SV *
PerlIOVia_method(pTHX_ PerlIO * f, char *method, CV ** save, int flags,
...)
{
PerlIOVia *s = PerlIOSelf(f, PerlIOVia);
CV *cv =
(*save) ? *save : PerlIOVia_fetchmethod(aTHX_ s, method, save);
SV *result = Nullsv;
va_list ap;
va_start(ap, flags);
if (cv != (CV *) - 1) {
IV count;
dSP;
SV *arg;
PUSHSTACKi(PERLSI_MAGIC);
ENTER;
SPAGAIN;
PUSHMARK(sp);
XPUSHs(s->obj);
while ((arg = va_arg(ap, SV *))) {
XPUSHs(arg);
}
if (*PerlIONext(f)) {
if (!s->fh) {
GV *gv = newGVgen(HvNAME(s->stash));
GvIOp(gv) = newIO();
s->fh = newRV_noinc((SV *) gv);
s->io = GvIOp(gv);
}
IoIFP(s->io) = PerlIONext(f);
IoOFP(s->io) = PerlIONext(f);
XPUSHs(s->fh);
}
else {
PerlIO_debug("No next\n");
/* FIXME: How should this work for OPEN etc? */
}
PUTBACK;
count = call_sv((SV *) cv, flags);
if (count) {
SPAGAIN;
result = POPs;
PUTBACK;
}
else {
result = &PL_sv_undef;
}
LEAVE;
POPSTACK;
}
IV
PerlIOMmap_map(pTHX_ PerlIO *f)
{
dVAR;
PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
const IV flags = PerlIOBase(f)->flags;
IV code = 0;
if (m->len)
abort();
if (flags & PERLIO_F_CANREAD) {
PerlIOBuf * const b = PerlIOSelf(f, PerlIOBuf);
const int fd = PerlIO_fileno(f);
Stat_t st;
code = Fstat(fd, &st);
if (code == 0 && S_ISREG(st.st_mode)) {
SSize_t len = st.st_size - b->posn;
if (len > 0) {
Off_t posn;
if (PL_mmap_page_size <= 0)
Perl_croak(aTHX_ "panic: bad pagesize %" IVdf,
PL_mmap_page_size);
if (b->posn < 0) {
/*
* This is a hack - should never happen - open should
* have set it !
*/
b->posn = PerlIO_tell(PerlIONext(f));
}
posn = (b->posn / PL_mmap_page_size) * PL_mmap_page_size;
len = st.st_size - posn;
m->mptr = (Mmap_t)mmap(NULL, len, PROT_READ, MAP_SHARED, fd, posn);
if (m->mptr && m->mptr != (Mmap_t) - 1) {
#if 0 && defined(HAS_MADVISE) && defined(MADV_SEQUENTIAL)
madvise(m->mptr, len, MADV_SEQUENTIAL);
#endif
#if 0 && defined(HAS_MADVISE) && defined(MADV_WILLNEED)
madvise(m->mptr, len, MADV_WILLNEED);
#endif
PerlIOBase(f)->flags =
(flags & ~PERLIO_F_EOF) | PERLIO_F_RDBUF;
b->end = ((STDCHAR *) m->mptr) + len;
b->buf = ((STDCHAR *) m->mptr) + (b->posn - posn);
b->ptr = b->buf;
m->len = len;
}
else {
b->buf = NULL;
}
}
else {
PerlIOBase(f)->flags =
flags | PERLIO_F_EOF | PERLIO_F_RDBUF;
b->buf = NULL;
b->ptr = b->end = b->ptr;
code = -1;
}
}
}
return code;
}
IV
PerlIOMmap_unmap(pTHX_ PerlIO *f)
{
PerlIOMmap * const m = PerlIOSelf(f, PerlIOMmap);
IV code = 0;
if (m->len) {
PerlIOBuf * const b = &m->base;
if (b->buf) {
/* The munmap address argument is tricky: depending on the
* standard it is either "void *" or "caddr_t" (which is
* usually "char *" (signed or unsigned). If we cast it
* to "void *", those that have it caddr_t and an uptight
* C++ compiler, will freak out. But casting it as char*
* should work. Maybe. (Using Mmap_t figured out by
* Configure doesn't always work, apparently.) */
code = munmap((char*)m->mptr, m->len);
b->buf = NULL;
m->len = 0;
m->mptr = NULL;
if (PerlIO_seek(PerlIONext(f), b->posn, SEEK_SET) != 0)
code = -1;
}
b->ptr = b->end = b->buf;
PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF);
}
return code;
}
IV
PerlIOWin32_pushed(pTHX_ PerlIO *f, const char *mode, SV *arg, PerlIO_funcs *tab)
{
IV code = PerlIOBase_pushed(aTHX_ f,mode,arg,tab);
if (*PerlIONext(f))
{
PerlIOWin32 *s = PerlIOSelf(f,PerlIOWin32);
s->fd = PerlIO_fileno(PerlIONext(f));
}
PerlIOBase(f)->flags |= PERLIO_F_OPEN;
Perl_ck_warner_d(aTHX_
packWARN(WARN_EXPERIMENTAL__WIN32_PERLIO),
"PerlIO layer ':win32' is experimental");
return code;
}
Off_t
PerlIOEncode_tell(pTHX_ PerlIO * f)
{
PerlIOBuf *b = PerlIOSelf(f, PerlIOBuf);
/* Unfortunately the only way to get a postion is to (re-)translate,
the UTF8 we have in bufefr and then ask layer below
*/
PerlIO_flush(f);
if (b->buf && b->ptr > b->buf) {
Perl_croak(aTHX_ "Cannot tell at partial character");
}
return PerlIO_tell(PerlIONext(f));
}
IV
PerlIOEncode_flush(pTHX_ PerlIO * f)
{
PerlIOEncode *e = PerlIOSelf(f, PerlIOEncode);
IV code = 0;
if (e->bufsv) {
dSP;
SV *str;
char *s;
STRLEN len;
SSize_t count = 0;
if ((PerlIOBase(f)->flags & PERLIO_F_WRBUF) && (e->base.ptr > e->base.buf)) {
if (e->inEncodeCall) return 0;
/* Write case - encode the buffer and write() to layer below */
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
PUSHMARK(sp);
XPUSHs(e->enc);
SvCUR_set(e->bufsv, e->base.ptr - e->base.buf);
SvUTF8_on(e->bufsv);
XPUSHs(e->bufsv);
XPUSHs(e->chk);
PUTBACK;
e->inEncodeCall = 1;
if (call_method("encode", G_SCALAR) != 1) {
e->inEncodeCall = 0;
Perl_die(aTHX_ "panic: encode did not return a value");
}
e->inEncodeCall = 0;
SPAGAIN;
str = POPs;
PUTBACK;
s = SvPV(str, len);
count = PerlIO_write(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
FREETMPS;
LEAVE;
POPSTACK;
if (PerlIO_flush(PerlIONext(f)) != 0) {
code = -1;
}
if (SvCUR(e->bufsv)) {
/* Did not all translate */
e->base.ptr = e->base.buf+SvCUR(e->bufsv);
return code;
}
}
else if ((PerlIOBase(f)->flags & PERLIO_F_RDBUF)) {
/* read case */
/* if we have any untranslated stuff then unread that first */
/* FIXME - unread is fragile is there a better way ? */
if (e->dataSV && SvCUR(e->dataSV)) {
s = SvPV(e->dataSV, len);
count = PerlIO_unread(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
SvCUR_set(e->dataSV,0);
}
/* See if there is anything left in the buffer */
if (e->base.ptr < e->base.end) {
if (e->inEncodeCall) return 0;
/* Bother - have unread data.
re-encode and unread() to layer below
*/
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
str = sv_newmortal();
sv_upgrade(str, SVt_PV);
SvPV_set(str, (char*)e->base.ptr);
SvLEN_set(str, 0);
SvCUR_set(str, e->base.end - e->base.ptr);
SvPOK_only(str);
SvUTF8_on(str);
PUSHMARK(sp);
XPUSHs(e->enc);
XPUSHs(str);
XPUSHs(e->chk);
PUTBACK;
e->inEncodeCall = 1;
if (call_method("encode", G_SCALAR) != 1) {
e->inEncodeCall = 0;
Perl_die(aTHX_ "panic: encode did not return a value");
}
e->inEncodeCall = 0;
SPAGAIN;
str = POPs;
PUTBACK;
s = SvPV(str, len);
count = PerlIO_unread(PerlIONext(f),s,len);
if ((STRLEN)count != len) {
code = -1;
}
FREETMPS;
LEAVE;
POPSTACK;
}
}
e->base.ptr = e->base.end = e->base.buf;
PerlIOBase(f)->flags &= ~(PERLIO_F_RDBUF | PERLIO_F_WRBUF);
}
return code;
}
IV
PerlIOEncode_fill(pTHX_ PerlIO * f)
{
PerlIOEncode *e = PerlIOSelf(f, PerlIOEncode);
dSP;
IV code = 0;
PerlIO *n;
SSize_t avail;
if (PerlIO_flush(f) != 0)
return -1;
n = PerlIONext(f);
if (!PerlIO_fast_gets(n)) {
/* Things get too messy if we don't have a buffer layer
push a :perlio to do the job */
char mode[8];
n = PerlIO_push(aTHX_ n, &PerlIO_perlio, PerlIO_modestr(f,mode), Nullsv);
if (!n) {
Perl_die(aTHX_ "panic: cannot push :perlio for %p",f);
}
}
PUSHSTACKi(PERLSI_MAGIC);
SPAGAIN;
ENTER;
SAVETMPS;
retry:
avail = PerlIO_get_cnt(n);
if (avail <= 0) {
avail = PerlIO_fill(n);
if (avail == 0) {
avail = PerlIO_get_cnt(n);
}
else {
if (!PerlIO_error(n) && PerlIO_eof(n))
avail = 0;
}
}
if (avail > 0 || (e->flags & NEEDS_LINES)) {
STDCHAR *ptr = PerlIO_get_ptr(n);
SSize_t use = (avail >= 0) ? avail : 0;
SV *uni;
char *s = NULL;
STRLEN len = 0;
e->base.ptr = e->base.end = (STDCHAR *) NULL;
(void) PerlIOEncode_get_base(aTHX_ f);
if (!e->dataSV)
e->dataSV = newSV(0);
if (SvTYPE(e->dataSV) < SVt_PV) {
sv_upgrade(e->dataSV,SVt_PV);
}
if (e->flags & NEEDS_LINES) {
/* Encoding needs whole lines (e.g. iso-2022-*)
search back from end of available data for
and line marker
*/
STDCHAR *nl = ptr+use-1;
while (nl >= ptr) {
if (*nl == '\n') {
break;
}
nl--;
}
if (nl >= ptr && *nl == '\n') {
/* found a line - take up to and including that */
use = (nl+1)-ptr;
}
else if (avail > 0) {
/* No line, but not EOF - append avail to the pending data */
sv_catpvn(e->dataSV, (char*)ptr, use);
PerlIO_set_ptrcnt(n, ptr+use, 0);
goto retry;
}
else if (!SvCUR(e->dataSV)) {
goto end_of_file;
}
}
if (SvCUR(e->dataSV)) {
/* something left over from last time - create a normal
SV with new data appended
*/
if (use + SvCUR(e->dataSV) > e->base.bufsiz) {
if (e->flags & NEEDS_LINES) {
/* Have to grow buffer */
e->base.bufsiz = use + SvCUR(e->dataSV);
PerlIOEncode_get_base(aTHX_ f);
}
else {
use = e->base.bufsiz - SvCUR(e->dataSV);
}
}
sv_catpvn(e->dataSV,(char*)ptr,use);
}
else {
/* Create a "dummy" SV to represent the available data from layer below */
if (SvLEN(e->dataSV) && SvPVX_const(e->dataSV)) {
Safefree(SvPVX_mutable(e->dataSV));
}
if (use > (SSize_t)e->base.bufsiz) {
if (e->flags & NEEDS_LINES) {
/* Have to grow buffer */
e->base.bufsiz = use;
PerlIOEncode_get_base(aTHX_ f);
}
else {
use = e->base.bufsiz;
}
}
SvPV_set(e->dataSV, (char *) ptr);
SvLEN_set(e->dataSV, 0); /* Hands off sv.c - it isn't yours */
SvCUR_set(e->dataSV,use);
SvPOK_only(e->dataSV);
}
SvUTF8_off(e->dataSV);
PUSHMARK(sp);
XPUSHs(e->enc);
XPUSHs(e->dataSV);
XPUSHs(e->chk);
PUTBACK;
if (call_method("decode", G_SCALAR) != 1) {
Perl_die(aTHX_ "panic: decode did not return a value");
}
SPAGAIN;
uni = POPs;
PUTBACK;
/* Now get translated string (forced to UTF-8) and use as buffer */
if (SvPOK(uni)) {
s = SvPVutf8(uni, len);
#ifdef PARANOID_ENCODE_CHECKS
if (len && !is_utf8_string((U8*)s,len)) {
Perl_warn(aTHX_ "panic: decode did not return UTF-8 '%.*s'",(int) len,s);
}
#endif
}
if (len > 0) {
/* Got _something */
/* if decode gave us back dataSV then data may vanish when
we do ptrcnt adjust - so take our copy now.
(The copy is a pain - need a put-it-here option for decode.)
*/
sv_setpvn(e->bufsv,s,len);
e->base.ptr = e->base.buf = (STDCHAR*)SvPVX(e->bufsv);
e->base.end = e->base.ptr + SvCUR(e->bufsv);
PerlIOBase(f)->flags |= PERLIO_F_RDBUF;
SvUTF8_on(e->bufsv);
/* Adjust ptr/cnt not taking anything which
did not translate - not clear this is a win */
/* compute amount we took */
use -= SvCUR(e->dataSV);
PerlIO_set_ptrcnt(n, ptr+use, (avail-use));
/* and as we did not take it it isn't pending */
SvCUR_set(e->dataSV,0);
} else {
/* Got nothing - assume partial character so we need some more */
/* Make sure e->dataSV is a normal SV before re-filling as
buffer alias will change under us
*/
s = SvPV(e->dataSV,len);
sv_setpvn(e->dataSV,s,len);
PerlIO_set_ptrcnt(n, ptr+use, (avail-use));
goto retry;
}
}
else {
end_of_file:
code = -1;
if (avail == 0)
PerlIOBase(f)->flags |= PERLIO_F_EOF;
else
PerlIOBase(f)->flags |= PERLIO_F_ERROR;
}
FREETMPS;
LEAVE;
POPSTACK;
return code;
}
