/**
The constructor function enables ACPI IO space.
If ACPI I/O space not enabled, this function will enable it.
It will always return RETURN_SUCCESS.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT8 u8Device = 7;
UINT16 u16VendorID = 0;
UINT16 u16DeviceID = 0;
u16VendorID = PciRead16(PCI_LIB_ADDRESS(0, u8Device, 0, 0));
u16DeviceID = PciRead16(PCI_LIB_ADDRESS(0, u8Device, 0, 2));
if ( u16VendorID != 0x8086
|| u16DeviceID != 0x7113)
return RETURN_ABORTED;
if (PciRead8 (PCI_LIB_ADDRESS (0,u8Device,0,0x80)) & 1) {
mPmba = PciRead32 (PCI_LIB_ADDRESS (0, u8Device, 0, 0x40));
ASSERT (mPmba & PCI_BAR_IO);
DEBUG((DEBUG_INFO, "%a:%d mPmba:%x\n", __FUNCTION__, __LINE__, mPmba));
mPmba &= ~PCI_BAR_IO;
DEBUG((DEBUG_INFO, "%a:%d mPmba:%x\n", __FUNCTION__, __LINE__, mPmba));
} else {
PciAndThenOr32 (PCI_LIB_ADDRESS (0,u8Device,0,0x40),
(UINT32) ~0xfc0, mPmba);
PciOr8 (PCI_LIB_ADDRESS (0,u8Device,0,0x04), 0x01);
DEBUG((DEBUG_INFO, "%a:%d mPmba:%x\n", __FUNCTION__, __LINE__, mPmba));
}
//
// ACPI Timer enable is in Bus 0, Device ?, Function 3
//
PciOr8 (PCI_LIB_ADDRESS (0,u8Device,0,0x80), 0x01);
return RETURN_SUCCESS;
}
/**
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
value, followed a bitwise OR with another 32-bit value and saves
the value in the S3 script to be replayed on S3 resume.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 32-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
@param Address Address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
S3PciAndThenOr32 (
IN UINTN Address,
IN UINT32 AndData,
IN UINT32 OrData
)
{
return InternalSavePciWrite32ValueToBootScript (Address, PciAndThenOr32 (Address, AndData, OrData));
}
/**
The constructor function enables ACPI IO space.
If ACPI I/O space not enabled, this function will enable it.
It will always return RETURN_SUCCESS.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
}
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program the Power Management Base Address from a PCD.
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// Enable PMBA I/O port decodes
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
return RETURN_SUCCESS;
}
/**
The constructor function caches the ACPI tick counter address, and,
if necessary, enables ACPI IO space.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINTN PmRegMisc;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_PIIX4 (0x40);
PmRegMisc = POWER_MGMT_REGISTER_PIIX4 (0x80);
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (0x40);
PmRegMisc = POWER_MGMT_REGISTER_Q35 (0x80);
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
}
mAcpiTimerIoAddr = (PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET;
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (PmRegMisc) & PMIOSE) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program the Power Management Base Address from a PCD.
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// Enable PMBA I/O port decodes in PMREGMISC
//
PciOr8 (PmRegMisc, PMIOSE);
}
return RETURN_SUCCESS;
}
VOID
MiscInitialization (
VOID
)
{
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
// Build the CPU hob with 36-bit addressing and 16-bits of IO space.
//
BuildCpuHob (36, 16);
//
// If PMREGMISC/PMIOSE is set, assume the ACPI PMBA has been configured (for
// example by Xen) and skip the setup here. This matches the logic in
// AcpiTimerLibConstructor ().
//
if ((PciRead8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80)) & 0x01) == 0) {
//
// The PEI phase should be exited with fully accessibe PIIX4 IO space:
// 1. set PMBA
//
PciAndThenOr32 (
PCI_LIB_ADDRESS (0, 1, 3, 0x40),
(UINT32) ~0xFFC0,
PcdGet16 (PcdAcpiPmBaseAddress)
);
//
// 2. set PCICMD/IOSE
//
PciOr8 (
PCI_LIB_ADDRESS (0, 1, 3, PCI_COMMAND_OFFSET),
EFI_PCI_COMMAND_IO_SPACE
);
//
// 3. set PMREGMISC/PMIOSE
//
PciOr8 (PCI_LIB_ADDRESS (0, 1, 3, 0x80), 0x01);
}
}
VOID
MiscInitialization ()
{
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
// Build the CPU hob with 36-bit addressing and 16-bits of IO space.
//
BuildCpuHob (36, 16);
//
// Set the PM I/O base address to 0x400
//
PciAndThenOr32 (PCI_LIB_ADDRESS (0, 1, 3, 0x40), (UINT32) ~0xfc0, 0x400);
}
/**
The constructor function enables ACPI IO space.
If ACPI I/O space not enabled, this function will enable it.
It will always return RETURN_SUCCESS.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
//
// Check to see if the PIIX4 Power Management Base Address is already enabled
//
if ((PciRead8 (PMREGMISC) & PMIOSE) == 0) {
//
// If the PIIX4 Power Management Base Address is not programmed,
// then program the PIIX4 Power Management Base Address from a PCD.
//
PciAndThenOr32 (PMBA, (UINT32)(~0x0000FFC0), PcdGet16 (PcdAcpiPmBaseAddress));
//
// Enable PMBA I/O port decodes in PMREGMISC
//
PciOr8 (PMREGMISC, PMIOSE);
}
return RETURN_SUCCESS;
}
/**
This function performs a read-modify-write operation on the contents from a given
location in the PCI configuration space.
@param PeiServices An indirect pointer to the PEI Services Table
published by the PEI Foundation.
@param This Pointer to local data for the interface.
@param Width The width of the access. Enumerated in bytes. Type
EFI_PEI_PCI_CFG_PPI_WIDTH is defined in Read().
@param Address The physical address of the access.
@param SetBits Points to value to bitwise-OR with the read configuration value.
The size of the value is determined by Width.
@param ClearBits Points to the value to negate and bitwise-AND with the read configuration value.
The size of the value is determined by Width.
@retval EFI_SUCCESS The function completed successfully.
@retval EFI_INVALID_PARAMETER The invalid access width.
**/
EFI_STATUS
EFIAPI
PciCfg2Modify (
IN CONST EFI_PEI_SERVICES **PeiServices,
IN CONST EFI_PEI_PCI_CFG2_PPI *This,
IN EFI_PEI_PCI_CFG_PPI_WIDTH Width,
IN UINT64 Address,
IN VOID *SetBits,
IN VOID *ClearBits
)
{
UINTN PciLibAddress;
UINT16 ClearValue16;
UINT16 SetValue16;
UINT32 ClearValue32;
UINT32 SetValue32;
PciLibAddress = PciCfgAddressConvert ((EFI_PEI_PCI_CFG_PPI_PCI_ADDRESS *) &Address);
if (Width == EfiPeiPciCfgWidthUint8) {
PciAndThenOr8 (PciLibAddress, (UINT8) (~(*(UINT8 *) ClearBits)), *((UINT8 *) SetBits));
} else if (Width == EfiPeiPciCfgWidthUint16) {
if ((PciLibAddress & 0x01) == 0) {
//
// Aligned Pci address access
//
ClearValue16 = (UINT16) (~ReadUnaligned16 ((UINT16 *) ClearBits));
SetValue16 = ReadUnaligned16 ((UINT16 *) SetBits);
PciAndThenOr16 (PciLibAddress, ClearValue16, SetValue16);
} else {
//
// Unaligned Pci address access, break up the request into byte by byte.
//
PciAndThenOr8 (PciLibAddress, (UINT8) (~(*(UINT8 *) ClearBits)), *((UINT8 *) SetBits));
PciAndThenOr8 (PciLibAddress + 1, (UINT8) (~(*((UINT8 *) ClearBits + 1))), *((UINT8 *) SetBits + 1));
}
} else if (Width == EfiPeiPciCfgWidthUint32) {
if ((PciLibAddress & 0x03) == 0) {
//
// Aligned Pci address access
//
ClearValue32 = (UINT32) (~ReadUnaligned32 ((UINT32 *) ClearBits));
SetValue32 = ReadUnaligned32 ((UINT32 *) SetBits);
PciAndThenOr32 (PciLibAddress, ClearValue32, SetValue32);
} else if ((PciLibAddress & 0x01) == 0) {
//
// Unaligned Pci address access, break up the request into word by word.
//
ClearValue16 = (UINT16) (~ReadUnaligned16 ((UINT16 *) ClearBits));
SetValue16 = ReadUnaligned16 ((UINT16 *) SetBits);
PciAndThenOr16 (PciLibAddress, ClearValue16, SetValue16);
ClearValue16 = (UINT16) (~ReadUnaligned16 ((UINT16 *) ClearBits + 1));
SetValue16 = ReadUnaligned16 ((UINT16 *) SetBits + 1);
PciAndThenOr16 (PciLibAddress + 2, ClearValue16, SetValue16);
} else {
//
// Unaligned Pci address access, break up the request into byte by byte.
//
PciAndThenOr8 (PciLibAddress, (UINT8) (~(*(UINT8 *) ClearBits)), *((UINT8 *) SetBits));
PciAndThenOr8 (PciLibAddress + 1, (UINT8) (~(*((UINT8 *) ClearBits + 1))), *((UINT8 *) SetBits + 1));
PciAndThenOr8 (PciLibAddress + 2, (UINT8) (~(*((UINT8 *) ClearBits + 2))), *((UINT8 *) SetBits + 2));
PciAndThenOr8 (PciLibAddress + 3, (UINT8) (~(*((UINT8 *) ClearBits + 3))), *((UINT8 *) SetBits + 3));
}
} else {
return EFI_INVALID_PARAMETER;
}
return EFI_SUCCESS;
}
VOID
MiscInitialization (
VOID
)
{
UINTN PmCmd;
UINTN Pmba;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Disable A20 Mask
//
IoOr8 (0x92, BIT1);
//
// Build the CPU HOB with guest RAM size dependent address width and 16-bits
// of IO space. (Side note: unlike other HOBs, the CPU HOB is needed during
// S3 resume as well, so we build it unconditionally.)
//
BuildCpuHob (mPhysMemAddressWidth, 16);
//
// Determine platform type and save Host Bridge DID to PCD
//
switch (mHostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_PIIX4 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
PmCmd = POWER_MGMT_REGISTER_Q35 (PCI_COMMAND_OFFSET);
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, mHostBridgeDevId));
ASSERT (FALSE);
return;
}
PcdSet16 (PcdOvmfHostBridgePciDevId, mHostBridgeDevId);
//
// If the appropriate IOspace enable bit is set, assume the ACPI PMBA
// has been configured (e.g., by Xen) and skip the setup here.
// This matches the logic in AcpiTimerLibConstructor ().
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// The PEI phase should be exited with fully accessibe ACPI PM IO space:
// 1. set PMBA
//
PciAndThenOr32 (Pmba, (UINT32) ~0xFFC0, PcdGet16 (PcdAcpiPmBaseAddress));
//
// 2. set PCICMD/IOSE
//
PciOr8 (PmCmd, EFI_PCI_COMMAND_IO_SPACE);
//
// 3. set ACPI PM IO enable bit (PMREGMISC:PMIOSE or ACPI_CNTL:ACPI_EN)
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
if (mHostBridgeDevId == INTEL_Q35_MCH_DEVICE_ID) {
//
// Set Root Complex Register Block BAR
//
PciWrite32 (
POWER_MGMT_REGISTER_Q35 (ICH9_RCBA),
ICH9_ROOT_COMPLEX_BASE | ICH9_RCBA_EN
);
//
// Set PCI Express Register Range Base Address
//
PciExBarInitialization ();
}
}
/**
The constructor function caches the ACPI tick counter address, and,
if necessary, enables ACPI IO space.
@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.
**/
RETURN_STATUS
EFIAPI
AcpiTimerLibConstructor (
VOID
)
{
UINT16 HostBridgeDevId;
UINTN Pmba;
UINT32 PmbaAndVal;
UINT32 PmbaOrVal;
UINTN AcpiCtlReg;
UINT8 AcpiEnBit;
//
// Query Host Bridge DID to determine platform type
//
HostBridgeDevId = PciRead16 (OVMF_HOSTBRIDGE_DID);
switch (HostBridgeDevId) {
case INTEL_82441_DEVICE_ID:
#ifdef VBOX
// HACK ALERT! There is no host bridge device in the PCIe chipset, and the same PIIX4 PM device is used.
// But there might be some other device at 0:0.0.
default:
#endif
Pmba = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMBA);
PmbaAndVal = ~(UINT32)PIIX4_PMBA_MASK;
PmbaOrVal = PIIX4_PMBA_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_PIIX4 (PIIX4_PMREGMISC);
AcpiEnBit = PIIX4_PMREGMISC_PMIOSE;
break;
case INTEL_Q35_MCH_DEVICE_ID:
Pmba = POWER_MGMT_REGISTER_Q35 (ICH9_PMBASE);
PmbaAndVal = ~(UINT32)ICH9_PMBASE_MASK;
PmbaOrVal = ICH9_PMBASE_VALUE;
AcpiCtlReg = POWER_MGMT_REGISTER_Q35 (ICH9_ACPI_CNTL);
AcpiEnBit = ICH9_ACPI_CNTL_ACPI_EN;
break;
#ifndef VBOX
default:
DEBUG ((EFI_D_ERROR, "%a: Unknown Host Bridge Device ID: 0x%04x\n",
__FUNCTION__, HostBridgeDevId));
ASSERT (FALSE);
return RETURN_UNSUPPORTED;
#endif
}
//
// Check to see if the Power Management Base Address is already enabled
//
if ((PciRead8 (AcpiCtlReg) & AcpiEnBit) == 0) {
//
// If the Power Management Base Address is not programmed,
// then program it now.
//
PciAndThenOr32 (Pmba, PmbaAndVal, PmbaOrVal);
//
// Enable PMBA I/O port decodes
//
PciOr8 (AcpiCtlReg, AcpiEnBit);
}
mAcpiTimerIoAddr = (PciRead32 (Pmba) & ~PMBA_RTE) + ACPI_TIMER_OFFSET;
return RETURN_SUCCESS;
}
