static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg)
{
u32 oldval = sdhci_iproc_readl(host, (reg & ~3));
u32 byte_shift = REG_OFFSET_IN_BITS(reg);
u32 mask = 0xff << byte_shift;
u32 newval = (oldval & ~mask) | (val << byte_shift);
sdhci_iproc_writel(host, newval, reg & ~3);
}
static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
u32 val;
u16 word;
if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) {
/* Get the saved transfer mode */
val = iproc_host->shadow_cmd;
} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
iproc_host->is_blk_shadowed) {
/* Get the saved block info */
val = iproc_host->shadow_blk;
} else {
val = sdhci_iproc_readl(host, (reg & ~3));
}
word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
return word;
}
/*
* The Arasan has a bugette whereby it may lose the content of successive
* writes to the same register that are within two SD-card clock cycles of
* each other (a clock domain crossing problem). The data
* register does not have this problem, which is just as well - otherwise we'd
* have to nobble the DMA engine too.
*
* This wouldn't be a problem with the code except that we can only write the
* controller with 32-bit writes. So two different 16-bit registers are
* written back to back creates the problem.
*
* In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT
* are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND.
* The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so
* the work around can be further optimized. We can keep shadow values of
* BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued.
* Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed
* by the TRANSFER+COMMAND in another 32-bit write.
*/
static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg)
{
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host);
u32 word_shift = REG_OFFSET_IN_BITS(reg);
u32 mask = 0xffff << word_shift;
u32 oldval, newval;
if (reg == SDHCI_COMMAND) {
/* Write the block now as we are issuing a command */
if (iproc_host->is_blk_shadowed) {
sdhci_iproc_writel(host, iproc_host->shadow_blk,
SDHCI_BLOCK_SIZE);
iproc_host->is_blk_shadowed = false;
}
oldval = iproc_host->shadow_cmd;
iproc_host->is_cmd_shadowed = false;
} else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) &&
iproc_host->is_blk_shadowed) {
/* Block size and count are stored in shadow reg */
oldval = iproc_host->shadow_blk;
} else {
/* Read reg, all other registers are not shadowed */
oldval = sdhci_iproc_readl(host, (reg & ~3));
}
newval = (oldval & ~mask) | (val << word_shift);
if (reg == SDHCI_TRANSFER_MODE) {
/* Save the transfer mode until the command is issued */
iproc_host->shadow_cmd = newval;
iproc_host->is_cmd_shadowed = true;
} else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) {
/* Save the block info until the command is issued */
iproc_host->shadow_blk = newval;
iproc_host->is_blk_shadowed = true;
} else {
/* Command or other regular 32-bit write */
sdhci_iproc_writel(host, newval, reg & ~3);
}
}
static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg)
{
u32 val = sdhci_iproc_readl(host, (reg & ~3));
u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff;
return byte;
}
static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg)
{
u32 val = sdhci_iproc_readl(host, (reg & ~3));
u16 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff;
return word;
}