Ejemplo n.º 1
0
Archivo: nicpci.c Proyecto: ariavie/bcm
/* centralized clkreq control policy */
static void
pcie_clkreq_upd(pcicore_info_t *pi, uint state)
{
	si_t *sih = pi->sih;
	ASSERT(PCIE(sih));

	switch (state) {
	case SI_DOATTACH:
		/* XXX PR42780 WAR: Disable clk req when coming up */
		if (PCIE_ASPM(sih))
			pcie_clkreq((void *)pi, 1, 0);
		break;
	case SI_PCIDOWN:
		if (sih->buscorerev == 6) {	/* turn on serdes PLL down */
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_addr),
			           ~0, 0);
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_data),
			           ~0x40, 0);
		} else if (pi->pcie_pr42767) {
			/* When the driver going down, enable clkreq if PR42767 has been applied.
			 * Also, adjust the state as system could hibernate, so Serdes PLL WAR is
			 * a must before doing this
			 */
			pcie_clkreq((void *)pi, 1, 1);
		}
		break;
	case SI_PCIUP:
		if (sih->buscorerev == 6) {	/* turn off serdes PLL down */
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_addr),
			           ~0, 0);
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_data),
			           ~0x40, 0x40);
		} else if (PCIE_ASPM(sih)) {		/* disable clkreq */
			pcie_clkreq((void *)pi, 1, 0);
		}
		break;
	default:
		ASSERT(0);
		break;
	}
}
Ejemplo n.º 2
0
/* centralized clkreq control policy */
static void
pcie_clkreq_upd(pcicore_info_t *pi, uint state)
{
	si_t *sih = pi->sih;
	ASSERT(PCIE(sih));

	switch (state) {
	case SI_DOATTACH:
		if (PCIE_ASPM(sih))
			pcie_clkreq((void *)pi, 1, 0);
		break;
	case SI_PCIDOWN:
		if (sih->buscorerev == 6) {	/* turn on serdes PLL down */
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_addr),
			           ~0, 0);
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_data),
			           ~0x40, 0);
		} else if (pi->pcie_pr42767) {
			pcie_clkreq((void *)pi, 1, 1);
		}
		break;
	case SI_PCIUP:
		if (sih->buscorerev == 6) {	/* turn off serdes PLL down */
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_addr),
			           ~0, 0);
			si_corereg(sih, SI_CC_IDX, OFFSETOF(chipcregs_t, chipcontrol_data),
			           ~0x40, 0x40);
		} else if (PCIE_ASPM(sih)) {		/* disable clkreq */
			pcie_clkreq((void *)pi, 1, 0);
		}
		break;
	default:
		ASSERT(0);
		break;
	}
}
Ejemplo n.º 3
0
void
pcie_war_ovr_aspm_update(void *pch, uint8 aspm)
{
	pcicore_info_t *pi = (pcicore_info_t *)pch;

	if (!PCIE_ASPM(pi->sih))
		return;

	/* Validate */
	if (aspm > PCIE_ASPM_ENAB)
		return;

	pi->pcie_war_aspm_ovr = aspm;

	/* Update the current state */
	pcie_war_aspm_clkreq(pi);
}
Ejemplo n.º 4
0
Archivo: nicpci.c Proyecto: ariavie/bcm
/* Needs to happen when coming out of 'standby'/'hibernate' */
static void
pcie_war_pci_setup(pcicore_info_t *pi)
{
	si_t *sih = pi->sih;
	osl_t *osh = pi->osh;
	sbpcieregs_t *pcieregs = pi->regs.pcieregs;
	uint32 w;

	/* PR 29224  enable_9715_fix bit in the TLP workaround register should be set */
	if ((sih->buscorerev == 0) || (sih->buscorerev == 1)) {
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG);
		w |= 0x8;
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG, w);
	}

	/* PR 34651 set bit6 to enable pcie-pm power mgmt in DLLP LC Reg, default is off */
	if (sih->buscorerev == 1) {
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_LCREG);
		w |= (0x40);
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w);
	}

	if (sih->buscorerev == 0) {
		/* PR30841 WAR */
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
	} else if (PCIE_ASPM(sih)) {
		/* PR42766 WAR */
		/* Change the L1 threshold for better performance */
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG);
		w &= ~(PCIE_L1THRESHOLDTIME_MASK);
		w |= (PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT);
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w);

		pcie_war_serdes(pi);

		pcie_war_aspm_clkreq(pi);
	} else if (pi->sih->buscorerev == 7)
		pcie_war_noplldown(pi);

	/* Note that the fix is actually in the SROM, that's why this is open-ended */
	if (pi->sih->buscorerev >= 6)
		pcie_misc_config_fixup(pi);
}
Ejemplo n.º 5
0
/* Needs to happen when update to shadow SROM is needed
 *   : Coming out of 'standby'/'hibernate'
 *   : If pcie_war_aspm_ovr state changed
 */
static void
pcie_war_aspm_clkreq(pcicore_info_t *pi)
{
	sbpcieregs_t *pcieregs = pi->regs.pcieregs;
	si_t *sih = pi->sih;
	uint16 val16, *reg16;
	uint32 w;

	if (!PCIE_ASPM(sih))
		return;

	/* bypass this on QT or VSIM */
	if (!ISSIM_ENAB(sih)) {

		reg16 = &pcieregs->sprom[SRSH_ASPM_OFFSET];
		val16 = R_REG(pi->osh, reg16);

		val16 &= ~SRSH_ASPM_ENB;
		if (pi->pcie_war_aspm_ovr == PCIE_ASPM_ENAB)
			val16 |= SRSH_ASPM_ENB;
		else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L1_ENAB)
			val16 |= SRSH_ASPM_L1_ENB;
		else if (pi->pcie_war_aspm_ovr == PCIE_ASPM_L0s_ENAB)
			val16 |= SRSH_ASPM_L0s_ENB;

		W_REG(pi->osh, reg16, val16);

		w = OSL_PCI_READ_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32));
		w &= ~PCIE_ASPM_ENAB;
		w |= pi->pcie_war_aspm_ovr;
		OSL_PCI_WRITE_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32), w);
	}

	reg16 = &pcieregs->sprom[SRSH_CLKREQ_OFFSET_REV5];
	val16 = R_REG(pi->osh, reg16);

	if (pi->pcie_war_aspm_ovr != PCIE_ASPM_DISAB) {
		val16 |= SRSH_CLKREQ_ENB;
		pi->pcie_pr42767 = TRUE;
	} else
		val16 &= ~SRSH_CLKREQ_ENB;

	W_REG(pi->osh, reg16, val16);
}
Ejemplo n.º 6
0
/* centralized clkreq control policy */
static void pcie_clkreq_upd(struct pcicore_info *pi, uint state)
{
	struct si_pub *sih = pi->sih;

	switch (state) {
	case SI_DOATTACH:
		if (PCIE_ASPM(sih))
			pcie_clkreq(pi, 1, 0);
		break;
	case SI_PCIDOWN:
		/* turn on serdes PLL down */
		if (ai_get_buscorerev(sih) == 6) {
			ai_cc_reg(sih,
				  offsetof(struct chipcregs, chipcontrol_addr),
				  ~0, 0);
			ai_cc_reg(sih,
				  offsetof(struct chipcregs, chipcontrol_data),
				  ~0x40, 0);
		} else if (pi->pcie_pr42767) {
Ejemplo n.º 7
0
Archivo: nicpci.c Proyecto: ariavie/bcm
/* Needs to happen when update to shadow SROM is needed
 *   : Coming out of 'standby'/'hibernate'
 *   : If pcie_war_aspm_ovr state changed
 */
static void
pcie_war_aspm_clkreq(pcicore_info_t *pi)
{
	sbpcieregs_t *pcieregs = pi->regs.pcieregs;
	si_t *sih = pi->sih;
	uint16 val16, *reg16;
	uint32 w;

	if (!PCIE_ASPM(sih))
		return;

	/* PR43448 WAR: Enable ASPM in the shadow SROM and Link control */
	/* bypass this on QT or VSIM */
	if (sih->chippkg != HDLSIM_PKG_ID && sih->chippkg != HWSIM_PKG_ID) {

		reg16 = &pcieregs->sprom[SRSH_ASPM_OFFSET];
		val16 = R_REG(pi->osh, reg16);
		if (!pi->pcie_war_aspm_ovr)
			val16 |= SRSH_ASPM_ENB;
		else
			val16 &= ~SRSH_ASPM_ENB;
		W_REG(pi->osh, reg16, val16);

		w = OSL_PCI_READ_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32));
		if (!pi->pcie_war_aspm_ovr)
			w |= PCIE_ASPM_ENAB;
		else
			w &= ~PCIE_ASPM_ENAB;
		OSL_PCI_WRITE_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32), w);
	}

	/* PR42767 WAR: if clockreq is not advertized in SROM, advertize it */
	reg16 = &pcieregs->sprom[SRSH_CLKREQ_OFFSET_REV5];
	val16 = R_REG(pi->osh, reg16);

	if (!pi->pcie_war_aspm_ovr) {
		val16 |= SRSH_CLKREQ_ENB;
		pi->pcie_pr42767 = TRUE;
	} else
		val16 &= ~SRSH_CLKREQ_ENB;

	W_REG(pi->osh, reg16, val16);
}
Ejemplo n.º 8
0
Archivo: nicpci.c Proyecto: ariavie/bcm
/* When the device is going to enter D3 state (or the system is going to enter S3/S4 states */
void
pcicore_sleep(void *pch)
{
	pcicore_info_t *pi = (pcicore_info_t *)pch;
	uint32 w;

	if (!pi || !PCIE_ASPM(pi->sih))
		return;

	/* PR43448: Clear ASPM L1 when going to sleep as while coming out of standby/sleep,
	 * ASPM L1 should not be accidentally enabled before driver has a chance to apply
	 * the WAR
	 */
	w = OSL_PCI_READ_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32));
	w &= ~PCIE_CAP_LCREG_ASPML1;
	OSL_PCI_WRITE_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32), w);

	/* Clear the state for PR42767 to make sure it's applied on the way up */
	pi->pcie_pr42767 = FALSE;
}
Ejemplo n.º 9
0
/* Needs to happen when coming out of 'standby'/'hibernate' */
static void
pcie_war_pci_setup(pcicore_info_t *pi)
{
	si_t *sih = pi->sih;
	osl_t *osh = pi->osh;
	sbpcieregs_t *pcieregs = pi->regs.pcieregs;
	uint32 w;

	if ((sih->buscorerev == 0) || (sih->buscorerev == 1)) {
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG);
		w |= 0x8;
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_TLP_WORKAROUNDSREG, w);
	}

	if (sih->buscorerev == 1) {
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_LCREG);
		w |= (0x40);
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_LCREG, w);
	}

	if (sih->buscorerev == 0) {
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_TIMER1, 0x8128);
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDR, 0x0100);
		pcie_mdiowrite(pi, MDIODATA_DEV_RX, SERDES_RX_CDRBW, 0x1466);
	} else if (PCIE_ASPM(sih)) {
		/* Change the L1 threshold for better performance */
		w = pcie_readreg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG);
		w &= ~(PCIE_L1THRESHOLDTIME_MASK);
		w |= (PCIE_L1THRESHOLD_WARVAL << PCIE_L1THRESHOLDTIME_SHIFT);
		pcie_writereg(osh, pcieregs, PCIE_PCIEREGS, PCIE_DLLP_PMTHRESHREG, w);

		pcie_war_serdes(pi);

		pcie_war_aspm_clkreq(pi);
	} else if (pi->sih->buscorerev == 7)
		pcie_war_noplldown(pi);

	/* Note that the fix is actually in the SROM, that's why this is open-ended */
	if (pi->sih->buscorerev >= 6)
		pcie_misc_config_fixup(pi);
}
Ejemplo n.º 10
0
/* ***** Functions called during driver state changes ***** */
void
BCMATTACHFN(pcicore_attach)(void *pch, char *pvars, int state)
{
	pcicore_info_t *pi = (pcicore_info_t *)pch;
	si_t *sih = pi->sih;

	if (PCIE_ASPM(sih)) {
		if (((sih->boardvendor == VENDOR_APPLE) &&
		     ((uint8)getintvar(pvars, "sromrev") == 4) &&
		     ((uint8)getintvar(pvars, "boardrev") <= 0x71)) ||
		    ((uint32)getintvar(pvars, "boardflags2") & BFL2_PCIEWAR_OVR)) {
			pi->pcie_war_aspm_ovr = PCIE_ASPM_DISAB;
		} else {
			pi->pcie_war_aspm_ovr = PCIE_ASPM_ENAB;
		}
	}

	pi->pcie_reqsize = PCIE_CAP_DEVCTRL_MRRS_128B;
	if (BCM4331_CHIP_ID == CHIPID(sih->chip))
	    pi->pcie_reqsize = PCIE_CAP_DEVCTRL_MRRS_512B;

	/* These need to happen in this order only */
	pcie_war_polarity(pi);

	pcie_war_serdes(pi);

	pcie_war_aspm_clkreq(pi);

	pcie_clkreq_upd(pi, state);

	/* Alter default TX drive strength setting */
	if (sih->boardvendor == VENDOR_APPLE) {
		if (sih->boardtype == 0x8d)
			/* change the TX drive strength to max */
			pcicore_pcieserdesreg(pch, MDIO_DEV_TXCTRL0, 0x18, 0xff, 0x7f);
		else if (BCM4331_CHIP_ID == CHIPID(sih->chip))
			/* change the drive strength for X19b & X28 to 700mv */
			pcicore_pcieserdesreg(pch, MDIO_DEV_TXCTRL0, 0x18, 0xff, 0x70);
	}
}
Ejemplo n.º 11
0
/* When the device is going to enter D3 state (or the system is going to enter S3/S4 states */
void
pcicore_sleep(void *pch)
{
	pcicore_info_t *pi = (pcicore_info_t *)pch;
	uint32 w;

	if (!pi || !PCIE(pi->sih))
		return;

	pcie_power_save_upd(pi, FALSE);


	if (!PCIE_ASPM(pi->sih))
		return;


	w = OSL_PCI_READ_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32));
	w &= ~PCIE_CAP_LCREG_ASPML1;
	OSL_PCI_WRITE_CONFIG(pi->osh, pi->pciecap_lcreg_offset, sizeof(uint32), w);


	pi->pcie_pr42767 = FALSE;
}