FALSE;
PARAM_NOT_USED(lPar);
switch (uMsg) {
case WM_INITDIALOG:
if (RectDefined)
SetWindowPos(hDlg, 0, Rect.left, Rect.top, 0, 0,
SWP_NOZORDER | SWP_NOSIZE);
return (TRUE);
case WM_COMMAND:
switch (wPar) {
case IDOK:
Result = ConfirmReplace;
break;
case 100:
Result = ConfirmSkip;
break;
case IDCANCEL:
Result = ConfirmAbort;
break;
}
GetWindowRect(hDlg, &Rect);
RectDefined = TRUE;
EndDialog(hDlg, Result);
return (TRUE);
}
return (FALSE);
}
/*---------------------------------------------------------------------------*
* Routine: ISerialGeneric_TimerCallbackTransmitEmpty
*---------------------------------------------------------------------------*
* Description:
* The transmission buffer is empty (or needs more characters). Pull
* a byte out of the waiting buffer and put into the serial hardware
* output by calling SerialDevice->OutputByte.
* Inputs:
* void *aCallbackWorkspace -- Pointer to T_RS485_Generic_Timer_Workspace
*---------------------------------------------------------------------------*/
static void ISerialGeneric_TimerCallbackTransmitEmpty(
void *aCallbackWorkspace,
TUInt32 aNumBytesAvailable)
{
T_RS485_Generic_Timer_Workspace *p =
(T_RS485_Generic_Timer_Workspace *)aCallbackWorkspace;
TUInt8 c;
PARAM_NOT_USED(aNumBytesAvailable);
// Only send one byte at a time because we have greater control
// over the timing (the LPC2478 takes 1 character minus 1 stop bit to process
// this many characters
// Output a byte to the buffer
if (_isr_UEZQueueReceive(p->iQueueSend, &c) == UEZ_ERROR_NONE) {
// Got data, send it
(*p->iSerial)->OutputByte((T_halWorkspace *)p->iSerial, c);
} else {
// No more data to send
p->iTxBusy = EFalse;
// Set the time it takes until we get a match
(*p->iTimer)->SetMatchRegister(p->iTimer, 0,
p->iReleaseTimeCPUCycles, ETrue, EFalse, EFalse);
// Reset and start the counter
(*p->iTimer)->Reset(p->iTimer);
(*p->iTimer)->Enable(p->iTimer);
}
}
/*---------------------------------------------------------------------------*
* Routine: RX62N_RTC_Configure
*---------------------------------------------------------------------------*
* Description:
* Configure for internal or external clock and turn on.
* Inputs:
* void *aW -- RTC workspace
* TBool aIsExternalClock -- Internal or external clock config.
* TUInt16 aPrescaleInteger -- Prescalar integer (13-bit) when
* internal config
* TUInt16 aPrescaleFraction -- Prescalar fraction (15-bit) when
* internal
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError RX62N_RTC_Configure(void *aWorkspace)
{
//T_RX62N_RTC_Workspace *p = (T_RX62N_RTC_Workspace *)aWorkspace;
PARAM_NOT_USED(aWorkspace);
// Go ahead and make clock run (regardless of the time)
RTC.RCR2.BIT.START = 1;
return UEZ_ERROR_NONE;
}
/*---------------------------------------------------------------------------*
* Routine: UEZGUITestTextLine
*---------------------------------------------------------------------------*
* Description:
* Show a line of text in the test area.
* Inputs:
* T_testData *aData -- Current test state
* TUInt16 aLine -- Line of result data (0=top, 1=next down, etc.)
* const char *aText -- Text to show
*---------------------------------------------------------------------------*/
void UEZGUITestTextLine(T_testData *aData, TUInt16 aLine, const char *aText)
{
void *aWorkspace = aData->iPrivateData;
// Just output the text regardless of the line offset requested
PARAM_NOT_USED(aLine);
if (G_verbose) {
FDICmdSendString(aWorkspace, aText);
FDICmdSendString(aWorkspace, "\n");
}
}
/*-------------------------------------------------------------------------*
* Function: GenericBulkInterruptIn
*-------------------------------------------------------------------------*
* Description:
* A USB interrupt has polled. Respond with a notification about
* the state of the serial lines.
* NOTE: Currently this does not seem to work!
* Inputs:
* TUInt8 aEndpoint -- Endpoint with interrupt
* T_USBEndpointStatus aStatus -- Current status of this endpoint
*-------------------------------------------------------------------------*/
void GenericBulkInterruptIn(
void *aWorkspace,
TUInt8 aEndpoint,
T_USBEndpointStatus aStatus)
{
// Do nothing
PARAM_NOT_USED(aStatus);
PARAM_NOT_USED(aWorkspace);
G_GenBulkBuffer[0] = 0xA1;
G_GenBulkBuffer[1] = 0x20; // SERIAL_STATE
G_GenBulkBuffer[2] = 0x00; // wValue
G_GenBulkBuffer[3] = 0x00;
G_GenBulkBuffer[4] = 0x01; // Interface
G_GenBulkBuffer[5] = 0x00;
G_GenBulkBuffer[6] = 0x02; // wLength
G_GenBulkBuffer[7] = 0x00;
G_GenBulkBuffer[8] = 0x00; // UART State
G_GenBulkBuffer[9] = 0x00;
((*G_ghDevice)->Write)(G_ghDevice, aEndpoint, G_GenBulkBuffer, 10);
}
/*---------------------------------------------------------------------------*
* Routine: RX63N_DirectDrive_SetBaseAddr
*---------------------------------------------------------------------------*
* Description:
* Changes the address in memory where the LCD controller gets it's
* pixels and if that change should occur synchronously.
* Inputs:
* void *aWorkspace -- LCD Controller's workspace
* TUInt32 aBaseAddress -- New pixel memory base address
* TBool aSync -- Wait for raster?
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError RX63N_DirectDrive_SetBaseAddr(
void *aWorkspace,
TUInt32 aBaseAddress,
TBool aSync)
{
T_workspace *p = (T_workspace *)aWorkspace;
PARAM_NOT_USED(aSync);
p->iBaseAddress = aBaseAddress;
LCDSetLineSource(0, DD_FRAME_HEIGHT, (pixel *)p->iBaseAddress, DD_FRAME_WIDTH);
return UEZ_ERROR_NONE;
}
T_uezError Network_lwIP_SocketWrite(
void *aWorkspace,
T_uezNetworkSocket aSocket,
void *aData,
TUInt32 aNumBytes,
TBool aFlush,
TUInt32 aTimeout)
{
T_Network_lwIP_Workspace *p = (T_Network_lwIP_Workspace *)aWorkspace;
T_uezError error = UEZ_ERROR_UNKNOWN;
T_lwIPSocket *p_socket = p->iSockets + aSocket;
TUInt16 numWrite;
PARAM_NOT_USED(aTimeout);
if ((aSocket == 0) || (aSocket > NETWORK_LWIP_NUM_SOCKETS))
return UEZ_ERROR_HANDLE_INVALID;
UEZSemaphoreGrab(p->iSem, UEZ_TIMEOUT_INFINITE);
if (p_socket->iState == SOCKET_STATE_FREE) {
error = UEZ_ERROR_HANDLE_INVALID;
} else if ((p_socket->iFlags & SOCKET_FLAG_CONNECTED) == 0) {
error = UEZ_ERROR_NOT_OPEN;
} else {
while (aNumBytes) {
// Send data up to a 16-bit value
if (aNumBytes > 0xFFFF)
numWrite = 0xFFFF;
else
numWrite = (TUInt16)aNumBytes;
aNumBytes -= numWrite;
// Clean up any previous timeout errors
if (p_socket->iNetconn->err == ERR_TIMEOUT)
p_socket->iNetconn->err = ERR_OK;
// Write out this segment (noting if there is data past this one)
error
= IConvertErrorCode(netconn_write(p_socket->iNetconn, aData,
numWrite, NETCONN_COPY | ((aFlush) ? 0
: NETCONN_MORE)));
// Stop on any errors
if (error != UEZ_ERROR_NONE)
break;
aData = (void *)(((char *)aData) + numWrite);
}
}
UEZSemaphoreRelease(p->iSem);
return error;
}
T_uezError Host_SetControlPacketSize(
void *aWorkspace,
TUInt8 aDeviceAddress,
TUInt16 aPacketSize)
{
PARAM_NOT_USED(aWorkspace);
if (aPacketSize > 256)
return UEZ_ERROR_ILLEGAL_PARAMETER;
EDCtrl->Control = (aPacketSize << 16);
return UEZ_ERROR_NONE;
}
static TBool Keypad_NXP_PCA9555_Callback(
void *aCallbackWorkspace,
TUInt32 aChannel)
{
T_Keypad_NXP_I2C_PCA9555_Workspace *p =
(T_Keypad_NXP_I2C_PCA9555_Workspace *)aCallbackWorkspace;
PARAM_NOT_USED(aChannel);
// Notify the thread we got one ready by releasing the semaphore
// that is holding the monitoring thread
_isr_UEZSemaphoreRelease(p->iReady);
// Don't reset the interrupt, we'll do it when we are ready in the task
return EFalse;
}
/*-------------------------------------------------------------------------*
* Function: GenericBulkHandleClassRequest
*-------------------------------------------------------------------------*
* Description:
* Handle CDC class requests that are required for the virtual
* COMM port. Notify the system each time the baud rate is changed.
* Inputs:
* T_USBSetupPacket *aSetup -- Setup packet with cmd
* TUInt16 *aLength -- Pointer to length of return data
* TUInt8 **aData -- Pointer to start of return data
* Outputs:
* TBool -- ETrue if handled, else EFalse.
*-------------------------------------------------------------------------*/
TBool GenericBulkHandleClassRequest(
void *aWorkspace,
T_USBSetupPacket *aSetup,
TUInt16 *aLength,
TUInt8 **aData)
{
PARAM_NOT_USED(aWorkspace);
switch (aSetup->iRequest) {
default:
return EFalse;
}
#if (COMPILER_TYPE!=IAR)
return ETrue;
#endif
}
/*---------------------------------------------------------------------------*
* Routine: Flash_NXP_LPC17xx_40xx_GetChipInfo
*---------------------------------------------------------------------------*
* Description:
* Get information about the chip size
* Inputs:
* void *aW -- Workspace
* T_FlashChipInfo *aInfo -- Pointer to structure to receive info
* Outputs:
* T_uezError -- Error code. Returns UEZ_ERROR_NOT_FOUND
* if flash information is not found
* (in this case, missing QRY header)
*---------------------------------------------------------------------------*/
T_uezError Flash_NXP_LPC17xx_40xx_GetChipInfo(
void *aWorkspace,
T_FlashChipInfo *aInfo)
{
PARAM_NOT_USED(aWorkspace);
// Manually fill in the structure with a list
// of 16x 4K blocks followed by 14x 16K blocks
aInfo->iBitWidth = 8;
aInfo->iNumBytesHigh = 0;
aInfo->iNumBytesLow = 512*1024;
aInfo->iNumRegions = 2;
aInfo->iRegions[0].iNumEraseBlocks = 16;
aInfo->iRegions[0].iSizeEraseBlock = 4*1024;
aInfo->iRegions[1].iNumEraseBlocks = 14;
aInfo->iRegions[1].iSizeEraseBlock = 32*1024;
return UEZ_ERROR_NONE;
}
/*---------------------------------------------------------------------------*
* Routine: ExternalInterrupt_Renesas_RX62N_ConfigurePinSet
*---------------------------------------------------------------------------*
* Description:
* Configure the pin to be on IRQn-A (EFalse) or IRQn-B (ETrue).
* Inputs:
* void *aWorkspace -- Workspace
* TUInt32 aChannel -- EINT channel (0 to 15)
* TBool aIsPinSetB -- ETrue = IRQn-B, EFalse = IRQn-A
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError ExternalInterrupt_Renesas_RX62N_ConfigurePinSet(
void *aWorkspace,
TUInt32 aChannel,
TBool aIsPinSetB)
{
T_uezError error = UEZ_ERROR_NONE;
PARAM_NOT_USED(aWorkspace);
// Fake loop
while (1) {
// Is this a valid channel?
if (aChannel >= NUM_EXTERNAL_INTERRUPTS) {
error = UEZ_ERROR_OUT_OF_RANGE;
break;
}
G_eintEntries[aChannel].iIsPinSetB = aIsPinSetB;
break;
}
return error;
}
/*---------------------------------------------------------------------------*
* Routine: RX62N_RTC_Set
*---------------------------------------------------------------------------*
* Description:
* Set the current date and time.
* Inputs:
* void *aW -- RTC workspace
* T_uezTimeDate *aTimeDate -- Time and date of the current time
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError RX62N_RTC_Set(void *aWorkspace, const T_uezTimeDate *aTimeDate)
{
//T_RX62N_RTC_Workspace *p = (T_RX62N_RTC_Workspace *)aWorkspace;
PARAM_NOT_USED(aWorkspace);
// Stop RTC (disable and reset)
RTC.RCR2.BIT.START = 0;
RTC.RCR2.BIT.RESET = 1;
// Update RTC registers
RTC.RSECCNT.BYTE = IDecimalToBCD(aTimeDate->iTime.iSecond);
RTC.RMINCNT.BYTE = IDecimalToBCD(aTimeDate->iTime.iMinute);
RTC.RHRCNT.BYTE = IDecimalToBCD(aTimeDate->iTime.iHour);
RTC.RDAYCNT.BYTE = IDecimalToBCD(aTimeDate->iDate.iDay);
RTC.RMONCNT.BYTE = IDecimalToBCD(aTimeDate->iDate.iMonth);
RTC.RYRCNT.WORD = IDecimalToBCD(aTimeDate->iDate.iYear);
// Start RTC with external XTAL
RTC.RCR2.BIT.START = 1;
return UEZ_ERROR_NONE;
}
/*---------------------------------------------------------------------------*
* Routine: UEZGUITestShowResult
*---------------------------------------------------------------------------*
* Description:
* Show a result on the screen and possibly delay
* Inputs:
* T_testData *aData -- Current test state
* TUInt16 aLine -- Line of result data (0=top, 1=next down, etc.)
* TUInt16 aResult -- Result to show as well
* TUInt32 aDelay -- Amount of time to delay to show this
*---------------------------------------------------------------------------*/
void UEZGUITestShowResult(
T_testData *aData,
TUInt16 aLine,
TUInt16 aResult,
TUInt32 aDelay)
{
static const char *textResults[] = {
"In Progress",
"Done",
"PASS",
"FAIL",
"Skip", };
// We got a result. Pass or fail?
void *aWorkspace = aData->iPrivateData;
FDICmdSendString(aWorkspace, textResults[aResult]);
FDICmdSendString(aWorkspace, ": ");
// Don't delay
PARAM_NOT_USED(aDelay);
}
BOOL CALLBACK SearchCallback(HWND hDlg, UINT uMsg, WPARAM wPar, LPARAM lPar)
{ extern BOOL SearchBoxPosition, HexEditTextSide;
extern INT SearchBoxX, SearchBoxY;
static RECT DlgRect;
static BOOL Enabled;
static CHAR CloseString[10];
PARAM_NOT_USED(lPar);
switch (uMsg) {
RECT r;
case WM_INITDIALOG:
GetWindowRect(hDlg, &DlgRect);
GetWindowRect(GetDlgItem(hDlg, IDC_REPLACE), &r);
SetWindowPos(hDlg, 0, SearchBoxX, SearchBoxY,
DlgRect.right - DlgRect.left,
r.top - DlgRect.top,
SearchBoxPosition ? SWP_NOZORDER
: SWP_NOZORDER | SWP_NOMOVE);
SendMessage(hDlg, DM_REPOSITION, 0, 0);
EnableWindow(GetDlgItem(hDlg, IDC_SHOWREPLACE), FALSE);
if (HexInput != (HexEditMode && !HexEditTextSide)) {
HexInput ^= TRUE;
*SearchBuf = '\0';
}
if (SelectCount && (HexInput ? 3 : 1) * SelectCount
< WSIZE(SearchBuf)) {
POSITION SelPos;
INT i, c;
PWSTR p = SearchBuf;
SelPos = SelectStart;
for (i=(INT)SelectCount; i; --i) {
if (HexInput) {
c = ByteAt(&SelPos);
if (Advance(&SelPos, 1) != 1) break;
if (UtfEncoding == 16 && i > 1) {
if (UtfLsbFirst)
c |= ByteAt(&SelPos) << 8;
else c = (c << 8) | ByteAt(&SelPos);
if (Advance(&SelPos, 1) != 1) break;
--i;
}
p += _snwprintf(p, WSIZE(SearchBuf) - (p-SearchBuf),
UtfEncoding == 16 ? L"%04x " : L"%02x ",
c);
} else {
if ((c = CharAt(&SelPos)) == C_CRLF) c = '\r';
else if (!UtfEncoding) c = CharSetToUnicode(c);
if (UtfEncoding == 16) {
if (i > 1) --i;
if (Advance(&SelPos, 2) != 2) break;
} else if (Advance(&SelPos, 1) != 1) break;
*p++ = c;
}
}
if (HexInput) --p;
*p = '\0';
if (*SearchBuf && !ViewOnlyFlag)
EnableWindow(GetDlgItem(hDlg, IDC_SHOWREPLACE), TRUE);
} else {
PWSTR p;
if ((p = ExtractIdentifier(NULL)) != NULL)
wcsncpy(SearchBuf, p, WSIZE(SearchBuf));
}
Enabled = *SearchBuf!='\0';
if (Enabled) {
EnableWindow(GetDlgItem(hDlg, IDOK), TRUE);
SetDlgItemTextW(hDlg, IDC_SEARCHSTRING, SearchBuf);
SendMessage(hDlg, DM_SETDEFID, IDOK, 0L);
} else {
SendMessage(hDlg, DM_SETDEFID, IDCANCEL, 0L);
EnableWindow(GetDlgItem(hDlg, IDOK), FALSE);
}
EnableWindow(GetDlgItem(hDlg, IDC_REPLACESTRING), FALSE);
EnableWindow(GetDlgItem(hDlg, IDC_REPLACE), FALSE);
EnableWindow(GetDlgItem(hDlg, IDC_REPLACEALL), FALSE);
CheckDlgButton(hDlg, *SrchDispBuf=='?' ? IDC_BACKWARD : IDC_FORWARD,
TRUE);
CheckDlgButton(hDlg, IDC_MATCHCASE, !IgnoreCaseFlag);
CheckDlgButton(hDlg, IDC_MAGIC, Magic);
CheckDlgButton(hDlg, IDC_HEXSEARCH, HexInput);
CheckDlgButton(hDlg, IDC_WHOLEWORD, WholeWord);
CheckDlgButton(hDlg, IDC_WRAPSCAN, WrapScanFlag);
LOADSTRING(hInst, 909, CloseString, sizeof(CloseString));
ReplaceOpen = FALSE;
PostMessage(hDlg, WM_COMMAND, 4569, 0); /*for Wine*/
return (TRUE);
case WM_COMMAND:
switch (COMMAND) {
case 4569:
/*Disable/enable again for Wine...*/
EnableWindow(GetDlgItem(hDlg, IDOK), Enabled);
break;
case IDOK:
SearchOk(hDlg);
break;
case IDCANCEL:
if (ReplacingAll) Interrupted = TRUE;
PostMessage(hDlg, WM_CLOSE, 0, 0);
break;
case IDC_SEARCHSTRING:
GetDlgItemTextW(hDlg, IDC_SEARCHSTRING, CommandBuf, 4);
if (Enabled != (*CommandBuf != '\0')) {
if (Enabled ^= TRUE) {
EnableWindow(GetDlgItem(hDlg, IDOK), TRUE);
SendMessage(hDlg, DM_SETDEFID, IDOK, 0L);
} else {
SendMessage(hDlg, DM_SETDEFID, IDCANCEL, 0L);
EnableWindow(GetDlgItem(hDlg, IDOK), FALSE);
}
if (ReplaceOpen) {
EnableWindow(GetDlgItem(hDlg,IDC_REPLACE), Enabled);
EnableWindow(GetDlgItem(hDlg,IDC_REPLACEALL),Enabled);
}
}
break;
case IDC_SHOWREPLACE:
EnableWindow(GetDlgItem(hDlg, IDC_REPLACESTRING), TRUE);
EnableWindow(GetDlgItem(hDlg, IDC_REPLACE), SelectCount!=0);
EnableWindow(GetDlgItem(hDlg, IDC_REPLACEALL), TRUE);
SetWindowPos(hDlg, 0,0,0, DlgRect.right-DlgRect.left,
DlgRect.bottom-DlgRect.top,
SWP_NOZORDER | SWP_NOMOVE);
SendMessage(hDlg, DM_REPOSITION, 0, 0);
SetFocus(GetDlgItem(hDlg, IDC_REPLACESTRING));
SendMessage(hDlg, DM_SETDEFID, IDC_REPLACE, 0L);
EnableWindow(GetDlgItem(hDlg, IDC_SHOWREPLACE), FALSE);
ReplaceOpen = TRUE;
break;
case IDC_REPLACE:
ReplaceSearched(hDlg);
SetDlgItemText(hDlg, IDCANCEL, CloseString);
break;
case IDC_REPLACEALL:
SetupSearchString(hDlg, NULL);
GlobalSubst(hDlg);
SetDlgItemText(hDlg, IDCANCEL, CloseString);
}
return (TRUE);
case WM_MOVE:
case WM_CLOSE:
SearchBoxPosition = TRUE;
GetWindowRect(hDlg, &r);
SearchBoxX = r.left;
SearchBoxY = r.top;
if (uMsg == WM_CLOSE) {
DestroyWindow(hDlg);
hwndSearch = NULL;
}
return (TRUE);
}
return (FALSE);
}
static void AudioPlayerExit(const T_choice *aChoice)
{
G_AudioIsRunning = EFalse;
PARAM_NOT_USED(aChoice);
G_ws->iExit = ETrue;
}
/*---------------------------------------------------------------------------*
* Routine: UEZGUITestRemoveButtons
*---------------------------------------------------------------------------*
* Description:
* Remove options/buttons
* Inputs:
* T_testData *aData -- Current test state
* TUInt16 aButtonTypes -- Type of buttons to remove/hide
*---------------------------------------------------------------------------*/
void UEZGUITestRemoveButtons(T_testData *aData, TUInt16 aButtonTypes)
{
// Do nothing
PARAM_NOT_USED(aData); PARAM_NOT_USED(aButtonTypes);
}
/*---------------------------------------------------------------------------*
* Routine: Network_lwIP_Configure
*---------------------------------------------------------------------------*
* Description:
* Configure the lwIP (if any).
* NOTE: This is a good place for the programming for the MAC address
* Inputs:
* void *aW -- Workspace
*---------------------------------------------------------------------------*/
void Network_lwIP_Configure(void *aWorkspace)
{
PARAM_NOT_USED(aWorkspace);
}
static void SlideshowExit(const T_choice *aChoice)
{
PARAM_NOT_USED(aChoice);
G_ws->iExit = ETrue;
}
/*---------------------------------------------------------------------------*
* Routine: CRC_Generic_Interface_Close
*---------------------------------------------------------------------------*
* Description:
*
* Inputs:
* void *aWorkspace -- Workspace
* Outputs:
* T_uezError -- Error code
*---------------------------------------------------------------------------*/
T_uezError CRC_Generic_Interface_Close(void *aWorkspace)
{
// Doesn't do anything in this implementation
PARAM_NOT_USED(aWorkspace);
return UEZ_ERROR_NONE;
}
static void VideoPlayerSelectExit(const T_choice *aChoice)
{
PARAM_NOT_USED(aChoice);
G_ws->iExit = ETrue;
}
