static int TestBadActions( void )
{
PortAudioStream *stream = NULL;
PaError result;
PaQaData myData;
/* Setup data for synthesis thread. */
myData.framesLeft = (unsigned long) (SAMPLE_RATE * 100); /* 100 seconds */
myData.numChannels = 1;
myData.mode = MODE_OUTPUT;
/* Default output. */
EXPECT( "TestBadActions", ((result = Pa_OpenStream(
&stream,
paNoDevice, 0, paFloat32, NULL,
Pa_GetDefaultOutputDeviceID(), 2, paFloat32, NULL,
SAMPLE_RATE, FRAMES_PER_BUFFER, NUM_BUFFERS,
paClipOff,
QaCallback,
&myData )
) == 0) );
HOPEFOR( "start", ((result = Pa_StartStream( NULL )) == paBadStreamPtr) );
HOPEFOR( "stop", ((result = Pa_StopStream( NULL )) == paBadStreamPtr) );
HOPEFOR( "active?", ((result = Pa_StreamActive( NULL )) == paBadStreamPtr) );
HOPEFOR( "close", ((result = Pa_CloseStream( NULL )) == paBadStreamPtr) );
HOPEFOR( "time?", ((result = (PaError)Pa_StreamTime( NULL )) != 0) );
HOPEFOR( "CPULoad?", ((result = (PaError)Pa_GetCPULoad( NULL )) != 0) );
error:
if( stream != NULL ) Pa_CloseStream( stream );
return result;
}
int main(void)
{
PortAudioStream *stream;
PaError err;
paTestData data = {0};
double load;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,/* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
1, /* mono output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
0, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
do
{
data.numSines++;
Pa_Sleep( 200 );
load = Pa_GetCPULoad( stream );
printf("numSines = %d, CPU load = %f\n", data.numSines, load );
} while( load < 0.8 );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
PaError PlaySine( paTestData *data, PaStreamFlags flags, float amplitude )
{
PortAudioStream *stream;
PaError err;
data->left_phase = data->right_phase = 0;
data->amplitude = amplitude;
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,/* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
1024,
0, /* number of buffers, if zero then use default minimum */
flags, /* we won't output out of range samples so don't bother clipping them */
sineCallback,
(void *)data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
Pa_Sleep( NUM_SECONDS * 1000 );
printf("CPULoad = %8.6f\n", Pa_GetCPULoad( stream ) );
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
return paNoError;
error:
return err;
}
int main(void)
{
PortAudioStream *stream;
PaError err;
int numStress;
paTestData data = {0};
double load;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d. MAX_LOAD = %f\n",
SAMPLE_RATE, FRAMES_PER_BUFFER, MAX_LOAD );
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,/* default input device */
0, /* no input */
paFloat32, /* 32 bit floating point input */
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
1, /* mono output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER, /* frames per buffer */
0, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
/* Determine number of sines required to get to 50% */
do
{
data.numSines++;
Pa_Sleep( 100 );
load = Pa_GetCPULoad( stream );
printf("numSines = %d, CPU load = %f\n", data.numSines, load );
}
while( load < 0.5 );
/* Calculate target stress value then ramp up to that level*/
numStress = (int) (2.0 * data.numSines * MAX_LOAD );
for( ; data.numSines < numStress; data.numSines++ )
{
Pa_Sleep( 200 );
load = Pa_GetCPULoad( stream );
printf("STRESSING: numSines = %d, CPU load = %f\n", data.numSines, load );
}
printf("Suffer for 5 seconds.\n");
Pa_Sleep( 5000 );
printf("Stop stream.\n");
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
int main(void)
{
int i;
PortAudioStream *stream;
PaError err;
paTestData data = {0};
double load;
printf("PortAudio Test: output sine wave. SR = %d, BufSize = %d\n", SAMPLE_RATE, FRAMES_PER_BUFFER);
/* initialise sinusoidal wavetable */
for( i=0; i<TABLE_SIZE; i++ )
{
data.sine[i] = (float) sin( ((double)i/(double)TABLE_SIZE) * M_PI * 2. );
}
data.sine[TABLE_SIZE] = data.sine[0]; /* set guard point */
err = Pa_Initialize();
if( err != paNoError ) goto error;
err = Pa_OpenStream(
&stream,
paNoDevice,
0, /* no input */
paFloat32,
NULL,
Pa_GetDefaultOutputDeviceID(), /* default output device */
2, /* stereo output */
paFloat32, /* 32 bit floating point output */
NULL,
SAMPLE_RATE,
FRAMES_PER_BUFFER,
0, /* number of buffers, if zero then use default minimum */
paClipOff, /* we won't output out of range samples so don't bother clipping them */
patestCallback,
&data );
if( err != paNoError ) goto error;
err = Pa_StartStream( stream );
if( err != paNoError ) goto error;
/* Play an increasing number of sine waves until we hit MAX_USAGE */
do
{
data.numSines++;
Pa_Sleep( 200 );
load = Pa_GetCPULoad( stream );
printf("numSines = %d, CPU load = %f\n", data.numSines, load );
fflush( stdout );
}
while( (load < MAX_USAGE) && (data.numSines < MAX_SINES) );
printf("Press ENTER to stop.\n" ); fflush(stdout);
getchar();
printf("CPU load = %f\n", Pa_GetCPULoad( stream ) );
err = Pa_StopStream( stream );
if( err != paNoError ) goto error;
err = Pa_CloseStream( stream );
if( err != paNoError ) goto error;
Pa_Terminate();
printf("Test finished.\n");
fflush( stdout );
return err;
error:
Pa_Terminate();
fprintf( stderr, "An error occured while using the portaudio stream\n" );
fprintf( stderr, "Error number: %d\n", err );
fprintf( stderr, "Error message: %s\n", Pa_GetErrorText( err ) );
return err;
}
