Ejemplo n.º 1
0
Archivo: prep.c Proyecto: DrCheadar/orp
/* PowerPC PREP hardware initialisation */
static void ppc_prep_init(MachineState *machine)
{
    ram_addr_t ram_size = machine->ram_size;
    const char *cpu_model = machine->cpu_model;
    const char *kernel_filename = machine->kernel_filename;
    const char *kernel_cmdline = machine->kernel_cmdline;
    const char *initrd_filename = machine->initrd_filename;
    const char *boot_device = machine->boot_order;
    MemoryRegion *sysmem = get_system_memory();
    PowerPCCPU *cpu = NULL;
    CPUPPCState *env = NULL;
    nvram_t nvram;
    M48t59State *m48t59;
#if 0
    MemoryRegion *xcsr = g_new(MemoryRegion, 1);
#endif
    int linux_boot, i, nb_nics1;
    MemoryRegion *ram = g_new(MemoryRegion, 1);
    uint32_t kernel_base, initrd_base;
    long kernel_size, initrd_size;
    DeviceState *dev;
    PCIHostState *pcihost;
    PCIBus *pci_bus;
    PCIDevice *pci;
    ISABus *isa_bus;
    ISADevice *isa;
    qemu_irq *cpu_exit_irq;
    int ppc_boot_device;
    DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];

    sysctrl = g_malloc0(sizeof(sysctrl_t));

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */
    if (cpu_model == NULL)
        cpu_model = "602";
    for (i = 0; i < smp_cpus; i++) {
        cpu = cpu_ppc_init(cpu_model);
        if (cpu == NULL) {
            fprintf(stderr, "Unable to find PowerPC CPU definition\n");
            exit(1);
        }
        env = &cpu->env;

        if (env->flags & POWERPC_FLAG_RTC_CLK) {
            /* POWER / PowerPC 601 RTC clock frequency is 7.8125 MHz */
            cpu_ppc_tb_init(env, 7812500UL);
        } else {
            /* Set time-base frequency to 100 Mhz */
            cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
        }
        qemu_register_reset(ppc_prep_reset, cpu);
    }

    /* allocate RAM */
    memory_region_allocate_system_memory(ram, NULL, "ppc_prep.ram", ram_size);
    memory_region_add_subregion(sysmem, 0, ram);

    if (linux_boot) {
        kernel_base = KERNEL_LOAD_ADDR;
        /* now we can load the kernel */
        kernel_size = load_image_targphys(kernel_filename, kernel_base,
                                          ram_size - kernel_base);
        if (kernel_size < 0) {
            hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
            exit(1);
        }
        /* load initrd */
        if (initrd_filename) {
            initrd_base = INITRD_LOAD_ADDR;
            initrd_size = load_image_targphys(initrd_filename, initrd_base,
                                              ram_size - initrd_base);
            if (initrd_size < 0) {
                hw_error("qemu: could not load initial ram disk '%s'\n",
                          initrd_filename);
            }
        } else {
            initrd_base = 0;
            initrd_size = 0;
        }
        ppc_boot_device = 'm';
    } else {
        kernel_base = 0;
        kernel_size = 0;
        initrd_base = 0;
        initrd_size = 0;
        ppc_boot_device = '\0';
        /* For now, OHW cannot boot from the network. */
        for (i = 0; boot_device[i] != '\0'; i++) {
            if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
                ppc_boot_device = boot_device[i];
                break;
            }
        }
        if (ppc_boot_device == '\0') {
            fprintf(stderr, "No valid boot device for Mac99 machine\n");
            exit(1);
        }
    }

    if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
        hw_error("Only 6xx bus is supported on PREP machine\n");
    }

    dev = qdev_create(NULL, "raven-pcihost");
    if (bios_name == NULL) {
        bios_name = BIOS_FILENAME;
    }
    qdev_prop_set_string(dev, "bios-name", bios_name);
    qdev_prop_set_uint32(dev, "elf-machine", ELF_MACHINE);
    pcihost = PCI_HOST_BRIDGE(dev);
    object_property_add_child(qdev_get_machine(), "raven", OBJECT(dev), NULL);
    qdev_init_nofail(dev);
    pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
    if (pci_bus == NULL) {
        fprintf(stderr, "Couldn't create PCI host controller.\n");
        exit(1);
    }
    sysctrl->contiguous_map_irq = qdev_get_gpio_in(dev, 0);

    /* PCI -> ISA bridge */
    pci = pci_create_simple(pci_bus, PCI_DEVFN(1, 0), "i82378");
    cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
    cpu = POWERPC_CPU(first_cpu);
    qdev_connect_gpio_out(&pci->qdev, 0,
                          cpu->env.irq_inputs[PPC6xx_INPUT_INT]);
    qdev_connect_gpio_out(&pci->qdev, 1, *cpu_exit_irq);
    sysbus_connect_irq(&pcihost->busdev, 0, qdev_get_gpio_in(&pci->qdev, 9));
    sysbus_connect_irq(&pcihost->busdev, 1, qdev_get_gpio_in(&pci->qdev, 11));
    sysbus_connect_irq(&pcihost->busdev, 2, qdev_get_gpio_in(&pci->qdev, 9));
    sysbus_connect_irq(&pcihost->busdev, 3, qdev_get_gpio_in(&pci->qdev, 11));
    isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(pci), "isa.0"));

    /* Super I/O (parallel + serial ports) */
    isa = isa_create(isa_bus, TYPE_PC87312);
    dev = DEVICE(isa);
    qdev_prop_set_uint8(dev, "config", 13); /* fdc, ser0, ser1, par0 */
    qdev_init_nofail(dev);

    /* init basic PC hardware */
    pci_vga_init(pci_bus);

    nb_nics1 = nb_nics;
    if (nb_nics1 > NE2000_NB_MAX)
        nb_nics1 = NE2000_NB_MAX;
    for(i = 0; i < nb_nics1; i++) {
        if (nd_table[i].model == NULL) {
	    nd_table[i].model = g_strdup("ne2k_isa");
        }
        if (strcmp(nd_table[i].model, "ne2k_isa") == 0) {
            isa_ne2000_init(isa_bus, ne2000_io[i], ne2000_irq[i],
                            &nd_table[i]);
        } else {
            pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
        }
    }

    ide_drive_get(hd, ARRAY_SIZE(hd));
    for(i = 0; i < MAX_IDE_BUS; i++) {
        isa_ide_init(isa_bus, ide_iobase[i], ide_iobase2[i], ide_irq[i],
                     hd[2 * i],
		     hd[2 * i + 1]);
    }
    isa_create_simple(isa_bus, "i8042");

    cpu = POWERPC_CPU(first_cpu);
    sysctrl->reset_irq = cpu->env.irq_inputs[PPC6xx_INPUT_HRESET];

    portio_list_init(&prep_port_list, NULL, prep_portio_list, sysctrl, "prep");
    portio_list_add(&prep_port_list, isa_address_space_io(isa), 0x0);

    /* PowerPC control and status register group */
#if 0
    memory_region_init_io(xcsr, NULL, &PPC_XCSR_ops, NULL, "ppc-xcsr", 0x1000);
    memory_region_add_subregion(sysmem, 0xFEFF0000, xcsr);
#endif

    if (usb_enabled(false)) {
        pci_create_simple(pci_bus, -1, "pci-ohci");
    }

    m48t59 = m48t59_init_isa(isa_bus, 0x0074, NVRAM_SIZE, 59);
    if (m48t59 == NULL)
        return;
    sysctrl->nvram = m48t59;

    /* Initialise NVRAM */
    nvram.opaque = m48t59;
    nvram.read_fn = &m48t59_read;
    nvram.write_fn = &m48t59_write;
    PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "PREP", ram_size, ppc_boot_device,
                         kernel_base, kernel_size,
                         kernel_cmdline,
                         initrd_base, initrd_size,
                         /* XXX: need an option to load a NVRAM image */
                         0,
                         graphic_width, graphic_height, graphic_depth);
}
Ejemplo n.º 2
0
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size, int vga_ram_size,
                             const char *boot_device, DisplayState *ds,
                             const char *kernel_filename,
                             const char *kernel_cmdline,
                             const char *initrd_filename,
                             const char *cpu_model)
{
    CPUState *env = NULL, *envs[MAX_CPUS];
    char buf[1024];
    qemu_irq *pic, **openpic_irqs;
    int unin_memory;
    int linux_boot, i;
    unsigned long bios_offset, vga_bios_offset;
    uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
    PCIBus *pci_bus;
    nvram_t nvram;
#if 0
    MacIONVRAMState *nvr;
    int nvram_mem_index;
#endif
    m48t59_t *m48t59;
    int vga_bios_size, bios_size;
    qemu_irq *dummy_irq;
    int pic_mem_index, dbdma_mem_index, cuda_mem_index;
    int ide_mem_index[2];
    int ppc_boot_device;
    int index;
    BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];

    linux_boot = (kernel_filename != NULL);

    /* init CPUs */
    if (cpu_model == NULL)
        cpu_model = "default";
    for (i = 0; i < smp_cpus; i++) {
        env = cpu_init(cpu_model);
        if (!env) {
            fprintf(stderr, "Unable to find PowerPC CPU definition\n");
            exit(1);
        }
        /* Set time-base frequency to 100 Mhz */
        cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
        env->osi_call = vga_osi_call;
#endif
        qemu_register_reset(&cpu_ppc_reset, env);
        register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
        envs[i] = env;
    }
    if (env->nip < 0xFFF80000) {
        /* Special test for PowerPC 601:
         * the boot vector is at 0xFFF00100, then we need a 1MB BIOS.
         * But the NVRAM is located at 0xFFF04000...
         */
        cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
    }

    /* allocate RAM */
    cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);

    /* allocate and load BIOS */
    bios_offset = ram_size + vga_ram_size;
    if (bios_name == NULL)
        bios_name = BIOS_FILENAME;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
    bios_size = load_image(buf, phys_ram_base + bios_offset);
    if (bios_size < 0 || bios_size > BIOS_SIZE) {
        cpu_abort(env, "qemu: could not load PowerPC bios '%s'\n", buf);
        exit(1);
    }
    bios_size = (bios_size + 0xfff) & ~0xfff;
    if (bios_size > 0x00080000) {
        /* As the NVRAM is located at 0xFFF04000, we cannot use 1 MB BIOSes */
        cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
    }
    cpu_register_physical_memory((uint32_t)(-bios_size),
                                 bios_size, bios_offset | IO_MEM_ROM);

    /* allocate and load VGA BIOS */
    vga_bios_offset = bios_offset + bios_size;
    snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
    vga_bios_size = load_image(buf, phys_ram_base + vga_bios_offset + 8);
    if (vga_bios_size < 0) {
        /* if no bios is present, we can still work */
        fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n", buf);
        vga_bios_size = 0;
    } else {
        /* set a specific header (XXX: find real Apple format for NDRV
           drivers) */
        phys_ram_base[vga_bios_offset] = 'N';
        phys_ram_base[vga_bios_offset + 1] = 'D';
        phys_ram_base[vga_bios_offset + 2] = 'R';
        phys_ram_base[vga_bios_offset + 3] = 'V';
        cpu_to_be32w((uint32_t *)(phys_ram_base + vga_bios_offset + 4),
                     vga_bios_size);
        vga_bios_size += 8;
    }
    vga_bios_size = (vga_bios_size + 0xfff) & ~0xfff;

    if (linux_boot) {
        kernel_base = KERNEL_LOAD_ADDR;
        /* now we can load the kernel */
        kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);
        if (kernel_size < 0) {
            cpu_abort(env, "qemu: could not load kernel '%s'\n",
                      kernel_filename);
            exit(1);
        }
        /* load initrd */
        if (initrd_filename) {
            initrd_base = INITRD_LOAD_ADDR;
            initrd_size = load_image(initrd_filename,
                                     phys_ram_base + initrd_base);
            if (initrd_size < 0) {
                cpu_abort(env, "qemu: could not load initial ram disk '%s'\n",
                          initrd_filename);
                exit(1);
            }
        } else {
            initrd_base = 0;
            initrd_size = 0;
        }
        ppc_boot_device = 'm';
    } else {
        kernel_base = 0;
        kernel_size = 0;
        initrd_base = 0;
        initrd_size = 0;
        ppc_boot_device = '\0';
        /* We consider that NewWorld PowerMac never have any floppy drive
         * For now, OHW cannot boot from the network.
         */
        for (i = 0; boot_device[i] != '\0'; i++) {
            if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
                ppc_boot_device = boot_device[i];
                break;
            }
        }
        if (ppc_boot_device == '\0') {
            fprintf(stderr, "No valid boot device for Mac99 machine\n");
            exit(1);
        }
    }

    isa_mem_base = 0x80000000;

    /* Register 8 MB of ISA IO space */
    isa_mmio_init(0xf2000000, 0x00800000);

    /* UniN init */
    unin_memory = cpu_register_io_memory(0, unin_read, unin_write, NULL);
    cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);

    openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
    openpic_irqs[0] =
        qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
    for (i = 0; i < smp_cpus; i++) {
        /* Mac99 IRQ connection between OpenPIC outputs pins
         * and PowerPC input pins
         */
        switch (PPC_INPUT(env)) {
        case PPC_FLAGS_INPUT_6xx:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
            break;
#if defined(TARGET_PPC64)
        case PPC_FLAGS_INPUT_970:
            openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
            openpic_irqs[i][OPENPIC_OUTPUT_INT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
            openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
            /* Not connected ? */
            openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
            /* Check this */
            openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
                ((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
            break;
#endif /* defined(TARGET_PPC64) */
        default:
            cpu_abort(env, "Bus model not supported on mac99 machine\n");
            exit(1);
        }
    }
    pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
    pci_bus = pci_pmac_init(pic);
    /* init basic PC hardware */
    pci_vga_init(pci_bus, ds, phys_ram_base + ram_size,
                 ram_size, vga_ram_size,
                 vga_bios_offset, vga_bios_size);

    /* XXX: suppress that */
    dummy_irq = i8259_init(NULL);

    /* XXX: use Mac Serial port */
    serial_init(0x3f8, dummy_irq[4], 115200, serial_hds[0]);
    for(i = 0; i < nb_nics; i++) {
        if (!nd_table[i].model)
            nd_table[i].model = "ne2k_pci";
        pci_nic_init(pci_bus, &nd_table[i], -1);
    }
    if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
        fprintf(stderr, "qemu: too many IDE bus\n");
        exit(1);
    }
    for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
        index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
        if (index != -1)
            hd[i] = drives_table[index].bdrv;
        else
            hd[i] = NULL;
    }
#if 1
    ide_mem_index[0] = pmac_ide_init(&hd[0], pic[0x13]);
    ide_mem_index[1] = pmac_ide_init(&hd[2], pic[0x14]);
#else
    pci_cmd646_ide_init(pci_bus, &hd[0], 0);
#endif
    /* cuda also initialize ADB */
    cuda_init(&cuda_mem_index, pic[0x19]);

    adb_kbd_init(&adb_bus);
    adb_mouse_init(&adb_bus);

    dbdma_init(&dbdma_mem_index);

    macio_init(pci_bus, 0x0022, 0, pic_mem_index, dbdma_mem_index,
               cuda_mem_index, NULL, 2, ide_mem_index);

    if (usb_enabled) {
        usb_ohci_init_pci(pci_bus, 3, -1);
    }

    if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
        graphic_depth = 15;
#if 0 /* XXX: this is ugly but needed for now, or OHW won't boot */
    /* The NewWorld NVRAM is not located in the MacIO device */
    nvr = macio_nvram_init(&nvram_mem_index, 0x2000);
    pmac_format_nvram_partition(nvr, 0x2000);
    macio_nvram_map(nvr, 0xFFF04000);
    nvram.opaque = nvr;
    nvram.read_fn = &macio_nvram_read;
    nvram.write_fn = &macio_nvram_write;
#else
    m48t59 = m48t59_init(dummy_irq[8], 0xFFF04000, 0x0074, NVRAM_SIZE, 59);
    nvram.opaque = m48t59;
    nvram.read_fn = &m48t59_read;
    nvram.write_fn = &m48t59_write;
#endif
    PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "MAC99", ram_size,
                         ppc_boot_device, kernel_base, kernel_size,
                         kernel_cmdline,
                         initrd_base, initrd_size,
                         /* XXX: need an option to load a NVRAM image */
                         0,
                         graphic_width, graphic_height, graphic_depth);
    /* No PCI init: the BIOS will do it */

    /* Special port to get debug messages from Open-Firmware */
    register_ioport_write(0x0F00, 4, 1, &PPC_debug_write, NULL);
}