/*! \brief Transmits the global config struct to QTouch Studio.
*/
void Transmit_Global_Config(void)
{
#ifdef DEF_TOUCH_QDEBUG_ENABLE_MUTLCAP
touch_config_t *p_touch_config = &touch_config;
touch_mutlcap_config_t *p_mutlcap_config
= p_touch_config->p_mutlcap_config;
touch_ret_t touch_ret = TOUCH_SUCCESS;
/* get the global parameters from the library and transmit the global
* parameters to the Qtouch Studio */
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&p_mutlcap_config->global_param);
if (touch_ret != TOUCH_SUCCESS) {
while (1) {
}
}
PutChar(QT_GLOBAL_CONFIG);
PutChar(p_mutlcap_config->global_param.recal_threshold);
PutChar(p_mutlcap_config->global_param.di);
PutChar(p_mutlcap_config->global_param.drift_hold_time);
PutChar(p_mutlcap_config->global_param.max_on_duration);
PutChar(p_mutlcap_config->global_param.tch_drift_rate);
PutChar(p_mutlcap_config->global_param.atch_drift_rate);
PutChar(p_mutlcap_config->global_param.atch_recal_delay);
#endif
#ifdef DEF_TOUCH_QDEBUG_ENABLE_SELFCAP
touch_config_t *p_touch_config = &touch_config;
touch_selfcap_config_t *p_selfcap_config
= p_touch_config->p_selfcap_config;
touch_ret_t touch_ret = TOUCH_SUCCESS;
/* get the global parameters from the library and transmit the global
* parameters to the Qtouch Studio */
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&p_selfcap_config->global_param);
if (touch_ret != TOUCH_SUCCESS) {
while (1) {
}
}
PutChar(QT_GLOBAL_CONFIG);
PutChar(p_selfcap_config->global_param.recal_threshold);
PutChar(p_selfcap_config->global_param.di);
PutChar(p_selfcap_config->global_param.drift_hold_time);
PutChar(p_selfcap_config->global_param.max_on_duration);
PutChar(p_selfcap_config->global_param.tch_drift_rate);
PutChar(p_selfcap_config->global_param.atch_drift_rate);
PutChar(p_selfcap_config->global_param.atch_recal_delay);
#endif
PutInt(touch_time.measurement_period_ms);
PutInt(0); /* TICKS_PER_MS */
PutChar(0); /* Time_Setting */
Send_Message();
}
/*============================================================================
Name : Set_Global_Config
------------------------------------------------------------------------------
Purpose : Extract the data packet from QTouch Studio and set global config
Input : n/a
Output : n/a
Notes : Should only be called from the command handler
============================================================================*/
void Set_Global_Config(void)
{
touch_ret_t touch_ret = TOUCH_SUCCESS;
#if ((DEF_TOUCH_QMATRIX == 1) || \
(DEF_TOUCH_QTOUCH_GRP_A == 1) || \
(DEF_TOUCH_QTOUCH_GRP_B == 1))
touch_global_param_t global_params;
global_params.recal_threshold = (recal_threshold_t)GetChar();
global_params.di = GetChar();
global_params.drift_hold_time = GetChar();
global_params.max_on_duration = GetChar();
global_params.neg_drift_rate = GetChar();
global_params.pos_drift_rate = GetChar();
global_params.pos_recal_delay = GetChar();
/* update the global parameter value inside the uc3l library */
touch_ret = QDEBUG_UPDATE_GLOBAL_PARAM_FUNC(&global_params);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
#endif
#if DEF_TOUCH_AUTONOMOUS_QTOUCH == 1
touch_at_param_t touch_sensor_param;
uint8_t dummy_var;
/* Fill touch_sensor_param structure with default values.
This is because QTouch Studio does not provide sense and outsense
values. So these values should not be overwritten by the update API. */
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&touch_sensor_param);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
/* Update data from QTouch Studio. */
touch_sensor_param.pthr = (recal_threshold_t)GetChar();
touch_sensor_param.filter = GetChar();
dummy_var = GetChar(); /* Skip drift_hold_time. */
dummy_var = GetChar(); /* Skip max_on_duration. */
touch_sensor_param.ndrift = GetChar();
touch_sensor_param.pdrift = GetChar();
/* avoid Cppcheck Warning */
UNUSED(dummy_var);
/* update the global parameter value inside the uc3l library */
touch_ret = QDEBUG_UPDATE_GLOBAL_PARAM_FUNC(&touch_sensor_param);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
#endif
}
void Transmit_Sensor_Config(void)
{
#if ((DEF_TOUCH_QMATRIX == 1) || \
(DEF_TOUCH_QTOUCH_GRP_A == 1) || \
(DEF_TOUCH_QTOUCH_GRP_B == 1))
uint8_t c;
sensor_t *p_sensors = QDEBUG_SENSOR_PTR;
PutChar(QT_SENSOR_CONFIG);
PutChar(1); // 1 = KRS
for(c=0; c < QDEBUG_NUM_SENSORS; c++)
{
PutChar(p_sensors[c].threshold);
PutChar(p_sensors[c].type_aks_pos_hyst);
PutChar(p_sensors[c].from_channel);
PutChar(p_sensors[c].to_channel);
}
#endif
#if DEF_TOUCH_AUTONOMOUS_QTOUCH == 1
touch_at_param_t touch_sensor_param;
int16_t touch_ret;
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&touch_sensor_param);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
PutChar(QT_SENSOR_CONFIG);
PutChar(1); // 1 = KRS
PutChar(touch_sensor_param.sense);
PutChar(0u); /* type_aks_pos_hyst. */
PutChar(0u);
PutChar(0u);
#endif
Send_Message();
}
/*============================================================================
Name : Transmit_Global_Config
------------------------------------------------------------------------------
Purpose : Transmits the global config struct to QTouch Studio
Input : n/a
Output : n/a
Notes :
============================================================================*/
void Transmit_Global_Config(void)
{
int16_t touch_ret;
/* avoid Cppcheck Warning */
UNUSED(touch_ret);
#if ((DEF_TOUCH_QMATRIX == 1) || \
(DEF_TOUCH_QTOUCH_GRP_A == 1) || \
(DEF_TOUCH_QTOUCH_GRP_B == 1))
touch_global_param_t global_params;
/* get the global parameters from the library and transmit the global
parameters to the QTouch Studio */
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&global_params);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
PutChar(QT_GLOBAL_CONFIG);
PutChar(global_params.recal_threshold);
PutChar(global_params.di);
PutChar(global_params.drift_hold_time);
PutChar(global_params.max_on_duration);
PutChar(global_params.neg_drift_rate);
PutChar(global_params.pos_drift_rate);
PutChar(global_params.pos_recal_delay);
PutInt(measurement_period_ms);
PutInt(0);//TICKS_PER_MS
PutChar(0); // Time_Setting
#endif
#if DEF_TOUCH_AUTONOMOUS_QTOUCH == 1
touch_at_param_t touch_sensor_param;
/* Fill touch_sensor_param structure with default values.
This is because QTouch Studio does not provide sense and outsense
values. So these values should not be overwritten by the update API. */
touch_ret = QDEBUG_GET_GLOBAL_PARAM_FUNC(&touch_sensor_param);
if(touch_ret != TOUCH_SUCCESS)
{
while(1);
}
PutChar(QT_GLOBAL_CONFIG);
PutChar(touch_sensor_param.pthr);
PutChar(touch_sensor_param.filter);
PutChar(1u); /* Dummy. drift_hold_time. */
PutChar(0u); /* Dummy. max_on_duration. */
PutChar(touch_sensor_param.ndrift);
PutChar(touch_sensor_param.pdrift);
PutChar(1u); /* Dummy. pos_recal_delay. */
PutInt(measurement_period_ms);
PutInt(0);//TICKS_PER_MS
PutChar(0); // Time_Setting
#endif
Send_Message();
}