/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
puts_P(PSTR("Getting Device Data.\r\n"));
uint8_t ErrorCode;
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)
{
if (ErrorCode == DevControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n"));
/* Initialize the Bluetooth stack */
Bluetooth_Stack_Init();
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully
* enumerated by the host and is now ready to be used by the application.
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
puts_P(PSTR("Getting Device Data.\r\n"));
/* Get and process the configuration descriptor data */
uint8_t ErrorCode = ProcessDeviceDescriptor();
bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
/* Error out if the device is not an Android device or an error occurred */
if ((ErrorCode != AccessoryModeAndroidDevice) && (ErrorCode != NonAccessoryModeAndroidDevice))
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
/* Check if a valid Android device was attached, but it is not current in Accessory mode */
if (RequiresModeSwitch)
{
uint16_t AndroidProtocol;
/* Fetch the version of the Android Accessory Protocol supported by the device */
if ((ErrorCode = Android_GetAccessoryProtocol(&AndroidProtocol)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Get Protocol).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
/* Validate the returned protocol version */
if (AndroidProtocol != AOA_PROTOCOL_AccessoryV1)
{
puts_P(PSTR(ESC_FG_RED "Accessory Mode Not Supported."));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
/* Send the device strings and start the Android Accessory Mode */
Android_SendString(AOA_STRING_Manufacturer, "Dean Camera");
Android_SendString(AOA_STRING_Model, "LUFA Android Demo");
Android_SendString(AOA_STRING_Description, "LUFA Android Demo");
Android_SendString(AOA_STRING_Version, "1.0");
Android_SendString(AOA_STRING_URI, "http://www.lufa-lib.org");
Android_SendString(AOA_STRING_Serial, "0000000012345678");
Android_StartAccessoryMode();
return;
}
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
return;
}
puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Task to set the configuration of the attached device after it has been enumerated. */
void Bluetooth_Host_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
puts_P(PSTR("Getting Device Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessDeviceDescriptor()) != SuccessfulDeviceRead)
{
if (ErrorCode == DevControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Bluetooth Dongle Detected.\r\n"));
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Bluetooth Dongle Enumerated.\r\n"));
/* Initialize the Bluetooth stack */
Bluetooth_Stack_Init();
USB_HostState = HOST_STATE_Configured;
break;
}
}
/** Task to set the configuration of the attached device after it has been enumerated. */
void Android_Host_Task(void)
{
uint8_t ErrorCode;
switch (USB_HostState)
{
case HOST_STATE_Addressed:
puts_P(PSTR("Getting Device Data.\r\n"));
/* Get and process the configuration descriptor data */
ErrorCode = ProcessDeviceDescriptor();
/* Save whether the Android device needs to be mode-switched later on */
bool RequiresModeSwitch = (ErrorCode == NonAccessoryModeAndroidDevice);
/* Error out if the device is not an Android device or an error occurred */
if ((ErrorCode != AccessoryModeAndroidDevice) && !(RequiresModeSwitch))
{
if (ErrorCode == DevControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Device).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
printf_P(PSTR("Android Device Detected - %sAccessory mode.\r\n"), (RequiresModeSwitch ? "Non-" : ""));
/* Set the device configuration to the first configuration (rarely do devices use multiple configurations) */
if ((ErrorCode = USB_Host_SetDeviceConfiguration(1)) != HOST_SENDCONTROL_Successful)
{
printf_P(PSTR(ESC_FG_RED "Control Error (Set Configuration).\r\n"
" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
/* Check if a valid Android device was attached, but it is not current in Accessory mode */
if (RequiresModeSwitch)
{
USB_ControlRequest = (USB_Request_Header_t)
{
.bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
.bRequest = ANDROID_Req_StartAccessoryMode,
.wValue = 0,
.wIndex = 0,
.wLength = 0,
};
/* Send the control request for the Android device to switch to accessory mode */
Pipe_SelectPipe(PIPE_CONTROLPIPE);
USB_Host_SendControlRequest(NULL);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Getting Config Data.\r\n"));
/* Get and process the configuration descriptor data */
if ((ErrorCode = ProcessConfigurationDescriptor()) != SuccessfulConfigRead)
{
if (ErrorCode == ControlError)
puts_P(PSTR(ESC_FG_RED "Control Error (Get Configuration).\r\n"));
else
puts_P(PSTR(ESC_FG_RED "Invalid Device.\r\n"));
printf_P(PSTR(" -- Error Code: %d\r\n" ESC_FG_WHITE), ErrorCode);
/* Indicate error via status LEDs */
LEDs_SetAllLEDs(LEDS_LED1);
/* Wait until USB device disconnected */
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
puts_P(PSTR("Accessory Mode Android Enumerated.\r\n"));
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
/* Select the data IN pipe */
Pipe_SelectPipe(ANDROID_DATA_IN_PIPE);
Pipe_Unfreeze();
/* Check to see if a packet has been received */
if (Pipe_IsINReceived())
{
/* Re-freeze IN pipe after the packet has been received */
Pipe_Freeze();
/* Check if data is in the pipe */
if (Pipe_IsReadWriteAllowed())
{
uint8_t NextReceivedByte = Pipe_BytesInPipe();
uint8_t LEDMask = LEDS_NO_LEDS;
if (NextReceivedByte & 0x01)
LEDMask |= LEDS_LED1;
if (NextReceivedByte & 0x02)
LEDMask |= LEDS_LED2;
if (NextReceivedByte & 0x04)
LEDMask |= LEDS_LED3;
if (NextReceivedByte & 0x08)
LEDMask |= LEDS_LED4;
LEDs_SetAllLEDs(LEDMask);
}
else
{
/* Clear the pipe after all data in the packet has been read, ready for the next packet */
Pipe_ClearIN();
}
}
/* Re-freeze IN pipe after use */
Pipe_Freeze();
break;
}
}
